From 93b26f172ce1e57b768c3b40153db4424c34c89d Mon Sep 17 00:00:00 2001 From: "Ryan C. Gordon" Date: Mon, 17 Feb 2020 16:15:04 -0500 Subject: [PATCH] opengl: Backed out hg changeset 94f9f40a957f This is the OpenGL line drawing fix for Bugzilla #3182, but there's some disagreement about what the renderers should do here, so I'm backing this out until after 2.0.12 ships, and then we'll reevaluate all the renderer backends to decide what's correct, and make them all work the same. --- src/render/opengl/SDL_render_gl.c | 113 +++++++++++------------- src/render/opengles/SDL_render_gles.c | 66 ++------------ src/render/opengles2/SDL_render_gles2.c | 67 +++----------- 3 files changed, 71 insertions(+), 175 deletions(-) diff --git a/src/render/opengl/SDL_render_gl.c b/src/render/opengl/SDL_render_gl.c index 41b26dfd5..133a20b0c 100644 --- a/src/render/opengl/SDL_render_gl.c +++ b/src/render/opengl/SDL_render_gl.c @@ -865,60 +865,6 @@ GL_QueueDrawPoints(SDL_Renderer * renderer, SDL_RenderCommand *cmd, const SDL_FP return 0; } -static int -GL_QueueDrawLines(SDL_Renderer * renderer, SDL_RenderCommand *cmd, const SDL_FPoint * points, int count) -{ - GLfloat *verts; - int i; - - SDL_assert(count >= 2); /* should have been checked at the higher level. */ - - verts = (GLfloat *) SDL_AllocateRenderVertices(renderer, (count-1) * 4 * sizeof (GLfloat), 0, &cmd->data.draw.first); - if (!verts) { - return -1; - } - - cmd->data.draw.count = count; - - /* GL_LINE_STRIP seems to be unreliable on various drivers, so try - to build out our own GL_LINES. :( - If the line segment is completely horizontal or vertical, - make it one pixel longer, to satisfy the diamond-exit rule. - We should probably do this for diagonal lines too, but we'd have to - do some trigonometry to figure out the correct pixel and generally - when we have problems with pixel perfection, it's for straight lines - that are missing a pixel that frames something and not arbitrary - angles. Maybe !!! FIXME for later, though. */ - - for (i = 0; i < count-1; i++, points++) { - GLfloat xstart = 0.5f + points[0].x; /* 0.5f to get to the center of the pixel. */ - GLfloat ystart = 0.5f + points[0].y; - GLfloat xend = 0.5f + points[1].x; - GLfloat yend = 0.5f + points[1].y; - - if (xstart == xend) { /* vertical line */ - if (yend > ystart) { - yend += 1.0f; - } else { - ystart += 1.0f; - } - } else if (ystart == yend) { /* horizontal line */ - if (xend > xstart) { - xend += 1.0f; - } else { - xstart += 1.0f; - } - } - - *(verts++) = xstart; - *(verts++) = ystart; - *(verts++) = xend; - *(verts++) = yend; - } - - return 0; -} - static int GL_QueueFillRects(SDL_Renderer * renderer, SDL_RenderCommand *cmd, const SDL_FRect * rects, int count) { @@ -1282,14 +1228,59 @@ GL_RunCommandQueue(SDL_Renderer * renderer, SDL_RenderCommand *cmd, void *vertic case SDL_RENDERCMD_DRAW_LINES: { const GLfloat *verts = (GLfloat *) (((Uint8 *) vertices) + cmd->data.draw.first); const size_t count = cmd->data.draw.count; - SDL_assert(count >= 2); SetDrawState(data, cmd, SHADER_SOLID); - data->glBegin(GL_LINES); - for (i = 0; i < count-1; ++i, verts += 4) { - data->glVertex2f(verts[0], verts[1]); - data->glVertex2f(verts[2], verts[3]); + if (count > 2 && (verts[0] == verts[(count-1)*2]) && (verts[1] == verts[(count*2)-1])) { + data->glBegin(GL_LINE_LOOP); + /* GL_LINE_LOOP takes care of the final segment */ + for (i = 1; i < count; ++i, verts += 2) { + data->glVertex2f(verts[0], verts[1]); + } + data->glEnd(); + } else { + #if defined(__MACOSX__) || defined(__WIN32__) + #else + int x1, y1, x2, y2; + #endif + + data->glBegin(GL_LINE_STRIP); + for (i = 0; i < count; ++i, verts += 2) { + data->glVertex2f(verts[0], verts[1]); + } + data->glEnd(); + verts -= 2 * count; + + /* The line is half open, so we need one more point to complete it. + * http://www.opengl.org/documentation/specs/version1.1/glspec1.1/node47.html + * If we have to, we can use vertical line and horizontal line textures + * for vertical and horizontal lines, and then create custom textures + * for diagonal lines and software render those. It's terrible, but at + * least it would be pixel perfect. + */ + + data->glBegin(GL_POINTS); + #if defined(__MACOSX__) || defined(__WIN32__) + /* Mac OS X and Windows seem to always leave the last point open */ + data->glVertex2f(verts[(count-1)*2], verts[(count*2)-1]); + #else + /* Linux seems to leave the right-most or bottom-most point open */ + x1 = verts[0]; + y1 = verts[1]; + x2 = verts[(count-1)*2]; + y2 = verts[(count*2)-1]; + + if (x1 > x2) { + data->glVertex2f(x1, y1); + } else if (x2 > x1) { + data->glVertex2f(x2, y2); + } + if (y1 > y2) { + data->glVertex2f(x1, y1); + } else if (y2 > y1) { + data->glVertex2f(x2, y2); + } + #endif + data->glEnd(); } - data->glEnd(); break; } @@ -1628,7 +1619,7 @@ GL_CreateRenderer(SDL_Window * window, Uint32 flags) renderer->QueueSetViewport = GL_QueueSetViewport; renderer->QueueSetDrawColor = GL_QueueSetViewport; /* SetViewport and SetDrawColor are (currently) no-ops. */ renderer->QueueDrawPoints = GL_QueueDrawPoints; - renderer->QueueDrawLines = GL_QueueDrawLines; + renderer->QueueDrawLines = GL_QueueDrawPoints; /* lines and points queue vertices the same way. */ renderer->QueueFillRects = GL_QueueFillRects; renderer->QueueCopy = GL_QueueCopy; renderer->QueueCopyEx = GL_QueueCopyEx; diff --git a/src/render/opengles/SDL_render_gles.c b/src/render/opengles/SDL_render_gles.c index 387acf386..044a1be61 100644 --- a/src/render/opengles/SDL_render_gles.c +++ b/src/render/opengles/SDL_render_gles.c @@ -561,60 +561,6 @@ GLES_QueueDrawPoints(SDL_Renderer * renderer, SDL_RenderCommand *cmd, const SDL_ return 0; } -static int -GLES_QueueDrawLines(SDL_Renderer * renderer, SDL_RenderCommand *cmd, const SDL_FPoint * points, int count) -{ - GLfloat *verts; - int i; - - SDL_assert(count >= 2); /* should have been checked at the higher level. */ - - verts = (GLfloat *) SDL_AllocateRenderVertices(renderer, (count-1) * 4 * sizeof (GLfloat), 0, &cmd->data.draw.first); - if (!verts) { - return -1; - } - - cmd->data.draw.count = count; - - /* GL_LINE_STRIP seems to be unreliable on various drivers, so try - to build out our own GL_LINES. :( - If the line segment is completely horizontal or vertical, - make it one pixel longer, to satisfy the diamond-exit rule. - We should probably do this for diagonal lines too, but we'd have to - do some trigonometry to figure out the correct pixel and generally - when we have problems with pixel perfection, it's for straight lines - that are missing a pixel that frames something and not arbitrary - angles. Maybe !!! FIXME for later, though. */ - - for (i = 0; i < count-1; i++, points++) { - GLfloat xstart = 0.5f + points[0].x; /* 0.5f to get to the center of the pixel. */ - GLfloat ystart = 0.5f + points[0].y; - GLfloat xend = 0.5f + points[1].x; - GLfloat yend = 0.5f + points[1].y; - - if (xstart == xend) { /* vertical line */ - if (yend > ystart) { - yend += 1.0f; - } else { - ystart += 1.0f; - } - } else if (ystart == yend) { /* horizontal line */ - if (xend > xstart) { - xend += 1.0f; - } else { - xstart += 1.0f; - } - } - - *(verts++) = xstart; - *(verts++) = ystart; - *(verts++) = xend; - *(verts++) = yend; - } - - return 0; -} - static int GLES_QueueFillRects(SDL_Renderer * renderer, SDL_RenderCommand *cmd, const SDL_FRect * rects, int count) { @@ -955,10 +901,16 @@ GLES_RunCommandQueue(SDL_Renderer * renderer, SDL_RenderCommand *cmd, void *vert case SDL_RENDERCMD_DRAW_LINES: { const GLfloat *verts = (GLfloat *) (((Uint8 *) vertices) + cmd->data.draw.first); const size_t count = cmd->data.draw.count; - SDL_assert(count >= 2); SetDrawState(data, cmd); data->glVertexPointer(2, GL_FLOAT, 0, verts); - data->glDrawArrays(GL_LINES, 0, (GLsizei) ((count-1) * 2)); + if (count > 2 && (verts[0] == verts[(count-1)*2]) && (verts[1] == verts[(count*2)-1])) { + /* GL_LINE_LOOP takes care of the final segment */ + data->glDrawArrays(GL_LINE_LOOP, 0, (GLsizei) (count - 1)); + } else { + data->glDrawArrays(GL_LINE_STRIP, 0, (GLsizei) count); + /* We need to close the endpoint of the line */ + data->glDrawArrays(GL_POINTS, (GLsizei) (count - 1), 1); + } break; } @@ -1207,7 +1159,7 @@ GLES_CreateRenderer(SDL_Window * window, Uint32 flags) renderer->QueueSetViewport = GLES_QueueSetViewport; renderer->QueueSetDrawColor = GLES_QueueSetViewport; /* SetViewport and SetDrawColor are (currently) no-ops. */ renderer->QueueDrawPoints = GLES_QueueDrawPoints; - renderer->QueueDrawLines = GLES_QueueDrawLines; + renderer->QueueDrawLines = GLES_QueueDrawPoints; /* lines and points queue vertices the same way. */ renderer->QueueFillRects = GLES_QueueFillRects; renderer->QueueCopy = GLES_QueueCopy; renderer->QueueCopyEx = GLES_QueueCopyEx; diff --git a/src/render/opengles2/SDL_render_gles2.c b/src/render/opengles2/SDL_render_gles2.c index 0a432e04a..fb83c875d 100644 --- a/src/render/opengles2/SDL_render_gles2.c +++ b/src/render/opengles2/SDL_render_gles2.c @@ -783,60 +783,6 @@ GLES2_QueueDrawPoints(SDL_Renderer * renderer, SDL_RenderCommand *cmd, const SDL return 0; } -static int -GLES2_QueueDrawLines(SDL_Renderer * renderer, SDL_RenderCommand *cmd, const SDL_FPoint * points, int count) -{ - GLfloat *verts; - int i; - - SDL_assert(count >= 2); /* should have been checked at the higher level. */ - - verts = (GLfloat *) SDL_AllocateRenderVertices(renderer, (count-1) * 4 * sizeof (GLfloat), 0, &cmd->data.draw.first); - if (!verts) { - return -1; - } - - cmd->data.draw.count = count; - - /* GL_LINE_STRIP seems to be unreliable on various drivers, so try - to build out our own GL_LINES. :( - If the line segment is completely horizontal or vertical, - make it one pixel longer, to satisfy the diamond-exit rule. - We should probably do this for diagonal lines too, but we'd have to - do some trigonometry to figure out the correct pixel and generally - when we have problems with pixel perfection, it's for straight lines - that are missing a pixel that frames something and not arbitrary - angles. Maybe !!! FIXME for later, though. */ - - for (i = 0; i < count-1; i++, points++) { - GLfloat xstart = 0.5f + points[0].x; /* 0.5f to get to the center of the pixel. */ - GLfloat ystart = 0.5f + points[0].y; - GLfloat xend = 0.5f + points[1].x; - GLfloat yend = 0.5f + points[1].y; - - if (xstart == xend) { /* vertical line */ - if (yend > ystart) { - yend += 1.0f; - } else { - ystart += 1.0f; - } - } else if (ystart == yend) { /* horizontal line */ - if (xend > xstart) { - xend += 1.0f; - } else { - xstart += 1.0f; - } - } - - *(verts++) = xstart; - *(verts++) = ystart; - *(verts++) = xend; - *(verts++) = yend; - } - - return 0; -} - static int GLES2_QueueFillRects(SDL_Renderer * renderer, SDL_RenderCommand *cmd, const SDL_FRect * rects, int count) { @@ -1348,10 +1294,17 @@ GLES2_RunCommandQueue(SDL_Renderer * renderer, SDL_RenderCommand *cmd, void *ver } case SDL_RENDERCMD_DRAW_LINES: { + const GLfloat *verts = (GLfloat *) (((Uint8 *) vertices) + cmd->data.draw.first); const size_t count = cmd->data.draw.count; - SDL_assert(count >= 2); if (SetDrawState(data, cmd, GLES2_IMAGESOURCE_SOLID) == 0) { - data->glDrawArrays(GL_LINES, 0, (GLsizei) ((count-1) * 2)); + if (count > 2 && (verts[0] == verts[(count-1)*2]) && (verts[1] == verts[(count*2)-1])) { + /* GL_LINE_LOOP takes care of the final segment */ + data->glDrawArrays(GL_LINE_LOOP, 0, (GLsizei) (count - 1)); + } else { + data->glDrawArrays(GL_LINE_STRIP, 0, (GLsizei) count); + /* We need to close the endpoint of the line */ + data->glDrawArrays(GL_POINTS, (GLsizei) (count - 1), 1); + } } break; } @@ -2146,7 +2099,7 @@ GLES2_CreateRenderer(SDL_Window *window, Uint32 flags) renderer->QueueSetViewport = GLES2_QueueSetViewport; renderer->QueueSetDrawColor = GLES2_QueueSetViewport; /* SetViewport and SetDrawColor are (currently) no-ops. */ renderer->QueueDrawPoints = GLES2_QueueDrawPoints; - renderer->QueueDrawLines = GLES2_QueueDrawLines; + renderer->QueueDrawLines = GLES2_QueueDrawPoints; /* lines and points queue vertices the same way. */ renderer->QueueFillRects = GLES2_QueueFillRects; renderer->QueueCopy = GLES2_QueueCopy; renderer->QueueCopyEx = GLES2_QueueCopyEx;