encounter
/
dawn-cmake
mirror of https://github.com/encounter/dawn-cmake.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
dawn-cmake/test/vk-gl-cts/graphicsfuzz/cov-tail-duplicator-infinit.../0-opt.wgsl.expected.spvasm

196 lines
7.4 KiB
Plaintext
Raw Normal View History

Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
; SPIR-V
; Version: 1.3
; Generator: Google Tint Compiler; 0
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
; Bound: 106
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
; Schema: 0
OpCapability Shader
OpMemoryModel Logical GLSL450
OpEntryPoint Fragment %main "main" %tint_symbol_1
OpExecutionMode %main OriginUpperLeft
OpName %x_GLF_color "x_GLF_color"
OpName %buf1 "buf1"
OpMemberName %buf1 0 "x_GLF_uniform_float_values"
OpName %x_5 "x_5"
OpName %buf2 "buf2"
OpMemberName %buf2 0 "zero"
OpName %x_7 "x_7"
OpName %buf0 "buf0"
OpMemberName %buf0 0 "x_GLF_uniform_int_values"
OpName %x_10 "x_10"
OpName %tint_symbol_1 "tint_symbol_1"
OpName %main_1 "main_1"
OpName %i "i"
OpName %main_out "main_out"
OpMemberName %main_out 0 "x_GLF_color_1"
OpName %tint_symbol_2 "tint_symbol_2"
OpName %tint_symbol "tint_symbol"
OpName %main "main"
OpDecorate %buf1 Block
OpMemberDecorate %buf1 0 Offset 0
OpDecorate %_arr_float_uint_2 ArrayStride 16
OpDecorate %x_5 NonWritable
OpDecorate %x_5 DescriptorSet 0
OpDecorate %x_5 Binding 1
OpDecorate %buf2 Block
OpMemberDecorate %buf2 0 Offset 0
OpDecorate %x_7 NonWritable
OpDecorate %x_7 DescriptorSet 0
OpDecorate %x_7 Binding 2
OpDecorate %buf0 Block
OpMemberDecorate %buf0 0 Offset 0
OpDecorate %_arr_int_uint_2 ArrayStride 16
OpDecorate %x_10 NonWritable
OpDecorate %x_10 DescriptorSet 0
OpDecorate %x_10 Binding 0
OpDecorate %tint_symbol_1 Location 0
OpMemberDecorate %main_out 0 Offset 0
%float = OpTypeFloat 32
%v4float = OpTypeVector %float 4
%_ptr_Private_v4float = OpTypePointer Private %v4float
%5 = OpConstantNull %v4float
%x_GLF_color = OpVariable %_ptr_Private_v4float Private %5
%uint = OpTypeInt 32 0
%uint_2 = OpConstant %uint 2
%_arr_float_uint_2 = OpTypeArray %float %uint_2
%buf1 = OpTypeStruct %_arr_float_uint_2
%_ptr_Uniform_buf1 = OpTypePointer Uniform %buf1
%x_5 = OpVariable %_ptr_Uniform_buf1 Uniform
%buf2 = OpTypeStruct %float
%_ptr_Uniform_buf2 = OpTypePointer Uniform %buf2
%x_7 = OpVariable %_ptr_Uniform_buf2 Uniform
%int = OpTypeInt 32 1
%_arr_int_uint_2 = OpTypeArray %int %uint_2
%buf0 = OpTypeStruct %_arr_int_uint_2
%_ptr_Uniform_buf0 = OpTypePointer Uniform %buf0
%x_10 = OpVariable %_ptr_Uniform_buf0 Uniform
%_ptr_Output_v4float = OpTypePointer Output %v4float
%tint_symbol_1 = OpVariable %_ptr_Output_v4float Output %5
%void = OpTypeVoid
%22 = OpTypeFunction %void
%_ptr_Function_int = OpTypePointer Function %int
%28 = OpConstantNull %int
%uint_0 = OpConstant %uint 0
%int_0 = OpConstant %int 0
%_ptr_Uniform_float = OpTypePointer Uniform %float
%bool = OpTypeBool
%int_1 = OpConstant %int 1
%true = OpConstantTrue %bool
%_ptr_Uniform_int = OpTypePointer Uniform %int
%main_out = OpTypeStruct %v4float
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%94 = OpTypeFunction %void %main_out
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%main_1 = OpFunction %void None %22
%25 = OpLabel
%i = OpVariable %_ptr_Function_int Function %28
%32 = OpAccessChain %_ptr_Uniform_float %x_5 %uint_0 %int_0
%33 = OpLoad %float %32
%34 = OpCompositeConstruct %v4float %33 %33 %33 %33
OpStore %x_GLF_color %34
%35 = OpAccessChain %_ptr_Uniform_float %x_7 %uint_0
%36 = OpLoad %float %35
%37 = OpAccessChain %_ptr_Uniform_float %x_5 %uint_0 %int_0
%38 = OpLoad %float %37
%39 = OpFOrdGreaterThan %bool %36 %38
OpSelectionMerge %41 None
OpBranchConditional %39 %42 %43
%42 = OpLabel
OpBranch %44
%44 = OpLabel
OpLoopMerge %45 %46 None
OpBranch %47
%47 = OpLabel
%49 = OpAccessChain %_ptr_Uniform_float %x_5 %uint_0 %int_1
%50 = OpLoad %float %49
%51 = OpCompositeConstruct %v4float %50 %50 %50 %50
OpStore %x_GLF_color %51
OpBranch %46
%46 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranchConditional %true %44 %45
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%45 = OpLabel
OpBranch %41
%43 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranch %53
%53 = OpLabel
OpLoopMerge %54 %55 None
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %56
%56 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpBranch %57
%57 = OpLabel
OpLoopMerge %58 %59 None
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %60
%60 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
OpSelectionMerge %61 None
OpBranchConditional %true %62 %63
%62 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %61
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%63 = OpLabel
OpBranch %58
%61 = OpLabel
%65 = OpAccessChain %_ptr_Uniform_int %x_10 %uint_0 %int_1
%66 = OpLoad %int %65
OpStore %i %66
OpBranch %67
%67 = OpLabel
OpLoopMerge %68 %69 None
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %70
%70 = OpLabel
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%71 = OpLoad %int %i
%72 = OpAccessChain %_ptr_Uniform_int %x_10 %uint_0 %int_0
%73 = OpLoad %int %72
%74 = OpSLessThan %bool %71 %73
OpSelectionMerge %75 None
OpBranchConditional %74 %76 %77
%76 = OpLabel
OpBranch %75
%77 = OpLabel
OpBranch %68
%75 = OpLabel
%78 = OpAccessChain %_ptr_Uniform_float %x_5 %uint_0 %int_1
%79 = OpLoad %float %78
%80 = OpAccessChain %_ptr_Uniform_float %x_5 %uint_0 %int_0
%81 = OpLoad %float %80
%82 = OpAccessChain %_ptr_Uniform_float %x_5 %uint_0 %int_0
%83 = OpLoad %float %82
%84 = OpAccessChain %_ptr_Uniform_float %x_5 %uint_0 %int_1
%85 = OpLoad %float %84
%86 = OpCompositeConstruct %v4float %79 %81 %83 %85
OpStore %x_GLF_color %86
OpBranch %69
%69 = OpLabel
%87 = OpLoad %int %i
%88 = OpIAdd %int %87 %int_1
OpStore %i %88
OpBranch %67
%68 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %58
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%59 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %57
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%58 = OpLabel
OpBranch %55
%55 = OpLabel
%89 = OpAccessChain %_ptr_Uniform_float %x_7 %uint_0
%90 = OpLoad %float %89
%91 = OpAccessChain %_ptr_Uniform_float %x_5 %uint_0 %int_0
%92 = OpLoad %float %91
%93 = OpFOrdGreaterThan %bool %90 %92
OpBranchConditional %93 %53 %54
%54 = OpLabel
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpBranch %41
%41 = OpLabel
OpReturn
OpFunctionEnd
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%tint_symbol_2 = OpFunction %void None %94
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
%tint_symbol = OpFunctionParameter %main_out
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%98 = OpLabel
%99 = OpCompositeExtract %v4float %tint_symbol 0
OpStore %tint_symbol_1 %99
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpReturn
OpFunctionEnd
%main = OpFunction %void None %22
spir-writer: handle break continuing block The continuing block can exit the loop in very constrained ways: When a break statement is placed such that it would exit from a loop’s § 7.3.8 Continuing Statement, then: - The break statement must appear as either: - The only statement in the if clause of an if statement that has: - no else clause or an empty else clause - no elseif clauses - The only statement in the else clause of an if statement that has an empty if clause and no elseif clauses. - That if statement must appear last in the continuing clause. By design, this allows a lossless round-trip from SPIR-V to WGSL and back to SPIR-V. But that requires this special case construct in WGSL to be translated to an OpBranchConditional with one target being the loop's megre block (which is where 'break' branches to), and the other targets the loop header (which is the loop backedge). That OpBranchConditional takes the place of the normal case of an unconditional backedge. Avoids errors like this: continue construct with the continue target X is not post dominated by the back-edge block Y Fixed: 1034 Change-Id: If472a179380b8d77af746a3cd8e279c8a5e56b37 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/59800 Auto-Submit: David Neto <dneto@google.com> Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: David Neto <dneto@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-27 15:12:27 +00:00
%101 = OpLabel
%102 = OpFunctionCall %void %main_1
%104 = OpLoad %v4float %x_GLF_color
%105 = OpCompositeConstruct %main_out %104
%103 = OpFunctionCall %void %tint_symbol_2 %105
Add tests derived from VK-GL-CTS This adds SPIR-V assembly and WGSL tests derived from VK-GL-CTS commit 571256871c2e2f03995373e1e4a02958d8cd8cf5. The following procedure was followed: - Those .amber files in VK-GL-CTS wholly owned by Google were identified - All GLSL and SPIR-V shaders were extracted from the Amber files and converted into SPIR-V binaries - The compact-ids pass of spirv-opt was applied to each binary - Duplicate binaries were removed - spirv-opt -O was used to obtain an optimized version of each remaining binary, with duplicates discarded - Binaries that failed validation using spirv-val with target environment SPIR-V 1.3 were discarded - Those binaries that tint could not successfully convert into WGSL were put aside for further investigation - SPIR-V assembly versions of the remaining binaries are included in this CL - test-runner with -generate-expected and -generate-skip was used to generate expected .spvasm, .msl, .hlsl and .wgsl outputs for these SPIR-V assembly tests - Each successfully-generated .expected.wgsl is included in this CL again, as a WGLSL test - test-runner with -generate-expected and -generate-skip was used again, to generate expected outputs for these WGSL tests Change-Id: Ibe9baf2729cf97e0b633db9a426f53362a5de540 Reviewed-on: https://dawn-review.googlesource.com/c/tint/+/58842 Kokoro: Kokoro <noreply+kokoro@google.com> Commit-Queue: Ben Clayton <bclayton@google.com> Reviewed-by: Ben Clayton <bclayton@google.com>
2021-07-23 13:10:12 +00:00
OpReturn
OpFunctionEnd