dawn-cmake/third_party/BUILD.gn

362 lines
8.8 KiB
Plaintext
Raw Normal View History

# Copyright 2018 The Dawn Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
import("../scripts/dawn_overrides_with_defaults.gni")
import("../scripts/dawn_features.gni")
import("//build_overrides/build.gni")
Add fuzzers for SPIRV-Cross This CL adds in fuzzers for SPIRV-Cross for HLSL, GLSL, and MSL outputs. These fuzzers live in Dawn because there is not appropriate location in the Chromium source repo for them and it is unlikely they would be land-able in the SPIRV-Cross repo, because it is not coupled with Chromium's build system and thus Clusterfuzz so would be effectively dead code. Dawn depends on this code, but it is also integrated into the Chromium build system, so this was the best place I could find for them The code under fuzz unfortunately uses exceptions/aborting as its error reporting mechanism. This is an acknowledge short coming and there are efforts to remove this behaviour. To work around this and reduce the number of false positives found by the fuzzers, a signal trap has been implemented which will be removed once the code under fuzz has been updated. The trap replaces the existing signal handler and silencing signals while running the code under test. This allows the code under test to call abort() and not crash the fuzzing process. Theoretically, only SIGABRT should need to be trapped, but something is causing the signal from abort() to be converted to SIGSEGV when running under ASAN. This signal trap has been tested with the fuzzing/sanitizers by intentionally inserting bad calls that will occur after a few thousand test cases. It was confirmed that the fuzzer detected the issue and stops fuzzing. The alternate to implementing this signal trap would be to turn on exceptions for the fuzzer. This was attempted, but proved to be fruitless due to what was reported as an ODR issue, but couldn't couldn't be silenced. The likely underlying issue was a pre-built library or other object being built without exceptions was causing different versions of symbols or the exception version of the standard library not being instrumented by ASAN. Given the majority of Chromium eco-system turns off exceptions, fixing this issue would not be helpful to the larger community and was looking like it would require significant effort. BUG=chromium:903380 Change-Id: I63a5595383f99b7a0e150d72bb04c89b8d722631 Reviewed-on: https://dawn-review.googlesource.com/c/2260 Commit-Queue: Corentin Wallez <cwallez@chromium.org> Reviewed-by: Max Moroz <mmoroz@chromium.org> Reviewed-by: Corentin Wallez <cwallez@chromium.org>
2018-11-12 12:20:21 +00:00
if (build_with_chromium) {
import("//testing/libfuzzer/fuzzer_test.gni")
}
is_msvc = is_win && !is_clang
###############################################################################
# Third-party dependencies needed by libdawn_native
###############################################################################
# Glad
config("glad_public") {
include_dirs = [ "glad/include" ]
}
static_library("glad") {
sources = [
"glad/include/KHR/khrplatform.h",
"glad/include/glad/glad.h",
"glad/src/glad.c",
]
public_configs = [ ":glad_public" ]
}
# SPIRV-Cross
spirv_cross_dir = dawn_spirv_cross_dir
config("spirv_cross_public") {
include_dirs = [ "${spirv_cross_dir}/.." ]
defines = [ "SPIRV_CROSS_EXCEPTIONS_TO_ASSERTIONS" ]
}
static_library("spirv_cross") {
public_configs = [ ":spirv_cross_public" ]
if (!is_msvc) {
cflags_cc = [
"-Wno-implicit-fallthrough",
"-Wno-return-type",
"-Wno-sign-compare",
]
}
sources = [
"${spirv_cross_dir}/GLSL.std.450.h",
"${spirv_cross_dir}/spirv.hpp",
"${spirv_cross_dir}/spirv_cfg.cpp",
"${spirv_cross_dir}/spirv_cfg.hpp",
"${spirv_cross_dir}/spirv_common.hpp",
"${spirv_cross_dir}/spirv_cross.cpp",
"${spirv_cross_dir}/spirv_cross.hpp",
]
need_glsl_cross = dawn_enable_opengl
Add fuzzers for SPIRV-Cross This CL adds in fuzzers for SPIRV-Cross for HLSL, GLSL, and MSL outputs. These fuzzers live in Dawn because there is not appropriate location in the Chromium source repo for them and it is unlikely they would be land-able in the SPIRV-Cross repo, because it is not coupled with Chromium's build system and thus Clusterfuzz so would be effectively dead code. Dawn depends on this code, but it is also integrated into the Chromium build system, so this was the best place I could find for them The code under fuzz unfortunately uses exceptions/aborting as its error reporting mechanism. This is an acknowledge short coming and there are efforts to remove this behaviour. To work around this and reduce the number of false positives found by the fuzzers, a signal trap has been implemented which will be removed once the code under fuzz has been updated. The trap replaces the existing signal handler and silencing signals while running the code under test. This allows the code under test to call abort() and not crash the fuzzing process. Theoretically, only SIGABRT should need to be trapped, but something is causing the signal from abort() to be converted to SIGSEGV when running under ASAN. This signal trap has been tested with the fuzzing/sanitizers by intentionally inserting bad calls that will occur after a few thousand test cases. It was confirmed that the fuzzer detected the issue and stops fuzzing. The alternate to implementing this signal trap would be to turn on exceptions for the fuzzer. This was attempted, but proved to be fruitless due to what was reported as an ODR issue, but couldn't couldn't be silenced. The likely underlying issue was a pre-built library or other object being built without exceptions was causing different versions of symbols or the exception version of the standard library not being instrumented by ASAN. Given the majority of Chromium eco-system turns off exceptions, fixing this issue would not be helpful to the larger community and was looking like it would require significant effort. BUG=chromium:903380 Change-Id: I63a5595383f99b7a0e150d72bb04c89b8d722631 Reviewed-on: https://dawn-review.googlesource.com/c/2260 Commit-Queue: Corentin Wallez <cwallez@chromium.org> Reviewed-by: Max Moroz <mmoroz@chromium.org> Reviewed-by: Corentin Wallez <cwallez@chromium.org>
2018-11-12 12:20:21 +00:00
is_fuzzing = false
if (build_with_chromium) {
is_fuzzing = use_fuzzing_engine
}
if (dawn_enable_d3d12 || is_fuzzing) {
sources += [
"${spirv_cross_dir}/spirv_hlsl.cpp",
"${spirv_cross_dir}/spirv_hlsl.hpp",
]
need_glsl_cross = true
}
Add fuzzers for SPIRV-Cross This CL adds in fuzzers for SPIRV-Cross for HLSL, GLSL, and MSL outputs. These fuzzers live in Dawn because there is not appropriate location in the Chromium source repo for them and it is unlikely they would be land-able in the SPIRV-Cross repo, because it is not coupled with Chromium's build system and thus Clusterfuzz so would be effectively dead code. Dawn depends on this code, but it is also integrated into the Chromium build system, so this was the best place I could find for them The code under fuzz unfortunately uses exceptions/aborting as its error reporting mechanism. This is an acknowledge short coming and there are efforts to remove this behaviour. To work around this and reduce the number of false positives found by the fuzzers, a signal trap has been implemented which will be removed once the code under fuzz has been updated. The trap replaces the existing signal handler and silencing signals while running the code under test. This allows the code under test to call abort() and not crash the fuzzing process. Theoretically, only SIGABRT should need to be trapped, but something is causing the signal from abort() to be converted to SIGSEGV when running under ASAN. This signal trap has been tested with the fuzzing/sanitizers by intentionally inserting bad calls that will occur after a few thousand test cases. It was confirmed that the fuzzer detected the issue and stops fuzzing. The alternate to implementing this signal trap would be to turn on exceptions for the fuzzer. This was attempted, but proved to be fruitless due to what was reported as an ODR issue, but couldn't couldn't be silenced. The likely underlying issue was a pre-built library or other object being built without exceptions was causing different versions of symbols or the exception version of the standard library not being instrumented by ASAN. Given the majority of Chromium eco-system turns off exceptions, fixing this issue would not be helpful to the larger community and was looking like it would require significant effort. BUG=chromium:903380 Change-Id: I63a5595383f99b7a0e150d72bb04c89b8d722631 Reviewed-on: https://dawn-review.googlesource.com/c/2260 Commit-Queue: Corentin Wallez <cwallez@chromium.org> Reviewed-by: Max Moroz <mmoroz@chromium.org> Reviewed-by: Corentin Wallez <cwallez@chromium.org>
2018-11-12 12:20:21 +00:00
if (dawn_enable_metal || is_fuzzing) {
sources += [
"${spirv_cross_dir}/spirv_msl.cpp",
"${spirv_cross_dir}/spirv_msl.hpp",
]
need_glsl_cross = true
}
Add fuzzers for SPIRV-Cross This CL adds in fuzzers for SPIRV-Cross for HLSL, GLSL, and MSL outputs. These fuzzers live in Dawn because there is not appropriate location in the Chromium source repo for them and it is unlikely they would be land-able in the SPIRV-Cross repo, because it is not coupled with Chromium's build system and thus Clusterfuzz so would be effectively dead code. Dawn depends on this code, but it is also integrated into the Chromium build system, so this was the best place I could find for them The code under fuzz unfortunately uses exceptions/aborting as its error reporting mechanism. This is an acknowledge short coming and there are efforts to remove this behaviour. To work around this and reduce the number of false positives found by the fuzzers, a signal trap has been implemented which will be removed once the code under fuzz has been updated. The trap replaces the existing signal handler and silencing signals while running the code under test. This allows the code under test to call abort() and not crash the fuzzing process. Theoretically, only SIGABRT should need to be trapped, but something is causing the signal from abort() to be converted to SIGSEGV when running under ASAN. This signal trap has been tested with the fuzzing/sanitizers by intentionally inserting bad calls that will occur after a few thousand test cases. It was confirmed that the fuzzer detected the issue and stops fuzzing. The alternate to implementing this signal trap would be to turn on exceptions for the fuzzer. This was attempted, but proved to be fruitless due to what was reported as an ODR issue, but couldn't couldn't be silenced. The likely underlying issue was a pre-built library or other object being built without exceptions was causing different versions of symbols or the exception version of the standard library not being instrumented by ASAN. Given the majority of Chromium eco-system turns off exceptions, fixing this issue would not be helpful to the larger community and was looking like it would require significant effort. BUG=chromium:903380 Change-Id: I63a5595383f99b7a0e150d72bb04c89b8d722631 Reviewed-on: https://dawn-review.googlesource.com/c/2260 Commit-Queue: Corentin Wallez <cwallez@chromium.org> Reviewed-by: Max Moroz <mmoroz@chromium.org> Reviewed-by: Corentin Wallez <cwallez@chromium.org>
2018-11-12 12:20:21 +00:00
if (need_glsl_cross || is_fuzzing) {
sources += [
"${spirv_cross_dir}/spirv_glsl.cpp",
"${spirv_cross_dir}/spirv_glsl.hpp",
]
}
}
# An empty Vulkan target to add the include dirs and list the sources
# for the header inclusion check.
config("vulkan_headers_public") {
include_dirs = [ "." ]
}
source_set("vulkan_headers") {
sources = [
"vulkan/vk_platform.h",
"vulkan/vulkan.h",
]
public_configs = [ ":vulkan_headers_public" ]
}
###############################################################################
# Gtest Gmock - Handle building inside and outside of Chromium.
###############################################################################
# When building outside of Chromium we need to define our own targets for GTest
# and GMock. However when compiling inside of Chromium we need to reuse the
# existing targets, both because Chromium has a special harness for swarming
# and because otherwise the "gn check" fails.
if (!build_with_chromium) {
# When we aren't in Chromium we define out own targets based on the location
# of the googletest repo.
googletest_dir = dawn_googletest_dir
config("gtest_config") {
include_dirs = [
"${googletest_dir}/googletest",
"${googletest_dir}/googletest/include",
]
}
static_library("gtest") {
testonly = true
sources = [
"${googletest_dir}/googletest/src/gtest-all.cc",
]
public_configs = [ ":gtest_config" ]
}
config("gmock_config") {
include_dirs = [
"${googletest_dir}/googlemock",
"${googletest_dir}/googlemock/include",
"${googletest_dir}/googletest/include",
]
}
static_library("gmock") {
testonly = true
sources = [
"${googletest_dir}/googlemock/src/gmock-all.cc",
]
public_configs = [ ":gmock_config" ]
}
group("gmock_and_gtest") {
testonly = true
public_deps = [
":gmock",
":gtest",
]
}
} else {
# When we are in Chromium we reuse its targets, and also add some deps that
# are needed to launch the test in swarming mode.
group("gmock_and_gtest") {
testonly = true
public_deps = [
"//base",
"//base/test:test_support",
"//testing/gmock",
"//testing/gtest",
]
}
}
###############################################################################
# GLFW - good enough build targets
###############################################################################
glfw_dir = dawn_glfw_dir
config("glfw_public") {
include_dirs = [ "${glfw_dir}/include" ]
if (is_win) {
defines = [ "_GLFW_WIN32" ]
}
if (is_mac) {
defines = [ "_GLFW_COCOA" ]
}
if (is_linux) {
defines = [ "_GLFW_X11" ]
}
}
static_library("glfw") {
public_configs = [ ":glfw_public" ]
if (is_msvc) {
# nonstandard extension, function/data pointer conversion in expression
cflags_c = [ "/wd4152" ]
} else {
cflags_c = [ "-Wno-sign-compare" ]
}
sources = [
"${glfw_dir}/include/GLFW/glfw3.h",
"${glfw_dir}/include/GLFW/glfw3native.h",
"${glfw_dir}/src/context.c",
"${glfw_dir}/src/egl_context.c",
"${glfw_dir}/src/egl_context.h",
"${glfw_dir}/src/init.c",
"${glfw_dir}/src/input.c",
"${glfw_dir}/src/internal.h",
"${glfw_dir}/src/monitor.c",
"${glfw_dir}/src/osmesa_context.c",
"${glfw_dir}/src/osmesa_context.h",
"${glfw_dir}/src/vulkan.c",
"${glfw_dir}/src/window.c",
]
libs = []
if (is_win) {
sources += [
"${glfw_dir}/src/wgl_context.c",
"${glfw_dir}/src/wgl_context.h",
"${glfw_dir}/src/win32_init.c",
"${glfw_dir}/src/win32_joystick.c",
"${glfw_dir}/src/win32_joystick.h",
"${glfw_dir}/src/win32_monitor.c",
"${glfw_dir}/src/win32_platform.h",
"${glfw_dir}/src/win32_time.c",
"${glfw_dir}/src/win32_thread.c",
"${glfw_dir}/src/win32_window.c",
]
}
if (is_linux || is_mac) {
sources += [
"${glfw_dir}/src/posix_thread.c",
"${glfw_dir}/src/posix_thread.h",
]
}
if (is_linux) {
sources += [
"${glfw_dir}/src/glx_context.c",
"${glfw_dir}/src/glx_context.h",
"${glfw_dir}/src/linux_joystick.c",
"${glfw_dir}/src/linux_joystick.h",
"${glfw_dir}/src/posix_time.c",
"${glfw_dir}/src/posix_time.h",
"${glfw_dir}/src/x11_init.c",
"${glfw_dir}/src/x11_monitor.c",
"${glfw_dir}/src/x11_platform.h",
"${glfw_dir}/src/x11_window.c",
"${glfw_dir}/src/xkb_unicode.c",
"${glfw_dir}/src/xkb_unicode.h",
]
libs += [
"rt",
"dl",
"X11",
"Xcursor",
"Xinerama",
"Xrandr",
]
}
if (is_mac) {
sources += [
"${glfw_dir}/src/cocoa_init.m",
"${glfw_dir}/src/cocoa_joystick.h",
"${glfw_dir}/src/cocoa_joystick.m",
"${glfw_dir}/src/cocoa_monitor.m",
"${glfw_dir}/src/cocoa_platform.h",
"${glfw_dir}/src/cocoa_time.c",
"${glfw_dir}/src/cocoa_window.m",
"${glfw_dir}/src/nsgl_context.h",
"${glfw_dir}/src/nsgl_context.m",
]
libs += [
"Cocoa.framework",
"IOKit.framework",
"CoreFoundation.framework",
"CoreVideo.framework",
]
cflags_objc = [
"-Wno-sign-compare",
"-Wno-unguarded-availability",
]
}
}
###############################################################################
# Header-only dependencies for samples
###############################################################################
if (dawn_standalone) {
# GLM
config("glm_public_config") {
include_dirs = [ "glm" ]
}
source_set("glm") {
public_configs = [ ":glm_public_config" ]
# GLM is header only but has too many files to list them.
}
# STB
config("stb_public_config") {
include_dirs = [ "stb" ]
if (!is_msvc) {
cflags_cc = [ "-Wno-implicit-fallthrough" ]
}
}
source_set("stb") {
public_configs = [ ":stb_public_config" ]
sources = [
"stb/stb_image.h",
]
}
# PicoJSON
config("picojson_public_config") {
include_dirs = [ "." ]
}
source_set("picojson") {
public_configs = [ ":picojson_public_config" ]
sources = [
"picojson/picojson.h",
]
}
# Tiny glTF Loader
config("tiny_gltf_loader_public_config") {
include_dirs = [ "." ]
}
source_set("tiny_gltf_loader") {
public_configs = [ ":tiny_gltf_loader_public_config" ]
public_deps = [
":picojson",
":stb",
]
sources = [
"tinygltfloader/tiny_gltf_loader.h",
]
}
}