This is a step towards supporting "Universal" Windows apps, when building for
Windows Phone. SDL can now build against the Windows Phone 8.1 SDK, and apps
linked to it can run, however further work and testing is required as some
previously Phone-only code appears to no longer be applicable for
Windows Phone 8.1. The Windows 8.1 code paths does seem to be preferable, but
should probably be tested and updated on a finer-grained basis.
If in doubt, use the Windows Phone 8.0 projects for now, as located in
VisualC-WinRT/WinPhone80_VS2012/
TODO:
- look at any Windows Phone specific code paths in SDL, and see if Phone 8.1
should use the Windows Phone code path(s), or the Windows 8.x or 8.1 paths
The Win32 APIs, VerifyVersionInfoW and VerSetConditionMask, are not currently
available for use in WinRT apps. This change primarily #if[n]defs-out some
calls to them.
This commit also includes some base-level support for Universal apps.
TODO:
- add support for Windows Phone 8.1
- add support for satellite libs: SDL_image, SDL_ttf, and SDL_mixer
Setting the tag type will let libtool work even when it cannot infer
the type of the code being built. One way libtool may fail to infer
the tag type is if one uses a mock compiler (such as for static
analysis).
This allows the joystick hotplug to function without the main event loop
(specifically: without SDL_INIT_VIDEO), and moves explicit polling for
joysticks where it belongs at the low-level: in SDL_SYS_JoystickDetect().
This lets apps call SDL_JoystickUpdate() to get hotplug events and keep
SDL_NumJoysticks() correct, as expected. As SDL_PumpEvents() (and
SDL_PollEvents, etc) calls SDL_JoystickUpdate(), existing apps will function
as before.
Thanks to "raskie" on the forums for pointing this out!
This fixes a bug where we'd offset positions by the height of the dock, if it
was along the bottom of the screen.
Fixes https://bugzilla.libsdl.org/show_bug.cgi?id=2509
Thanks to Alex Szpakowski for bug & patch.
It used to be that SDL_SetWindowPosition was relative to the top of the screen,
which didn't make sense. In addition, borderless windows can be positioned
*below* the menubar, so SDL_SetWindowPosition(win, 0, 0) on a borderless window
would hide ~30ish pixels of the window below the menubar.
This fixes an issue where an empty cliprect is treated the same as a NULL
cliprect, causing the render backends to disable clipping.
Also adds a new API, SDL_RenderIsClipEnabled(render) that allows you to
differentiate between:
- SDL_RenderSetClipRect(render, NULL)
- SDL_Rect r = {0,0,0,0}; SDL_RenderSetClipRect(render, &r);
Fixes https://bugzilla.libsdl.org/show_bug.cgi?id=2504
All WinRT projects have been merged into a single directory, "VisualC-WinRT",
with platform-specific variants in subdirectories off of it. This structure
has been applied to a few major SDL satellite libraries as well (SDL_image,
SDL_mixer, and SDL_ttf).
Currently, only Windows 8.0/RT and Windows Phone 8.0 targets are supported.
Windows 8.1/RT/Phone targets are planned.
Projects that use SDL_image/WinRT, and link to it via Visual Studio's
project-to-project reference system, will need to be updated, to reflect the
changes in the project structure. This can be done by:
1. removing the MSVC project(s) for SDL/WinRT
2. re-added the MSVC project(s) for SDL/WinRT
3. right-clicking on the app, or projects that use those libraries, choosing
References, removing the references to any of these projects (they'll likely
be highlighted with an exclamation mark), then re-adding them
To note, the satellite libraries that reference SDL/WinRT have been updated
already. The changes for those libraries will be pushed to hg.libsdl.org
shortly.
TODO:
- add support for Windows 8.1 and Windows Phone 8.1 targets, using
Microsoft's new "Universal" app support, if possible. These will be added to
a new subdirectory, or subdirectories (if more than one sets of projects are
needed, hopefully not), of "VisualC-WinRT".
- investigate NuGet support, which could allow Visual C++ to download
new copies of SDL/WinRT, its satellite libraries, and their dependencies,
from remote servers.
It's picking up the system headers instead of the RPi build files.
Theoretically, we _can_ support Wayland on this platform, though, as there
_is_ a Raspberry Pi port out there...
Thomas Schatz
The dynamic library (extracted from SDL2-2.0.3.dmg and put in /Library/Frameworks/) references the __Block_copy symbol in /usr/lib/libSystem.B.dylib, which cannot be found:
dlopen(/Library/Frameworks/SDL2.framework/SDL2, 6): Symbol not found: __Block_copy
Referenced from: /Library/Frameworks/SDL2.framework/SDL2
Expected in: /usr/lib/libSystem.B.dylib
From what I could gather __Block_copy seems to be related to the blocks extension to the C programming language introduced by Apple since OSX-10.6 (see: http://thirdcog.eu/pwcblocks/). If this is indeed the case, I don't think the SDL2-2.0.3.dmg on the website is at all compatible with OSX-10.5 countrary to what is announced.
cplu
When I double click on a window, the "clicks" field (newly added since 2.0.2) in SDL_MouseButtonEvent is 1 instead of 2.
However, when I "tripple" click, "clicks" field is then 2.
I'v look into the source code in SDL_windowsevents.c and found that when a double click event comes, WIN_WindowProc will get a WM_LBUTTONDBLCLK msg. The message sequence of a double click is:WM_LBUTTONDOWN->WM_LBUTTONUP->WM_LBUTTONDBLCLK->WM_LBUTTONUP.
Bryan Cain
Using any SDL application with the Wayland backend under Weston, if the application sets a cursor with SDL_SetCursor, the cursor will work until the mouse pointer leaves the window. When the pointer re-enters the window, there will be no cursor displayed at all.
I did some digging, and the reason for this is that SDL attaches the buffer to the cursor surface only once (during cursor creation) and assumes that it will stay attached. This is not how Wayland works, though - once the compositor is done rendering the buffer, it will release it, so it is no longer attached to the surface. When the cursor re-enters the window a second time, SDL sets the cursor to the same surface with no buffer attached, so no cursor is displayed.
This is fixed by the attached patch, which makes SDL attach the buffer to the surface when the cursor is set, not when it is created.
Bryan Cain
Wayland_CreateSystemCursor tries to load a cursor named "wait" for two of the system cursor categories. This causes a segmentation fault when one of these cursors is used, because "wait" is not an actual cursor name in X11/Wayland cursor themes.
I can't attach my patch since I'm on a mobile right now, but I can confirm that simply replacing "wait" with "watch" for both of its uses in Wayland_CreateSystemCursor (in SDL_waylandmouse.c) fixes the bug.
Ashley Whetter
RHEL6 and CentOS6 systems still use an old version of udev (147). It wasn't until udev 148 (Yep. 1 version off!) that the input class system changed from "ID_CLASS" to "ID_INPUT_{JOYSTICK,KEYBOARD,MOUSE,etc}" (http://lwn.net/Articles/364728/). Because SDL2 looks for the ID_INPUT_X field this means that it never detects any input devices on RHEL6 systems.
I've attached a patch which fixes the problem. If no input devices are detected with "ID_INPUT_X" then SDL will fallback to looking for the old style "ID_CLASS" udev field instead.
Because of the "big change" between udev versions I doubt it'll ever get upgraded on RHEL6, but because RHEL7 is on the way I don't know if this patch is worth merging. Hopefully it'll help anyone out that's having this problem though.
Sylvain
Someone provided a patch for this, recently on the mailing list :
-----
Hi,
it is possible to skip the bug in libX11 by using the defaults for
XNResourceName and XNResourceClass in `XCreateIC' (the table for the
"Input Context Values" [1] in libX11-doc shows that a default is
provided if it is not set).
diff -ur SDL2-2.0.3~/src/video/x11/SDL_x11window.c SDL2-2.0.3/src/video/x11/SDL_x11window.c
--- SDL2-2.0.3~/src/video/x11/SDL_x11window.c 2014-04-04 17:09:40.764307181 +0200
+++ SDL2-2.0.3/src/video/x11/SDL_x11window.c 2014-04-04 17:10:23.887765046 +0200
@@ -239,8 +239,7 @@
data->ic =
X11_XCreateIC(videodata->im, XNClientWindow, w, XNFocusWindow, w,
XNInputStyle, XIMPreeditNothing | XIMStatusNothing,
- XNResourceName, videodata->classname, XNResourceClass,
- videodata->classname, NULL);
+ NULL);
}
#endif
data->created = created;
Tito Latini
[1] http://www.x.org/releases/X11R7.7-RC1/doc/libX11/libX11/libX11.html#Input_Context_Values
Lasse ??rni
While enabling $1 gesture support in the Urho3D engine which uses SDL2 I detected some errors in the gesture code in SDL_gesture.c:
- In the function SDL_SaveAllDollarTemplates() the following line should use index variable j instead of i:
rtrn += SaveTemplate(&touch->dollarTemplate[i], dst);
- In the function SDL_SaveDollarTemplate() the following code should use index variable j instead of i:
if (touch->dollarTemplate[i].hash == gestureId) {
return SaveTemplate(&touch->dollarTemplate[i], dst);
- In the function SDL_SendGestureDollar() the x & y coordinates are being written to the mgesture structure, which results in garbage due to dgesture and mgesture being different data structures inside the union. The coordinates should be written to dgesture.x & dgesture.y respectively
Changes included:
- adding support for a few, additional, VirtualKey constants
- removing accesses to 'windows_scancode_table', as the table's contents
don't line up with WinRT virtual keys. Using Windows older VK_* constants
may, however, be a good alternative in a future update.
Brandon Schaefer
Ryan C. Gordon
David Ludwig
Steven Stewart-Gallus
Sam Lantinga
J?rgen P. Tjern?
Philipp Wiesemann
J?rgen P. Tjern?
Dimitris Zenios
Thomas Perl