encounter
/
dawn-cmake
mirror of https://github.com/encounter/dawn-cmake.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
dawn-cmake/test/vk-gl-cts/graphicsfuzz/spv-double-branch-to-same-b.../1.spvasm.expected.spvasm

647 lines
24 KiB
Plaintext
Raw Normal View History

Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
; SPIR-V
; Version: 1.3
; Generator: Google Tint Compiler; 0
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
; Bound: 416
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
; Schema: 0
OpCapability Shader
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%176 = OpExtInstImport "GLSL.std.450"
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpMemoryModel Logical GLSL450
OpEntryPoint Fragment %main "main" %tint_symbol %tint_symbol_2
OpExecutionMode %main OriginUpperLeft
OpName %data "data"
OpName %temp "temp"
OpName %buf0 "buf0"
OpMemberName %buf0 0 "injectionSwitch"
OpName %x_28 "x_28"
OpName %gl_FragCoord "gl_FragCoord"
OpName %x_GLF_color "x_GLF_color"
OpName %buf1 "buf1"
OpMemberName %buf1 0 "resolution"
OpName %x_32 "x_32"
OpName %tint_symbol "tint_symbol"
OpName %tint_symbol_2 "tint_symbol_2"
OpName %merge_i1_i1_i1_ "merge_i1_i1_i1_"
OpName %from "from"
OpName %mid "mid"
OpName %to "to"
OpName %k "k"
OpName %i "i"
OpName %j "j"
OpName %i_1 "i_1"
OpName %mergeSort_ "mergeSort_"
OpName %low "low"
OpName %high "high"
OpName %m "m"
OpName %i_2 "i_2"
OpName %from_1 "from_1"
OpName %mid_1 "mid_1"
OpName %to_1 "to_1"
OpName %param "param"
OpName %param_1 "param_1"
OpName %param_2 "param_2"
OpName %main_1 "main_1"
OpName %i_3 "i_3"
OpName %j_1 "j_1"
OpName %grey "grey"
OpName %main_out "main_out"
OpMemberName %main_out 0 "x_GLF_color_1"
OpName %tint_symbol_3 "tint_symbol_3"
OpName %tint_symbol_1 "tint_symbol_1"
OpName %main "main"
OpDecorate %_arr_int_uint_10 ArrayStride 4
OpDecorate %buf0 Block
OpMemberDecorate %buf0 0 Offset 0
OpDecorate %x_28 NonWritable
OpDecorate %x_28 DescriptorSet 0
OpDecorate %x_28 Binding 0
OpDecorate %buf1 Block
OpMemberDecorate %buf1 0 Offset 0
OpDecorate %x_32 NonWritable
OpDecorate %x_32 DescriptorSet 0
OpDecorate %x_32 Binding 1
OpDecorate %tint_symbol BuiltIn FragCoord
OpDecorate %tint_symbol_2 Location 0
OpMemberDecorate %main_out 0 Offset 0
%int = OpTypeInt 32 1
%uint = OpTypeInt 32 0
%uint_10 = OpConstant %uint 10
%_arr_int_uint_10 = OpTypeArray %int %uint_10
%_ptr_Private__arr_int_uint_10 = OpTypePointer Private %_arr_int_uint_10
%7 = OpConstantNull %_arr_int_uint_10
%data = OpVariable %_ptr_Private__arr_int_uint_10 Private %7
%temp = OpVariable %_ptr_Private__arr_int_uint_10 Private %7
%float = OpTypeFloat 32
%v2float = OpTypeVector %float 2
%buf0 = OpTypeStruct %v2float
%_ptr_Uniform_buf0 = OpTypePointer Uniform %buf0
%x_28 = OpVariable %_ptr_Uniform_buf0 Uniform
%v4float = OpTypeVector %float 4
%_ptr_Private_v4float = OpTypePointer Private %v4float
%17 = OpConstantNull %v4float
%gl_FragCoord = OpVariable %_ptr_Private_v4float Private %17
%x_GLF_color = OpVariable %_ptr_Private_v4float Private %17
%buf1 = OpTypeStruct %v2float
%_ptr_Uniform_buf1 = OpTypePointer Uniform %buf1
%x_32 = OpVariable %_ptr_Uniform_buf1 Uniform
%_ptr_Input_v4float = OpTypePointer Input %v4float
%tint_symbol = OpVariable %_ptr_Input_v4float Input
%_ptr_Output_v4float = OpTypePointer Output %v4float
%tint_symbol_2 = OpVariable %_ptr_Output_v4float Output %17
%void = OpTypeVoid
%_ptr_Function_int = OpTypePointer Function %int
%26 = OpTypeFunction %void %_ptr_Function_int %_ptr_Function_int %_ptr_Function_int
%35 = OpConstantNull %int
%int_1 = OpConstant %int 1
%bool = OpTypeBool
%_ptr_Private_int = OpTypePointer Private %int
%int_10 = OpConstant %int 10
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%131 = OpTypeFunction %void
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%int_0 = OpConstant %int 0
%int_9 = OpConstant %int 9
%int_2 = OpConstant %int 2
%_ptr_Function_float = OpTypePointer Function %float
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%200 = OpConstantNull %float
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%uint_0 = OpConstant %uint 0
%_ptr_Uniform_float = OpTypePointer Uniform %float
%int_n5 = OpConstant %int -5
%true = OpConstantTrue %bool
%int_n4 = OpConstant %int -4
%int_n3 = OpConstant %int -3
%int_n2 = OpConstant %int -2
%int_n1 = OpConstant %int -1
%int_3 = OpConstant %int 3
%int_4 = OpConstant %int 4
%uint_1 = OpConstant %uint 1
%_ptr_Private_float = OpTypePointer Private %float
%int_30 = OpConstant %int 30
%float_0_5 = OpConstant %float 0.5
%float_10 = OpConstant %float 10
%int_60 = OpConstant %int 60
%int_90 = OpConstant %int 90
%int_120 = OpConstant %int 120
%int_150 = OpConstant %int 150
%int_180 = OpConstant %int 180
%int_5 = OpConstant %int 5
%int_210 = OpConstant %int 210
%int_6 = OpConstant %int 6
%int_240 = OpConstant %int 240
%int_7 = OpConstant %int 7
%int_270 = OpConstant %int 270
%int_8 = OpConstant %int 8
%v3float = OpTypeVector %float 3
%float_1 = OpConstant %float 1
%main_out = OpTypeStruct %v4float
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%403 = OpTypeFunction %void %main_out
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%merge_i1_i1_i1_ = OpFunction %void None %26
%from = OpFunctionParameter %_ptr_Function_int
%mid = OpFunctionParameter %_ptr_Function_int
%to = OpFunctionParameter %_ptr_Function_int
%33 = OpLabel
%k = OpVariable %_ptr_Function_int Function %35
%i = OpVariable %_ptr_Function_int Function %35
%j = OpVariable %_ptr_Function_int Function %35
%i_1 = OpVariable %_ptr_Function_int Function %35
%40 = OpLoad %int %from
OpStore %k %40
%42 = OpLoad %int %from
OpStore %i %42
%44 = OpLoad %int %mid
%46 = OpIAdd %int %44 %int_1
OpStore %j %46
OpBranch %47
%47 = OpLabel
OpLoopMerge %48 %49 None
OpBranch %50
%50 = OpLabel
%51 = OpLoad %int %i
%53 = OpLoad %int %mid
%54 = OpLoad %int %j
%56 = OpLoad %int %to
%57 = OpSLessThanEqual %bool %51 %53
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%59 = OpSLessThanEqual %bool %54 %56
%60 = OpLogicalAnd %bool %57 %59
OpSelectionMerge %61 None
OpBranchConditional %60 %62 %63
%62 = OpLabel
OpBranch %61
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%63 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranch %48
%61 = OpLabel
%64 = OpLoad %int %i
%66 = OpAccessChain %_ptr_Private_int %data %64
%67 = OpLoad %int %66
%68 = OpLoad %int %j
%69 = OpAccessChain %_ptr_Private_int %data %68
%70 = OpLoad %int %69
%71 = OpSLessThan %bool %67 %70
OpSelectionMerge %72 None
OpBranchConditional %71 %73 %74
%73 = OpLabel
%75 = OpLoad %int %k
%76 = OpIAdd %int %75 %int_1
OpStore %k %76
%77 = OpLoad %int %i
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%78 = OpIAdd %int %77 %int_1
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpStore %i %78
%79 = OpAccessChain %_ptr_Private_int %data %77
%80 = OpLoad %int %79
%81 = OpAccessChain %_ptr_Private_int %temp %75
OpStore %81 %80
OpBranch %72
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%74 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%82 = OpLoad %int %k
%83 = OpIAdd %int %82 %int_1
OpStore %k %83
%84 = OpLoad %int %j
%85 = OpIAdd %int %84 %int_1
OpStore %j %85
%86 = OpAccessChain %_ptr_Private_int %data %84
%87 = OpLoad %int %86
%88 = OpAccessChain %_ptr_Private_int %temp %82
OpStore %88 %87
OpBranch %72
%72 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %49
%49 = OpLabel
OpBranch %47
%48 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranch %89
%89 = OpLabel
OpLoopMerge %90 %91 None
OpBranch %92
%92 = OpLabel
%93 = OpLoad %int %i
%94 = OpLoad %int %i
%96 = OpLoad %int %mid
%98 = OpSLessThan %bool %93 %int_10
%99 = OpSLessThanEqual %bool %94 %96
%100 = OpLogicalAnd %bool %98 %99
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpSelectionMerge %101 None
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranchConditional %100 %102 %103
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%102 = OpLabel
OpBranch %101
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%103 = OpLabel
OpBranch %90
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%101 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%104 = OpLoad %int %k
%105 = OpIAdd %int %104 %int_1
OpStore %k %105
%106 = OpLoad %int %i
%107 = OpIAdd %int %106 %int_1
OpStore %i %107
%108 = OpAccessChain %_ptr_Private_int %data %106
%109 = OpLoad %int %108
%110 = OpAccessChain %_ptr_Private_int %temp %104
OpStore %110 %109
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %91
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%91 = OpLabel
OpBranch %89
%90 = OpLabel
%112 = OpLoad %int %from
OpStore %i_1 %112
OpBranch %113
%113 = OpLabel
OpLoopMerge %114 %115 None
OpBranch %116
%116 = OpLabel
%117 = OpLoad %int %i_1
%119 = OpLoad %int %to
%120 = OpSLessThanEqual %bool %117 %119
OpSelectionMerge %121 None
OpBranchConditional %120 %122 %123
%122 = OpLabel
OpBranch %121
%123 = OpLabel
OpBranch %114
%121 = OpLabel
%124 = OpLoad %int %i_1
%125 = OpLoad %int %i_1
%126 = OpAccessChain %_ptr_Private_int %temp %125
%127 = OpLoad %int %126
%128 = OpAccessChain %_ptr_Private_int %data %124
OpStore %128 %127
OpBranch %115
%115 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%129 = OpLoad %int %i_1
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%130 = OpIAdd %int %129 %int_1
OpStore %i_1 %130
OpBranch %113
%114 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpReturn
OpFunctionEnd
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%mergeSort_ = OpFunction %void None %131
%133 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%low = OpVariable %_ptr_Function_int Function %35
%high = OpVariable %_ptr_Function_int Function %35
%m = OpVariable %_ptr_Function_int Function %35
%i_2 = OpVariable %_ptr_Function_int Function %35
%from_1 = OpVariable %_ptr_Function_int Function %35
%mid_1 = OpVariable %_ptr_Function_int Function %35
%to_1 = OpVariable %_ptr_Function_int Function %35
%param = OpVariable %_ptr_Function_int Function %35
%param_1 = OpVariable %_ptr_Function_int Function %35
%param_2 = OpVariable %_ptr_Function_int Function %35
OpStore %low %int_0
OpStore %high %int_9
OpStore %m %int_1
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranch %146
%146 = OpLabel
OpLoopMerge %147 %148 None
OpBranch %149
%149 = OpLabel
%150 = OpLoad %int %m
%151 = OpLoad %int %high
%152 = OpSLessThanEqual %bool %150 %151
OpSelectionMerge %153 None
OpBranchConditional %152 %154 %155
%154 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %153
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%155 = OpLabel
OpBranch %147
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%153 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%156 = OpLoad %int %low
OpStore %i_2 %156
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %157
%157 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpLoopMerge %158 %159 None
OpBranch %160
%160 = OpLabel
%161 = OpLoad %int %i_2
%162 = OpLoad %int %high
%163 = OpSLessThan %bool %161 %162
OpSelectionMerge %164 None
OpBranchConditional %163 %165 %166
%165 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %164
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%166 = OpLabel
OpBranch %158
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%164 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%167 = OpLoad %int %i_2
OpStore %from_1 %167
%168 = OpLoad %int %i_2
%169 = OpLoad %int %m
%170 = OpIAdd %int %168 %169
%171 = OpISub %int %170 %int_1
OpStore %mid_1 %171
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%172 = OpLoad %int %i_2
%173 = OpLoad %int %m
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%174 = OpLoad %int %high
%178 = OpIMul %int %int_2 %173
%179 = OpIAdd %int %172 %178
%180 = OpISub %int %179 %int_1
%175 = OpExtInst %int %176 SMin %180 %174
OpStore %to_1 %175
%181 = OpLoad %int %from_1
OpStore %param %181
%182 = OpLoad %int %mid_1
OpStore %param_1 %182
%183 = OpLoad %int %to_1
OpStore %param_2 %183
%184 = OpFunctionCall %void %merge_i1_i1_i1_ %param %param_1 %param_2
OpBranch %159
%159 = OpLabel
%188 = OpLoad %int %m
%189 = OpLoad %int %i_2
%190 = OpIMul %int %int_2 %188
%191 = OpIAdd %int %189 %190
OpStore %i_2 %191
OpBranch %157
%158 = OpLabel
OpBranch %148
%148 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%192 = OpLoad %int %m
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%193 = OpIMul %int %int_2 %192
OpStore %m %193
OpBranch %146
%147 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpReturn
OpFunctionEnd
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%main_1 = OpFunction %void None %131
%195 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%i_3 = OpVariable %_ptr_Function_int Function %35
%j_1 = OpVariable %_ptr_Function_int Function %35
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%grey = OpVariable %_ptr_Function_float Function %200
%203 = OpAccessChain %_ptr_Uniform_float %x_28 %uint_0 %uint_0
%204 = OpLoad %float %203
%205 = OpConvertFToS %int %204
OpStore %i_3 %205
OpBranch %206
%206 = OpLabel
OpLoopMerge %207 %208 None
OpBranch %209
%209 = OpLabel
%210 = OpLoad %int %i_3
OpSelectionMerge %211 None
OpSwitch %210 %212 9 %213 8 %214 7 %215 6 %216 5 %217 4 %218 3 %219 2 %220 1 %221 0 %222
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%213 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%223 = OpLoad %int %i_3
%224 = OpAccessChain %_ptr_Private_int %data %223
OpStore %224 %int_n5
OpSelectionMerge %227 None
OpBranchConditional %true %228 %229
%228 = OpLabel
OpBranch %227
%229 = OpLabel
OpBranch %208
%227 = OpLabel
OpBranch %211
%214 = OpLabel
%230 = OpLoad %int %i_3
%231 = OpAccessChain %_ptr_Private_int %data %230
OpStore %231 %int_n4
OpBranch %211
%215 = OpLabel
%233 = OpLoad %int %i_3
%234 = OpAccessChain %_ptr_Private_int %data %233
OpStore %234 %int_n3
OpBranch %211
%216 = OpLabel
%236 = OpLoad %int %i_3
%237 = OpAccessChain %_ptr_Private_int %data %236
OpStore %237 %int_n2
OpBranch %211
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%217 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%239 = OpLoad %int %i_3
%240 = OpAccessChain %_ptr_Private_int %data %239
OpStore %240 %int_n1
OpBranch %211
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%218 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%242 = OpLoad %int %i_3
%243 = OpAccessChain %_ptr_Private_int %data %242
OpStore %243 %int_0
OpBranch %211
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%219 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%244 = OpLoad %int %i_3
%245 = OpAccessChain %_ptr_Private_int %data %244
OpStore %245 %int_1
OpBranch %211
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%220 = OpLabel
%246 = OpLoad %int %i_3
%247 = OpAccessChain %_ptr_Private_int %data %246
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpStore %247 %int_2
OpBranch %211
%221 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%248 = OpLoad %int %i_3
%249 = OpAccessChain %_ptr_Private_int %data %248
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpStore %249 %int_3
OpBranch %211
%222 = OpLabel
%251 = OpLoad %int %i_3
%252 = OpAccessChain %_ptr_Private_int %data %251
OpStore %252 %int_4
OpBranch %211
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%212 = OpLabel
OpBranch %211
%211 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%254 = OpLoad %int %i_3
%255 = OpIAdd %int %254 %int_1
OpStore %i_3 %255
OpBranch %208
%208 = OpLabel
%256 = OpLoad %int %i_3
%257 = OpSLessThan %bool %256 %int_10
OpBranchConditional %257 %206 %207
%207 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpStore %j_1 %int_0
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranch %258
%258 = OpLabel
OpLoopMerge %259 %260 None
OpBranch %261
%261 = OpLabel
%262 = OpLoad %int %j_1
%263 = OpSLessThan %bool %262 %int_10
OpSelectionMerge %264 None
OpBranchConditional %263 %265 %266
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%265 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranch %264
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%266 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranch %259
%264 = OpLabel
%267 = OpLoad %int %j_1
%268 = OpLoad %int %j_1
%269 = OpAccessChain %_ptr_Private_int %data %268
%270 = OpLoad %int %269
%271 = OpAccessChain %_ptr_Private_int %temp %267
OpStore %271 %270
OpBranch %260
%260 = OpLabel
%272 = OpLoad %int %j_1
%273 = OpIAdd %int %272 %int_1
OpStore %j_1 %273
OpBranch %258
%259 = OpLabel
%274 = OpFunctionCall %void %mergeSort_
%277 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%278 = OpLoad %float %277
%279 = OpConvertFToS %int %278
%281 = OpSLessThan %bool %279 %int_30
OpSelectionMerge %282 None
OpBranchConditional %281 %283 %284
%283 = OpLabel
%285 = OpAccessChain %_ptr_Private_int %data %int_0
%286 = OpLoad %int %285
%288 = OpConvertSToF %float %286
%290 = OpFDiv %float %288 %float_10
%291 = OpFAdd %float %float_0_5 %290
OpStore %grey %291
OpBranch %282
%284 = OpLabel
%292 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%293 = OpLoad %float %292
%294 = OpConvertFToS %int %293
%296 = OpSLessThan %bool %294 %int_60
OpSelectionMerge %297 None
OpBranchConditional %296 %298 %299
%298 = OpLabel
%300 = OpAccessChain %_ptr_Private_int %data %int_1
%301 = OpLoad %int %300
%302 = OpConvertSToF %float %301
%303 = OpFDiv %float %302 %float_10
%304 = OpFAdd %float %float_0_5 %303
OpStore %grey %304
OpBranch %297
%299 = OpLabel
%305 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%306 = OpLoad %float %305
%307 = OpConvertFToS %int %306
%309 = OpSLessThan %bool %307 %int_90
OpSelectionMerge %310 None
OpBranchConditional %309 %311 %312
%311 = OpLabel
%313 = OpAccessChain %_ptr_Private_int %data %int_2
%314 = OpLoad %int %313
%315 = OpConvertSToF %float %314
%316 = OpFDiv %float %315 %float_10
%317 = OpFAdd %float %float_0_5 %316
OpStore %grey %317
OpBranch %310
%312 = OpLabel
%318 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%319 = OpLoad %float %318
%320 = OpConvertFToS %int %319
%322 = OpSLessThan %bool %320 %int_120
OpSelectionMerge %323 None
OpBranchConditional %322 %324 %325
%324 = OpLabel
%326 = OpAccessChain %_ptr_Private_int %data %int_3
%327 = OpLoad %int %326
%328 = OpConvertSToF %float %327
%329 = OpFDiv %float %328 %float_10
%330 = OpFAdd %float %float_0_5 %329
OpStore %grey %330
OpBranch %323
%325 = OpLabel
%331 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%332 = OpLoad %float %331
%333 = OpConvertFToS %int %332
%335 = OpSLessThan %bool %333 %int_150
OpSelectionMerge %336 None
OpBranchConditional %335 %337 %338
%337 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpKill
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%338 = OpLabel
%339 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%340 = OpLoad %float %339
%341 = OpConvertFToS %int %340
%343 = OpSLessThan %bool %341 %int_180
OpSelectionMerge %344 None
OpBranchConditional %343 %345 %346
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%345 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%348 = OpAccessChain %_ptr_Private_int %data %int_5
%349 = OpLoad %int %348
%350 = OpConvertSToF %float %349
%351 = OpFDiv %float %350 %float_10
%352 = OpFAdd %float %float_0_5 %351
OpStore %grey %352
OpBranch %344
%346 = OpLabel
%353 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%354 = OpLoad %float %353
%355 = OpConvertFToS %int %354
%357 = OpSLessThan %bool %355 %int_210
OpSelectionMerge %358 None
OpBranchConditional %357 %359 %360
%359 = OpLabel
%362 = OpAccessChain %_ptr_Private_int %data %int_6
%363 = OpLoad %int %362
%364 = OpConvertSToF %float %363
%365 = OpFDiv %float %364 %float_10
%366 = OpFAdd %float %float_0_5 %365
OpStore %grey %366
OpBranch %358
%360 = OpLabel
%367 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%368 = OpLoad %float %367
%369 = OpConvertFToS %int %368
%371 = OpSLessThan %bool %369 %int_240
OpSelectionMerge %372 None
OpBranchConditional %371 %373 %374
%373 = OpLabel
%376 = OpAccessChain %_ptr_Private_int %data %int_7
%377 = OpLoad %int %376
%378 = OpConvertSToF %float %377
%379 = OpFDiv %float %378 %float_10
%380 = OpFAdd %float %float_0_5 %379
OpStore %grey %380
OpBranch %372
%374 = OpLabel
%381 = OpAccessChain %_ptr_Private_float %gl_FragCoord %uint_1
%382 = OpLoad %float %381
%383 = OpConvertFToS %int %382
%385 = OpSLessThan %bool %383 %int_270
OpSelectionMerge %386 None
OpBranchConditional %385 %387 %388
%387 = OpLabel
%390 = OpAccessChain %_ptr_Private_int %data %int_8
%391 = OpLoad %int %390
%392 = OpConvertSToF %float %391
%393 = OpFDiv %float %392 %float_10
%394 = OpFAdd %float %float_0_5 %393
OpStore %grey %394
OpBranch %386
%388 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpKill
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%386 = OpLabel
OpBranch %372
%372 = OpLabel
OpBranch %358
%358 = OpLabel
OpBranch %344
%344 = OpLabel
OpBranch %336
%336 = OpLabel
OpBranch %323
%323 = OpLabel
OpBranch %310
%310 = OpLabel
OpBranch %297
%297 = OpLabel
OpBranch %282
%282 = OpLabel
%395 = OpLoad %float %grey
%397 = OpCompositeConstruct %v3float %395 %395 %395
%398 = OpCompositeExtract %float %397 0
%399 = OpCompositeExtract %float %397 1
%400 = OpCompositeExtract %float %397 2
%402 = OpCompositeConstruct %v4float %398 %399 %400 %float_1
OpStore %x_GLF_color %402
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpReturn
OpFunctionEnd
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%tint_symbol_3 = OpFunction %void None %403
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%tint_symbol_1 = OpFunctionParameter %main_out
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%407 = OpLabel
%408 = OpCompositeExtract %v4float %tint_symbol_1 0
OpStore %tint_symbol_2 %408
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpReturn
OpFunctionEnd
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%main = OpFunction %void None %131
%410 = OpLabel
%411 = OpLoad %v4float %tint_symbol
OpStore %gl_FragCoord %411
%412 = OpFunctionCall %void %main_1
%414 = OpLoad %v4float %x_GLF_color
%415 = OpCompositeConstruct %main_out %414
%413 = OpFunctionCall %void %tint_symbol_3 %415
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpReturn
OpFunctionEnd