- Since we were recording everything, the sparse representation caused uninitialized data to be recorded in the cache key causing cache key inequality at times.
Bug: dawn:549
Change-Id: I7dc3ea34a7dd91addc7b5ca52c79b3354733966b
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87609
Reviewed-by: Austin Eng <enga@chromium.org>
Commit-Queue: Loko Kung <lokokung@google.com>
Kokoro: Kokoro <noreply+kokoro@google.com>
Add deps to remove_stale_autogen_files to make sure
tint_ast_fuzzer_proto runs after remove_stale_autogen_files run.
Bug: crbug.com/1314527
Change-Id: I01cb469289eae83b04c9b442f97d4eef0139ec81
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87922
Reviewed-by: Dan Sinclair <dsinclair@chromium.org>
Commit-Queue: Ben Clayton <bclayton@google.com>
Kokoro: Kokoro <noreply+kokoro@google.com>
Adds configurable gamma and gamut correction in Tint's external texture
transform. Adds constants in Dawn to perform correct conversion from
BT.709 to sRGB.
Bug: dawn:1082
Change-Id: Id5eecc37f0224541bf36e2f9757e7e2047e4b66b
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87666
Kokoro: Kokoro <noreply+kokoro@google.com>
Reviewed-by: Ben Clayton <bclayton@google.com>
Commit-Queue: Brandon1 Jones <brandon1.jones@intel.com>
The import target does not exist in the tint repo.
This import is only used inside the `build_with_chromium` condition, so move the import into the condition.
Bug: crbug.com/1314527
Change-Id: I20051d63df9134e2dc5773f26cf2f8ee4df2354e
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87860
Kokoro: Kokoro <noreply+kokoro@google.com>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Ben Clayton <bclayton@google.com>
• Fix up various references of 'tint' to 'dawn' post-migration.
• Round the CPU speed to 100MHz. This appears to fluctuate on reboots
for some machines.
• Fix git.Log() - the Count was trimming from the wrong end, leading
to perfmon spamming the github repo with repeat results.
• Instead of using google-benchmark's `--benchmark_repetitions` flag
for repeating benchmarks, calculate averages by re-running the
benchmark executable. Use '--benchmark_enable_random_interleaving'
to randomize the order in which benchmarks are run, which greatly
helps reduce noise in the averaged results.
• If the host machine supports CPU temperature sensors, wait for
thermals to stabilise before running the benchmarks. Further helps
reduce result noise.
• Breakout of the historic benchmarking loop every 15 minutes to check
for new Gerrit changes to benchmark.
• When idle, attempt to re-benchmark historic results that are 'spiky'
to reduce noise in the graphs.
• Specify more CMake flags to avoid building non-benchmark executables.
• Update the default base change for historic results. Attempting to
use the old hash, which was prior to the tint -> dawn merge makes,
the git log go back to T0 on the dawn branch. We don't want to
benchmark nearly 3k changes.
Change-Id: I8e59c7838720eb8bd11f217e9bd3104ba1eb51c3
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87642
Kokoro: Kokoro <noreply+kokoro@google.com>
Reviewed-by: Antonio Maiorano <amaiorano@google.com>
Commit-Queue: Ben Clayton <bclayton@google.com>
This PR adds the --quite flag into the CTS runner command line. This
will suppress the summary information and the duplicate failure
information as it's already output by the run-cts test runner.
Change-Id: I4e885d416c7ab679551e76f3fc702aa7b5a3535f
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87900
Commit-Queue: Dan Sinclair <dsinclair@chromium.org>
Auto-Submit: Dan Sinclair <dsinclair@chromium.org>
Reviewed-by: Ben Clayton <bclayton@google.com>
Commit-Queue: Ben Clayton <bclayton@google.com>
BUG=chromium:1318665
Change-Id: Ia312df037efef68bef038941719d649643c5c9a6
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87880
Commit-Queue: Ryan Harrison <rharrison@chromium.org>
Auto-Submit: Ryan Harrison <rharrison@chromium.org>
Reviewed-by: Dan Sinclair <dsinclair@chromium.org>
Commit-Queue: Dan Sinclair <dsinclair@chromium.org>
Reviewed-by: Austin Eng <enga@chromium.org>
Kokoro: Kokoro <noreply+kokoro@google.com>
Currently the entire block of output gets coloured in the CTS output.
This can lead to giant blocks of red and green on the screen which is
hard to read. This PR changes the output to only colour the title and
leave the message the default colour.
The skip colour of blue was changed to cyan as the blue was showing as
red on my terminal which makes it appear as an error instead of a skip.
Change-Id: Idb4fc053bb83c710871f75b997e1fc3e3fdea695
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87679
Auto-Submit: Dan Sinclair <dsinclair@chromium.org>
Kokoro: Kokoro <noreply+kokoro@google.com>
Reviewed-by: Ben Clayton <bclayton@google.com>
Commit-Queue: Ben Clayton <bclayton@google.com>
Previously the error messages about buffer usages would also include
the internal ones that are not set by the base WebGPU API (e.g.
kInternalStorageBuffer is showed when the buffer usage includes Indirect
or QueryResolve), which may confuse the developers.
This patch fixes this issue by implementing Buffer::GetUsageExternalOnly()
for front-end validations which only return the usages with which the
buffer was created using the base WebGPU API.
BUG=dawn:1382
Change-Id: Ie13135efaf2c3dab729d75a80eff486efa525c7e
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87382
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
Kokoro: Kokoro <noreply+kokoro@google.com>
The OpenGL ES 3.1 spec says:
"The point size is taken from the shader built-in gl_PointSize written by the vertex shader, and clamped to the implementation-dependent point size range. If the value written to gl_PointSize is less than or equal to zero, or if no value is written, the point size is undefined."
ANGLE/D3D11 will emit a warning on this and abort processing, causing dawn_end2end tests to fail.
Bug: dawn:1390
Change-Id: I6a56467842ba80d8a070af7240ee07bb111089dd
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87720
Reviewed-by: Ben Clayton <bclayton@google.com>
Kokoro: Kokoro <noreply+kokoro@google.com>
Commit-Queue: Stephen White <senorblanco@chromium.org>
This replaces the manual AST traversal code that was used to determine
the originating resources for textures and samplers.
Change-Id: I463e9dac836ab5d42d9b5559cda5cd35b154e588
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87608
Kokoro: Kokoro <noreply+kokoro@google.com>
Reviewed-by: Ben Clayton <bclayton@google.com>
Before this change, we duplicated line break parsing in both
Source::File and Lexer. This change makes it so that the Lexer no longer
looks for line breaks, instead relying on Source::File for this info.
This de-duplication will also help in implementing the latest spec
changes with respect to line breaks (CRLF vs CR, etc).
Bug: tint:1505
Bug: tint:1513
Change-Id: Ifa820f75ede7e82822525282127e05d2fea047e1
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87604
Reviewed-by: Ben Clayton <bclayton@google.com>
Kokoro: Kokoro <noreply+kokoro@google.com>
Commit-Queue: Antonio Maiorano <amaiorano@google.com>
This will make it easier to debug build issues happening because if this
script in the future.
Bug: chromium:1314527
Change-Id: I5bbb4082ac816f98860e621917bc35b26ba7cb29
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87700
Auto-Submit: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Dan Sinclair <dsinclair@chromium.org>
Commit-Queue: Dan Sinclair <dsinclair@chromium.org>
remove_stale_autogen_files will remove files in
gen/third_party/daw/src/tint/fuzzers, so build
failed flakey with no such file under this directory
if remove_stale_autogen_files run after tint_generator_wsg_corpus
action.
add deps to remove_stale_autogen_files to make sure
tint_generator_wgsl_corpus runs after remove_stale_autogen_files run.
Bug: crbug.com/1314527
Change-Id: Ic072d1c80719cd1c1cf29b1ad4463792018ebb94
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87680
Auto-Submit: Fumitoshi Ukai <ukai@google.com>
Kokoro: Kokoro <noreply+kokoro@google.com>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
intel-0x3e92 was not added, but intel-0x5912 was - leading
to flaky CQ rejection depending on what bot happened to run
the task.
Generalize this expectation since it fails on all platforms
anyway.
Bug: dawn:1387
Change-Id: Iccd4806de456a817edf538041445ee2ac93099e7
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87675
Bot-Commit: rubber-stamper@appspot.gserviceaccount.com <rubber-stamper@appspot.gserviceaccount.com>
Commit-Queue: Austin Eng <enga@chromium.org>
Reviewed-by: Ben Clayton <bclayton@google.com>
Commit-Queue: Ben Clayton <bclayton@google.com>
Kokoro: Kokoro <noreply+kokoro@google.com>
In [Mach engine](https://machengine.org), we compile Dawn's C++ sources using Zig as the C/C++
compiler and Zig's build system (we don't use Dawn's regular build system.) Zig uses clang
with UBSan enabled by default: this caught this instance of undefined behavior, where passing
no dynamic offsets would result in memcpy being called with size 0.
We've encountered at least [one other instance of undefined behavior](https://github.com/hexops/mach/issues/239)
via UBSan in addition to this one, which I will send another CL to fix soon. I'll also verify
we don't see any other instances of UB.
Bug: dawn:1371
Signed-off-by: Stephen Gutekanst <stephen@hexops.com>
Change-Id: Ifc3b938e990b6a0a3b203796ea99ee5abb9a4a09
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87380
Kokoro: Kokoro <noreply+kokoro@google.com>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
So manual builds can be triggered against it.
Change-Id: Ib47bf7bf4a74cef4aebf57e95f3b1c23694a5509
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87669
Reviewed-by: Ben Clayton <bclayton@google.com>
Commit-Queue: Austin Eng <enga@chromium.org>
Update expectations and ts_sources
a06666e000..45d2ccd250
- 45d2cc Fixed TS errors
- 5eacfb Take new createView() dimension default logic into account
- cbdcbd Explicitly destroy devices created by requestDevice_limits
Created with './tools/run cts roll'
Change-Id: I701bc9e6fa6b1996b1ed40b08766cc9dedaf20d8
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87621
Reviewed-by: Brandon Jones <bajones@chromium.org>
Commit-Queue: Ben Clayton <bclayton@google.com>
Find git using shutil.which() so extensions are resolved according to PATHEXT.
Remove the "print(e)" that is breaking the expected output.
Bug: dawn:1383
Change-Id: If299b744add0797036598129e08ba7d8c64002e1
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87481
Reviewed-by: Austin Eng <enga@chromium.org>
Reviewed-by: Loko Kung <lokokung@google.com>
Kokoro: Kokoro <noreply+kokoro@google.com>
Commit-Queue: Loko Kung <lokokung@google.com>
The change in https://dawn-review.googlesource.com/c/dawn/+/84240
modified the code generated by this transform, but didn't update the
Tint unit tests (which are not yet being run on Dawn's CQ).
Change-Id: I32d097d052f01628c3f8f5520c900b83422707e3
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87605
Auto-Submit: James Price <jrprice@google.com>
Reviewed-by: Dan Sinclair <dsinclair@chromium.org>
Commit-Queue: Dan Sinclair <dsinclair@chromium.org>
Kokoro: Kokoro <noreply+kokoro@google.com>
This CL adds names to the TODOs which did not have them and enables
the readability/todo lint. The names are based on the git blame for
the TODO lines.
Bug: dawn:1339
Change-Id: I25a2920bc8fa9606f5dda67a629fdef1c10f8948
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87600
Reviewed-by: Austin Eng <enga@chromium.org>
Commit-Queue: Dan Sinclair <dsinclair@chromium.org>
This CL fixes up various build/namespaces lint errors and enables
the lint check.
Bug: dawn:1339
Change-Id: Ib2edd0019cb010e2c6226abce6cfee50a0b4b763
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87482
Kokoro: Kokoro <noreply+kokoro@google.com>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Dan Sinclair <dsinclair@chromium.org>
Changes Dawn and Tint to use a 3x3 matrix for external texture
YUV-to-RGB conversions. This will allow us to use standard matrices
as they exist in SkYuvMath.
Bugs: dawn::1082
Change-Id: I8e0c7c3dc1c085d8f336da956aea9496913b70fa
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/86847
Kokoro: Kokoro <noreply+kokoro@google.com>
Reviewed-by: Ben Clayton <bclayton@google.com>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Brandon1 Jones <brandon1.jones@intel.com>
• Remove a number of expectations that are no longer needed.
• Change a number of expectation tags to be more specific.
• Sort the expectations per chunk.
• Add a few more wide-wildcard 'Failure' rules for tests that commonly flake.
Bug: dawn:1342
Change-Id: I0e23cd546f7ab54a5720e24c52e3782b5df6b99f
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87520
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Ben Clayton <bclayton@google.com>
This CL moves the Validate methods from the Resolver into a specific
Validator class used by the Resolver.
Bug: tint:1313
Change-Id: Ida21a0cc65f2679739c8499de7065ff8b58c4efc
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87150
Reviewed-by: Ben Clayton <bclayton@google.com>
Kokoro: Kokoro <noreply+kokoro@google.com>
Commit-Queue: Dan Sinclair <dsinclair@chromium.org>
- To be used for pipeline cache testing.
- Plumbs overriding the platform to the adapters for testing.
- Restructures build a little bit so that the test infrastructure can have full access to dawn native internals. Also differentiates end2end and white_box a bit more to make it clear that end2end should not have access to dawn native internals.
Bug: dawn:549, dawn:1374
Change-Id: Ibcc6c44a116c7967ee2317c74409f613e896eb0a
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/86841
Reviewed-by: Austin Eng <enga@chromium.org>
Commit-Queue: Loko Kung <lokokung@google.com>
Adds support for non-zero first/baseVertex on Draw[Indexed]Indirect by
duplicating the first/baseVertex indirect parameter onto a root
constant in the indirect buffer.
Change-Id: I280149065179806d3e57b07f1a396f9e2e4e8fcb
Bug: dawn:548
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/84240
Reviewed-by: Austin Eng <enga@chromium.org>
Commit-Queue: Enrico Galli <enrico.galli@intel.com>
Auto-Submit: Enrico Galli <enrico.galli@intel.com>
- Note: goal is to merge the two into the same class, but to avoid breaking/fixing the current D3D12 shader caching, introducing a new one, and will merge the old one later on.
- Adds instance of BlobCache to the Instance, and passthrough for the Device to get to it. (We want the cache to be at the Instance so that eventually different devices can still use the cache (assuming same isolation key)).
Bug: dawn:549
Change-Id: Ib7c82a439f32b306f0cccd3db424fb0e427a90a1
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/86400
Reviewed-by: Austin Eng <enga@chromium.org>
Kokoro: Kokoro <noreply+kokoro@google.com>
Commit-Queue: Loko Kung <lokokung@google.com>
GLFW window creation can fail. If so, we should not attempt to
make the context current and create adapters on it.
Bug: dawn:1375
Change-Id: Ie1a94a42d1f56514b41a715add7a2b4eebb763f0
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87460
Reviewed-by: Loko Kung <lokokung@google.com>
Commit-Queue: Austin Eng <enga@chromium.org>
Add result.List.StatusTree() for building a query.Tree[Status].
Add helpers for serializing results.
Add helpers for merging and de-duplicating results.
Change the interface of result.List.ReplaceDuplicates() so that the
merging function takes a status set instead of a list of results.
Bug: dawn:1342
Change-Id: I77580ec5fd4c8f12109fb6e9e83afea8b740260c
Reviewed-on: https://dawn-review.googlesource.com/c/dawn/+/87240
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Kokoro: Kokoro <noreply+kokoro@google.com>
Loko Kung
Ben Clayton
Enrico Galli
Brandon Jones
dan sinclair
Antonio Maiorano
Ryan Harrison
Dawn Autoroller
Jiawei Shao
Stephen White
James Price
Corentin Wallez
Fumitoshi Ukai
Austin Eng
Stephen Gutekanst
Aleksi Sapon
Yunchao He