David Brady
When I attempted to make a mapping file for Android gamepads, I quickly discovered that most of the ones that I have here show up as the same device (Broadcom Bluetooth HID), meaning that it was impossible to make mappings on Android, since every device looked the same.
This patch will check for the existence of the getDescriptor function added in Jelly Bean, and use it if it's there. The Android Dashboard says that the majority of Android phones should support this function, and doing it this way will not force us to bump up our API version.
chw
Control key sequences from hardware keyboards (wireless/USB/bluetooth) get not properly reported on Android devices.
The attached patch uses the idea from http://stackoverflow.com/questions/12337117/capture-all-ctrl-under-android to make control key sequences appear as normal SDL_KEYDOWN events instead of cooked text input.
Sylvain
Hi! here's a patch for that with two class loaded regarding API level.
Test both case : before API 11 and after.
I also remove now unused GetSystemServiceFromUIThread() and minor clean-up (haptic warning prototype).
Sylvain
Small patch for this issue. I tested it and it seems to work.
- it can send several backspaces (instead of only 1).
- it calls directly "sendKeyEvent()" instead of "super.sendKeyEvent()".
otherwise, it would go through the android internals, calling again "onKey()".
and then the "backspace" would arrive after the next "commitText()".
Sylvain
Here's a patch.
It tries to get the hint first. Resizable will allow any orientation. Otherwise it uses width/height window.
setOrientation method is splitted in static and non-static, so that it can be overloaded in a user subclass.
Some artefact observed :
surfaceChanged() can be called twice at the beginning. When the phone starts in portrait and run a landscape application.
ny00
According to the current documentation in SDL_hints.h, if SDL_HINT_ANDROID_SEPARATE_MOUSE_AND_TOUCH is set to "0" (or not set at all) then mouse input should lead to touch events, along with corresponding *fake* mouse events with mouse id SDL_TOUCH_MOUSEID.
However, while moving a mouse around (actually using a trackpad identified as a mouse), I get SDL mouse motion events with differing mouse ids, as follows:
- If the mouse is moved while a mouse button is pressed, the mouse id is SDL_TOUCH_MOUSEID.
- Otherwise, the mouse id for mouse motion events is 0.
I've attached sample code for reference, which includes logs of the various mouse events (the "which" field is covered).
I believe that no actual mouse event should arrive, if the hint is unset. In particular, no mouse motion event should arrive while no mouse button is pressed.
I'm going to attach a patch which resolves this, while also disabling mouse wheel motion events.
Sylvain
On Android, when shared libraries are not correctly loaded (eg SDLActivity.mBrokenLibraries is true), there is a pop-up with an error message.
After user dismisses the pop-up, application crashes:
- because the native function "nativePause()" may no be loaded (if libSDL2.so is not loaded).
- because mSurface is null.
Fixes Bugzilla #3448.
"Starting with Android API 13, another configuration change must be declared
to be handled by the app if it is desired to not let the system handle
rotation itself:
https://developer.android.com/guide/topics/resources/runtime-changes.html#HandlingTheChange
This will have effect if either a developer or SDL per default will set target
API > 12. Currently it is set to 12, but this might change in the future, like
when applying this patch: https://bugzilla.libsdl.org/show_bug.cgi?id=3445
The effect of not having this change applied is that the SDL app is destroyed
upon rotation. Even when the manifest has an additional entry to e.g. always
stay in landscape mode, the onDestroy() call will happen on devices that are
portrait per default, when switching off screen due to power save. The device
will then (at least try to) rotate into portrait to show the portrait screen
lock after resume.
I believe it is safe to apply this patch even with target API still set to 12,
the additional parameter is simply ignored."
Fixes Bugzilla #3562.
From Sylvain:
"With an android landscape application, if you quickly lock, then unlock your
device, you can see sometimes a quick glitch: screen badly draws in portrait,
then it correctly displays in landscape.
Not talking of a smooth rotation, it's a drawing glitch. And you need to have
a plain lock screen, with no model nor passphrase.
I think it happens because the call to "nativeResume()" occurs sometimes too
early.
It should be done once you have *all* those three things (in any sequence):
- onWindowsFocusChanged() set to true
- onResume() called
- a valid call to onSurfaceChanged()
Currently, this is not the case: you don't need to have onResume() called.
Just need to have isPaused, (eg onPaused()).
So "isPaused" should be renamed as "isResumedCalled".
But you also need some kind of isPaused state to make sure to don't call
nativePause() twice (and deadlocks...).
There are also redundant checks to "mHasFocus" and some creation of the
initialisation thread code from onSurfaceChanged() that could me moved.
So here's this patch:
- add some states, so we have cleaner transitions.
- make sure "onResume()" is called.
- some clean up
- it also goes faster in pause state (focus changed, onPause, without requiring isSurfaceReady which does seems to be needed).
Tested on a few devices and it removes the glitch.
But I haven't tested when the activity goes back to "init" state."
"Using an application in portrait orientation, turning off the device would
dispatch SDL_APP_WILLENTERBACKGROUND, then SDL_APP_DIDENTERBACKGROUND then
lock the screen.
However, rotating the application the application to landscape, then turning
off the device would incorrectly dispatch SDL_APP_WILLENTERBACKGROUND,
SDL_APP_WILLENTERBACKGROUND, SDL_APP_WILLENTERFOREGROUND and then
SDL_APP_DIDENTERFOREGROUND before locking the screen. You can imagine how
this created trouble :)
It appears this occurs because (on this application) turning off a device
when in landscape is triggering a resize. The resize logic in SDLActivity
triggers a resume.
This patch has resolved the issue on my device:
It prevents the dispatch of (improper) FOREGROUND events when locking
the device, but we get still events when the device is turned back on
and unlocked."
ny00
Unfortunately, simply checking the return codes of "onNativePadDown/Up" as previously done has its own issue:
If an SDL joystick is connected *and* opened, then a proper KeyEvent, say with keycode KEYCODE_BUTTON_1, should lead to an SDL joystick button event as expected.
If, however, the joystick was *not* opened, then "onNativePadDown/Up" will return a negative value, so before the commit from bug 3426, you could unexpectedly get a keyboard event. (In practice, you'll just get a log message, since KEYCODE_BUTTON_1 has no mapping to a proper SDL_ScanCode value, but it's still an problem).
What should still be done, though, is checking the key code itself. We do have the KeyEvent.isGamepadButton method, but according my test, it returns "true" exactly (and only) for the KEYCODE_BUTTON* values, and not for KEYCODE_DPAD* or any other key code.
Here is a possible solution:
- Do check the return codes of "onNativePadDown/Up" as previously done.
- In addition, in "Android_OnPadDown/Up" from src/joystick/android/SDL_sysjoystick.c, 0 should *always* be returned in case the key code can be translated to an SDL_joystick button; Even if no matching joystick can be found.
Sylvain
After a long time, I found out more clearly what was going wrong.
The native libraries should be built with a "APP_PLATFORM" as low as possible.
Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml
So that the application never runs on a lower APP_PLATFORM than it has been built for.
An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10
(If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10.
And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".)
to precise what happened in the initial reported test-case:
Let say the "c" code contains a call to "srand()".
with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()".
with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()".
but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()).
So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10.
That was the issue. The path tried to fix this by in fact always calling srand48().
SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform.
It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions.
Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
Deve
When I'm trying to close on-screen keyboard using SDL_StopTextInput() function by touching the screen (SDL_FINGERUP or SDL_FINGERDOWN event), the screen is flickering. It is white for a while.
Note that it usually works without problems when I use phone's "back" button. I noticed flickering occasionally too, but not that often.
Philipp Wiesemann
The attached patch maybe fixes the flicker but not the actual fault causing it.
ny00
This report is going to cover three issues, with a suggestion for fixes. For reference, tests were done using an installation of android-x86-5.1-rc1.iso within a VirtualBox session. I've actually used an adapter that accepts up to two Playstation 1/2 controllers.
A ZIP file should be attached, with the following contents:
- The patch file itself.
- Outputs of joysticks lists from testjoystick with different orders (before fixing bug).
- Game controllers database entries (for reference).
--- Different outputs for different platforms may stem from different tools being used; The Android mapping was manually constructed using a previously available mapping as a base.
--- Note that it turns out the Linux mapping is already out there in some form: https://github.com/gabomdq/SDL_GameControllerDB/blob/master/gamecontrollerdb.txt
And so, let's begin listing the issues:
1. While changeset https://hg.libsdl.org/SDL/rev/9b540bea3cf1 has good intentions, it appears to make various input devices being mistakenly detected as SDL joysticks. I got lists of the devices from joysticktest, given in the ZIP file. "badordering.txt" is what I get if the device has been plugged since a reboot of the virtual machine, while I've gotten "goodordering.txt" after hot-plugging the USB adapter. As expected, only in the latter case I could use the controller in the test program (assuming it isn't modified).
To take care of this, I updated pollInputDevices and added the function SDLActivity.isDeviceSDLJoystick, in order to have a better filter. Note that it also checks that the device id is non-negative, since VIRTUAL_KEYBOARD appears to include a SOURCE_DPAD, and I should probably keep accepting it as an SDL_joystick (good if you want, say, to support multiple independent d-pad devices).
I hope the device id filter does not break support for the virtual remote (mentioned in the changeset above).
2. So there's a weird glitch here, where the game controller is reported to have SOURCE_KEYBOARD and SOURCE_JOYSTICK, while each controller button press/release emits a KeyEvent with SOURCE_KEYBOARD only. So obviously any test going over the event's own sources is expected to fail.
It is possible to try and filter by the key code, but then there are the dpad key codes, which can also be emitted by actual PC keyboard's key presses/releases (the arrow keys).
So instead, I just call the newly added isDeviceSDLJoystick function again and check if the input device (not the event) has any source considered to be a joystick/gamepad for us.
3. Finally, if SDL2 properly detects an SDL_Joystick being connected, but it is not opened, then whenever a KeyEvent is received after a button press/release from the same controller, SDLActivity.onNativePadDown/onNativePadUp returns a negative value. In such a case, the onKey handler continues to check for SOURCE_KEYBOARD (and possibly also SOURCE_MOUSE), which is clearly not desired.
And so, in the given patch, the return values of onNativePadDown and onNativePadUp are ignored and "true" is returned either way.
(Note: Maybe the native functions should be modified to have the return value of "void".)
Finally, as another side-note, I've noticed that the various bitwise tests for sources are wrong. For instance, to check if an InputDevice 'device' has source SOURCE_JOYSTICK, the value (device.getSources() & SOURCE_JOYSTICK) should be compared to SOURCE_JOYSTICK, not 0.
However, I think there's enough that this patch covers. At the least, isDeviceSDLJoystick partially solves this.
This conversation came from Joshua Granick on Twitter, starting here:
https://twitter.com/singmajesty/status/653640543675641857
"We found an issue where certain Android keyboards (like the S6 with
predictive text) wouldn't work ... Certain keyboards use a predictive text
mode that does not dispatch a traditional onKey events, which is troublesome
... but telling the OS to use a "visible password" keyboard helps deal with
this problem ... perhaps there's some other way (onKeyPreIme?) to do
"textediting" events, but for now, this should be a fast fix ...
I hear it affects the Galaxy Tab A 8.0", Galaxy S6, Asus ZenPhone 2, maybe
others"
They were not needed internally since the switch to the common EGL backend.
Thanks to the SDL mailing list for pointing out that the functions seem unused.
It was redundant because SDLActivity already inherits an empty method from the
base class SurfaceView (which does not implement it but inherits it from View).
Visibility of onDraw() in SDLActivity is now protected again instead of public.
The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly
uninitialized data structure if loading the library first failed. A later try to
use EGL then skipped initialization and assumed it was previously successful
because the data structure now already existed. This led to at least one crash
in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was
dereferenced to make a call to eglBindAPI().
Sam Lantinga
Ryan C. Gordon
dmuratshin
Philipp Wiesemann
Cole Campbell