Further refactor the device enumeration code to retrieve the default sink/source node IDs from the metadata node. Use the retrieved IDs to sort the device list so that the default devices are at the beginning and thus are the first reported to SDL.
The latency of source nodes can change depending on the overall latency of the processing graph. Incoming audio must therefore always be buffered to ensure uninterrupted delivery.
The SDL_AudioStream path was removed in the input callback as the only thing it was used for was buffering audio outside of Pipewire's min/max period sizes, and that case is now handled by the omnipresent buffer.
Extend device enumeration to retrieve the channel count and default sample rate for sink and source nodes. This required a fairly significant rework of the enumeration procedure as multiple callbacks are involved now. Sink/source nodes are tracked in a separate list during the enumeration process so they can be cleaned up if a device is removed before completion. These changes also simplify any future efforts that may be needed to retrieve additional configuration information from the nodes.
In some cases, it can be useful to have the KMSDRM backend even if it cannot
be used for rendering. An app may want to use SDL for input processing while
using another rendering API (such as an MMAL overlay on Raspberry Pi) or
using its own code to render to DRM overlays that SDL doesn't support.
This also moves the check for DRM master to an earlier point where we can fail
initialization of the backend, rather than allowing the backend to initialize
then failing the creation of a window later.
Unlike Mutter and Sway, KWin actually checks the serial passed in
wl_pointer_set_cursor(). The serial provided is supposed to be the
serial of the pointer enter event, but We were always passing 0.
This caused KWin to drop our requests to hide the cursor.
Thanks to the KDE folks for spotting this in my debug logs.
Fixes#3576
In the extremely unlikely event that inotify is not available (and,
therefore, HAVE_INOTIFY is not #defined), SDL will no-longer build.
This is because <unistd.h> is only included when HAVE_INOTIFY is
defined, and PR #4098 adds a call to access(…, F_OK), which requires
<unistd.h>.
(Note that the F_OK symbol is the only one which actually prevented
SDL from compiling, but both access() and close() fell back to implicit
definitions, which is a bit concerning.)
Fixes: 8d43f45a7b ("Don't use udev for joystick enumeration if running in a container")
If we are running in a container, like Flatpak[1] or pressure-vessel[2],
it's likely that we are using user namespaces,
therefore udev event notification via netlink won't work reliably.
Use their filesystem API to detect them and automatically fallback to
the inotify-based enumeration.
[1] <https://flatpak.org/>
[2]
<https://gitlab.steamos.cloud/steamrt/steam-runtime-tools/-/tree/master/pressure-vessel>
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
This improves SDL's ability to detect HIDAPI joystick hotplug in a
container environment because we cannot reliably receive events from
udev in a container.
For a more detailed explanation of why this issue happens with
containers, please check the previous commit
"joystick: Use inotify to detect joystick unplug if not using udev"
(b0eba1c5).
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
As already explained in the previous commit "joystick: Allow libudev to
be disabled at runtime" (13e7d1a9), libudev can fail in a container.
To make it easier to experiment with, we add a new environment variable
"SDL_HIDAPI_JOYSTICK_DISABLE_UDEV" that disables udev and let it
fallback to the device enumeration using polling.
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
This fixes problems with controllers not being re-detected when a computer goes to sleep and a controller is removed and plugged back in while it's asleep.
Fixes SDL_CreateWindowAndRenderer (and similar situations) not choosing a Metal backend. See #3991.
Passing an explicit backend into CreateWindow, eg SDL_WINDOW_OPENGL or SDL_WINDOW_METAL, will still prevent the window from being used with other backend types.
SDL_isxdigit() should only accept A-Fa-f, not A-Za-z (it shouldn't use
SDL_isalpha()).
SDL_ispunct() shouldn't accept spaces (it should use SDL_isgraph()
instead).
SDL has been missing a bunch of these 'isX' functions for some time,
where X is some characteristic of a given character.
This commit adds the rest of them to the SDL stdlib, so now we have:
- SDL_isalpha()
- SDL_isalnum()
- SDL_isblank()
- SDL_iscntrl()
- SDL_isxdigit()
- SDL_ispunct()
- SDL_isprint()
- SDL_isgraph()
This uses the mechanism added in emscripten-core/emscripten#10843
which was applied to SDL1 and OpenAL. This adds the same for SDL2.
This also reverts commit 865eaddffed50dbd13e6564c3f73902472cf74e8
which did something similar, but the new mechanism is more effective.
The DJGPP compiler emits many warnings for conflicts between print
format specifiers and argument types. To fix the warnings, I added
`SDL_PRIx32` macros for use with `Sint32` and `Uint32` types. The macros
alias those found in <inttypes.h> or fallback to a reasonable default.
As an alternative, print arguments could be cast to plain old integers.
I opted slightly for the current solution as it felt more technically correct,
despite making the format strings more verbose.
wahil1976
This patch fixes the warnings seen when compiling the Wayland backend. This will also be required in the future to avoid issues with compilation.
When SleepConditionVariableSRW() releases the SRW lock internally, it causes
our SDL_mutex_srw state to become inconsistent. The lock is unowned yet inside,
the owner is still the sleeping thread and more importantly the owner count is
still 1.
The next time someone acquires the lock, they will bump the owner count from 1
to 2. At that point, the lock is hosed. From the internal lock state, it looks
to us like that owner has acquired the lock recursively, even though they have
not. When they call SDL_UnlockMutex(), it will see the owner count > 0 and not
call ReleaseSRWLockExclusive().
Now when someone calls SDL_CondSignal(), SleepConditionVariableSRW() will start
the wakeup process by attempting to re-acquire the SRW lock. This will deadlock
because the lock was never released after the other thread had used it. The
thread waiting on the condition variable will never be able to wake up, even if
the SDL_CondWaitTimeout() function is used and the timeout expires.
There were two different implementations of IsBluetoothXboxOneController(), one
in SDL_hidapi_xbox360.c and one in SDL_hidapi_xboxone.c. The latter had been
updated to include USB_PRODUCT_XBOX_ONE_SERIES_X_BLUETOOTH while the former had
not.
This mismatch led to the Xbox Series X failing on macOS only. We have special
code for handling the 360Controller driver for macOS which requires us to use
the Xbox 360 driver for wired Xbox One controllers, and the SDL_hidapi_xbox360
version of IsBluetoothXboxOneController() was used to determine which devices
were wired.
In addition to adding the missing USB_PRODUCT_XBOX_ONE_SERIES_X_BLUETOOTH, this
change moves IsBluetoothXboxOneController() into a single shared function which
will ensure this bug won't happen again.
This is caused by the Metal renderer recreating the window because by default we create an OpenGL window on macOS.
It turns out that at least on macOS 10.15, a window that has been initialized for OpenGL can also be used with Metal. So we'll skip recreating the window in that case.
Hiroyuki Iwatsuki
If you pass the C string directly to NSLog(), it will be garbled with Japanese and probably other language strings, or no log will be output at all.
NSLog("Hello, World!"); // => "Hello, World!"
NSLog("こんにちは、世界!"); // => No output...
Therefore, you need to convert the string to an NSString before passing it to NSLog().
NSString *str = [NSString stringWithUTF8String:"こんにちは、世界!"];
NSLog(@"%@", str); // => "こんにちは、世界!"
Thank you.
By default, we will minimize the window when we receive Alt+Tab with a
full-screen keyboard grabbed window to allow the user to escape the
full-screen application.
Some applications like remote desktop clients may want to handle Alt+Tab
themselves, so provide an opt-out via SDL_HINT_ALLOW_ALT_TAB_WHILE_GRABBED=0.
For keys that are already down when we install the keyboard hook, we need to
allow the WM_KEYUP/WM_SYSKEYUP message to be processed normally. This ensures
that other applications see the key up, which prevents the key from being stuck
down from the perspective of other apps when our grab is released.
GNOME Mutter requires keyboard grab for certain important functionality like
window resizing, interaction with the application context menu, and opening the
Activites view. To allow Mutter to grab the keyboard as needed, we'll ungrab
when the mouse leaves our window.
To be safe, we'll do this for all WMs since forks of Mutter and Matacity (and
possibly others) may have the same behavior, and we don't want to have to keep
track of those.
Sylvain
I propose this new version for SDL_stretch.c that drops mprotect and asm
Code is similar to the StretchLinear, but the steps computation are kept similar to the nearest.
so that:
- it's pixel perfect with nearest
- as fast as asm I think
- no asm, nor mprotect
- benefit for all archicture
Ozkan Sezer
- adds MSVC __declspec(align(x)) support,
- disables asm if PAGE_ALIGNED no macro is defined,
- still disables asm for gcc < 4.6, need more info,
- drops Watcom support.
This adds SDL_SetWindowKeyboardGrab(), SDL_GetWindowKeyboardGrab(),
SDL_SetWindowMouseGrab(), SDL_GetWindowMouseGrab(), and new
SDL_WINDOW_KEYBOARD_GRABBED flag. It also updates the test harness to exercise
this functionality and makes a minor fix to X11 that I missed in
https://hg.libsdl.org/SDL/rev/02a2d609369b
To fit in with this new support, SDL_WINDOW_INPUT_CAPTURE has been renamed to
SDL_WINDOW_MOUSE_CAPTURE with the old name remaining as an alias for backwards
compatibility with older code.
The grabbed_window field is superfluous now since SDL added the
SDL_GetGrabbedWindow() function, so it can be removed.
DirectFB_SetWindowMouseGrab() is also simplified because SDL handles ungrabbing
any previously grabbed window prior to calling SetWindowMouseGrab() now.
Compile-tested only.
UMU
#define SDL_COMPOSE_ERROR(str) SDL_STRINGIFY_ARG(__FUNCTION__) ", " str
I think SDL_STRINGIFY_ARG should be removed.
#define SDL_COMPOSE_ERROR(str) __FUNCTION__ ", " str
(verified with Visual Studio 2019)
jibb
New hint to let the user opt out of having Switch controllers' Home button lit when opened.
This is more consistent with the Switch itself (which doesn't light the button normally) and may be preferred by users who may disconnect their controller without letting the application close it.
I think this warrants a Switch-specific hint because the default behaviour is unusual (inconsistent with using a Switch controller on a Switch itself or with some other programs on PC), and because of that it's distinct from other lights (the player number on Switch controllers and the player colour on PlayStation controllers).
SDL_SetKeyboardFocus(NULL) will lift any keys still pressed when keyboard focus
leaves the window, but then key repeat comes behind our backs and presses the
key down again. This results in an infinite stream of SDL_KEYDOWN events when
focus leaves the window with a key down (particularly noticeable with Alt+Tab).
This gives us flexibility to add others hints to control keyboard grab behavior
without having to touch all of the backends. It also allows us to possibly
expose keyboard grab separately from mouse grab for applications that want to
manage those independently.
These are explicitly written in C code rather than generated at build
time, so they weren't affected by changing how we invoke
wayland-scanner.
Signed-off-by: Simon McVittie <smcv@collabora.com>
We support both the org.freedesktop.ScreenSaver D-Bus API (same as the X11
backend) and the Wayland idle_inhibit_unstable_v1 protocol.
Some Wayland compositors only support one or the other, so we need both to
for broad compatibility.
Wayland compositors seem to have standardized on 10 units per "wheel tick" for
continuous scroll events, so we need to convert these axis values to ticks by
dividing by 10 before reporting them in SDL_MOUSEWHEEL events.
This is implemented via a low-level keyboard hook. Unfortunately, this is
rather invasive, but it's how Microsoft recommends that it be done [0].
We want to do as little as possible in the hook, so we only intercept a few
crucial modifier keys there, while leaving other keys to the normal event
processing flow.
We will only install this hook if SDL_HINT_GRAB_KEYBOARD=1, which is not
the default. This will reduce any compatibility concerns to just the SDL
applications that explicitly ask for this behavior.
We also remove the hook when the grab is terminated to ensure that we're
not unnecessarily staying involved in key event processing when it's not
required anymore.
[0]: https://docs.microsoft.com/en-us/windows/win32/dxtecharts/disabling-shortcut-keys-in-games
Hiding the cursor doesn't appear to work reliably on GNOME when another window
steals mouse focus right as we call SDL_ShowCursor(SDL_DISABLE). This can happen
when the keyboard shortcut inhibition permission prompt appears in response to a
call to SDL_SetRelativeMouseMode() with SDL_HINT_GRAB_KEYBOARD=1. The result is
that the default cursor is stuck locked in position and visible on screen
indefinitely.
By redrawing the cursor on pointer focus enter, the cursor now disappears upon
the first mouse motion event. It's not perfect but it's way better than the
current behavior.
Use zwp_keyboard_shortcuts_inhibit_manager_v1 to allow SDL applications
to capture system keyboard shortcuts like Alt+Tab when keyboard grab is
enabled via SDL_HINT_GRAB_KEYBOARD.
Existing SDL applications may not know about the need to set a specific
hint to enable rumble on PS5 controllers, even though they may already
set the equivalent SDL_HINT_JOYSTICK_HIDAPI_PS4_RUMBLE hint for PS4
controller rumble support.
Rather than requiring those developers update their apps, let's use the
SDL_HINT_JOYSTICK_HIDAPI_PS4_RUMBLE value as an indication of the behavior
they are expected for all PlayStation controllers.
From hidapi mainstream git: https://github.com/libusb/hidapi/issues/142d2c3a9862e
Read callback may fire itself on its own even after its been requested
to stop and exactly before the calling code waits for its completion in
indefinite loop. Explicitly preventing re-fireing the submission loop
fixes the issue.
jibb
I'm testing with DualShock 4, DualSense, Switch Pro Controller, and PowerA Switch Controller.
I'm using the standard mapping file from here:
https://raw.github.com/gabomdq/SDL_GameControllerDB/master/gamecontrollerdb.txt
With SDL_HINT_GAMECONTROLLER_USE_BUTTON_LABELS turned off (set to "0") I expect the button positions to be the same on all devices, based on Xbox controller button naming (eg SDL_GameControllerGetButton(g, SDL_CONTROLLER_BUTTON_Y) gives me whether the North face button is pressed).
However, the Switch Pro Controller layout is wrong (matching labels rather than positions, so X and Y are swapped and A and B are swapped). And with the PowerA controller the East and West buttons are correct, but the North and South buttons are swapped instead.
Mathias Kaerlev
Also seeing this on 2.0.14. This is most likely a regression, since we weren't seeing this on an earlier SDL version.
I suspect it might be caused by this commit:
a569b21188 (diff-da9344d94c66b8c702a45e7649f412039f08bba83bd82de33f5c80ea9c8c39d5)
It seems like both the HIDAPI driver and SDL_gamecontroller.c will try to swap the buttons if the hint is set to 0, causing the button remap to cancel out.
RustyM
This is related to Bug 5034, but crashes under a somewhat different condition.
In the latest tip (changeset 13914) or with the SDL 2.0.12 source + David?s 5034 patch, unplugging and then replugging in certain controller types on macOS will crash. A mix of new controllers like Switch Pro, PS4 and Xbox One all work without issue. But if a controller without a rumble function, like many SNES retro USB gamepads, is mixed with a PS4 or Switch Pro controller it will crash.
File: joystick/darwin/SDL_sysjoystick.c
Function: static recDevice *FreeDevice(recDevice *removeDevice)
On line 159: while (device->pNext != removeDevice) {
Causes: Thread 1: EXC_BAD_ACCESS (code=1, address=0x188)
This can be reproduced in testgamecontroller" by starting the test program with both a ?retro? controller plugged in and a ?modern rumble? controller (Switch Pro/PS4). This may crash on launch, but it depends on which controller ends up as device 0. If it doesn?t crash, unplug the ?modern rumble? controller and plug it back in.
Some of the "retro" controllers I?ve seen this crash with:
- iBuffalo SNES Controller
- 8Bitdo SN30 Gamepad (in MacOS mode)
- Retrolink NES Controller
- HuiJia SNES Controller Adaptor
The issue appears macOS specific. Seen on 10.12.6 and 10.14.6. Not seen on Windows 10.
The while loop in FreeDevice() assumes that every device is not NULL.
recDevice *device = gpDeviceList;
while (device->pNext != removeDevice) {
device = device->pNext;
}
device->pNext = pDeviceNext;
So maybe we should check for NULL here? Or instead prevent adding NULL devices to the list in the first place? Checking device for NULL before entering the loop appears to work.
recDevice *device = gpDeviceList;
if (!device) {
while (device->pNext != removeDevice) {
device = device->pNext;
}
}
device->pNext = pDeviceNext;
sashikknox
In some cases, need create EGLWindow with SDLWindow. In X11 i can get pointer to NativeWindow from **struct SDL_SysWMinfo wmInfo**
```C++
struct SDL_SysWMinfo wmInfo;
SDL_GetWindowWMInfo(ptSDLWindow, &wmInfo)
#if defined(__unix__) && defined(SDL_VIDEO_DRIVER_X11)
nativeWindow=(EGLNativeWindowType)wmInfo.info.x11.window;
nativeDisplay=(EGLNativeDisplayType)wmInfo.info.x11.display;
#endif
```
than i can create EGLSurface
```
eglCreateWindowSurface(nativeDisplay, EGL_CONFIG, nativeWindow, SURFACE_ATTRIBUTES);
```
in Wayland i can do it with same way, just need pointer to **EGLWindow**, we already have pointer to **wl_display** from **SDL_sysWMInfo**, need add to **wl** struct in SDL_SysWMInfo another pointer to **struct wl_egl_window *egl_window;**. And in wayland backend, in function **Wayland_GetWindowWMInfo** return pointer to **egl_window** from **SDL_WindowData**
Now i use patched statically built SDL2 in port of Quake 2 GLES2 for SailfishOS (it use QtWayland):
link to SDL2 commit and changed string for patch:
- 6858a618cd
- b1e29e87b9/SDL2/src/video/wayland/SDL_waylandwindow.c (L463)
link to use in Quake2 port:
1. here i get pointer to EGLNativeWindowType: 6d94fedb1b/Engine/Sources/Compatibility/OpenGLES/EGLWrapper.c (L319)
2. then use it for create EGLSurface: 6d94fedb1b/Engine/Sources/Compatibility/OpenGLES/EGLWrapper.c (L391)
wahil1976
This patch adds a written-from-scratch WSCONS driver for OpenBSD. It does not have hardcoded keymaps, and it features mouse support when wsmux is available.
For this to work, it needs access to the /dev/wskbd* devices which are not available to non-root users by default. Access to those can be granted by changing /etc/fbtab to give the logging user the ownership of those devices.
Note that axes are changed to match the axes we're using with PlayStation controllers, since users will appreciate consistent behaviour across devices.
Nia Alarie
The NetBSD kernel's audio resampling code is much simpler and lower quality than libsamplerate.
Presumably, if SDL always performs I/O on the audio device in its native frequency, we can avoid resampling audio in the kernel and let SDL do it with libsamplerate instead.
Dominik Reichardt
Exult (http://exult.info) has an editor app that uses GTK+2. Up to now we were using X's drag'n'drop to allow dropping of assets from the editor onto Exult.
There is now an experimental branch that makes use of SDL_DROPFILE. That works under X, dropping in Exult's SDL2 window puts the asset right at the spot you dropped at.
On macOS with native Exult and Quartz GTK+2 this doesn't work, the location of the drop is where the mouse was last tracked before you left the window (usually one of the edges, unless you tabbed out).
All we tried out pointed to the fact that the location update needs to be done by the dropfile event in SDL2, not by our own (which always only worked after the Exult window getting focus).
This patch adds this to SDL_cocoawindow.m and it works perfectly, passing the correct coordinates to our code (SDL_GetMouseState()).
- explicitly use UNICODE versions of DrawText, EnumDisplaySettings,
EnumDisplayDevices, and CreateDC: the underlying structures have
WCHAR strings.
- change WIN_UpdateDisplayMode and WIN_GetDisplayMode() to accept
LPCWSTR instead of LPCTSTR for the same reason.
- change WIN_StringToUTF8 and WIN_UTF8ToString to the explicit 'W'
versions where appropriate.
i.e. where the string is known guaranteed to be WCHAR*, in:
- SDL_dinputjoystick.c (WIN_IsXInputDevice): VARIANT->var is BSTR (WCHAR*)
- SDL_rawinputjoystick.c (RAWINPUT_AddDevice): string is WCHAR*
- SDL_windows_gaming_input.c (IEventHandler_CRawGameControllerVtbl_InvokeAdded):
string is WCHAR*
There should be more of these..
_InterlockedExchange_rel() is required for correctness on ARM because
the _ReadWriteBarrier() macro is only a compiler memory barrier, not a
hardware memory barrier. Due to ARM's relaxed memory model, this means
the '*lock = 0' write may be observed before the operations inside the
lock, causing possible corruption of data protected by the lock.
_InterlockedExchange_acq() is more efficient on ARM because it avoids an
expensive full memory barrier that _InterlockedExchange() does.
C.W. Betts
I tested building commit http://hg.libsdl.org/SDL/rev/7adf3fdc19f3 on Mac Catalyst and found some issues:
* MTLFeatureSet_iOS_* enums aren't available under Mac Catalyst.
* OpenGL ES is unavailable under Mac Catalyst.
* Some Metal features are available under Catalyst but not iOS, such as displaySyncEnabled.
* Set Metal as the default renderer on Mac Catalyst
Attaching a patch that will make SDL2 build for Mac Catalyst.
This is unsafe because the event is auto-reset, therefore the call to
WaitForSingleObject() resets the event which GetOverlappedResult() will
try to wait on.
Even though the overlapped operation is guaranteed to be completed at
the point we call GetOverlappedResult(), it will still wait on the event
handle for a short time to trigger the reset for auto-reset events. This
amounts to roughly a 100 ms sleep each time GetOverlappedResult() is called
for a completed I/O with a non-signalled event.
In the context of HIDAPI, this extra sleep means that callers that loop
on hid_read_timeout() with timeout=0 will loop forever, since the 100 ms
sleep each iteration ensures ReadFile() will always have new data.
Caleb Cornett
For a window created with SDL_WINDOW_ALLOW_HIGHDPI, SDL_GL_GetDrawableSize will return the high-dpi drawable size even before any GL context creation happens. But SDL_Metal_GetDrawableSize will return the size of the window if the Metal view has not been created. This is confusing and inconsistent behavior.
An easy way to test this is to build testgl2 and testvulkan on macOS with the SDL_WINDOW_ALLOW_HIGHDPI flag enabled during window creation. The GL2 program will report a drawable size of 2x window width and 2x window height, while the Vulkan program will report the window size.
This patch addresses the issue by falling back to using the content view dimensions if no Metal view exists in the window. (The code for this was taken directly from Cocoa_GL_GetDrawableSize.) With this change, the testvulkan behavior matches that of testgl2.
Note that I haven't tested for this issue on UIKit. It's possible a similar change will need to be made there too.
David Carlier
This form of 'or' provides a hint that performance
will probably be improved if shared resources dedicated
to the executing processor are released for use by other
processors
- hidapi already called CancelIo on hid_close but that only cancels pending IO for the current thread. Controller read/writes originate from multiple
threads (serialized, but on a different thread nonetheless) but device destruction was always done on the main device thread which left any
pending overlapped reads still running after hidapi's internal read buffer is deallocated leading to intermittent free list corruption.
Ivan Kuzmenko
MCST Elbrus 2000 (E2K, https://en.wikipedia.org/wiki/Elbrus_2000) is a russian processor architecture based on VLIW/EPIC instruction set (like Intel Itanium (IA-64) architecture). Architecture has half native / half software support of most Intel/AMD SIMD (e.g. MMX/SSE/SSE2/SSE3/SSSE3/SSE4.1/SSE4.2/AES/AVX/AVX2 & 3DNow!/SSE4a/XOP/FMA4).
It also has built-in x86/x86_64 <-> e2k binary translators (RTC, http://www.mcst.ru/rtc and Lintel, http://www.mcst.ru/lintel) that can run code for x86/x86_64 architecture (Transmeta did something similiar with their Crusoe series) with SIMD extensions support.
Attached patch allows SDL2 to detect extensions supported by E2K like MMX, 3dNOW!, AVX etc. (test/testplatform log: https://termbin.com/7qs3).
wahil1976
This patch adds support for OpenBSD to KMSDRM_LEGACY. Note that the patch won't be ported to the atomic KMSDRM backend because OpenBSD does not support atomic KMS properly yet.
Is automatically used when the SRW SDL_mutex implementation is active.
Otherwise falls back to the generic implementation.
v2: - Rebase onto master fa3ea1051a4b
https://bugzilla.libsdl.org/show_bug.cgi?id=5308
The udev code labels devices that are found by this code with
ID_INPUT_KEY which in turn gets used by SDL to label the devices as
SDL_UDEV_DEVICE_KEYBOARD.
This was missing for the code path when udev is not running and as such
devices such as the power button of a phone was not detected as keyboard
input and no devices were emitted.
Cameron Cawley
stdlib: Added SDL_round, SDL_roundf, SDL_lround and SDL_lroundf
The default implementation is based on the one used in the Windows RT video driver.
Keep Semaphore Kernel Object impl for Windows 7 and older - choose at runtime
v2: - Fix mixed int/LONG types
- Reorder definitions
- Add missing include
v3: - Use `GetModuleHandle()` to load the API Set
v2: - Add SRW definitions as suggested by Ozkan Sezer
Allows building against older platform headers.
- Rename "hidden" function parameter `mutex_` to `_mutex`
v3: - Use GetModuleHandle instead of LoadLibrary
- Fix typo in comment
SDL_systhread.c and SDL_syslocale.c used to call LoadLibrary() without
calling FreeLibrary() later. GetModuleHandleW() should always succeed
because GetModuleHandleW() itself is imported from kernel32.dll and we
don't need to bother releasing it.
.. so that KMSDRM_CreateDevice() can fail and SDL_VideoInit() would
move on to next bootstrap member which is kmsdrm_legacy. hopefully
fixes bug #5393.
Substring
I was trying the KMSDRM video backend with some very simple programs that were working ok on 2.0.12. The same code won?t work on the current dev branch and I get:
DEBUG: check_modesetting: probing ?/dev/dri/card0?
DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6
DEBUG: check_modesetting: probing ?/dev/dri/card0?
DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6
DEBUG: KMSDRM_VideoInit()
DEBUG: Opening device /dev/dri/card0
DEBUG: Opened DRM FD (3)
DEBUG: no atomic modesetting support.
DEBUG: Video subsystem has not been initialized
INFO: Using SDL video driver: (null)
DEBUG: Video subsystem has not been initialized
After carefully checking, the radeon driver doesn?t support atomic modesetting. That?s not the only problem : the same happens with the amdgpu driver if we disable Display Core (kernel parameter amdgpu.dc=0, which is required to get analogue outputs working).
This is a major regression in the KMSDRM driver.
Using atomic mode setting is great, but having no fallback to the "standard KMS" is bad.
pj5085
I added some printf to verify the math being done. Of the three joysticks I have, it works correctly for at least two, and seems to work correctly for the third. I say "seems to" because, for the third joystick, the values never go through the AxisCorrect function, and thus never hit my printf statements, even though they did in the version I wrote my patch against. I'm not sure what's going on there, but it at least seems to be working correctly in as much as I can tell.
I note this result in particular, for an SNES Gamepad (min=0, max=255):
Joystick value 0 becomes -32768
Joystick value 127 becomes 0
Joystick value 255 becomes 32767
Without the code that forces a zero point, the 127 input value would become -129, so I think you see why I added that code to turn it into zero. However, I think Kai Krakow has a point about how SDL shouldn't assume that there should be a center.
Obviously in the majority of cases there actually should be a center, and the code that turns that 127 into an actual 0 is creating only a 0.2% error over 0.4% of this joystick's range. However, what if there is an axis that is some kind of special control, like a 4-position switch, and, for whatever reason, the joystick reports it as an axis with 4 possible values, 0 to 3? In that case, mutilating the two center values to the same value is much more of an error and and turns that 4-position switch into a 3-position switch. If any joystick does this with a 2-position switch, then this code would render that control entirely useless as it would report the same value with the switch in either position. Obviously the code could require that there be at least N possible values, to guess whether something is a proper axis or just some kind of switch, but the choice of N would be arbitrary and that's ugly.
I guess the real problem here is that my gamepad is just kind of broken. It should be reporting a range of -1 to +1 since that's what it actually does. Also, as Kai Krakow points out, it's probably not SDL's place to fix broken hardware. I'll add that, if SDL does fix broken hardware, it should probably actually know that it's broken rather than be merely guessing that it is.
So, to the extent that SDL is able to do stuff like this, perhaps it's something better left for the user to configure in some kind of config file.
pj5085
It occurred to me that my simple patch that comments out a few lines of code does not correctly remove the dead zone since the calculation presumably assumes the dead zone has been cut out of the range. Then, while looking into how to make it output the correct range of values, I realized SDL wasn't returning the correct range of values to begin with.
This line of code was already present:
printf("Values = { %d, %d, %d, %d, %d }\n", absinfo.value, absinfo.minimum, absinfo.maximum, absinfo.fuzz, absinfo.flat);
For my joystick this yeilds:
Values = { 0, -127, 127, 0, 15 }
Then this code calculates the coefficients:
In SDL1:
joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) / 2 - absinfo.flat;
joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) / 2 + absinfo.flat;
t = ((absinfo.maximum - absinfo.minimum) / 2 - 2 * absinfo.flat);
if ( t != 0 ) {
joystick->hwdata->abs_correct[i].coef[2] = (1 << 29) / t;
} else {
joystick->hwdata->abs_correct[i].coef[2] = 0;
}
In SDL2:
joystick->hwdata->abs_correct[i].coef[0] = (absinfo.maximum + absinfo.minimum) - 2 * absinfo.flat;
joystick->hwdata->abs_correct[i].coef[1] = (absinfo.maximum + absinfo.minimum) + 2 * absinfo.flat;
t = ((absinfo.maximum - absinfo.minimum) - 4 * absinfo.flat);
if (t != 0) {
joystick->hwdata->abs_correct[i].coef[2] = (1 << 28) / t;
} else {
joystick->hwdata->abs_correct[i].coef[2] = 0;
}
Neither calculates the correct coefficients for the code in the AxisCorrect function.
In SDL1:
if ( value > correct->coef[0] ) {
if ( value < correct->coef[1] ) {
return 0;
}
value -= correct->coef[1];
} else {
value -= correct->coef[0];
}
value *= correct->coef[2];
value >>= 14;
In SDL2:
value *= 2;
if (value > correct->coef[0]) {
if (value < correct->coef[1]) {
return 0;
}
value -= correct->coef[1];
} else {
value -= correct->coef[0];
}
In SDL1, the calculated coefficients are coef[0]=15, coef[1]=-15 and coef[2]=5534751. So with a full-scale input of 127, it calculates an output value of 37835, which is considerably out of range.
In SDL2, the calculated coefficients are coef[0]=30, coef[1]=-30, and coef[2]=1383687. So with a full-scale input of 127, it calculates the same output value of 37835.
I tested it with the 3 joysticks I have, and it produces out-of-range values for all of them.
Anyway, since dead zones are garbage, I just deleted all of that junk and wrote some code that takes the absinfo.minimum and absinfo.maximum values and uses them to scale the axis range to -32767 through +32767.
I also made it detect when a range doesn't have an integer center point, e.g. the center of -128 to + 127 is -0.5. In such cases, if either value to the side of the center is provided, it zeros it, but it otherwise doesn't implement any kind of dead zone. This seemed important with my gamepad which provides only the values of 0, 127, and 255, since without this hack it would never be centered.
Also, the previous minimum output value was -32768, but as that creates an output range that has no true center, I changed the minimum value to -32767.
I tested it with the 3 joystick devices I have and it seems to create correct values for all of them.
Added a hint to control whether a separate thread should be used for joystick events.
This is off by default because dispatching messages in other threads appears to cause problems on some versions of Windows.
- SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title
or message field to "" if either of them is NULL.
- SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to ""
if either of them is NULL for EMSCRIPTEN builds.
- SDL_bmessagebox.cc: add empty string check along with NULL check for
title and message fields.
- SDL_windowsmessagebox.c (AddDialogString): remove NULL string check
- SDL_windowsmessagebox.c (AddDialogControl): add empty string check
along with the NULL check.
- SDL_x11messagebox.c: revert commit 677c4cd68069
- SDL_os2messagebox.c: revert commit 2c2a489d76e7
- test/testmessage.c: Add NULL title and NULL message tests.
Joel Linn
TLDR; https://godbolt.org/z/43fd8G
Let's deduce this from C++ reference code:
https://docs.microsoft.com/en-us/cpp/cppcx/wrl/how-to-activate-and-use-a-windows-runtime-component-using-wrl?view=msvc-160
At the bottom of the page there is this snippet:
```
int wmain()
{
/* ... more code ... */
// Get the domain part of the URI.
HString domainName;
hr = uri->get_Domain(domainName.GetAddressOf());
if (FAILED(hr))
{
return PrintError(__LINE__, hr);
}
// Print the domain name and return.
wprintf_s(L"Domain name: %s\n", domainName.GetRawBuffer(nullptr));
// All smart pointers and RAII objects go out of scope here.
}
```
`HString` is defined in `corewrappers.h` and the call chain for the destructor is:
`~HString() -> Release() -> ::WindowsDeleteString()`
QED
Vincent Hamm
Xcode11 and ios13 added support for metal simulator.
Here is a quick and dirty patch to enable it. Pretty early and only tested on a few samples for now. Required mostly to enable metal support on correct version of ios, generate simulator compatible shaders and enforce buffer alignments on simulator (same as osx).
If we fail to connect to the the pa server, we have an assigned context
and mainloop that isn't connected. So, when PULSEAUDIO_pa_context_disconnect
is called, pa asserts and crashes the application.
Assertion 'pa_atomic_load(&(c)->_ref) >= 1' failed at pulse/context.c:1055, function pa_context_disconnect(). Aborting.
Joel Linn
Eliminate additional heap allocation for short-lived HSTRINGs.
Uses `WindowsCreateStringReference()` to disable reference counting and memory management by the Window Runtime.
Ivan Mogilko
With SDL 2.0.12 under MS Windows, if the window is partially offscreen calling SDL_SetWindowGrab(w, SDL_TRUE) works, but subsequent call to SDL_SetWindowGrab(w, SDL_FALSE) does not work.
I tested this in both real program, and a small test app, where unlocking cursor worked perfectly while window is fully in desktop bounds, but did not work if it was at least few pixels outside.
For the reference, following code is enough to reproduce the issue:
#include <windows.h>
#include <SDL.h>
int WinMain(
HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpCmdLine,
int nShowCmd)
{
SDL_Init(SDL_INIT_VIDEO);
SDL_Window* w = SDL_CreateWindow("", SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED, 640, 400, 0);
bool grabbed = false;
bool want_quit = false;
while (!want_quit)
{
SDL_Event event;
while (SDL_PollEvent(&event))
{
switch (event.type)
{
case SDL_QUIT: want_quit = true; break;
case SDL_KEYDOWN:
if (event.key.keysym.scancode == SDL_SCANCODE_SPACE)
{
SDL_SetWindowGrab(w, static_cast<SDL_bool>(!grabbed));
grabbed = !grabbed;
}
}
}
}
SDL_DestroyWindow(w);
SDL_Quit();
return 0;
}
Mathieu Eyraud
SDL dynamically loads libusb but does not check the return value of 'SDL_LoadFunction'.
Also libusb is loaded and initialized several time because 'SDL_hidapi_wasinit' is never set to true.
I made a patch if you want to test:
- check that 'hid_init' is called once and only once,
- check return value of 'hid_init',
- check return value of 'SDL_LoadFunction',
- check return value of 'SDL_malloc',
- add some debug logging.
On older mac, where METAL Renderer METAL fails to create, it allows to switch back to OpenGL SDL_Renderer
by re-creating the window (METAL flags was previously persistent).
This can happen if the application has not yet processed SDL_JOYDEVICEADD when
the same joystick is removed. It may also happen if two joysticks are added
and the second joystick is removed before the first joystick's SDL_JOYDEVICEADD
has been processed by the application.
Joel Linn
Currently the rawinput driver always reports a device as "wired". This changes that to "unknown" and updates it once the device is correlated with xinput.
Most of the raw input events are dispatched in the main windows message loop. We only dispatch device change messages separately when we need them to be completely up to date.
It's legitimate to have a surface with 0 width or height (null 'pixels' pointer).
But calling SDL_FillRects would wrongly set the error "You must lock the surface".
src/joystick/windows/SDL_rawinputjoystick.c: In function 'RAWINPUT_HandleStatePacket':
src/joystick/windows/SDL_rawinputjoystick.c:1343:9: warning: suggest explicit braces to avoid ambiguous 'else'
multiply gyro values by sensitivity
When the hardware calibration fails, values read from sensors need to be multiplied by default sensitivity (16 for gyro, 1 for accelerometer).
Simon McVittie
When watching for hotplug events we can poll the inotify fd, but we
still need to scan /dev/input once per process, otherwise we'll fail
to detect devices that were already connected.
Flatpak[1] and pressure-vessel[2] are known to use user namespaces,
therefore udev event notification via netlink won't work reliably.
Both frameworks provide a filesystem API that libraries can use to
detect them. Do that, and automatically fall back from udev-based
device discovery to the inotify-based fallback introduced in Bug #5337.
[1] <https://flatpak.org/>
[2] <https://gitlab.steamos.cloud/steamrt/steam-runtime-tools/-/tree/master/pressure-vessel>
Signed-off-by: Simon McVittie <smcv@collabora.com>
Alex S
Evdev headers aren't actually included in the base system (well, it has a private copy), they are available through the devel/evdev-proto port instead. We also have devel/libinotify and devel/libudev-devd shims, I didn't verify whether they work with SDL.
This fixes bad report parsing for various newer Xbox controllers, and this driver is now preferred over XInput, since it handles more than 4 controllers.
C.W. Betts
This patch adds support to the GameController framework on macOS Big Sur and later, adding support for MFi controllers as well as rumble support for PS4 and Xbox One. There is some code to make sure that the IOKit joystick handler doesn't include two controllers at once.
While the GameController framework is present in earlier versions of macOS, there was no public, approved way of checking if a specific IOHIDDevice is a controller that GameController could handle. This was changed in Big Sur.
Added support for the PS4 controller gyro and accelerometer on iOS and HIDAPI drivers
Also fixed an issue with the accelerometer on iOS having inverted axes
As the name suggests, the hint should only apply to SDL_THREAD_PRIORITY_TIME_CRITICAL
The resulting priorities for my current distro result in these values:
| High | Time Critical
Hint |--------------|-----------------
0 | P=10 N=-10 | P=5 N=-15
1 | P=10 N=-10 | P=-21 N=0
Spooky
For some reason the Logitech Extreme 3D joystick was added to SDL_gamecontrollerdb.h in the linux section only.
This breaks the joystick in linux as it is not a gamepad. I am unable to correctly use or map the Logitech Exteme 3D joystick in games that use SDL2 in linux.
Please remove Logitech Extreme 3D from SDL_gamecontrollerdb.h Linux section. It is a joystick not a gamepad.
Bart van der Werf
When directinput fails to load, but a controlller is plugged in, an access violation happens.
This is due to IEventHandler_CRawGameControllerVtbl_InvokeAdded calling SDL_DINPUT_JoystickPresent which does not check if dinput is assigned signalling initialization of directinput.
Joel Linn
This fixes two types of MSVC compiler warnings.
- One parameter in the function signatures of two WGI event handlers had one level of indirection too much (and did not match Windows SDK headers). The indirection was cast away so it still worked.
- size_t was implicitly cast to UINT32 for a number of (constant) string lengths.
wahil1976
This patch adds the KBIO text input driver for FreeBSD, which allows text input to fully work without text spilling out into the console. It also supports accented input, AltGr keys and Alt Lock combinations.
Tested with US accent keys layout and various AltGr layouts.
This improves SDL's ability to detect joystick hotplug in a container
environment.
We cannot reliably receive events from udev in a container, because they
are delivered as netlink events, which are authenticated by their uid
being 0. However, in a user namespace created by an unprivileged user
(for example bubblewrap, as used by Flatpak and Steam's
pressure-vessel-wrap), the kernel does not allow us to map uid 0, and
the netlink events appear to be from the kernel's overflowuid (typically
65534/nobody), meaning libudev cannot distinguish between genuine uevents
from udevd and an attack by a malicious local user.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Anything with X, Y and Z axes but no buttons is probably an
accelerometer (this is the assumption made in udev).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Previously we only checked for at least one button or key and at least
the X and Y absolute axes, but this has both false positives and false
negatives.
Graphics tablets, trackpads and touchscreens all have buttons and
absolute X and Y axes, but we don't want to detect those as joysticks.
On normal Linux systems ordinary users do not have access to these
device nodes, but members of the 'input' group do.
Conversely, some game controllers only have digital buttons and no
analogue axes (the Nintendo Wiimote is an example), and some have axes
and no buttons (steering wheels or flight simulator rudders might not
have buttons).
Use the more elaborate heuristic factored out from SDL's udev code path
to handle these cases.
In an ideal world we could use exactly the same heuristic as udev's
input_id builtin, but that isn't under a suitable license for inclusion
in SDL, so we have to use a parallel implementation of something
vaguely similar.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This works on capability bitfields that can either come from udev or
from ioctls, so it is equally applicable to both udev and non-udev
input device detection.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Device enumeration via libudev can fail in a container for two reasons:
* the netlink protocol between udevd and libudev is considered private,
so there is no API guarantee that the version of libudev in a container
will understand netlink messages from a dissimilar version of udevd
on the host system;
* the netlink protocol between udevd and libudev relies for security on
being able to check the uid of each message, but in a container with
a user namespace where host uid 0 is not mapped, the libudev client
cannot distinguish between messages from host uid 0 and messages from
a different, malicious user on the host
To make this easier to experiment with, always compile the fallback
code path even if libudev is disabled. libudev remains the default if
enabled at compile time, but the fallback code path can be forced.
Signed-off-by: Simon McVittie <smcv@collabora.com>
GetAsyncKeyState() and GetRawInputData() report the state of the physical
buttons without applying the user's primary/secondary mouse button swap
preference. Swap the buttons returned from these functions, so we expose a
consistent view of the buttons to SDL callers. This new behavior also matches
the behavior of macOS and X11 backends.
See the Remarks section of the GetAsyncKeyState() function on MSDN.
We should only perform the VK_LEFT, VK_UP, etc. mapping if none of the other
special mappings apply. This allows the scancode normalization for the number
pad to take place as intended.
When we request realtime priority from rtkit, we have a rttime limit. If we exceed
that limit, the kernel will send SIGKILL to the process to terminate it.
This isn't something that most high priority processes will want, only processes
that selectively opt into SCHED_RR/FIFO through SDL_HINT_THREAD_PRIORITY_POLICY
should be subject to this level of scrutiny.
This change:
* Switches non-apple posix OSs to use SCHED_OTHER instead of SCHED_RR
for SDL_THREAD_PRIORITY_HIGH/SDL_THREAD_PRIORITY_TIME_CRITICAL.
* Fixes using a hardcoded RLIMIT_RTTIME, instead queries it from rtkit
* Only sets RLIMIT_RTTIME for MakeRealtime rtkit requests
* Adds a note regarding the possible SIGKILL with SDL_HINT_THREAD_PRIORITY_POLICY
* Introduces SDL_HINT_THREAD_FORCE_REALTIME_TIME_CRITICAL to allow apps to acquire realtime scheduling policies on Linux
CPU Vendor ID "Shanghai" and "CentaurHauls" belongs to Zhaoxin.
Background:
Shanghai Zhaoxin Semiconductor Co., Ltd ("Zhaoxin") , established in 2013,
headquartered in Zhangjiang, Shanghai, China. Zhaoxin aims at providing
general-purpose x86 processors.
Related Zhaoxin Linux Kernel patch can be found at
https://lore.kernel.org/lkml/01042674b2f741b2aed1f797359bdffb@zhaoxin.com
Best regards.
Debugging inside rtkit showed we were failing the RLIMIT_RTTIME check, now that we're asking for realtime and not just high-priority due to a change in SDL.
Between that and the DBus code in SDL being wrong in previous changelist I'm not sure how this could have ever worked.
Nov 02 20:34:15 redcore rtkit-daemon[2825]: Failed to parse MakeThreadRealtime() method call: Argument 1 is specified to be of type "uint32", but is actually of type "int32"
Nov 02 20:34:15 redcore rtkit-daemon[2825]: Failed to parse MakeThreadRealtime() method call: Argument 1 is specified to be of type "uint32", but is actually of type "int32"
Docs:
http://git.0pointer.net/rtkit.git/tree/README
CLIENTS:
To be able to make use of realtime scheduling clients may
request so with a small D-Bus interface that is accessible on
the interface org.freedesktop.RealtimeKit1 as object
/org/freedesktop/RealtimeKit1 on the service
org.freedesktop.RealtimeKit1:
void MakeThreadRealtime(u64 thread_id, u32 priority);
void MakeThreadHighPriority(u64 thread_id, s32 priority);
wcodelyokoyt
The atom name that X11_GetAtomName() returns never gets freed, which result in a minor memory leak (14 bytes?) every time the user drops a file on a window.
You can see the line in question here:
6b6170caf6/src/video/x11/SDL_x11events.c (L1350)
Fix: call XFree on name after the while loop.
Joel Linn
This patch fixes a MSVC warning, which is dependent on the regional settings of the build system. Although the character is inside a comment and harmless, it is undesirable to disable the warning for this.
OpenGL leaves the final line segment open, SDL's software renderer does not,
so we need a tiny bit of trigonometry here to move one more pixel in the right
direction.
Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver
PS4 and PS5 controllers use AUX1 to represent the touchpad button
Nintendo Switch Pro controllers use AUX1 to represent the capture button
This allows one to build Raspberry Pi versions on an ancient version of
Raspbian and get both the KMSDRM and RPI video targets built into SDL, giving
maximum binary compatibility from linking against an older glibc, etc, but
also making one library that can access video on all RPi models and OS
releases.
batyastudios
Basicly there is problem and somewhat a solution: https://discourse.libsdl.org/t/setwindowmaximumsize-bug/28267
If you SDL_SetWindowMaximumSize() after SDL_SetWindowMinimumSize() with one of axes have the same value, function will have no effect.
This: (line 2144@SDL_video.c)
if (max_w <= window->min_w || max_h <= window->min_h) {
SDL_SetError("SDL_SetWindowMaximumSize(): Tried to set maximum size smaller than minimum size");
return;
}
May be changed to this:
if (max_w < window->min_w || max_h < window->min_h) {
SDL_SetError("SDL_SetWindowMaximumSize(): Tried to set maximum size smaller than minimum size");
return;
}
When converting audio from signed to unsigned values of vice-versa
the silence value chosen by SDL was the value of the device, not
of the stream that the data was being put into. After conversion
this would lead to a very high or low value, making the speaker
jump to a extreme positon, leading to an audible noise whenever
creating, destroying or playing scilence on a device that reqired
such conversion.
UnmapNotify event does not mean that window has been iconified. It
just reports that window changed state from mapped to unmapped.
XReparentWindow can unmap and remap window if it was mapped. This
causes unnecessary events - HIDDEN, MINIMIZED, RESTORED and SHOW.
These events are problematic with Metacity 3.36+ which started to
remove window decorations from fullscreen windows.
- SDL makes decorated window fullscreen
- Metacity removes decorations
- SDL gets UnmapNotify and exits from fullscreen
- Metacity re-adds decorations
As SDL will also get MapNotify event it will try to restore
window state causing above steps to repeat.
https://bugzilla.libsdl.org/show_bug.cgi?id=5314
Add a minimal my_gradd.h containing structures and constants only used
by SDL_os2vman.c -- based on public knowledge from around the internet
including pages from http://www.osfree.org and http://www.edm2.com .
Original code assigned MCIMixSetup.ulSamplesPerSec value to it, but it
is just the freq... We now change spec->samples only either if it is 0
or we changed the frequency, by picking a default of ~46 ms at desired
frequency (code taken from SDL_audio.c:prepare_audiospec()).
With this, the crashes I have been experiencing are gone.
- video: VideoBootStrap->available() is gone.
- thread: all important SDL_CreateThread internal data now put into
struct SDL_Thread: changes to SDL_SYS_CreateThread().
- events / video: SDL_SetDoubleClickTime() removed -- functionality
moved to SDL_mouse.c:SDL_MouseDoubleClickTimeChanged().
- video: struct SDL_VideoDevice-> CreateWindow and CreateWindowFrom
members renamed to CreateSDLWindow and CreateSDLWindowFrom
Has been happening with testfilesystem from 2.0.6 and newer because
of commit 572a721879ef.
Also set error strings in certain error conditions.
Also applied coding style / whitespace fixes, while I was there.
- Displays may have been added, removed or changed and all cached monitor
handles are invalidated as a result.
- Display events are handled in three steps:
1. Mark all currently know displays as invalid
2. Enumerate all displays, adding new ones and marking known displays as valid
3. Remove all displays still invalid after enumeration
- Display connect/disconnect events are sent when displays are added or removed
after initial setup
(Also see: https://bugzilla.libsdl.org/show_bug.cgi?id=4822)
Building the current tree against 10.8 SDK, clang emits the following warning:
src/video/cocoa/SDL_cocoawindow.m:1846:27: warning: instance method '-isOperatingSystemAtLeastVersion:' not found (return type defaults to 'id') [-Wobjc-method-access]
![processInfo isOperatingSystemAtLeastVersion:version]) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/opt/MacOSX10.8.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSProcessInfo.h:20:12: note: receiver is instance of class declared here
@interface NSProcessInfo : NSObject {
^
1 warning generated.
isOperatingSystemAtLeastVersion is an 10.10 thing.
loadNibNamed:owner:topLevelObjects is available on 10.8 and newer.
There is an issue report here about an app failing to function on
10.7 and earlier: https://discourse.libsdl.org/t/28179
I _think_ this is a right thing to do; it fixes a .wav file I have here that
has blockalign==2 when channels==2 and bitspersample==16, which otherwise
would fail.
Add hint SDL_HINT_ANDROID_BLOCK_ON_PAUSE_PAUSEAUDIO not to pause audio when
the app goes to background.
(It requires SDL_ANDROID_BLOCK_ON_PAUSE as "Non blocking")
SDL_cocoametalview was consuming the first click rather than passing it
through to the SDLView underneath which overrides [NSView acceptsFirstMouse]
based on the user's SDL_HINT_MOUSE_FOCUS_CLICKTHROUGH preference.
that are mapped to it and automatically invalidate them when it is freed
- refcount is kept so that an external application can still create a reference
to SDL_Surface.
- lock_data was un-used and is now renamed and used as a list keep track of the blitmap
"In the second half of 2021, new apps will be required to publish with the Android App Bundle on Google Play"
(see https://developer.android.com/guide/app-bundle)
And "Android App Bundles don't support APK expansion (*.obb) files".
It is a protocol error to attempt to create a pointer confine (i.e.
`SDL_SetWindowGrab`) while a locked pointer is active, and vice-versa.
Instead of aborting due to a protocol error, this commit makes SDL
gracefully downgrade locked pointers to confines when appropriate.
We now handle HiDPI correctly, and touches are clamped to the viewport. So
if you are rendering to a logical 640x480 in a 720p window, and touch the
letterboxing at point (640,700), it will report the touch at (0.5,1.0) instead
of outside the documented range.
Previously the first card with non-empty connectors, encoders
and crtcs would be selected, however KMSDRM_VideoInit could still reject
it if the connector was not connected. This allow finding the first card
(in a multi GPU setup) that is actually connected to a display.
Manuel Alfayate Corchete
I noticed pt2-clone had problems with it's optional hardware mouse on the KMSDRM backend: cursor had a transparent block around it.
So I was investigating and it seems that a GBM cursor needs it's pixels to be alpha-premultiplied instead of straight-alpha.
A
lso, I was previously relying on "manual testing" for the cursor size, but it's far better to use whatever the DRM driver recommends via drmGetCap(): any working driver should make a size recommendation via drmGetCap(), so that's what we use now. I took this decision because I found out that the AMDGPU driver reported working cursor sizes that would appear garbled on screen, and only the recommended cursor size works.
This fixes a case where you render to the backbuffer, then render to a render
target, set the current target back to the backbuffer, and then present
without drawing anything else; in this circumstance, the Present command
would never happen.
Fixes Bugzilla #5011.
This is handled in in the higher-level SDL_GL_LoadLibrary().
All uses of SDL_EGL_LoadLibrary (which calls the Only version) are just
target-specific wrappers for their own GL_LoadLibrary hook, with two
exceptions which now handle driver_loaded correctly (although it's
questionable if these init-if-no-one-did-it-correctly-already code blocks
should exist at all, fwiw).
Fixes Bugzilla #5190.
Instead of creating an X11 connection to test that X11 is available,
closing the connection, and then reconnecting for real, use the same
connection to handle both cases.
The X11 connection retry delay mechanism in the case where X11 is
dynamically loaded has been removed. It was only necessary to avoid
authetnication token reuse from the XOpenDisplay call that used to
exist in X11_Available. Now that this call is only made once, it
is no longer needed.
Also drop unused and inapplicable code from a comment.
***
The two are only ever called together, and combining them makes it possible
to eliminate redundant symbol loading and redundant attempts to connect
to a display server.
Manuel Alfayate Corchete
This small patch fixes the KMSDRM_CreateSurfaces() call in KMSDRM_CreateWindow(), that was segfaulting deeper into SDL internals because the windata->viddata pointer wasn't set before the KMSDRM_CreateSurfaces() call.
So that's what this small patch does.
Now, L?VE2D works perfectly well on the Raspberry Pi 3, instead of just segfaulting.
JackBoosY
In src/video/winrt/SDL_winrtgamebar.cpp line 55:
virtual HRESULT STDMETHODCALLTYPE add_VisibilityChanged(
__FIEventHandler_1_IInspectable *handler,
Windows::Foundation::EventRegistrationToken *token) = 0;
The macro __FIEventHandler_1_IInspectable defined in windows.fondation.h(Windows10 SDK 10.0.17763.0) line 3576:
#define __FIVector_1_Windows__CFoundation__CPoint ABI::Windows::Foundation::Collections::__FIVector_1_Windows__CFoundation__CPoint_t
but no longer exists in Windows 10 SDK 10.0.19041.0.
After searching this macro in the sdk include path, I found that it was defined in many header files. But it should be replaced in windows.system.h .
On some systems, GetClipCursor() impacts performance when called frequently, so only call it every once in a while to make sure we haven't lost our capture.
Manuel Alfayate Corchete
I'm trying to build SDL2 with threads support here in GNU/Linux, both X86 and ARM, and it does not seem to be possible ATM:
/home/manuel/src/SDLLLL/src/core/linux/SDL_threadprio.c:233:26: error: 'rtkit_max_realtime_priority' undeclared (first use in this function)
Manuel Alfayate Corchete
This patch is needed so programs that do this work as expected:
1) Start in a different video mode than the mode used by the system and then...
2) Try to go fullscreen with the mode originally used by the system via SetWindowFullScreen() with the SDL_WINDOW_FULLSCREEN_DESKTOP flag.
An example would be pt2-clone in https://github.com/8bitbubsy/pt2-clone.
This program does this:
Starts with:
video.window = SDL_CreateWindow("", SDL_WINDOWPOS_CENTERED,
SDL_WINDOWPOS_CENTERED, screenW, screenH, windowFlags);
and then, *IF* the user has configured it in fullscreen mode in its .ini, it tries to go fullscreen with the desktop mode:
SDL_SetWindowFullscreen(video.window, SDL_WINDOW_FULLSCREEN_DESKTOP);
This sequence of operations is currently failing because SDL_SetDisplayModeForDisplay() in SDL_video.c fails because display->desktop_mode is not being initialized with its correct value: SetDisplayMode() in SDL_kmsdrmvideo.c will not be able to set the mode because it detects the mode to have a driverdata of 0x0 ("if (!modedata)") and rightfully returns an error.
So, the included patch fixes this small problem, and programs that first change the video mode and then try to go fullscreen with the system video mode will now work.
The patch simply fixes an small omission, but its really needed now that dynamic video mode changing was implemented on the KMSDRM backend.
Ryan C. Gordon
As discussed here:
https://discourse.libsdl.org/t/question-about-implementation-of-sdl-updatewindowsurfacerects/27561
"As you can see this function [WIN_UpdateWindowFramebuffer, in src/video/windows/SDL_windowsframebuffer.c] calls BitBlt on entire screen, even though it accepts the rects. Rects variable is not even used in this function at all. Now my question is why is that the case?"
Anthony Pesch
I was looking into my own input bug and noticed an issue in the HIDAPI code while looking over it. I don't have a controller that goes down this path to test and try to provoke the issue, but it looks pretty straight forward.
The memmove to shift the joystick id array on disconnect isn't scaling the size by sizeof(SDL_JoystickID), likely corrupting the ids on disconnect.
It currently behaves like a locking key which is pressed
when Caps Lock is enabled and released when disabled. This
means that apps that trigger events on Caps Lock key down will
only fire these events every other time Caps Lock is pressed.
Lacky
It looks like refactoring of SDL2 internal API has broken SDL_RenderFillRect for DirectFB. In new version function SDL_RenderFillRect returns 0, but rectangle is not visible.
Replacing "count" with "len" in the argument list for SDL_memcpy in DirectFB_QueueFillRects fixes problem.
Jan Bujak
I wrote a new driver for my gamepad on Linux. I'd like SDL to support it out-of-box, as currently it just treats it as a generic joystick instead of a gamepad. From what I can see the only way to do that is to either 1) pick one of the already supported controllers' PID, VID and button layouts and have my driver send that (effectively lying that it's something else), or 2) submit a preconfigured, hardcoded mapping to SDL.
Both of those, in my opinion, are silly when we already have the Linux Gamepad Specification which standarizes this:
https://www.kernel.org/doc/html/v4.15/input/gamepad.html
Unfortunately SDL doesn't make use of it currently. So I've took it upon myself to add it; patch is in the attachments.
Basically what the patch does is that if SDL finds no built-it controller mappings for a given joystick it then asks the joystick backend to autodetect it, and that uses the relevant evdev bits to figure out which button/axis is which. (See the specs for more details.)
With this patch applied my own driver for my controller works out-of-box with SDL with no extra configuration and is correctly recognized as a gamepad; this is also going to be the case for any other driver which follows the Linux Gamepad Specification.
Arithmatic operations promote Uint8 to signed int. If the top bit of a
Uint8 is set, and it is left shifted 24 places, then the result is not
representable in a signed 32 bit int. This would be undefined behaviour
on systems where int is 32 bits.
It makes it clearer who owns the memory, and more reasonable to free it on
failure in the creating function.
(and, of course, pacifies static analysis.)
Manuel Alfayate Corchete
On the KMSDRM backend, there is no such thing as a desktop, yet some programs could (and DO) use SDL_GetGlobalMouseState().
So I think its good idea that, in KMSDRM, it returns the same mouse coordinates anyway as SDL_GetMouseState() would return. There is nothing else it could return, as far as I can understand, since there is no desktop anyway.
This small patch does precisely that.
Manuel Alfayate Corchete
The KMSDRM backend was doing things wrong because of some small (but important) misconceptions on how KMS/DRM works: to implement a largely broken non-vsync refresh mechanism, the SwapWindow() function was issuing new pageflips before previous ones had completed, thus causing EBUSY returns, buffer mismanagement, etc... resulting in general breakage on vsync disabling from apps, that would not allow vsync to work again without KMSDRM video re-initialization.
To further clarify, on most DRM drivers async pageflips are NOT working nowadays, so all issued pageflips will complete on next VBLANK, NOT ASAP (calling drmModePageFlip() with the DRM_MODE_PAGE_FLIP_ASYNC flag will return error).
The old code was assuming that can just issue a synchronous (=on VBLANK) pageflip and then pass a 0 timeout to the pull() function so we do not wait for the pageflip event, thinking that this will lead to correct non-vsynced screen updates from the program: That is plain wrong.
Each pageflip has to be waite before issuing a new one, ALWAYS. And if we do not support ASYNC pageflips on the DRM driver level, then we are forced to wait for the next VBLANK. There is no way around it.
I have also added many comments on the KMSDRM code. This is needed for future reference for me or others who may need to look at this code: KMS/DRM terminology regarding what SYNC and ASYNC mean in pageflip terms, and where to do certain things and why, is not trivial. It is not desirable or possible to invest time on researching the same concepts every time there is need to dive into this code. So please leave all these comments in the patch.
1. Comment that SDL_SetThreadPriority will make any necessary system changes when applying priority.
2. Add a hint to override SDL's default behavior for scheduler policy.
3. Modify the pthreads SDL_SetThreadPriority so that instead of just using the current thread scheduler policy it will change it to a policy that should work best for the requested priority.
4. Add hint checks in SDL_SetThreadPriority so that #3 can be overridden if desired.
5. Modify the Linux SDL_SetThreadPriority so that in the case that policy, either by SDL defaults or from the hint, is a realtime policy it uses the realtime rtkit API.
6. Prior to calling rtkit on Linux make the necessary thread state changes that rtkit requires. Currently this is done every time as it isn't expected that SDL_SetThreadPriority will be called repeatedly for a thread.
michaeljosephmaltese
Display ends up taking only 1/4 of the screen area. It needs to call "setWantsBestResolutionOpenGLSurface:highdpi", like when creating a window the normal way.
wengxt
Due to the new major fcitx version is coming close, the existing code need to be ported to use new Fcitx dbus interface.
The new dbus interface is supported by both fcitx 4 and 5, and has a good side effect, which is that it will work with flatpak for free. Also the patch remove the dependency on fcitx header. Instead, it just hardcodes a few enum value in the code so need to handle the different header for fcitx4 or 5.
meyraud705
'SDL_Windows::driverdata' of a Wayland window is allocated by calloc in 'Wayland_CreateWindow' but freed by SDL_free in 'Wayland_DestroyWindow'.
meyraud705
I see how the documentation is confusing. I think that the choice of the axis is an implementation detail. The documentation should state the goal of this value, so I propose this wording:
"Use this value to play an effect on the steering wheel axis. This provides
better compatibility across platforms and devices as SDL will guess the
correct axis."
Value could even be renamed 'SDL_HAPTIC_STEERING_AXIS'.
For Linux, sending an effect on the X axis with a Logitech wheel works. Others brands don't have driver for Linux as far as I know.
This is only supported on PulseAudio. You can set a description when opening
your audio device that will show up in pauvcontrol, which lets you set
per-stream volume levels.
Fixes Bugzilla #4801.
dark_sylinc
Trying to build SDL with VS2019 using CMake will encounter a linking error
More specifically:
1>SDL_string.obj : error LNK2019: unresolved external symbol memset referenced in function SDL_vsnprintf_REAL
* 8BitDo N30 Pro 2
* 8BitDo SN30 Gamepad
* 8BitDo SN30 Pro+
* 8BitDo Zero 2
* SZMY-POWER PC Gamepad
* ThrustMaster eSwap PRO Controller
* ZEROPLUS P4 Wired Gamepad
In additional, all 8BitDo controllers use SDL_HINT_GAMECONTROLLER_USE_BUTTON_LABELS to have the correct mapping based on user preferences.
This patch removes deferred error string formatting: now we do it during
SDL_SetError(), so there's no limit on printf-style arguments used.
Also removes stub for managing error string translations; we don't have the
facilities to maintain that and the way we set arbitrary error strings
doesn't really make this practical anyhow.
Since the final error string is set right away and unique to the thread,
we no longer need a static buffer for legacy SDL_GetError(), and we don't
have to allocate 5x 128-byte argument fields per-thread. Also, since we now
use SDL_vsnprintf instead of parsing the format string ourselves, there's a
lot of code deleted and we have access to more robust formatting powers now.
This does mean the final error strings can't be more than 128 bytes, down
from the theoretical maximum of around 768, but I think this is probably okay.
They might truncate but they will always be null-terminated!
Fixes Bugzilla #5092.
The joystick layer can't necessarily give us perfect centering, but we know
that the game controller level has logical absolute idle positions that have
nothing to do with the physical device.
So send game controller events to make it look like the device is completely
untouched before sending the final removal event.
This driver supports the Razer Atrox Arcade Stick
Some of the quirks of this driver, inherent in Windows Gaming Input:
* There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers.
* You can't read the state of the guide button
* You can't get controller events in the background
meyraud705
On line 220 of SDL_hidapi_xbox360.c https://hg.libsdl.org/SDL/file/4608f0e6e8e3/src/joystick/hidapi/SDL_hidapi_xbox360.c#l220
if (!XINPUTGETSTATE(user_index, &xinput_state[user_index].state) == ERROR_SUCCESS) {
logical not is only applied to the left hand side of this comparison.
I think you mean:
if (XINPUTGETSTATE(user_index, &xinput_state[user_index].state) != ERROR_SUCCESS) {
On Raspberry Pi 3 via the VC4 driver in firmware KMS mode, none of the
found configs match the desired format, causing the function to fall through
without any config being selected.
Fix by first iterating over the found configs, and if no match exists,
don't exclude the non-matching configs. This should fix RPI3 and possibly other
targets without breaking targets that have a matching native format (such as RPI4).
This allows you to bind surfaceless contexts on a background thread to, for
example, load assets in a separate context, for platforms that have different
requirements about sharing surfaces, etc.
Martin's notes on the matter:
"Here's a patch that enables passing NULL windows to SDL_GL_MakeCurrent, if
the involved APIs allow it. Currently, this is only the case for EGL, and
even then only if some specific extensions are present (which they usually
are).
If "surfaceless" contexts are not supported, SDL_GL_MakeCurrent continues to
generate an error (albeit with a more specific error message than it used to),
so this should not break anything that wasn't broken before."
(Please see https://bugzilla.libsdl.org/show_bug.cgi?id=3695 for more
discussion.)
Fixes Bugzilla #3695.
This behavior matches SDL_RecreateWindow and makes it less likely that
another piece of code (e.g. a DestroyWindowFramebuffer implementation)
will attempt to use or free the stale surface pointer.
From hmk:
"When scaling is enabled (e.g. via SDL_RenderSetLogicalSize, size not equal
to window size), mouse motion events are also scaled. Small motions are
rounded up (SDL_max() when the value after scaling is less than 1), while
larger motions are truncated by the floating point -> integer conversion.
https://hg.libsdl.org/SDL/file/b18197f9bf9d/src/render/SDL_render.c#l658
The end result feels something like mouse reverse mouse acceleration + angle
snapping at low speeds, but less consistent (amount of truncation & rounding
depends on how fast the mouse is moved) and potentially much worse if the
scaling factor is large. This pretty much makes it useless for anything
where you need precise mouse aiming (think of games). I suspect this is why
aiming gets so terrible in some games that let you use scaling to reduce the
render resolution (e.g. Ion Fury).
With 4x4 scaling, I can reproduce a situation where it takes three fast flicks
of the mouse across the pad to undo one slow sweep across the pad. In other
words, extreme reverse acceleration. This does not happen when scaling is
disabled.
Furthermore, any game that uses relative mouse motion events for 3D camera
rotation probably wants the raw mouse deltas and not a value that depends on
scaling and resolution and rounding and truncation. Ideal camera rotation
just takes mouse input, multiplies it by sensitivity, and adds it to the
angle-in-radians or whatever measure is used for yaw & pitch. Pixels and
screen resolution or window dimensions should not be a part of the equation
at all, even if it could be implemented without rounding errors.
[...]
This [patch] completely eliminates angle snapping for me, and makes
sensitivity consistent. In other words, it's completely usable for, say,
aiming in a first person shooter."
Partially fixes Bugzilla #4811.
Caleb Cornett's comments:
"A few weeks ago, Alex added a partial Metal API to SDL2:
https://hg.libsdl.org/SDL/rev/22c8e7cd8d38
I noticed it was missing a few features that would help Metal become a
first-class citizen in SDL, so I went ahead and wrote them! Here are the new
APIs:
1. SDL_WINDOW_METAL flag for SDL_CreateWindow(). This allows the programmer
to specify that they intend to create a window for use with SDL_MetalView.
The flag is used to ensure correct usage of the API and to prevent
accidentally defaulting to OpenGL on iOS.
2. SDL_Metal_GetLayer(). This function takes a SDL_MetalView and returns a
pointer to the view's backing CAMetalLayer. This simplifies things
considerably, since in the current version of the SDL_Metal API the
programmer is required to bridge-cast a SDL_MetalView handle to an NSView or
UIView (depending on the platform) and then extract the layer from there.
SDL_Metal_GetLayer automatically handles all of that, making the operation
simple and cross-platform.
3. SDL_Metal_GetDrawableSize(). This function already exists in the current
SDL_Metal API (and is used behind-the-scenes for SDL_Vulkan_GetDrawableSize
on Apple platforms) but was not publicly exposed. My patch exposes this
function for public use. It works just like you'd expect.
Tested on macOS 10.14 and iOS 12.4."
Fixes Bugzilla #4796.
This does not account for scrollbars nor margins. But is much better then returning the full display size when not running fullscreen, but for example in an iframe.
The first terminator is for input parameters. The second terminator was for the
output parameters.
If an error occurs when calling MakeThreadHighPriority(), e.g. a bad thread id,
then the reply from connection_send_with_reply_and_block() will be null.
Anthony Pesch's notes on his patch:
"Currently, the WASAPI backend creates a stream in shared mode and sets the
device's callback size to be half of the shared stream's total buffer size.
This works, but doesn't coordinate will with the actual hardware. The hardware
will raise an interrupt after every period which in turn will signal the
object being waited on inside of WaitDevice. From my empirical testing, the
callback size was often larger than the period size and not a multiple of it,
which resulted in poor latency when trying to time an application based on the
audio callback. The reason for this looked something like:
* The device's callback would be called and and the audio buffer was filled.
* WaitDevice would be called.
* The hardware would raise an interrupt after one period.
* WaitDevice would resume, see that a a full callback had not been played and
then wait again.
* The hardware would raise an interrupt after another period.
* WaitDevice would resume, see that a full callback + some extra amount had
been played and then it would again call our callback and this process would
repeat.
The effect of this is that the pacing between subsequent callbacks is poor -
sometimes it's called very quickly, sometimes it's called very late.
By matching the callback's size to the stream's period size, the pacing of
calls to the user callback is improved substantially. I didn't write an actual
test for this, but my use case for this was my Dreamcast emulator
(https://redream.io) which uses the audio callback to help drive the emulation
speed. Without this change and with the default shared stream buffer (which
has a period of ~10ms) I would get frame times that were between ~3-30
milliseconds; after this change I get frame times of ~11-22 milliseconds.
Note, this patch also has a change that removes passing a duration to the
Initialize call. It seems that the default duration used (when 0 is passed)
does typically match up with the duration returned by GetDevicePeriod, however
the Initialize docs say:
> To set the buffer to the minimum size required by the engine thread, the
> client should call Initialize with the hnsBufferDuration parameter set to 0.
> Following the Initialize call, the client can get the size of the resulting
> buffer by calling IAudioClient::GetBufferSize.
This change isn't strictly required, but I made it to hopefully rule out
another source of unexpected latency."
Fixes Bugzilla #4592.