Case fallthrough warnings can be suppressed using the __fallthrough__
compiler attribute. Unfortunately, not all compilers have this
attribute, or even have __has_attribute to check if they have the
__fallthrough__ attribute. [[fallthrough]] is also available in C++17
and the next C2x, but not everyone uses C++17 or C2x.
So define the SDL_FALLTHROUGH macro to deal with those problems - if we
are using C++17 or C2x, it expands to [[fallthrough]]; else if the
compiler has __has_attribute and has the __fallthrough__ attribute, then
it expands to __attribute__((__fallthrough__)); else it expands to an
empty statement, with a /* fallthrough */ comment (it's a do {} while
(0) statement, because users of this macro need to use a semicolon,
because [[fallthrough]] and __attribute__((__fallthrough__)) require a
semicolon).
Clang before Clang 10 and GCC before GCC 7 have problems with using
__attribute__ as a sole statement and warn about a "declaration not
declaring anything", so fall back to using the /* fallthrough */ comment
if we are using those older compiler versions.
Applications using SDL are also free to use this macro (because it is
defined in begin_code.h).
All existing /* fallthrough */ comments have been replaced with this
macro. Some of them were unnecessary because they were the last case in
a switch; using SDL_FALLTHROUGH in those cases would result in a compile
error on compilers that support __fallthrough__, for having a
__attribute__((__fallthrough__)) statement that didn't immediately
precede a case label.
Case fallthrough warnings can be suppressed using the __fallthrough__
compiler attribute. Unfortunately, not all compilers have this
attribute, or even have __has_attribute to check if they have the
__fallthrough__ attribute. [[fallthrough]] is also available in C++17
and the next C2x, but not everyone uses C++17 or C2x.
So define the SDL_FALLTHROUGH macro to deal with those problems - if we
are using C++17 or C2x, it expands to [[fallthrough]]; else if the
compiler has __has_attribute and has the __fallthrough__ attribute, then
it expands to __attribute__((__fallthrough__)); else it expands to an
empty statement, with a /* fallthrough */ comment (it's a do {} while
(0) statement, because users of this macro need to use a semicolon,
because [[fallthrough]] and __attribute__((__fallthrough__)) require a
semicolon).
Applications using SDL are also free to use this macro (because it is
defined in begin_code.h).
All existing /* fallthrough */ comments have been replaced with this
macro. Some of them were unnecessary because they were the last case in
a switch; using SDL_FALLTHROUGH in those cases would result in a compile
error on compilers that support __fallthrough__, for having a
__attribute__((__fallthrough__)) statement that didn't immediately
precede a case label.
* SDLTest_CommonDrawWindowInfo: log SDL_RenderGetScale, SDL_RenderGetLogicalSize
* testwm2: fix video modes menu hit detection in High DPI cases
- also when logical size is specified, e.g.
`--logical 640x480 --resizable --allow-highdpi`
* add function to determine logical coordinates of renderer point when given window point
* change since to the targeted milestone
* fix typo
* rename for consistency
* Change logical coordinate type to float, since we can render with floating point precision.
* add function to convert logical to window coordinates
* testwm2: use new SDL_RenderWindowToLogical
* SDL_render.c: alternate SDL_RenderWindowToLogical/SDL_RenderLogicalToWindow
Co-authored-by: John Blat <johnblat64@protonmail.com>
Co-authored-by: John Blat <47202511+johnblat64@users.noreply.github.com>
There are two issues which are stopping the SDL tests from building on
my machine:
- libunwind is not being linked
- Even if it is, it is missing several symbols.
The first is fixed by having the test programs link against libunwind if
available. Technically, SDL2_test should be linking against it, as it's
used in SDL_test_memory.c, but as SDL2_test is a static library, it
can't itself import libunwind. We just assume that if it's present on
the system, we should link it directly to the test programs. This should
strictly be an improvement, as the only case where this'd fail is if
SDL2 was compiled when libunwind was present, but the tests are being
compiled without it, and that'd fail anyway.
The second is fixed by #define-ing UNW_LOCAL_ONLY before including
libunwind.h: this is required to make libunwind link to predicatable
symbols, in what can only be described as a bit of a farce. There are a
few more details in the libunwind man page, but the gist of it is that
it disables support for "remote unwinding": unwinding stack frames in a
different process (and possibly from a different architecture?):
http://www.nongnu.org/libunwind/man/libunwind(3).html
Note that I haven't tried this with CMake: I suspect that it'll work,
though, as the CMakeLists.txt seems to have SDL2 link against libunwind if
it's present. This adds an ugly extra dependency to SDL2, but does mean
that issue 1 isn't present. The UNW_LOCAL_ONLY change shouldn't be
build-system-specific.
The version with an implicit pattern rule tended to fail if test/
was built in an "out-of-tree" build directory not below test/, for
example:
cd SDL
mkdir _build-test
( cd _build-test; ../test/configure )
make -C _build-test
as a result of the pattern rule first checking for axis.bmp, then for
../test/axis.bmp, then ../test/../test/axis.bmp, and so on until the
maximum path length was reached.
Note that this requires GNU make. The FreeBSD ports file for SDL seems
to use GNU make (gmake) already, so presumably SDL's build system is
already relying on GNU make extensions.
Signed-off-by: Simon McVittie <smcv@debian.org>
AC_CONFIG_AUX_DIRS is an undocumented, internal version of
AC_CONFIG_AUX_DIR that takes a whitespace-separated list, instead of a
single path to add to the list. It also does not automatically treat
the given path as being relative to the $srcdir, unlike the documented
AC_CONFIG_AUX_DIR.
Newer versions of autoconf treat the argument to AC_CONFIG_AUX_DIRS
as being literal (they do not expand the shell variable), causing
autoreconf to fail if $srcdir is explicitly specified. The argument to
AC_CONFIG_AUX_DIR is checked relative to $srcdir anyway, so there is no
need to specify $srcdir a second time.
Resolves: https://github.com/libsdl-org/SDL/issues/4719
Signed-off-by: Simon McVittie <smcv@debian.org>
[--use-rendergeometry mode1|mode2]
mode1: Draw sprite2 as triangles that can be recombined as rect by software renderer
mode2: Draw sprite2 as triangles that can *not* be recombined as rect by software renderer
Use an 'indices' array
There were a few places throughout the SDL code where values were
clamped using SDL_min() and SDL_max(). Now that we have an SDL_clamp()
macro, use this instead.
On Wayland -- or at least on some Wayland implementations -- windows
aren't shown until something has been rendered into them. For the
'checkkeys' test program, this means that keyboard input isn't
registered, making the program rather useless.
By creating a renderer and presenting once, the window is properly
displayed, and the test behaves as it does under X11 (including
XWayland).
The exact same thing was done with testmessge in 1cd97e2695 (PR #4252)
SDL_Vulkan_GetDrawableSize() doesn't always return a size which is
within the Vulkan swapchain's allowed image extent range.
(This happens on X11 a lot when resizing, which is bug #3287)
Clamp the value we get back from SDL_Vulkan_GetDrawableSize() to this
range. Given the range usually is just a single value, this is almost
always equivalent to just using the min or max image extent, but this
seems logically most correct.
If you continually poll for events it's possible that new events can come in while you're still processing the last one, delaying rendering. This is more likely with high update rate sensors.
When possible use native os functions to make a blocking call waiting for
an incoming event. Previous behavior was to continuously poll the event
queue with a small delay between each poll.
The blocking call uses a new optional video driver event,
WaitEventTimeout, if available. It is called only if an window
already shown is available. If present the window is designated
using the variable wakeup_window to receive a wakeup event if
needed.
The WaitEventTimeout function accept a timeout parameter. If
positive the call will wait for an event or return if the timeout
expired without any event. If the timeout is zero it will
implement a polling behavior. If the timeout is negative the
function will block indefinetely waiting for an event.
To let the main thread sees events sent form a different thread
a "wake-up" signal is sent to the main thread if the main thread
is in a blocking state. The wake-up event is sent to the designated
wakeup_window if present.
The wake-up event is sent only if the PushEvent call is coming
from a different thread. Before sending the wake-up event
the ID of the thread making the blocking call is saved using the
variable blocking_thread_id and it is compared to the current
thread's id to decide if the wake-up event should be sent.
Two new optional video device methods are introduced:
WaitEventTimeout
SendWakeupEvent
in addition the mutex
wakeup_lock
which is defined and initialized but only for the drivers supporting the
methods above.
If the methods are not present the system behaves as previously
performing a periodic polling of the events queue.
The blocking call is disabled if a joystick or sensor is detected
and falls back to previous behavior.
On Wayland -- or at least on some Wayland implementations -- windows
aren't shown until something has been rendered into them. For the
'testmessage' test program, this means that the final messagebox (a
modal one) is blocking an "invisible window", which can then be
difficult to close.
By creating a renderer and presenting once, the window is properly
displayed, and the test behaves as it does under X11 (including
XWayland).
This adds SDL_SetWindowKeyboardGrab(), SDL_GetWindowKeyboardGrab(),
SDL_SetWindowMouseGrab(), SDL_GetWindowMouseGrab(), and new
SDL_WINDOW_KEYBOARD_GRABBED flag. It also updates the test harness to exercise
this functionality and makes a minor fix to X11 that I missed in
https://hg.libsdl.org/SDL/rev/02a2d609369b
To fit in with this new support, SDL_WINDOW_INPUT_CAPTURE has been renamed to
SDL_WINDOW_MOUSE_CAPTURE with the old name remaining as an alias for backwards
compatibility with older code.
SDL_SemPost() was called by the FIFO threads after the semaphore was
freed because the main thread actually synchronized on the
`writerRunning`/`readersRunning` count and not the semaphores itself.
- acinclude/alsa.m4, esd.m4: Ran through autoupdate to replace several
AC_TRY_[COMPILE|LINK|RUN] with corresponding AC_???_IFELSE , so that
autoconf-2.70 doesn't warn.
- sdl2.m4: Ditto.
- test/acinclude.m4 (sdl2): Ditto.
- remove HP/UX 9 (%@#!) support
- change fopen() mode from "a" to "w" in test code.
- bump its serial num to 2.
- test/acinclude.m4: same sdl2.m4 updates.
Specifically this patch which does not invoke _AC_PATH_X_XMKMF and
_AC_PATH_X_DIRECT internal autoconf routines when cross-compiling:
http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commitdiff;h=33c3a47c04ab70a4dd54963fe433a171bc03747f
Without this, CFLAGS would brokenly have system include paths like
-I/usr/include/X11 when cross-compiling e.g. for windows. (And it
also resulted in annoying imake crashes for my setup...)
configure output is practically unchanged. there are still lots of
AC_TRY_COMPILE/AC_TRY_LINK replacements needed to really eliminate
the warnings, but that's for another time.
- SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title
or message field to "" if either of them is NULL.
- SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to ""
if either of them is NULL for EMSCRIPTEN builds.
- SDL_bmessagebox.cc: add empty string check along with NULL check for
title and message fields.
- SDL_windowsmessagebox.c (AddDialogString): remove NULL string check
- SDL_windowsmessagebox.c (AddDialogControl): add empty string check
along with the NULL check.
- SDL_x11messagebox.c: revert commit 677c4cd68069
- SDL_os2messagebox.c: revert commit 2c2a489d76e7
- test/testmessage.c: Add NULL title and NULL message tests.
Added support for the PS4 controller gyro and accelerometer on iOS and HIDAPI drivers
Also fixed an issue with the accelerometer on iOS having inverted axes
This uses pre-recorded evdev capabilities, so that we can check for
regressions without the devices having to be physically present.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver
PS4 and PS5 controllers use AUX1 to represent the touchpad button
Nintendo Switch Pro controllers use AUX1 to represent the capture button
This driver supports the Razer Atrox Arcade Stick
Some of the quirks of this driver, inherent in Windows Gaming Input:
* There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers.
* You can't read the state of the guide button
* You can't get controller events in the background
The warnings were produced by GCC 9.2.x for x86_64-linux-gnu or
i386-pc-msdosdjgpp targets.
Most of the fixes involve changing the type of a variable rather than
the format specifier. For many of the affected test conuter variables,
a basic int seems sufficient.
Some format specifier warnings still remain for cases where changing
type or casting seemed inappropriate. Those warnings will probably
require some new format specifier macros (e.g. SDL_PRIu32).
DominikD
There are several tests that need resources in the output directory to work:
* `testiconv` depends on `utf8.txt`
* `testoverlay2` and `teststreaming` depend on `moose.dat`
This patch adds these two files to the `RESOURCE_FILES` variable.
One could also copy `shapes\*.bmp` over to the output directory for `testshape` to use but this patch doesn't do that for three reasons:
* executable takes path as an argument and doesn't need these files side by side
* these are ~45MB and copying them over would cause build directory to swell
* there are already files in the output directory that can be used with this test (`sample.bmp` and `button.bmp`)
David Ludwig
I have created a new driver for SDL's Joystick and Game-Controller subsystem: a Virtual driver. This driver allows one to create a software-based joystick, which to SDL applications will look and react like a real joystick, but whose state can be set programmatically. A primary use case for this is to help enable developers to add touch-screen joysticks to their apps.
The driver comes with a set of new, public APIs, with functions to attach and detach joysticks, set virtual-joystick state, and to determine if a joystick is a virtual-one.
Use of virtual joysticks goes as such:
1. Attach one or more virtual joysticks by calling SDL_JoystickAttachVirtual. If successful, this returns the virtual-device's joystick-index.
2. Open the virtual joysticks (using indicies returned by SDL_JoystickAttachVirtual).
3. Call any of the SDL_JoystickSetVirtual* functions when joystick-state changes. Please note that virtual-joystick state will only get applied on the next call to SDL_JoystickUpdate, or when pumping or polling for SDL events (via SDL_PumpEvents or SDL_PollEvent).
Here is a listing of the new, public APIs, at present and subject to change:
------------------------------------------------------------
/**
* Attaches a new virtual joystick.
* Returns the joystick's device index, or -1 if an error occurred.
*/
extern DECLSPEC int SDLCALL SDL_JoystickAttachVirtual(SDL_JoystickType type, int naxes, int nballs, int nbuttons, int nhats);
/**
* Detaches a virtual joystick
* Returns 0 on success, or -1 if an error occurred.
*/
extern DECLSPEC int SDLCALL SDL_JoystickDetachVirtual(int device_index);
/**
* Indicates whether or not a virtual-joystick is at a given device index.
*/
extern DECLSPEC SDL_bool SDLCALL SDL_JoystickIsVirtual(int device_index);
/**
* Set values on an opened, virtual-joystick's controls.
* Returns 0 on success, -1 on error.
*/
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualAxis(SDL_Joystick * joystick, int axis, Sint16 value);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualBall(SDL_Joystick * joystick, int ball, Sint16 xrel, Sint16 yrel);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualButton(SDL_Joystick * joystick, int button, Uint8 value);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualHat(SDL_Joystick * joystick, int hat, Uint8 value);
------------------------------------------------------------
Miscellaneous notes on the initial patch, which are also subject to change:
1. no test code is present in SDL, yet. This should, perhaps, change. Initial development was done with an ImGui-based app, which potentially is too thick for use in SDL-official. If tests are to be added, what kind of tests? Automated? Graphical?
2. virtual game controllers can be created by calling SDL_JoystickAttachVirtual with a joystick-type of SDL_JOYSTICK_TYPE_GAME_CONTROLLER, with naxes (num axes) set to SDL_CONTROLLER_AXIS_MAX, and with nbuttons (num buttons) set to SDL_CONTROLLER_BUTTON_MAX. When updating their state, values of type SDL_GameControllerAxis or SDL_GameControllerButton can be casted to an int and used for the control-index (in calls to SDL_JoystickSetVirtual* functions).
3. virtual joysticks' guids are mostly all-zeros with the exception of the last two bytes, the first of which is a 'v', to indicate that the guid is a virtual one, and the second of which is a SDL_JoystickType that has been converted into a Uint8.
4. virtual joysticks are ONLY turned into virtual game-controllers if and when their joystick-type is set to SDL_JOYSTICK_TYPE_GAMECONTROLLER. This is controlled by having SDL's default list of game-controllers have a single entry for a virtual game controller (of guid, "00000000000000000000000000007601", which is subject to the guid-encoding described above).
5. regarding having to call SDL_JoystickUpdate, either directly or indirectly via SDL_PumpEvents or SDL_PollEvents, before new virtual-joystick state becomes active (as specified via SDL_JoystickSetVirtual* function-calls), this was done to match behavior found in SDL's other joystick drivers, almost all of which will only update SDL-state during SDL_JoystickUpdate.
6. the initial patch is based off of SDL 2.0.12
7. the virtual joystick subsystem is disabled by default. It should be possible to enable it by building with SDL_JOYSTICK_VIRTUAL=1
Questions, comments, suggestions, or bug reports very welcome!
Added the functions SDL_JoystickFromPlayerIndex(), SDL_JoystickSetPlayerIndex(), SDL_GameControllerFromPlayerIndex(), and SDL_GameControllerSetPlayerIndex()
The Offscreen video driver is intended to be used for headless rendering
as well as allows for multiple GPUs to be used for headless rendering
Currently only supports EGL (OpenGL / ES) or Framebuffers
Adds a hint to specifiy which EGL device to use: SDL_HINT_EGL_DEVICE
Adds testoffscreen.c which can be used to test the backend out
Disabled by default for now
This fills in the CFBundleVersion and CFBundleShortVersionString fields,
if and when SDL's test-apps are built via CMake. This is needed to install
the .app bundles on iOS 13+ (using 'xcrun simctl install booted path/to/testsuchandsuch.app')
When using a recent version of CMake (3.14+), this should make it possible to:
- build SDL for iOS, both static and dynamic
- build SDL test apps (as iOS .app bundles)
- generate a working SDL_config.h for iOS (using SDL_config.h.cmake as a basis)
To use, set the following CMake variables when running CMake's configuration stage:
- CMAKE_SYSTEM_NAME=iOS
- CMAKE_OSX_SYSROOT=<SDK> (examples: iphoneos, iphonesimulator, iphoneos12.4, /full/path/to/iPhoneOS.sdk, etc.)
- CMAKE_OSX_ARCHITECTURES=<semicolon-separated list of CPU architectures> (example: "arm64;armv7s")
Examples:
- for Simulator, using the latest, installed SDK:
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64
- for Device, using the latest, installed SDK, 64-bit only
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES=arm64
- for Device, using the latest, installed SDK, mixed 32/64 bit
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES="arm64;armv7s"
- for Device, using a specific SDK revision (iOS 12.4, in this example):
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos12.4 -DCMAKE_OSX_ARCHITECTURES=arm64
- for Simulator, using the latest, installed SDK, and building SDL test apps (as .app bundles):
cmake path/to/SDL -DSDL_TEST=1 -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64
Ozkan Sezer
Sam Lantinga
Sylvain
Ryan C. Gordon
Cameron Gutman
Misa
Eric Wasylishen
Eddy Jansson
David Gow
Brick
Cameron Cawley
Simon McVittie
Lionel Landwerlin
Vladislav Dmitrievich Turbanov
Francesco Abbate
Christian Rauch
Vanfanel
Erik Yuzwa
Vladislav Dmitrievich Turbanov
Joel Linn
Simon McVittie
Jay Petacat
David Ludwig
Brandon Schaefer