Andrey
Seems latest google angle library successfully built & tested under macOS'es.
https://github.com/google/angle
We need to use GLES2 to implement true cross-platform code.
New functions get and set the YUV colorspace conversion mode:
SDL_SetYUVConversionMode()
SDL_GetYUVConversionMode()
SDL_GetYUVConversionModeForResolution()
SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats.
Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
e_pluschauskas
I noticed that after updating SDL to 2.0.6 my application now exports SDL_main.
At GitHub SDL mirror (branch 2.0.5) SDL_main prototyped as
extern C_LINKAGE int SDL_main(int argc, char *argv[]);
but at branch 2.0.6 prototype is
extern C_LINKAGE DECLSPEC int SDL_main(int argc, char *argv[]);
Ozkan Sezer
EMX declares _beginthread() / _endthread() in stdlib.h, not process.h.
The attached patch updates the OS/2 case of SDL_thread.h for it. (It
also tidies the unreadable whitespace in win32 case.)
Note that apps submitted to the iOS App Store *must* use a modern iOS SDK (currently iOS 10 is probably the minimum), however the SDK used to build is separate from the minimum iOS version an app supports at runtime.
Ozkan Sezer
The patch below changes HAVE_COPYSIGN macro in SDL_config_windows.h to
HAVE__COPYSIGN, so that _copysign() can be used in SDL_stdlib.h which
is available in many more windows-targeting toolchains such as MinGW,
MSVC >= 6, etc, and not just MSVC >= 2013. SDL_stdlib.c already has a
specific check for HAVE__COPYSIGN, so I believe this is reasonable.
Simon Hug
When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug.
The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros.
It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config.
And there's an additional error message for when ftell fails.
Ozkan Sezer
HAVE_LIBSAMPLERATE_H is depending on HAVE_LIBC in current config.h.in:
it shouldn't be. HAVE_LIBUDEV_H, HAVE_DBUS_DBUS_H, HAVE_IBUS_IBUS_H,
HAVE_FCITX_FRONTEND_H, and HAVE_ALTIVEC_H have the same situation too.
I suggest something like the following, which moves them out of the
HAVE_LIBC confinement and also moves the windows dx header stuff along
side them. (Not ideal, but a bit cleaner I think.)
Ozkan Sezer
Cmake checks for float.h, but configure does not: the attached patch
adds float.h to checked headers in configury, and it adds the missing
HAVE_FLOAT_H macro to SDL_config.h.cmake and SDL_config.h.in.
In SDL_config_macosx.h and SDL_config_windows.h, defined HAVE_FLOAT_H
as 1, where I know that it's true.
Ozkan Sezer
Revision 288 (http://hg.libsdl.org/SDL/rev/2f5a6062db86) excluded the
Watcom compiler from forcing 4 byte structure packing in begin_code.h.
However, it missed updating close_code.h, which now has an unbalanced
#pragma pack(pop) if the compiler is Watcom. The issue seems to have
crawled into SDL2, too.
Carlos
We would like to add a switch (define) that allows us to compile Angle statically with SDL. That is, getting rid of the OpenGL DLL. Usually you need OpenGL to be loaded dynamically as DLL because implementation is provided by the system but no need with Angle.
Only 2 files need modification and it shouldn't affect current behaivor:
include/SDL_egl.h and src/video/SDL_egl.c, as in here
https://github.com/native-toolkit/sdl/pull/10/files
The flag name could be SDL_VIDEO_STATIC_ANGLE (instead of NATIVE_TOOLKIT_STATIC_ANGLE) as discussed here https://github.com/native-toolkit/sdl/pull/10
We have tested this with both Windows and UWP, using NME engine (https://github.com/haxenme/nme).
Releated issue: https://bugzilla.libsdl.org/show_bug.cgi?id=1820
sfalexrog
Android haptic code was not added to CMakeLists.txt, leading to build failures when targeting Android platform.
Attached patch adds Android haptic driver to source sets and adds configuration parameter to SDL_config.h.cmake.
This patch was originally written by Marc Di Luzio for glX and enhanced by
Maximilian Malek for WGL, etc. Thanks to both of you!
Fixes Bugzilla #3643.
Fixes Bugzilla #3735.
Charles Huber
The event timestamp members should be documented to indicate their meaning and units.
Currently the timestamps are populated using SDL_GetTicks() in SDL_PushEvent() in SDL_events.c.
manuel.montezelo
Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015
--------------------------------------------------------
Package: libsdl2-2.0-0
Version: 2.0.0+dfsg1-3
Severity: normal
Tags: patch
I have occasional crashes here caused by the X11 backend of SDL2. It seems to
be caused by the X11_Pending function trying to add a high number (> 1024)
file descriptor to a fd_set before doing a select on it to avoid busy waiting
on X11 events. This causes a buffer overflow because the file descriptor is
larger (or equal) than the limit FD_SETSIZE.
Attached is a possible workaround patch.
Please also keep in mind that fd_set are also used in following files which
may have similar problems.
src/audio/bsd/SDL_bsdaudio.c
src/audio/paudio/SDL_paudio.c
src/audio/qsa/SDL_qsa_audio.c
src/audio/sun/SDL_sunaudio.c
src/joystick/linux/SDL_sysjoystick.c
--------------------------------------------------------
On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote:
> I have occasional crashes here caused by the X11 backend of SDL2. It seems
> to be caused by the X11_Pending function trying to add a high number (>
> 1024) file descriptor to a fd_set before doing a select on it to avoid busy
> waiting on X11 events. This causes a buffer overflow because the file
> descriptor is larger (or equal) than the limit FD_SETSIZE.
I personally experienced this problem while hacking on the python bindings
package for SDL2 [1] (while doing make runtest). But it easier to reproduce in
a smaller, synthetic testcase.
Rainer Deyke
I've written a small patch that adds a small SDL_DuplicateSurface function to SDL. I've written the function as part of a larger (as yet unfinished) patch, but I think this function is useful enough that it merits inclusion in SDL on its own.
Ozkan Sezer
Attached three patches, so these minor os/2 bits get registered mainstream:
1. SDL_syswm.h: add SDL_SYSWM_OS2 to SDL_SYSWM_TYPE enum
2. SDL_platform.h: recognize __EMX__ too as __OS2__
3. begin_code.h: set SDLCALL as _System for OS/2.
Alexey
Seems to be a missing functionality. I want to set an icon from RC file. I cant pass MAKEINTRESOURCE(X) string to SDL_RegisterApp() cause string returned by MAKEINTRESOURCE string is not actually a string and SDL_strlen will crash. Moreover LoadImage seems to be loading wrong icon size. LoadIcon seems to be fine.
Juha Niemim?
On AmigaOS 4 platform with Newlib 'C' library, there is a problem with failing fseeko64. This seemed to be caused by using fopen instead of fopen64.
xyzdragon
Reading https://wiki.libsdl.org/SDL_RenderCopyEx there is no mention what the angle means. Normally in a mathematically environment positive angles translate to counter-clockwise rotations, but in SDL positive angles means clockwise rotation.
Manuel
The attached patch adds support for KMS/DRM context graphics.
It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation.
Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition.
X86 systems use KMS right away in every current GNU/Linux system.
Simple build instructions:
$./autogen.sh
$./configure --enable-video-kmsdrm
$make
Simon Hug
SDL_GL_GetAttribute doesn't check if a video driver has been initialized and will access the SDL_VideoDevice pointer, which is NULL at that point.
I think all of the attributes require an initialized driver, so a simple NULL check should fix it. Patch is attached.
Holger Schemel
Summary: This patch adds support for key events for the "rewind" and "fast forward" media keys on the Amazon Fire TV remote control.
How to reproduce the problem: Run Android build of SDL2 application on the Amazon Fire TV (tested with "stick" version) and log key events.
Expected behaviour: Every key pressed on the Fire TV remote control should result in a corresponding key event (pressed/released).
Observed behaviour: Of the bottom row of buttons on the Fire TV remote control, only the "play/pause" (middle) button generates a key event, while the "rewind" (left) and "fast forward" (right) buttons to not generate any event at all.
The attached patch adds support for these two missing buttons/keys.
Note 1: Some missing definitions were added for the already existing key codes SDL_SCANCODE_APP1 and SDL_SCANCODE_APP2 (to keep up the correct order of enumerations / array positions when adding the two new key codes).
Note 2: Definitions in "scancodes_linux.h" and "scancodes_xfree86.h" (to also add support for these keys on other platforms) were added without testing. However, I was unable to find corresponding definitions for these two media keys for Windows and Mac OS X.
Note 3: I have also updated the (broken) link to the USB usage page standard PDF document (comment in "include/SDL_scancode.h").
Ozkan Sezer
(In reply to Ryan C. Gordon from comment #9)
> I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can
> you verify this works on the latest MinGW?
>
> Thanks,
> --ryan.
This patch is wrong: the structure in question has nothing to do with any
gcc version in use. I suggest reverting this adding a conigury check for
it, instead. Something like the following should do it: (configure needs
regenerating.)
Simon Hug
There's a chance that an audio conversion from many channels to a few can use more than 9 audio filters. SDL_AudioCVT has 10 SDL_AudioFilter pointers of which one has to be the terminating NULL pointer. The SDL code has no checks for this limit. If it overflows there can be stack or heap corruption or a call to 0xa.
Attached patch adds a function that checks for this limit and throws an error if it is reached. Also adds some documentation.
Test parameters that trigger this issue:
AUDIO_U16MSB with 224 channels at 46359 Hz
V
AUDIO_S16MSB with 6 channels at 27463 Hz
The fuzzer program I uploaded in bug 3667 has more of them.
This only affects Wayland and DirectFB, as a Unix system generally has X11
support. Other platforms also have different sizes for the C union in
question, but are likely the only target for that platform, etc.
Apps that might run on Wayland or DirectFB will need to be compiled against
new headers from an official 2.0.6 release, or be prepared to force the x11
target, or not use SDL_GetWindowWMInfo().
Fixes Bugzilla #3428.
Now the compiler might say this:
'SDL_compile_time_assert_mytest' declared as an array with a negative size
instead of
'SDL_dummy_mytest' declared as an array with a negative size
It's easier for Visual Studio users that want this information to turn it on
or live without it, than it is to explain why every debugger that isn't Visual
Studio crashes out here. Eventually SetThreadDescription() will be the thing
everyone uses anyhow.
Fixes Bugzilla #3645.
(and several others).
"In particular, only one VkSurfaceKHR can exist at a time for a given window. Similarly, a native window cannot be used by both a VkSurfaceKHR and EGLSurface simultaneously"
CR: SamL
These don't have to be power-of-2 sizes anymore because of SDL_AudioStream,
and the new resampler, but also, many platforms don't give you power-of-2 DMA
buffer in the first place!
This should remain binary compatible with Windows XP, as we dynamically
load anything we need and fall back to DirectSound/WinMM/XAudio2 if not
available.
This defaults to the internal SDL resampler, since that's the likely default
without a system-wide install of libsamplerate, but those that need more can
tweak this.
Mark Callow
The attached patch does the following for the X11 and Windows platforms, the only ones where SDL attempts to use context_create_es_profile:
- Adds SDL_HINT_OPENGL_ES_DRIVER by which the application can
say to use the OpenGL ES driver & EGL rather than the Open GL
driver. (For bug #2570)
- Adds code to {WIN,X11}_GL_InitExtensions to determine the maximum
OpenGL ES version supported by the OpenGL driver (for bug #3145)
- Modifies the test that determines whether to use the OpenGL
driver or the real OpenGL ES driver to take into account the
hint, the requested and supported ES version and whether ES 1.X
is being requested. (For bug #2570 & bug #3145)
- Enables the testgles2 test for __WINDOWS__ and __LINUX__ and adds
the test to the VisualC projects.
With the fix in place I have run testdraw2, testgl and testgles2 without any issues and have run my own apps that use OpenGL, OpenGL ES 3 and OpenGL ES 1.1.
felix
Compiling even a simple SDL2 'hello world' program with gcc -Wstrict-prototypes (GCC 6.2.1) results in warnings like:
/usr/include/SDL2/SDL_gamecontroller.h:143:1: attention : function declaration isn't a prototype [-Wstrict-prototypes]
extern DECLSPEC int SDLCALL SDL_GameControllerNumMappings();
^~~~~~
It seems there is a missing 'void' between the parentheses.
This currently doesn't affect absolute motion, which would need to be implemented on each windowing system so the cursor matches the reported mouse coordinates.
realitix
SDL2 allows to create widow and to get information through SDL_SysWMinfo.
But it misses something, with Vulkan, you need the HWND and HINSTANCE of the window for Win32 system.
Sadly, SDL2 provides only HWND but not HINSTANCE.
In some context, it can be difficult to get the HINSTANCE, indeed, I'm using pySDL2 (Python) and I can only access properties that SDL2 gives me.
I have to use a dirty trick like that to get the HINSTANCE: (https://raw.githubusercontent.com/bglgwyng/pyVulkan/master/examples/win32misc.py)
Kai Sterker
SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings.
As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.
Albert Casals
On a RaspberryPI, it might become convenient to specify the Dispmanx layer SDL uses.
Currently, it is hardcoded to be 10000 to sit above most applications.
This can be specially useful when integrating other graphical apps and frameworks like OMXplayer, QT5 etc.. in order to have more flexibility on their Z-order.
Sylvain
After a long time, I found out more clearly what was going wrong.
The native libraries should be built with a "APP_PLATFORM" as low as possible.
Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml
So that the application never runs on a lower APP_PLATFORM than it has been built for.
An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10
(If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10.
And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".)
to precise what happened in the initial reported test-case:
Let say the "c" code contains a call to "srand()".
with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()".
with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()".
but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()).
So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10.
That was the issue. The path tried to fix this by in fact always calling srand48().
SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform.
It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions.
Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
Daniel Gibson
Ok, I followed the simple approach of just making SDL_PIXELFORMAT_RGBA32 an alias of SDL_PIXELFORMAT_RGBA8888/SDL_PIXELFORMAT_ABGR8888, depending on endianess. And I did the same for SDL_PIXELFORMAT_ARGB32, .._BGRA, .._ABGR.
SDL_GetPixelFormatName() will of course return SDL_PIXELFORMAT_RGBA8888 (or SDL_PIXELFORMAT_ABGR8888) instead of SDL_PIXELFORMAT_RGBA32, but as long as that's mentioned in the docs it shouldn't be a problem.
Weitian Leung
Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too),
enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
Daniel Gibson
Currently, SDL_CreateRGBSurface() and SDL_CreateRGBSurfaceFrom() take Uint32 masks for RGBA to "describe" the Pixelformat of the surface.
Internally those value are only used to map to one of the SDL_PIXELFORMAT_* enum values that are used for further processing.
I think it would be both handy and more efficient to be able to specify SDL_PIXELFORMAT_* yourself without using SDL_PixelFormatEnumToMasks() to create masks first, so I implemented functions that do that:
SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() which are like the versions without "WithFormat" but instead of taking 4 Uint32s for R/G/B/A masks, they take one for a SDL_PIXELFORMAT_* enum value.
Together with https://bugzilla.libsdl.org/show_bug.cgi?id=2923 creating a SDL_Surface* from RGBA data (e.g. from stb_image) is as easy as
surf = SDL_SDL_CreateRGBSurfaceWithFormat(0, w, h, bppToUse*8, SDL_PIXELFORMAT_RGBA32);
Ryan C. Gordon
We still include iconv.h in SDL_stdinc.h, probably because this header might have referenced the native iconv functions and types directly. Since these are hidden behind a stable ABI now and never just a #define for the system iconv, we shouldn't need this header included from a public SDL header anymore, slowing down external apps compiles and pulling tons of stuff into the namespace.
C.W. Betts
Swift is very strict with types, so much that those of different signedness/size must be cast. Most of the defines are imported as 32-bit signed integers, while the corresponding field in a struct is a 32-bit unsigned integer. Appending a "u" would cause the defined types to be imported as 32-bit unsigned integers.
joe.gsoc16
I recently looked into Unicode support in SDL2 and realized that
SDL_TEXTEDITING doesn't get triggered at all (Japanese IME).
According to others on IRC it works fine on Windows/Mac but not
for me on (arch)Linux.
When compiling SDL with autotools, IBus support is enabled by
default but not so with CMake.
I never used CMake before but got it working and also included
that pkg-config determines flags for dbus (FIXME in CMakeLists).
Simon Hug
The description of the SDL_RenderClear function in the SDL_render.h header says the following:
"This function clears the entire rendering target, ignoring the viewport."
The word "entire" implies that the clipping rectangle set with SDL_RenderSetClipRect also gets ignored. This is left somewhat ambiguous if only the viewport is mentioned. Minor thing, but let's see what the implementations actually do.
The software renderer ignores the clipping rectangle when clearing. It even has a comment on this: /* By definition the clear ignores the clip rect */
Most other render drivers (opengl, opengles, opengles2, direct3d, and psp [I assume. Can't test it.]) use the scissor test for the ClipRect and don't disable it when clearing. Clearing will only happen within the clipping rectangle for these drivers.
An exception is direct3d11 which uses a clear function that ignores the scissor test.
Simon Hug
The current SDL_SaveBMP_RW function that saves surfaces to a BMP uses an old bitmap header which doesn't officially support alpha channels. Applications just ignore the byte where the alpha is stored. This can easily be extended by using a newer header version and setting the alpha mask.
The attached patch has these changes:
- Extending the description of the function in the SDL_surface.h header with the supported formats.
- Refining when surfaces get stored to a 32-bit BMP. (Must have bit depth of 8 or higher and must have an alpha mask or colorkey.)
- Fixing a small bug that saves 24-bit BGR surfaces with a colorkey in a 24-bit BMP.
- Adding code that switches to the bitmap header version 4 if the surface has an alpha mask or colorkey. (I chose version 4 because Microsoft didn't lose its documentation behind a file cabinet like they did with version 3.)
- Adding a hint that can disable the use of the version 4 header. This is for people that need the legacy header or like the old behavior better. (I'm not sure about the hint name, though. May need changing if there are any rules to that.)
Kai Sterker
There are already patches available from mingw64 that fix the issue
https://github.com/Alexpux/MINGW-packages/tree/master/mingw-w64-SDL2
With those applied, I could compile SDL2 without problems. But of course, it would be preferable if SDL built cleanly from source.
The Apple TV remote is currently exposed as a joystick with its touch surface treated as two axes. Key presses are also generated when its buttons and touch surface are used.
A new hint has been added to help deal with deciding whether to background the app when the remote's menu button is pressed: SDL_HINT_APPLE_TV_CONTROLLER_UI_EVENTS.
This is for corner cases where a multi-window app is activated and wants to
make a decision about where focus should go.
This patch came from Unreal Engine 4's fork of SDL, compliments of Epic Games.
Sylvain
When using API 21 and running on an old device (android < 5.0 ?) some function are missing.
functions are (at least) : signal, sigemptyset, atof, stpcpy (strcat and strcpy), srand, rand.
Very few modifications on SDL to get this working :
on SDL
======
Undefine android configuration :
HAVE_SIGNAL
HAVE_SIGACTION
HAVE_ATOF
In "SDL_systrhead.c", comment out the few block of lines with "sigemptyset".
Android.mk:
remove the compilation of "test" directory because it contains a few rand/srand calls
Also, there are more discussions about this in internet :
https://groups.google.com/forum/#!topic/android-ndk/RjO9WmG9pfEhttp://stackoverflow.com/questions/25475055/android-ndk-load-library-cannot-locate-srand
This was the only thing that made SDL_config.h generate differently between
32 and 64-bit versions of Linux, so instead we force a function cast in our
X11 code to match our dynamic loader version, which removes the compile error
on some machines that prompted this test in the first place.
Xlib never wrote to this data, so if you're on an older Xlib where this param
wasn't const, your data should still be intact when we force the caller to
think it was actually const after all.
Fixes Bugzilla #1893.
Otherwise, SDL_PIXELFORMAT_BGR24 is reported as having alpha, because
its SDL_ARRAYORDER_BGR pixel order uses the same integer value as
SDL_PACKEDORDER_RGBA, since we weren't checking the pixel type to
differentiate.
Fixes Bugzilla #2977.
This lets windows know when they are dropping a mouse event because their
hit test reported something other than SDL_HITTEST_NORMAL. It lets them know
exactly where in the event queue this happened.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
This is currently implemented for X11, Cocoa, Windows, and DirectFB.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
This allows an app to know when a set of drops are coming in a grouping of
some sort (for example, a user selected multiple files and dropped them all
on the window with a single drag), and when that set is complete.
This also adds a window ID to the drop events, so the app can determine to
which window a given drop was delivered. For application-level drops (for
example, you launched an app by dropping a file on its icon), the window ID
will be zero.
Specifically: always on top, skip taskbar, tooltip, utility, and popup menu.
This is currently only implemented for X11.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
"UWP" appears to be Microsoft's new name for WinRT/Windows-Store APIs.
This set of changes updates SDL's WinRT backends to support the Win10 flavor
of WinRT. It has been tested on Win10 on a desktop. In theory, it should
also support Win10 on other devices (phone, Xbox One, etc.), however further
patches may be necessary.
This adds:
- a set of MSVC 2015 project files, for use in creating UWP apps
- modifications to various pieces of SDL, in order to compile via MSVC 2015 +
the Win10 API set
- enables SDL_Window resizing and programmatic-fullscreen toggling, when using
the WinRT backend
- WinRT README updates
WinRT 8.0 (Phone and non-Phone) didn't offer an API to set an already-created
thread's priority. WinRT 8.1 offered this API, along with several other
Win32 thread functions that were previously unavailable (in WinRT).
This change makes WinRT 8.1+ platforms use SDL's Win32 backend.
This change-set fixes a lot of windowing related bugs, especially with
regards to Windows 8.x apps running on Windows 10 (which was the driver for
this work). The primary fixes include:
* listed display modes were wrong, especially when launching apps into a
non-fullscreen space
* reported window flags were often wrong, especially on Windows 10
* fullscreen/windowed mode switches weren't failing (they are not
programmatically possible in Win 8.x apps).
Note that extra steps must be taken when using glReadPixels to read the contents of the main OpenGL ES framebuffer on iOS, if multisampling is used. See the OpenGL ES section of README-ios.md for details.
There are platforms it isn't implemented on (and currently can't be
implemented on!), and there's currently no way for an app to know this.
This shouldn't break ABI on apps that moved to a revision between 2.0.3 and
2.0.4.
The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly
uninitialized data structure if loading the library first failed. A later try to
use EGL then skipped initialization and assumed it was previously successful
because the data structure now already existed. This led to at least one crash
in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was
dereferenced to make a call to eglBindAPI().
Clarify that grabbing the mouse only works with one window at a time; this was
always true at the system level, though SDL could previously get confused
by multiple simultaneous grabs, so now we explicitly break any existing
grab before starting a new one and document it as such.
Also track the window that is currently grabbed, and provide an API to query
for that window. This makes it easy to automate mouse ungrabbing at
breakpoints with gdb7's scripting, since the scripts can now know which window
to ungrab.
In 2.1, we should probably change this API to SDL_GrabInput(win) and
SDL_UngrabInput(void), or something.
This extension allows the user to specify whether a full flush is performed when making a context not current.
The only way to set this currently is at context creation, so this patch provides that functionality.
Defualt behaviour is set at FLUSH, as per the spec.
This patch does not contain the changes to WGL, appleGL or other platforms as I do not have access to GL 4.5 hardware on those platforms.
Full details on the use of KHR_context_flush_control can be found here:
https://www.opengl.org/registry/specs/KHR/context_flush_control.txt
This fills in the core pieces and fully implements it for Mac OS X.
Most other platforms, at the moment, will report a disconnected device if
it fails to write audio, but don't notice if the system's device list changed
at all.
64-bit Linux uses a "long" instead of "long long" for 64-bit ints.
Added a special-case this so SDL_PRI?64 doesn't trigger compiler warnings
when used with SDL's 64-bit datatypes on 64-bit Linux.
Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture.
More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
- Added new custom launch screen code. It uses the launch screen nib when available on iOS 8+, the launch images dictionary if the launch screen nib isn't available, and the old standard image names if the launch image dictionary isn't in the plist.
The launch screen is now hidden during the first call to SDL_PumpEvents rather than SDL_CreateWindow so apps can have the launch screen still visible if they do time-consuming loading after creating their window. It also fades out in roughly the same way as the system launch screen behavior.
It can be disabled by setting the SDL_IPHONE_LAUNCHSCREEN define in SDL_config_iphoneos.h to 0.
- A blank UIView is now created and displayed when the window is first created. The old behavior was to defer creating any view until SDL_GL_CreateContext, which prevented rotation, touch events, and other windowing-related things from working until then. This also makes it easier to use SDL_GetWindowWMInfo after creating a window.
- Moved the keyboard and animation callback code from SDL's UIView subclasses to its UIViewController subclass, which lets them work properly in all cases when a SDL window is valid, even before SDL_GL_CreateContext is called and after SDL_GL_DeleteContext is called.
- SDL_GL_CreateContext, SDL_GL_SwapWindow, SDL_GL_MakeCurrent, and SDL_GL_DeleteContext are more robust.
- Fixed some edge cases where SDL windows weren't rotating properly or their reported sizes were out of sync with their actual sizes.
- Removed all calls to [UIApplication setStatusBarOrientation:]. It doesn't seem to work as expected in all cases in recent iOS versions.
- Some code style cleanup.
Jonas Kulla
The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c.
I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
This is a little macro magic to use malloc() directly instead of SDL_malloc(),
etc, so static analysis tests that know about the C runtime can function
properly, and understand that we are dealing with heap allocations, etc.
This changed our static analysis report from 5 outstanding bugs to 30.
5x as many bugs were hidden by SDL_malloc() not being recognized as malloc()
by the static analyzer!
SDL_WinRTRunApp() is used on WinRT to launch a main(int, char **)-style
function. It has optional, and experimental support for launching content
inside a XAML control, backed by a main() function running on a separate thread.
This is provided via it's 2nd parameter, which can be a pointer to a XAML
control. (If NULL, XAML support will not be used.)
This change renames the experimental feature's parameter (to SDL_WinRTRunApp())
as "reserved", until such time as the functionality is ready for use. It will
likely be renamed again in the future, when running SDL on top of a XAML control
via a separate thread, becomes reasonably usable.
With this commit, you can compile SDL2 with Emscripten
( http://emscripten.org/ ), and make your SDL-based C/C++ program
into a web app.
This port was due to the efforts of several people, including: Charlie Birks,
Sathyanarayanan Gunasekaran, Jukka Jyl?nki, Alon Zakai, Edward Rudd,
Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)
The expected use case is for games that are designed with multiple aspect ratios already in mind and leave optional margins on the edges of the game which won't hurt if they are cut off.
An example use case is a game is designed for wide-screen/16:9, but then wants to deploy on an iPad which is 4:3. Normally, SDL will letterbox, which will shrink things and result in wasted space. But the designer already thought about 4:3 and designed the edges of the game so they could be cut off without any functional loss. So rather than wasting space with letterboxing, "overscan" mode will zoom the rendering to fill up the entire screen. Parts on the edges will be drawn offscreen, but since the game was already designed with this in mind, it is fine. The end result is the iPad (4:3) experience is much better since it feels like a game designed for that screen aspect ratio.
This patch introduces a new SDL_hint: SDL_HINT_RENDER_LOGICAL_SIZE_MODE.
Valid values are "letterbox" or "0" for letterboxing and "overscan" or "1" for overscan.
The default mode is letterbox to preserve existing behavior.
// Example usage:
SDL_SetHint(SDL_HINT_RENDER_LOGICAL_SIZE_MODE, "overscan");
SDL_RenderSetLogicalSize(renderer, SCREEN_WIDTH, SCREEN_HEIGHT);
Elias Vanderstuyft
"Horizontal" is not very precise, use "Positive phase" instead.
"Positive" because it's actually waveform(2*pi*t + phase) instead of waveform(2*pi*t - phase).
Elias Vanderstuyft
It's not obvious from the general "haptic direction" description what the SDL direction actually means in terms of force magnitude sign,
currently its meaning is only reflected by the example.
This change does a few things, all with regards to the WinRT implementation of
SDL_GetPrefPath():
1. it fixes a bug whereby SDL_GetPrefPath() did not create the directory it
returned. On other SDL platforms, SDL_GetPrefPath() will create separate
directories for its 'org' and 'app' folders. Without this, attempts to create
files in the pref-path would fail, unless those directories were first created
by the app, or by some other library the app used. This change makes sure
that these directories get created, before SDL_GetPrefPath() returns to its
caller(s).
2. it defaults to having SDL_GetPrefPath() return a WinRT 'Local' folder
on all platforms. Previously, for Windows Store apps, it would have used a
different, 'Roaming' folder. Files in Roaming folders can be automatically,
and synchronized across multiple devices by Windows. This synchronization can
happen while the app runs, with new files being copied into a running app's
pref-path. Unless an app is specifically designed to handle this scenario,
there is a chance that save-data could be overwritten in unwanted or
unexpected ways.
The default is now to use a Local folder, which does not get synchronized, and
which is arguably a bit safer to use. Apps that wish to use Roaming folders
can do so by setting SDL_HINT_WINRT_PREF_PATH_ROOT to "roaming", however it
is recommended that one first read Microsoft's documentation for Roaming
files, a link to which is provided in README-winrt.md.
To preserve older pref-path selection behavior (found in SDL 2.0.3, as well as
many pre-2.0.4 versions of SDL from hg.libsdl.org), which uses a Roaming path
in Windows Store apps, and a Local path in Windows Phone, set
SDL_HINT_WINRT_PREF_PATH_ROOT to "old".
Please note that Roaming paths are not supported on Windows Phone 8.0, due to
limitations in the OS itself. Attempts to use this will fail.
(Windows Phone 8.1 does not have this limitation, however.)
3. It makes SDL_GetPrefPath(), when on Windows Phone 8.0, and when
SDL_HINT_WINRT_PREF_PATH_ROOT is set to "roaming", return NULL, rather than
silently defaulting to a Local path (then switching to a Roaming path if and
when the user upgraded to Windows Phone 8.1).
WinRT apps can set a default, preferred orientation via a .appxmanifest file.
SDL was overriding this on app startup, and making the app use all possible
orientations (landscape and portrait).
Thanks to Eric Wing for the heads up on this!
SDL_HINT_WINRT_PREF_PATH_ROOT allows WinRT apps to alter the path that
SDL_GetPrefPath() returns. Setting it to "local" uses the app's
OS-defined Local folder, setting it to "roaming" uses the app's OS-defined
Roaming folder.
Roaming folder support is not available in Windows Phone 8.0. Attempts to
make SDL_GetPrefPath() return a Roaming folder on this OS will be ignored.
Various bits of documentation on this were added to SDL_hints.h, and to
README-winrt.md
The "future-dev" branch of MSOpenTech's ANGLE/WinRT repository (at
https://github.com/msopentech/angle) includes support for Windows Phone 8.1.
This change allows it to be used in conjunction with SDL's OpenGL functions.
A negative periodic magnitude doesn't exist in Windows' and MacOS' FF APIs
The periodic magnitude parameter of the SDL Haptic API is based on the Linux
FF API, so it means they are not directly compatible:
'dwMagnitude' is a 'DWORD', which is unsigned.
Fixes Bugzilla #2701.
since the window system doesn't do it for us like other platforms.
This prevents sticky keys and missed keys when going in and out
of focus, for example Alt would appear to stick if switching away
from an SDL app with Alt-Tab and had to be pressed again.
CR: Sam
skaller
using gcc 4.2 (the default) on Mac OSX 10.6.8
CC build/SDL_dynapi.lo
In file included from /Users/johnskaller/SDL/src/dynapi/SDL_dynapi.c:31:
include/SDL_syswm.h:211:39: error: missing binary operator before token "("
The fault appears to be here:
#if defined(__OBJC__) && __has_feature(objc_arc)
that the __has_feature macro is not supported by gcc 4.2.
The code works fine with my clang 3.3svn.
Tobias Himmer
this patch adds a check to the CMake build script to detect whether the VideoCore API is available.
If it is found, it enables SDL_VIDEO_DRIVER_RPI and will also add the needed include/library directory flags to CMAKE_C_FLAGS so the subsequent check for GLES succeeds in picking up the headers.
Seems to work fine on Raspbian.
There was a misconception that Linux's saturation and deadband parameters -
on which the corresponding SDL parameters were based - use only half of the
possible range.
Thanks, Elias!
Partially fixes Bugzilla #2686.
1) Moves all READMEs to docs/
2) Renames them to *.md, adds some Markdown with the idea to add a lot more
3) Moves the doxyfile config to doc/ and makes it parse the headers at ../include as well as the md files in docs.
4) Skips SDL_opengl*.h headers from the docs
5) Minor fixes to doxyfile
binarycrusader
Since changeset 358696c354a8, SDL 2.0 has been broken on Solaris when compiling with the Solaris Studio compiler (which uses the pthread implementation of SDL_AtomicLock).
Notably, it gets stuck at the MemoryBarrierRelease in SDL_GetErrBuf:
6585 # 218
6586 if (!tls_errbuf && !tls_being_created) {
6587 SDL_AtomicLock_REAL ( & tls_lock );
6588 if (!tls_errbuf) {
6589 SDL_TLSID slot;
6590 tls_being_created = SDL_TRUE;
6591 slot = SDL_TLSCreate_REAL ( );
6592 tls_being_created = SDL_FALSE;
6593 { SDL_SpinLock _tmp = 0 ; SDL_AtomicLock_REAL ( & _tmp ) ; SDL_AtomicUnlock_REAL ( & _tmp ) ; };
^^^ loops forever above
6594 tls_errbuf = slot;
6595 }
6596 SDL_AtomicUnlock_REAL ( & tls_lock );
6597 }
Running: testthread
(process id 28926)
^Cdbx: warning: Interrupt ignored but forwarded to child.
signal INT (Interrupt) in __nanosleep at 0xfe52a875
0xfe52a875: __nanosleep+0x0015: jae __nanosleep+0x23 [ 0xfe52a883, .+0xe ]
Current function is SDL_Delay_REAL
204 was_error = nanosleep(&tv, &elapsed);
(dbx) where
[1] __nanosleep(0xfeffe848, 0xfeffe850, 0xfe75a5ac, 0xfe5169d8), at 0xfe52a875
[2] nanosleep(0xfeffe848, 0xfeffe850), at 0xfe516a3b
=>[3] SDL_Delay_REAL(ms = 0), line 204 in "SDL_systimer.c"
[4] SDL_AtomicLock_REAL(lock = 0xfeffe88c), line 104 in "SDL_spinlock.c"
[5] SDL_GetErrBuf(), line 225 in "SDL_thread.c"
[6] SDL_ClearError_REAL(), line 216 in "SDL_error.c"
[7] SDL_InitSubSystem_REAL(flags = 0), line 116 in "SDL.c"
[8] SDL_Init_REAL(flags = 0), line 244 in "SDL.c"
[9] SDL_Init(a = 0), line 89 in "SDL_dynapi_procs.h"
[10] main(argc = 1, argv = 0xfeffe948), line 65 in "testthread.c"
As far as I can tell, this is because pthread_spin_trylock() always returns EBUSY for this particular lock; since it works in other places, I'm suspicious.
Different Solaris Studio compiler versions seem to make no difference.
I've verified this is broken on Linux as well if SDL_spinlock.c is modified to use the pthread implementation.
This appears to be because pthread_spin_init() and pthread_spin_destroy() are not used with the locks as required.
Notes:
- Support for the 'Guide' button does not seem to be possible, as
XInputGetStateEx is not available on WinRT.
- Haptic support appears to be working on WinRT now!
- SDL/WinRT does not allow calls to LoadLibrary or LoadLibraryEx. The calls
to those were removed by this change, but only when compiling for WinRT.
Non-WinRT Windows will continue to detect and load XInput via LoadLibrary and
GetProcAddress calls.
If the EGL extension EGL_KHR_create_context is available, we can use it to
set the core/compatability profile and the minimum OpenGL version.
Use this if it is available to get the context requested by the GL attributes.
Alex Szpakowski
SDL's code for exposing the accelerometer as a joystick on iOS currently uses UIAccelerometer, which was superseded by the CoreMotion framework and deprecated since iOS 5.
The UIAccelerometer code still works (for now), but it also throws deprecation warnings whenever SDL is built for iOS, since SDL's deployment target is no longer below iOS 5.
I've created a patch which replaces the old UIAccelerometer code with a replacement based on the CoreMotion framework. It has identical functionality (to SDL users), however iOS apps are now required to link to the CoreMotion framework when using SDL.
This adds support for all XInput devices, exposed through the SDL joystick API.
The button and axis reporting for XInput devices has been changed to match DirectInput and other platforms.
The game controller xinput mapping has been updated so this change is seamless.
There is a new hint, SDL_HINT_XINPUT_USE_OLD_JOYSTICK_MAPPING, for any applications that have hardcoded the old xinput button and axis set. This hint will be removed in SDL 2.1.
Alex Szpakowski
Now that SDL for iOS requires at least iOS 5.1 at runtime, there are several old codepaths in the UIKit backend which can be removed. I've attached a patch which does so.
Author: Sam Clegg <sbc@chromium.org>
Date: Fri Jun 20 12:52:11 2014
Fix win32 build which was failing due to missing PRIs64.
This change adds definitions for the C99 PRIs16 and PRIu64
which are missing from <stdint.h> on at last win32 and
possibly other platforms.
These already existed in testgesture.c so I removed them
from there also.
J?rgen Tjern?
If you #define NO_SDL_GLEXT before including SDL_opengl.h, it still includes the platform-provided glext.h. The comments indicate that this define is intended to be used when you provide your own glext.h (quote from SDL_opengl.h: "Define this if you have your own version of glext.h and want to disable the version included in SDL_opengl.h.")
This is a problem because glext.h depends on the contents of gl.h, and it's practical to let SDL_opengl.h pick the right #include for gl.h for our platform.
An existing hint lets apps that don't need the timer resolution changed avoid
this, to save battery, etc, but this fixes several problems in timing, audio
callbacks not firing fast enough, etc.
Fixes Bugzilla #2944.
There were several good arguments for this: it's how Windows works with
WM_NCHITTEST, SDL doesn't need to manage a list of rects, it allows more
control over the regions (how do you use rects to cleanly surround a circular
button?), the callback can be more optimized than a iterating a list of
rects, and you don't have to send an updated list of rects whenever the
window resizes or layout changes.
SDL/WinRT did have support for OpenGL ES 2 via an older version of ANGLE/WinRT,
however its API changed a few months ago, and SDL/WinRT would crash when trying
to use it. It would also occasionally crash when using the older version.
This changeset should make SDL/WinRT work with the latest version, as
available via MS Open Tech's git repository of it at
https://github.com/msopentech/angle
Older versions of ANGLE/WinRT (from either https://github.com/stammen/angleproject
or https://bitbucket.org/DavidLudwig/angleproject) will need to be updated to
MS Open Tech's latest version.
Fix to allow using SDL when compiling with v110_xp or v120_xp -- compiling with VS2012/VS2013 with the XP targeting option.
In order to ensure that we can target Windows XP we compile with the v120_xp toolset instead of v120. This means that we use an earlier SDK version and it means that winapifamily.h is not available. Compiling for this old SDK can be detected using the _USING_V110_SDK71_ define which is set through the %(PreprocessorDefinitions) option.
The D3D11 renderer is now slightly faster than D3D9 on my Windows 8 machine (testsprite2 runs at 3400 FPS vs 3100 FPS)
This will need tweaking to fix the Windows RT build.
- SDL_WINDOW_FULLSCREEN works as always (change resolution, lock to window).
- SDL_WINDOW_FULLSCREEN_DESKTOP now puts the window in its own Space, and
hides the menu bar, but you can slide between Spaces and Command-Tab between
apps without the window minimizing, etc.
- SDL_WINDOW_RESIZABLE windows will get the new 10.7+ "toggle fullscreen"
window decoration and menubar item. As far as the app is concerned, this is
no different than resizing a window, but it gives the end-user more power.
- The hint for putting fullscreen windows into the Spaces system is gone,
since Spaces can't enforce the requested resolution. It's a perfect match
for FULLSCREEN_DESKTOP, though, so this is all automated now.
Pressing the hardware back button on a Windows Phone 8 device will now cause SDL to emit a pair of key-down and key-up events, with the SDL scancode, SDL_SCANCODE_AC_BACK.
By default, if WinRT's native back-button-press events are not explicitly marked as 'handled', then Windows Phone will terminate the app. More details on Microsoft's reasoning behind this can be found on MSDN, at http://msdn.microsoft.com/en-us/library/windowsphone/develop/jj247550(v=vs.105).aspx
To mark back-button-press events as 'handled', set SDL_HINT_WINRT_HANDLE_BACK_BUTTON to 1. Setting it to anything else will cause these events to not be marked as 'handled'.
Due to limitations in Windows Phone's APIs, SDL will emit a virtual key-up event immediately after the back button's key-down event is registered. Unfortunately, Windows Phone 8 only allows one to register for back-button-press events, and not back-button-release events.
This change is only relevant for Windows 8, 8.1, and RT apps, and only for those that are network-enabled. Such apps must feature a link to a privacy policy, which must be displayed via the Windows Settings charm. This is needed to pass Windows Store app-certification.
Using SDL_SetHint, along with SDL_HINT_WINRT_PRIVACY_POLICY_URL and optionally SDL_HINT_WINRT_PRIVACY_POLICY_LABEL, will cause SDL/WinRT to create a link inside the Windows Settings charm, as invoked from within an SDL-based app.
Network-enabled Windows Phone apps do not need to set this hint, and should provide some sort of in-app means to display their privacy policy. Microsoft does not appear to provide an OS-integrated means for displaying such on Windows Phone.
Alex Szpakowski
On my Mac OS X system (10.9.1), the SDL_MOUSEWHEEL event reports negative X values when my trackpad scrolls to the right, and positive X values when my trackpad scrolls to the left. This is backwards from what I'd expect, and I don't think it matches the Windows wheel events.
The vertical scroll values are what I'd expect though, and are consistent what gets reported on Windows (positive Y for scrolling up, negative Y for scrolling down.)
This is with "scroll direction: natural" disabled in the OS X trackpad settings (i.e. my scroll direction in non-SDL OS X programs matches what happens in Windows and Linux.)
I also tested with the horizontal scroll on a real mouse (Logitech G500 without custom drivers), and the horizontal scroll values in SDL are still flipped.
I "solved" the issue for myself by changing this line in the Cocoa_HandleMouseWheel function:
float x = [event deltaX];
to this:
float x = -[event deltaX];
I believe it should work fine with that change - I found something similar in another codebase while looking online for my issue - but I haven't tested on anything below Mac OS 10.8.
This lets it know, for example, that when you do this...
SDL_assert(ptr != NULL);
...that (ptr) is definitely not NULL at this point in the program, for the
sake of static analysis. While a buggy program could definitely trigger this
assertion, Clang assumes your assertion check is covering it and won't
report possible NULL dereferences after this point.
Since SDL_assert might continue if the user clicks "ignore", without this
change Clang would notice you checked for NULL (meaning that NULL is a real
possibility here) and still wrote code outside of that test branch that
dereferences the pointer, and thus would always trigger false positives.
Static analysis is fun!
Haneef Mubarak
AVX is the successor to SSE* and is fairly widely available. As such, it really ought to be detectable.
This functionality ought to be trivial to implement, and not having it means being forced to write an ugly workaround to check for AVX (so that normal SSE can be used if AVX is not available).
Here is an example on detecting AVX from SO (it actually shows ways to cehck for all of teh fancy instructions):
http://stackoverflow.com/questions/6121792/how-to-check-if-a-cpu-supports-the-sse3-instruction-set
The reasoning behind this change is that source2 in -tools mode has a single OpenGL context that is used with multiple different windows. Some of those windows are created outside the engine (i.e. with Qt) and therefore we need to use SDL_CreateWindowFrom() to get an SDL_Window for those. The requirement for sharing an OpenGL context across multiple different windows is that each window has the same pixel format. To facilitate this, I now set SDL_HINT_VIDEO_WINDOW_SHARE_PIXEL_FORMAT for the main window before calling SDL_CreateWindowFrom(). When I do this, SDL_CreateWindowFrom() will:
1. Set the pixel format of the returned window to the same pixel format as this SDL_Window passed in with the hint
2. The flag SDL_WINDOW_OPENGL will be set on the new window so it can be used for OpenGL rendering.
I only currently implemented this for Win32/WGL so implementing it for other platforms (i.e. X11) remains a TODO.
CR: SamL
Some pseudocode that shows how this is used in Source2:
HWND hExternalHwnd; // HWND that was established outside of SDL
// Create main window (happens inside platwindow.cpp)
SDL_Window *mainWindow = SDL_CreateWindow( , SDL_WINDOW_OPENGL .. );
// Create GL context, happens inside rendersystemgl
SDL_GLContext onlyContext = SDL_GL_CreateContext( mainWindow );
// Now I need to create another window from hEternalHwnd for my swap chain that will have the same pixel format as mainWindow, so set the hint
SDL_SetHint( SDL_HINT_VIDEO_WINDOW_SHARE_PIXEL_FORMAT, CFmtStr( %p, mainWindow) );
// Create the secondary window. This returned window will have SDL_WINDOW_OPENGL set and share a pixel format with mainWindow from the hint
SDL_Window *secondaryWindow = SDL_CreateWindowFrom( hExternalHwnd );
// To render to the main window:
SDL_GL_MakeCurrent( mainWindow, onlyContext );
// Do some rendering to main window
// To render to the secondary window:
SDL_GLMakeCurrent( secondaryWindow, onlyContext );
// Do some rendering to secondary window
SDL 2.x recently accepted patches to enable OpenGL ES 2 support via Google's ANGLE library. The thought is to try to eventually merge SDL/WinRT's OpenGL code with SDL-official's.
To enable this, set the environment variable SDL_MOUSE_RELATIVE_MODE_WARP to "1"
When mouse relative mode is disabled, put the cursor back where the application expects it to be, instead of where it was when relative mode was enabled.
Based on the original port to Wayland by: Joel Teichroeb, Benjamin Franzke, Scott Moreau, et al.
Additional changes in this commit, done by me:
* Wayland uses the common EGL framework
* EGL can now create a desktop OpenGL context
* testgl2 loads GL functions dynamically, no need to link to libGL anymore
* Assorted fixes to the Wayland backend
Tested on the Weston Compositor (v1.0.5) that ships with Ubuntu 13.10,
running Weston under X. Tests ran: testrendercopyex (all backends), testgl2, testgles2,testintersections
SDL_GameControllerAddMappingsFromFile is now a convenience macro.
controllermap can now skip bindings by pressing space or clicking/touching the
screen.
Haiku uses most of the standard pthread API, with a few #ifdefs where we
still need to fallback onto the old BeOS APIs.
BeOS, however, does not support pthreads (or maybe doesn't support it well),
so I'm unplugging support for the platform with this changeset. Be Inc went
out of business in 2001.
This bumps the build SDK level to 12 (up from 10). Runtime requirements remain
the same (at API level < 12 joystick support is disabled).
Also enables building SDL for armv7 and x86.
A port of the ANGLE library (OpenGL ES 2.0 for Direct3D) to WinRT, via https://github.com/stammen/angleproject, is used as a base.
To enable, clone 'angleproject' into the directory one above where SDL/WinRT is, open the file SDL/include/SDL_config_winrt.h, and uncomment the #defines that begin with 'SDL_VIDEO_OPENGL'. From there, apps can create an OpenGL capable SDL_Window via the flag, SDL_WINDOW_OPENGL, and an OpenGL ES 2 context via SDL_GL_CreateContext. The Direct3D 11.1 renderer cannot be used alongside SDL_WINDOW_OPENGL. Only Windows 8/8.1 is supported for now. Shaders may need to be precompiled, in some (all?) cases.
To enable the Debug Layer, set the hint, SDL_HINT_RENDER_DIRECT3D11_DEBUG to '1'.
The Debug Layer will be turned off by default, both in Release and Debug builds (of SDL).
J?nis R?cis
Reopening as compilation with ANSI C throws lots of unnecessary warnings, both using MinGW and using Linux GCC. (BTW, what happened? MinGW is broken to all hell. sdl2-config does not even link SDLMain anymore?)
I think this may have been lost somewhere, so again: GCC supports inlining via __inline__ in all known versions of GCC, regardless of the C standard in use. Please don't assume that __STRICT_ANSI__ implies no inlining support.
Andreas Ertelt
The problem in question is caused by changeset 7771 (http://hg.libsdl.org/SDL/rev/5486e579872e / https://bugzilla.libsdl.org/show_bug.cgi?id=2121)
The redefinition of __inline__ (introduced by the addition of begin_code.h:128's "|| __STRICT_ANSI__") results in mingw's gcc throwing multiple
warning: always_inline function might not be inlinable [-Wattributes]
as well as a whole bunch of redefinitions of mingw internals which break linking of projects including the SDL2 headers.
norfanin
Fixes the version check for some functions that are only present with the MSVC 2013 CRT libraries.
I did my testing wrong and failed to see that 2012 doesn't have these functions. Microsoft implemented them in their upcoming 2013 version, though. The attached patch changes it to the check for the next version.
I also removed the HAVE_ITOA because that would require linking with oldnames.lib and it's easier to just let the SDL implementation take over.
Sam Lantinga
Brandon Schaefer
Brandon Schaefer
Ryan C. Gordon
Alex Szpakowski
Ozkan Sezer
Philipp Wiesemann
Thomas Perl
Ethan Lee
Eric Wing
David Ludwig
andrewb
Alfred Reynolds
Joseba Garc?a Etxebarria
Marc Di Luzio
Edward Rudd
Andreas Schiffler
J?rgen P. Tjern?
mastermind
Pierre-Loup A. Griffais
Alex Baines
Gabriel Jacobo
Shawn Walker
Knut Andre Tidemann
Sam Clegg
Ionut Leonte
stopiccot
J?rgen P. Tjern?