encounter
/
dawn-cmake
mirror of https://github.com/encounter/dawn-cmake.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
dawn-cmake/test/vk-gl-cts/graphicsfuzz/spv-double-branch-to-same-b.../1.wgsl.expected.spvasm

657 lines
24 KiB
Plaintext
Raw Normal View History

Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
; SPIR-V
; Version: 1.3
; Generator: Google Tint Compiler; 0
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
; Bound: 420
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
; Schema: 0
OpCapability Shader
%180 = OpExtInstImport "GLSL.std.450"
OpMemoryModel Logical GLSL450
OpEntryPoint Fragment %main "main" %tint_symbol %tint_symbol_2
OpExecutionMode %main OriginUpperLeft
OpName %data "data"
OpName %temp "temp"
OpName %buf0 "buf0"
OpMemberName %buf0 0 "injectionSwitch"
OpName %x_28 "x_28"
OpName %gl_FragCoord "gl_FragCoord"
OpName %x_GLF_color "x_GLF_color"
OpName %buf1 "buf1"
OpMemberName %buf1 0 "resolution"
OpName %x_32 "x_32"
OpName %tint_symbol "tint_symbol"
OpName %tint_symbol_2 "tint_symbol_2"
OpName %merge_i1_i1_i1_ "merge_i1_i1_i1_"
OpName %from "from"
OpName %mid "mid"
OpName %to "to"
OpName %k "k"
OpName %i "i"
OpName %j "j"
OpName %i_1 "i_1"
OpName %mergeSort_ "mergeSort_"
OpName %low "low"
OpName %high "high"
OpName %m "m"
OpName %i_2 "i_2"
OpName %from_1 "from_1"
OpName %mid_1 "mid_1"
OpName %to_1 "to_1"
OpName %param "param"
OpName %param_1 "param_1"
OpName %param_2 "param_2"
OpName %main_1 "main_1"
OpName %i_3 "i_3"
OpName %j_1 "j_1"
OpName %grey "grey"
OpName %main_out "main_out"
OpMemberName %main_out 0 "x_GLF_color_1"
OpName %tint_symbol_3 "tint_symbol_3"
OpName %tint_symbol_1 "tint_symbol_1"
OpName %main "main"
OpDecorate %_arr_int_uint_10 ArrayStride 4
OpDecorate %buf0 Block
OpMemberDecorate %buf0 0 Offset 0
OpDecorate %x_28 NonWritable
OpDecorate %x_28 DescriptorSet 0
OpDecorate %x_28 Binding 0
OpDecorate %buf1 Block
OpMemberDecorate %buf1 0 Offset 0
OpDecorate %x_32 NonWritable
OpDecorate %x_32 DescriptorSet 0
OpDecorate %x_32 Binding 1
OpDecorate %tint_symbol BuiltIn FragCoord
OpDecorate %tint_symbol_2 Location 0
OpMemberDecorate %main_out 0 Offset 0
%int = OpTypeInt 32 1
%uint = OpTypeInt 32 0
%uint_10 = OpConstant %uint 10
%_arr_int_uint_10 = OpTypeArray %int %uint_10
%_ptr_Private__arr_int_uint_10 = OpTypePointer Private %_arr_int_uint_10
%7 = OpConstantNull %_arr_int_uint_10
%data = OpVariable %_ptr_Private__arr_int_uint_10 Private %7
%temp = OpVariable %_ptr_Private__arr_int_uint_10 Private %7
%float = OpTypeFloat 32
%v2float = OpTypeVector %float 2
%buf0 = OpTypeStruct %v2float
%_ptr_Uniform_buf0 = OpTypePointer Uniform %buf0
%x_28 = OpVariable %_ptr_Uniform_buf0 Uniform
%v4float = OpTypeVector %float 4
%_ptr_Private_v4float = OpTypePointer Private %v4float
%17 = OpConstantNull %v4float
%gl_FragCoord = OpVariable %_ptr_Private_v4float Private %17
%x_GLF_color = OpVariable %_ptr_Private_v4float Private %17
%buf1 = OpTypeStruct %v2float
%_ptr_Uniform_buf1 = OpTypePointer Uniform %buf1
%x_32 = OpVariable %_ptr_Uniform_buf1 Uniform
%_ptr_Input_v4float = OpTypePointer Input %v4float
%tint_symbol = OpVariable %_ptr_Input_v4float Input
%_ptr_Output_v4float = OpTypePointer Output %v4float
%tint_symbol_2 = OpVariable %_ptr_Output_v4float Output %17
%void = OpTypeVoid
%_ptr_Function_int = OpTypePointer Function %int
%26 = OpTypeFunction %void %_ptr_Function_int %_ptr_Function_int %_ptr_Function_int
%35 = OpConstantNull %int
%int_1 = OpConstant %int 1
%bool = OpTypeBool
%_ptr_Private_int = OpTypePointer Private %int
%int_10 = OpConstant %int 10
%135 = OpTypeFunction %void
%int_0 = OpConstant %int 0
%int_9 = OpConstant %int 9
%int_2 = OpConstant %int 2
%_ptr_Function_float = OpTypePointer Function %float
%204 = OpConstantNull %float
%uint_0 = OpConstant %uint 0
%_ptr_Uniform_float = OpTypePointer Uniform %float
%int_n5 = OpConstant %int -5
%true = OpConstantTrue %bool
%int_n4 = OpConstant %int -4
%int_n3 = OpConstant %int -3
%int_n2 = OpConstant %int -2
%int_n1 = OpConstant %int -1
%int_3 = OpConstant %int 3
%int_4 = OpConstant %int 4
%uint_1 = OpConstant %uint 1
%_ptr_Private_float = OpTypePointer Private %float
%int_30 = OpConstant %int 30
%float_0_5 = OpConstant %float 0.5
%float_10 = OpConstant %float 10
%int_60 = OpConstant %int 60
%int_90 = OpConstant %int 90
%int_120 = OpConstant %int 120
%int_150 = OpConstant %int 150
%int_180 = OpConstant %int 180
%int_5 = OpConstant %int 5
%int_210 = OpConstant %int 210
%int_6 = OpConstant %int 6
%int_240 = OpConstant %int 240
%int_7 = OpConstant %int 7
%int_270 = OpConstant %int 270
%int_8 = OpConstant %int 8
%v3float = OpTypeVector %float 3
%float_1 = OpConstant %float 1
%main_out = OpTypeStruct %v4float
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%407 = OpTypeFunction %void %main_out
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%merge_i1_i1_i1_ = OpFunction %void None %26
%from = OpFunctionParameter %_ptr_Function_int
%mid = OpFunctionParameter %_ptr_Function_int
%to = OpFunctionParameter %_ptr_Function_int
%33 = OpLabel
%k = OpVariable %_ptr_Function_int Function %35
%i = OpVariable %_ptr_Function_int Function %35
%j = OpVariable %_ptr_Function_int Function %35
%i_1 = OpVariable %_ptr_Function_int Function %35
%40 = OpLoad %int %from
OpStore %k %40
%42 = OpLoad %int %from
OpStore %i %42
%44 = OpLoad %int %mid
%46 = OpIAdd %int %44 %int_1
OpStore %j %46
OpBranch %47
%47 = OpLabel
OpLoopMerge %48 %49 None
OpBranch %50
%50 = OpLabel
%51 = OpLoad %int %i
%53 = OpLoad %int %mid
%54 = OpLoad %int %j
%56 = OpLoad %int %to
%57 = OpSLessThanEqual %bool %51 %53
OpSelectionMerge %59 None
OpBranchConditional %57 %60 %59
%60 = OpLabel
%61 = OpSLessThanEqual %bool %54 %56
OpBranch %59
%59 = OpLabel
%62 = OpPhi %bool %57 %50 %61 %60
OpSelectionMerge %63 None
OpBranchConditional %62 %64 %65
%64 = OpLabel
OpBranch %63
%65 = OpLabel
OpBranch %48
%63 = OpLabel
%66 = OpLoad %int %i
%68 = OpAccessChain %_ptr_Private_int %data %66
%69 = OpLoad %int %68
%70 = OpLoad %int %j
%71 = OpAccessChain %_ptr_Private_int %data %70
%72 = OpLoad %int %71
%73 = OpSLessThan %bool %69 %72
OpSelectionMerge %74 None
OpBranchConditional %73 %75 %76
%75 = OpLabel
%77 = OpLoad %int %k
%78 = OpIAdd %int %77 %int_1
OpStore %k %78
%79 = OpLoad %int %i
%80 = OpIAdd %int %79 %int_1
OpStore %i %80
%81 = OpAccessChain %_ptr_Private_int %data %79
%82 = OpLoad %int %81
%83 = OpAccessChain %_ptr_Private_int %temp %77
OpStore %83 %82
OpBranch %74
%76 = OpLabel
%84 = OpLoad %int %k
%85 = OpIAdd %int %84 %int_1
OpStore %k %85
%86 = OpLoad %int %j
%87 = OpIAdd %int %86 %int_1
OpStore %j %87
%88 = OpAccessChain %_ptr_Private_int %data %86
%89 = OpLoad %int %88
%90 = OpAccessChain %_ptr_Private_int %temp %84
OpStore %90 %89
OpBranch %74
%74 = OpLabel
OpBranch %49
%49 = OpLabel
OpBranch %47
%48 = OpLabel
OpBranch %91
%91 = OpLabel
OpLoopMerge %92 %93 None
OpBranch %94
%94 = OpLabel
%95 = OpLoad %int %i
%96 = OpLoad %int %i
%98 = OpLoad %int %mid
%100 = OpSLessThan %bool %95 %int_10
OpSelectionMerge %101 None
OpBranchConditional %100 %102 %101
%102 = OpLabel
%103 = OpSLessThanEqual %bool %96 %98
OpBranch %101
%101 = OpLabel
%104 = OpPhi %bool %100 %94 %103 %102
OpSelectionMerge %105 None
OpBranchConditional %104 %106 %107
%106 = OpLabel
OpBranch %105
%107 = OpLabel
OpBranch %92
%105 = OpLabel
%108 = OpLoad %int %k
%109 = OpIAdd %int %108 %int_1
OpStore %k %109
%110 = OpLoad %int %i
%111 = OpIAdd %int %110 %int_1
OpStore %i %111
%112 = OpAccessChain %_ptr_Private_int %data %110
%113 = OpLoad %int %112
%114 = OpAccessChain %_ptr_Private_int %temp %108
OpStore %114 %113
OpBranch %93
%93 = OpLabel
OpBranch %91
%92 = OpLabel
%116 = OpLoad %int %from
OpStore %i_1 %116
OpBranch %117
%117 = OpLabel
OpLoopMerge %118 %119 None
OpBranch %120
%120 = OpLabel
%121 = OpLoad %int %i_1
%123 = OpLoad %int %to
%124 = OpSLessThanEqual %bool %121 %123
OpSelectionMerge %125 None
OpBranchConditional %124 %126 %127
%126 = OpLabel
OpBranch %125
%127 = OpLabel
OpBranch %118
%125 = OpLabel
%128 = OpLoad %int %i_1
%129 = OpLoad %int %i_1
%130 = OpAccessChain %_ptr_Private_int %temp %129
%131 = OpLoad %int %130
%132 = OpAccessChain %_ptr_Private_int %data %128
OpStore %132 %131
OpBranch %119
%119 = OpLabel
%133 = OpLoad %int %i_1
%134 = OpIAdd %int %133 %int_1
OpStore %i_1 %134
OpBranch %117
%118 = OpLabel
OpReturn
OpFunctionEnd
%mergeSort_ = OpFunction %void None %135
%137 = OpLabel
%low = OpVariable %_ptr_Function_int Function %35
%high = OpVariable %_ptr_Function_int Function %35
%m = OpVariable %_ptr_Function_int Function %35
%i_2 = OpVariable %_ptr_Function_int Function %35
%from_1 = OpVariable %_ptr_Function_int Function %35
%mid_1 = OpVariable %_ptr_Function_int Function %35
%to_1 = OpVariable %_ptr_Function_int Function %35
%param = OpVariable %_ptr_Function_int Function %35
%param_1 = OpVariable %_ptr_Function_int Function %35
%param_2 = OpVariable %_ptr_Function_int Function %35
OpStore %low %int_0
OpStore %high %int_9
OpStore %m %int_1
OpBranch %150
%150 = OpLabel
OpLoopMerge %151 %152 None
OpBranch %153
%153 = OpLabel
%154 = OpLoad %int %m
%155 = OpLoad %int %high
%156 = OpSLessThanEqual %bool %154 %155
OpSelectionMerge %157 None
OpBranchConditional %156 %158 %159
%158 = OpLabel
OpBranch %157
%159 = OpLabel
OpBranch %151
%157 = OpLabel
%160 = OpLoad %int %low
OpStore %i_2 %160
OpBranch %161
%161 = OpLabel
OpLoopMerge %162 %163 None
OpBranch %164
%164 = OpLabel
%165 = OpLoad %int %i_2
%166 = OpLoad %int %high
%167 = OpSLessThan %bool %165 %166
OpSelectionMerge %168 None
OpBranchConditional %167 %169 %170
%169 = OpLabel
OpBranch %168
%170 = OpLabel
OpBranch %162
%168 = OpLabel
%171 = OpLoad %int %i_2
OpStore %from_1 %171
%172 = OpLoad %int %i_2
%173 = OpLoad %int %m
%174 = OpIAdd %int %172 %173
%175 = OpISub %int %174 %int_1
OpStore %mid_1 %175
%176 = OpLoad %int %i_2
%177 = OpLoad %int %m
%178 = OpLoad %int %high
%182 = OpIMul %int %int_2 %177
%183 = OpIAdd %int %176 %182
%184 = OpISub %int %183 %int_1
%179 = OpExtInst %int %180 SMin %184 %178
OpStore %to_1 %179
%185 = OpLoad %int %from_1
OpStore %param %185
%186 = OpLoad %int %mid_1
OpStore %param_1 %186
%187 = OpLoad %int %to_1
OpStore %param_2 %187
%188 = OpFunctionCall %void %merge_i1_i1_i1_ %param %param_1 %param_2
OpBranch %163
%163 = OpLabel
%192 = OpLoad %int %m
%193 = OpLoad %int %i_2
%194 = OpIMul %int %int_2 %192
%195 = OpIAdd %int %193 %194
OpStore %i_2 %195
OpBranch %161
%162 = OpLabel
OpBranch %152
%152 = OpLabel
%196 = OpLoad %int %m
%197 = OpIMul %int %int_2 %196
OpStore %m %197
OpBranch %150
%151 = OpLabel
OpReturn
OpFunctionEnd
%main_1 = OpFunction %void None %135
%199 = OpLabel
%i_3 = OpVariable %_ptr_Function_int Function %35
%j_1 = OpVariable %_ptr_Function_int Function %35
%grey = OpVariable %_ptr_Function_float Function %204
%207 = OpAccessChain %_ptr_Uniform_float %x_28 %uint_0 %uint_0
%208 = OpLoad %float %207
%209 = OpConvertFToS %int %208
OpStore %i_3 %209
OpBranch %210
%210 = OpLabel
OpLoopMerge %211 %212 None
OpBranch %213
%213 = OpLabel
%214 = OpLoad %int %i_3
OpSelectionMerge %215 None
OpSwitch %214 %216 9 %217 8 %218 7 %219 6 %220 5 %221 4 %222 3 %223 2 %224 1 %225 0 %226
%217 = OpLabel
%227 = OpLoad %int %i_3
%228 = OpAccessChain %_ptr_Private_int %data %227
OpStore %228 %int_n5
OpSelectionMerge %231 None
OpBranchConditional %true %232 %233
%232 = OpLabel
OpBranch %231
%233 = OpLabel
OpBranch %212
%231 = OpLabel
OpBranch %215
%218 = OpLabel
%234 = OpLoad %int %i_3
%235 = OpAccessChain %_ptr_Private_int %data %234
OpStore %235 %int_n4
OpBranch %215
%219 = OpLabel
%237 = OpLoad %int %i_3
%238 = OpAccessChain %_ptr_Private_int %data %237
OpStore %238 %int_n3
OpBranch %215
%220 = OpLabel
%240 = OpLoad %int %i_3
%241 = OpAccessChain %_ptr_Private_int %data %240
OpStore %241 %int_n2
OpBranch %215
%221 = OpLabel
%243 = OpLoad %int %i_3
%244 = OpAccessChain %_ptr_Private_int %data %243
OpStore %244 %int_n1
OpBranch %215
%222 = OpLabel
%246 = OpLoad %int %i_3
%247 = OpAccessChain %_ptr_Private_int %data %246
OpStore %247 %int_0
OpBranch %215
%223 = OpLabel
%248 = OpLoad %int %i_3
%249 = OpAccessChain %_ptr_Private_int %data %248
OpStore %249 %int_1
OpBranch %215
%224 = OpLabel
%250 = OpLoad %int %i_3
%251 = OpAccessChain %_ptr_Private_int %data %250
OpStore %251 %int_2
OpBranch %215
%225 = OpLabel
%252 = OpLoad %int %i_3
%253 = OpAccessChain %_ptr_Private_int %data %252
OpStore %253 %int_3
OpBranch %215
%226 = OpLabel
%255 = OpLoad %int %i_3
%256 = OpAccessChain %_ptr_Private_int %data %255
OpStore %256 %int_4
OpBranch %215
%216 = OpLabel
OpBranch %215
%215 = OpLabel
%258 = OpLoad %int %i_3
%259 = OpIAdd %int %258 %int_1
OpStore %i_3 %259
OpBranch %212
%212 = OpLabel
%260 = OpLoad %int %i_3
%261 = OpSLessThan %bool %260 %int_10
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranchConditional %261 %210 %211
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%211 = OpLabel
OpStore %j_1 %int_0
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranch %262
%262 = OpLabel
OpLoopMerge %263 %264 None
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %265
%265 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%266 = OpLoad %int %j_1
%267 = OpSLessThan %bool %266 %int_10
OpSelectionMerge %268 None
OpBranchConditional %267 %269 %270
%269 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %268
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%270 = OpLabel
OpBranch %263
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%268 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%271 = OpLoad %int %j_1
%272 = OpLoad %int %j_1
%273 = OpAccessChain %_ptr_Private_int %data %272
%274 = OpLoad %int %273
%275 = OpAccessChain %_ptr_Private_int %temp %271
OpStore %275 %274
OpBranch %264
%264 = OpLabel
%276 = OpLoad %int %j_1
%277 = OpIAdd %int %276 %int_1
OpStore %j_1 %277
OpBranch %262
%263 = OpLabel
%278 = OpFunctionCall %void %mergeSort_
%281 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%282 = OpLoad %float %281
%283 = OpConvertFToS %int %282
%285 = OpSLessThan %bool %283 %int_30
OpSelectionMerge %286 None
OpBranchConditional %285 %287 %288
%287 = OpLabel
%289 = OpAccessChain %_ptr_Private_int %data %int_0
%290 = OpLoad %int %289
%292 = OpConvertSToF %float %290
%294 = OpFDiv %float %292 %float_10
%295 = OpFAdd %float %float_0_5 %294
OpStore %grey %295
OpBranch %286
%288 = OpLabel
%296 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%297 = OpLoad %float %296
%298 = OpConvertFToS %int %297
%300 = OpSLessThan %bool %298 %int_60
OpSelectionMerge %301 None
OpBranchConditional %300 %302 %303
%302 = OpLabel
%304 = OpAccessChain %_ptr_Private_int %data %int_1
%305 = OpLoad %int %304
%306 = OpConvertSToF %float %305
%307 = OpFDiv %float %306 %float_10
%308 = OpFAdd %float %float_0_5 %307
OpStore %grey %308
OpBranch %301
%303 = OpLabel
%309 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%310 = OpLoad %float %309
%311 = OpConvertFToS %int %310
%313 = OpSLessThan %bool %311 %int_90
OpSelectionMerge %314 None
OpBranchConditional %313 %315 %316
%315 = OpLabel
%317 = OpAccessChain %_ptr_Private_int %data %int_2
%318 = OpLoad %int %317
%319 = OpConvertSToF %float %318
%320 = OpFDiv %float %319 %float_10
%321 = OpFAdd %float %float_0_5 %320
OpStore %grey %321
OpBranch %314
%316 = OpLabel
%322 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%323 = OpLoad %float %322
%324 = OpConvertFToS %int %323
%326 = OpSLessThan %bool %324 %int_120
OpSelectionMerge %327 None
OpBranchConditional %326 %328 %329
%328 = OpLabel
%330 = OpAccessChain %_ptr_Private_int %data %int_3
%331 = OpLoad %int %330
%332 = OpConvertSToF %float %331
%333 = OpFDiv %float %332 %float_10
%334 = OpFAdd %float %float_0_5 %333
OpStore %grey %334
OpBranch %327
%329 = OpLabel
%335 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%336 = OpLoad %float %335
%337 = OpConvertFToS %int %336
%339 = OpSLessThan %bool %337 %int_150
OpSelectionMerge %340 None
OpBranchConditional %339 %341 %342
%341 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpKill
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%342 = OpLabel
%343 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%344 = OpLoad %float %343
%345 = OpConvertFToS %int %344
%347 = OpSLessThan %bool %345 %int_180
OpSelectionMerge %348 None
OpBranchConditional %347 %349 %350
%349 = OpLabel
%352 = OpAccessChain %_ptr_Private_int %data %int_5
%353 = OpLoad %int %352
%354 = OpConvertSToF %float %353
%355 = OpFDiv %float %354 %float_10
%356 = OpFAdd %float %float_0_5 %355
OpStore %grey %356
OpBranch %348
%350 = OpLabel
%357 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%358 = OpLoad %float %357
%359 = OpConvertFToS %int %358
%361 = OpSLessThan %bool %359 %int_210
OpSelectionMerge %362 None
OpBranchConditional %361 %363 %364
%363 = OpLabel
%366 = OpAccessChain %_ptr_Private_int %data %int_6
%367 = OpLoad %int %366
%368 = OpConvertSToF %float %367
%369 = OpFDiv %float %368 %float_10
%370 = OpFAdd %float %float_0_5 %369
OpStore %grey %370
OpBranch %362
%364 = OpLabel
%371 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%372 = OpLoad %float %371
%373 = OpConvertFToS %int %372
%375 = OpSLessThan %bool %373 %int_240
OpSelectionMerge %376 None
OpBranchConditional %375 %377 %378
%377 = OpLabel
%380 = OpAccessChain %_ptr_Private_int %data %int_7
%381 = OpLoad %int %380
%382 = OpConvertSToF %float %381
%383 = OpFDiv %float %382 %float_10
%384 = OpFAdd %float %float_0_5 %383
OpStore %grey %384
OpBranch %376
%378 = OpLabel
%385 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%386 = OpLoad %float %385
%387 = OpConvertFToS %int %386
%389 = OpSLessThan %bool %387 %int_270
OpSelectionMerge %390 None
OpBranchConditional %389 %391 %392
%391 = OpLabel
%394 = OpAccessChain %_ptr_Private_int %data %int_8
%395 = OpLoad %int %394
%396 = OpConvertSToF %float %395
%397 = OpFDiv %float %396 %float_10
%398 = OpFAdd %float %float_0_5 %397
OpStore %grey %398
OpBranch %390
%392 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpKill
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%390 = OpLabel
OpBranch %376
%376 = OpLabel
OpBranch %362
%362 = OpLabel
OpBranch %348
%348 = OpLabel
OpBranch %340
%340 = OpLabel
OpBranch %327
%327 = OpLabel
OpBranch %314
%314 = OpLabel
OpBranch %301
%301 = OpLabel
OpBranch %286
%286 = OpLabel
%399 = OpLoad %float %grey
%401 = OpCompositeConstruct %v3float %399 %399 %399
%402 = OpCompositeExtract %float %401 0
%403 = OpCompositeExtract %float %401 1
%404 = OpCompositeExtract %float %401 2
%406 = OpCompositeConstruct %v4float %402 %403 %404 %float_1
OpStore %x_GLF_color %406
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpReturn
OpFunctionEnd
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%tint_symbol_3 = OpFunction %void None %407
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%tint_symbol_1 = OpFunctionParameter %main_out
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%411 = OpLabel
%412 = OpCompositeExtract %v4float %tint_symbol_1 0
OpStore %tint_symbol_2 %412
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpReturn
OpFunctionEnd
%main = OpFunction %void None %135
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%414 = OpLabel
%415 = OpLoad %v4float %tint_symbol
OpStore %gl_FragCoord %415
%416 = OpFunctionCall %void %main_1
%418 = OpLoad %v4float %x_GLF_color
%419 = OpCompositeConstruct %main_out %418
%417 = OpFunctionCall %void %tint_symbol_3 %419
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpReturn
OpFunctionEnd