SDL/include/SDL_config_android.h

158 lines
4.0 KiB
C
Raw Normal View History

/*
Simple DirectMedia Layer
2017-01-02 02:33:28 +00:00
Copyright (C) 1997-2017 Sam Lantinga <slouken@libsdl.org>
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
*/
#ifndef SDL_config_android_h_
#define SDL_config_android_h_
#define SDL_config_h_
#include "SDL_platform.h"
/**
* \file SDL_config_android.h
*
* This is a configuration that can be used to build SDL for Android
*/
#include <stdarg.h>
#define HAVE_GCC_ATOMICS 1
#define HAVE_ALLOCA_H 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_STDIO_H 1
#define STDC_HEADERS 1
#define HAVE_STRING_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_CTYPE_H 1
#define HAVE_MATH_H 1
Fixed bug 2758 - Android issues with NDK r10c and API-21 Sylvain After a long time, I found out more clearly what was going wrong. The native libraries should be built with a "APP_PLATFORM" as low as possible. Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml So that the application never runs on a lower APP_PLATFORM than it has been built for. An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10 (If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10. And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".) to precise what happened in the initial reported test-case: Let say the "c" code contains a call to "srand()". with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()". with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()". but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()). So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10. That was the issue. The path tried to fix this by in fact always calling srand48(). SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform. It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions. Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
2016-10-14 13:57:55 +00:00
#define HAVE_SIGNAL_H 1
/* C library functions */
#define HAVE_MALLOC 1
#define HAVE_CALLOC 1
#define HAVE_REALLOC 1
#define HAVE_FREE 1
#define HAVE_ALLOCA 1
#define HAVE_GETENV 1
#define HAVE_SETENV 1
#define HAVE_PUTENV 1
#define HAVE_SETENV 1
#define HAVE_UNSETENV 1
#define HAVE_QSORT 1
#define HAVE_ABS 1
#define HAVE_BCOPY 1
#define HAVE_MEMSET 1
#define HAVE_MEMCPY 1
#define HAVE_MEMMOVE 1
#define HAVE_MEMCMP 1
#define HAVE_STRLEN 1
#define HAVE_STRLCPY 1
#define HAVE_STRLCAT 1
#define HAVE_STRDUP 1
#define HAVE_STRCHR 1
#define HAVE_STRRCHR 1
#define HAVE_STRSTR 1
#define HAVE_STRTOL 1
#define HAVE_STRTOUL 1
#define HAVE_STRTOLL 1
#define HAVE_STRTOULL 1
#define HAVE_STRTOD 1
#define HAVE_ATOI 1
Fixed bug 2758 - Android issues with NDK r10c and API-21 Sylvain After a long time, I found out more clearly what was going wrong. The native libraries should be built with a "APP_PLATFORM" as low as possible. Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml So that the application never runs on a lower APP_PLATFORM than it has been built for. An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10 (If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10. And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".) to precise what happened in the initial reported test-case: Let say the "c" code contains a call to "srand()". with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()". with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()". but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()). So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10. That was the issue. The path tried to fix this by in fact always calling srand48(). SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform. It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions. Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
2016-10-14 13:57:55 +00:00
#define HAVE_ATOF 1
#define HAVE_STRCMP 1
#define HAVE_STRNCMP 1
#define HAVE_STRCASECMP 1
#define HAVE_STRNCASECMP 1
#define HAVE_VSSCANF 1
#define HAVE_VSNPRINTF 1
#define HAVE_M_PI 1
#define HAVE_ATAN 1
#define HAVE_ATAN2 1
#define HAVE_ACOS 1
#define HAVE_ASIN 1
#define HAVE_CEIL 1
#define HAVE_COPYSIGN 1
#define HAVE_COS 1
#define HAVE_COSF 1
#define HAVE_FABS 1
#define HAVE_FLOOR 1
#define HAVE_LOG 1
#define HAVE_POW 1
#define HAVE_SCALBN 1
#define HAVE_SIN 1
#define HAVE_SINF 1
#define HAVE_SQRT 1
#define HAVE_SQRTF 1
#define HAVE_TAN 1
#define HAVE_TANF 1
Fixed bug 2758 - Android issues with NDK r10c and API-21 Sylvain After a long time, I found out more clearly what was going wrong. The native libraries should be built with a "APP_PLATFORM" as low as possible. Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml So that the application never runs on a lower APP_PLATFORM than it has been built for. An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10 (If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10. And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".) to precise what happened in the initial reported test-case: Let say the "c" code contains a call to "srand()". with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()". with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()". but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()). So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10. That was the issue. The path tried to fix this by in fact always calling srand48(). SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform. It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions. Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
2016-10-14 13:57:55 +00:00
#define HAVE_SIGACTION 1
#define HAVE_SETJMP 1
#define HAVE_NANOSLEEP 1
#define HAVE_SYSCONF 1
#define HAVE_CLOCK_GETTIME 1
#define SIZEOF_VOIDP 4
/* Enable various audio drivers */
#define SDL_AUDIO_DRIVER_ANDROID 1
#define SDL_AUDIO_DRIVER_DUMMY 1
/* Enable various input drivers */
#define SDL_JOYSTICK_ANDROID 1
#define SDL_HAPTIC_ANDROID 1
/* Enable various shared object loading systems */
#define SDL_LOADSO_DLOPEN 1
/* Enable various threading systems */
#define SDL_THREAD_PTHREAD 1
#define SDL_THREAD_PTHREAD_RECURSIVE_MUTEX 1
/* Enable various timer systems */
#define SDL_TIMER_UNIX 1
/* Enable various video drivers */
#define SDL_VIDEO_DRIVER_ANDROID 1
/* Enable OpenGL ES */
#define SDL_VIDEO_OPENGL_ES 1
#define SDL_VIDEO_OPENGL_ES2 1
#define SDL_VIDEO_OPENGL_EGL 1
#define SDL_VIDEO_RENDER_OGL_ES 1
#define SDL_VIDEO_RENDER_OGL_ES2 1
/* Enable Vulkan surface support */
/* Android does not support Vulkan in native code using the "armeabi" ABI. */
#if !defined(__ARM_EABI__) || defined(__ARM_ARCH_7A__)
#define SDL_VIDEO_VULKAN_SURFACE 1
#else
#define SDL_VIDEO_VULKAN_SURFACE 0
#endif
/* Enable system power support */
#define SDL_POWER_ANDROID 1
/* Enable the filesystem driver */
#define SDL_FILESYSTEM_ANDROID 1
#endif /* SDL_config_android_h_ */