Eric Wasylishen
Unfortunately this commit seems to have broken exiting desktop-fullscreen.
- Launch testgl2.
- Press alt+enter to go fullscreen-desktop
- Press alt+enter again. The spinning cube will freeze, and the window stays fullscreen desktop.
Simon Hug
SDL_GL_GetAttribute doesn't check if a video driver has been initialized and will access the SDL_VideoDevice pointer, which is NULL at that point.
I think all of the attributes require an initialized driver, so a simple NULL check should fix it. Patch is attached.
Jason Wyatt
After hiding the window, SDL_WINDOW_HIDDEN/SDL_WINDOW_SHOWN flags on a window are correctly updated. However on the next SDL_PumpEvents, they are set incorrectly.
This appears to be because X11_GetNetWMState does not check whether the _NET_WM_STATE property exists (it shouldn't on unmapped windows, see https://specifications.freedesktop.org/wm-spec/wm-spec-1.3.html#idm140130317598336). This results in an empty list of atoms for the state, which would imply that the window is not hidden.
(Seen on Fedora 24, Gnome)
--
Dan Ginsburg
More details on my proposed patch: I am on Kubuntu 16.04.2. I ran into this same bug, but with Jason's patch I found that actualType != None was true so the SDL_WINDOW_HIDDEN would still not be set. My fix instead is to explicitly check for whether the window is unmapped rather than relying on the returned values in XGetWindowProperty.
felix
The functions in src/render/SDL_yuv_mmx.c contain the following inline assembly snippet:
/* tap dance to workaround the inability to use %%ebx at will... */
/* move one thing to the stack... */
"pushl $0\n" /* save a slot on the stack. */
"pushl %%ebx\n" /* save %%ebx. */
"movl %0, %%ebx\n" /* put the thing in ebx. */
"movl %%ebx,4(%%esp)\n" /* put the thing in the stack slot. */
"popl %%ebx\n" /* get back %%ebx (the PIC register). */
Here's how it ended up in a binary on my old laptop:
0xb5c17dbd <ColorRGBDitherYV12MMX1X+93>: push $0x0
0xb5c17dbf <ColorRGBDitherYV12MMX1X+95>: push %ebx
0xb5c17dc0 <ColorRGBDitherYV12MMX1X+96>: mov 0xc(%esp),%ebx
0xb5c17dc4 <ColorRGBDitherYV12MMX1X+100>: mov %ebx,0x4(%esp)
0xb5c17dc8 <ColorRGBDitherYV12MMX1X+104>: pop %ebx
Apparently the compiler, oblivious to the fact that the assembly snippet manipulates the %esp register, decided to refer to the operand via that same register instead of via %ebp (I believe -fomit-frame-pointer enables this). This causes %ebx to be loaded with the wrong value, which later leads to a null pointer dereference.
Recent GCC can use the %ebx register normally: <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=47602#c16>. There is even an explicit constraint "b" for allocating it.
Holger Schemel
Summary: This patch adds support for key events for the "rewind" and "fast forward" media keys on the Amazon Fire TV remote control.
How to reproduce the problem: Run Android build of SDL2 application on the Amazon Fire TV (tested with "stick" version) and log key events.
Expected behaviour: Every key pressed on the Fire TV remote control should result in a corresponding key event (pressed/released).
Observed behaviour: Of the bottom row of buttons on the Fire TV remote control, only the "play/pause" (middle) button generates a key event, while the "rewind" (left) and "fast forward" (right) buttons to not generate any event at all.
The attached patch adds support for these two missing buttons/keys.
Note 1: Some missing definitions were added for the already existing key codes SDL_SCANCODE_APP1 and SDL_SCANCODE_APP2 (to keep up the correct order of enumerations / array positions when adding the two new key codes).
Note 2: Definitions in "scancodes_linux.h" and "scancodes_xfree86.h" (to also add support for these keys on other platforms) were added without testing. However, I was unable to find corresponding definitions for these two media keys for Windows and Mac OS X.
Note 3: I have also updated the (broken) link to the USB usage page standard PDF document (comment in "include/SDL_scancode.h").
kdrakehp
The attached patch adds capture support to the sndio backend.
The patch also allows the `OpenDevice' function to accept arbitrary device names.
Bogomancer
On X11, windows created using the shaped window API appear distorted unless the width of the shape surface is divisible by 8.
Steps to reproduce:
1) Use your favorite image editor to resize one of the images in test/shapes/ to a width that's not a multiple of 8.
2) Compile and run test/testshape.c on the image you edited.
3) The shaped window will appear twisted and distorted.
It appears the bug was not caught sooner because all the test images are either 640 or 256 pixels wide.
I tracked down the bug to SDL_CalculateShapeBitmap() in SDL_shape.c. The shape surface is reduced to a 1-bit-per-pixel mask, but the original code doesn't take into account that X11 apparently wants each scanline to begin on a new byte.
Ozkan Sezer
(In reply to Ryan C. Gordon from comment #9)
> I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can
> you verify this works on the latest MinGW?
>
> Thanks,
> --ryan.
This patch is wrong: the structure in question has nothing to do with any
gcc version in use. I suggest reverting this adding a conigury check for
it, instead. Something like the following should do it: (configure needs
regenerating.)
Mark Callow
SDL_ShowMessageBox calls SDL_CaptureMouse which, in the UIKit driver, raises a ?That operation is not supported? error, overwriting the SDL error that an application may be trying to report.
This is because UIKit SDL_CaptureMouse returns SDL_Unsupported() which ends up calling SDL_SetError() which has the following code:
/* If we are in debug mode, print out an error message */
SDL_LogDebug(SDL_LOG_CATEGORY_ERROR, "%s", SDL_GetError());
The SDL_GetError call here overwrites the static buffer?..
Although an application can avoid this by using SDL_GetErrorMsg(char* errstr, int maxlen) to avoid the static buffer, SDL should be fixed.
The fix is simple. In SDL_SetError change
SDL_LogDebug(SDL_LOG_CATEGORY_ERROR, "%s", SDL_GetError());
to
SDL_LogDebug(SDL_LOG_CATEGORY_ERROR, "%s", error);
where error is the pointer to the buffer where it assembled the message.
Amruth Raj
- My app runs in full screen to play video(I use SDL_WINDOW_FULLSCREEN_DESKTOP)
- Cmd-tab to go out of full screen to another app
- Cmd-tab again to get back to my app
- Press left mouse button at one of the edges of the screen, don't release yet.
After this point the main thread is stuck until I release the left mouse button and hence video rendering doesn't happen anymore.
On debugging more, I see that thread 0 is stuck as shown below with sendEvent processing left mouse down. It comes out only after it receives a left mouse up. There are some frames below which show NSWindowResizing, but my window flag doesn't have SDL_WINDOW_RESIZABLE set.
Thread 0:: CrBrowserMain Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fffbe13d34a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fffbe13c797 mach_msg + 55
2 com.apple.CoreFoundation 0x00007fffa889d434 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x00007fffa889c8c1 __CFRunLoopRun + 1361
4 com.apple.CoreFoundation 0x00007fffa889c114 CFRunLoopRunSpecific + 420
5 com.apple.HIToolbox 0x00007fffa7dfdebc RunCurrentEventLoopInMode + 240
6 com.apple.HIToolbox 0x00007fffa7dfdcf1 ReceiveNextEventCommon + 432
7 com.apple.HIToolbox 0x00007fffa7dfdb26 _BlockUntilNextEventMatchingListInModeWithFilter + 71
8 com.apple.AppKit 0x00007fffa6396a54 _DPSNextEvent + 1120
9 com.apple.AppKit 0x00007fffa6b127ee -[NSApplication(NSEvent) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 2796
10 com.apple.AppKit 0x00007fffa66f568d +[NSWindow(NSWindowResizing) _mouseHysteresisCheck:withExpiration:andDistance:finalMouseLocation:] + 525
11 com.apple.AppKit 0x00007fffa65eedb5 -[NSWindow(NSWindowResizing) _hitTestWithHysteresisCheck:forEvent:allowWindowDragging:] + 394
12 com.apple.AppKit 0x00007fffa6c8f0db -[NSWindow(NSEventRouting) _handleMouseDownEvent:isDelayedEvent:] + 1873
13 com.apple.AppKit 0x00007fffa6c8ca6c -[NSWindow(NSEventRouting) _reallySendEvent:isDelayedEvent:] + 1942
14 com.apple.AppKit 0x00007fffa6c8bf0a -[NSWindow(NSEventRouting) sendEvent:] + 541
15 org.libsdl.SDL2 0x000000010d46d74a -[SDLWindow sendEvent:] + 90
16 com.apple.AppKit 0x00007fffa6b10681 -[NSApplication(NSEvent) sendEvent:] + 1145
17 org.libsdl.SDL2 0x000000010d46532b -[SDLApplication sendEvent:] + 139
18 org.libsdl.SDL2 0x000000010d466b2f Cocoa_PumpEvents + 495
19 org.libsdl.SDL2 0x000000010d44c1d5 SDL_PumpEvents_REAL + 53
20 org.libsdl.SDL2 0x000000010d44c2f5 SDL_WaitEventTimeout_REAL + 53
21 org.libsdl.SDL2 0x000000010d44c2b7 SDL_PollEvent_REAL + 23
22 org.libsdl.SDL2 0x000000010d51bb24 SDL_PollEvent + 36
23 libTest.dylib 0x000000010cf3e0e8 SDLEventProcessor::processEvents(int) + 568
24 Test 0x000000010cde6bba BrowserApp::RunAppMessageLoop(BAInstData*, CefStringBase, CefStringBase) + 810
25 Test 0x000000010ce04bbc main + 17980
26 libdyld.dylib 0x00007fffbe016235 start + 1
I further noticed that while entering full screen in SDL_cocoawindow.m NSResizableWindowMask is set. If I clear it inside windowDidEnterFullScreen, then, the issue doesn't repro.
This is discussed at https://discourse.libsdl.org/t/main-thread-gets-stuck-on-left-mouse-down/22753/3 and thanks to Eric for the pointers.
The Xlib documentation demands that 32-bit values here be passed in a long,
even when long itself isn't a 32-bit value. Otherwise libx11 might read
memory incorrectly.
Fixes Bugzilla #3692.
Simon Hug
There's a chance that an audio conversion from many channels to a few can use more than 9 audio filters. SDL_AudioCVT has 10 SDL_AudioFilter pointers of which one has to be the terminating NULL pointer. The SDL code has no checks for this limit. If it overflows there can be stack or heap corruption or a call to 0xa.
Attached patch adds a function that checks for this limit and throws an error if it is reached. Also adds some documentation.
Test parameters that trigger this issue:
AUDIO_U16MSB with 224 channels at 46359 Hz
V
AUDIO_S16MSB with 6 channels at 27463 Hz
The fuzzer program I uploaded in bug 3667 has more of them.
This only affects Wayland and DirectFB, as a Unix system generally has X11
support. Other platforms also have different sizes for the C union in
question, but are likely the only target for that platform, etc.
Apps that might run on Wayland or DirectFB will need to be compiled against
new headers from an official 2.0.6 release, or be prepared to force the x11
target, or not use SDL_GetWindowWMInfo().
Fixes Bugzilla #3428.
It's easier for Visual Studio users that want this information to turn it on
or live without it, than it is to explain why every debugger that isn't Visual
Studio crashes out here. Eventually SetThreadDescription() will be the thing
everyone uses anyhow.
Fixes Bugzilla #3645.
(and several others).
Failing to check if a key was known to be pressed by SDL was causing
SDL_SendKeyboardKey to send duplicate key pressed events with the repeat
property set to true.
Fixes Bugzilla #3637.
The message sent upon the window being activated or deactivated, to trigger
the call to SDL_SetKeyboardFocus was missing a mandatory parameter. So
keyboard focus was never properly set.
Fixes Bugzilla #3658.
We don't fill buffers just to throw them away during shutdown now, we let the
AudioQueue free its own buffers during disposal (which fixes possible warnings
getting printed to stderr by CoreAudio), and we stop the queue after running
any queued audio during shutdown, which prevents dropping the end of the
audio playback if you opened the device with an enormous sample buffer.
Fixes Bugzilla #3555.
We need more than two buffers to flip between if they are small, or CoreAudio
won't make any sound; apparently it needs X milliseconds of audio queued when
it needs to play more or it drops any queued buffers. We are currently
guessing 50 milliseconds as a minimum, but there's probably a more proper
way to get the minimum time period from the system.
Fixes Bugzilla #3656.
"In particular, only one VkSurfaceKHR can exist at a time for a given window. Similarly, a native window cannot be used by both a VkSurfaceKHR and EGLSurface simultaneously"
CR: SamL
If an Emscripten app is in relative mouse mode and the user presses Escape
(or whatever is appropriate), then the pointer lock is broken by the browser.
This keeps track of those losses, and next time the user presses a mouse
button down on the canvas, if the app is still meant to be in relative mouse
mode, we will attempt to regrab the pointer.
This makes it much more seamless for things like first-person shooters, and
the app doesn't need any manual intervention.
Samuel Hopkins
Just confirming that the patch from Andreas (attachment 1715 [details]) works for me under SDL 2.0.3 with xmonad.
Stas Sergeev
Confirming that the patch in this ticket fixes the full-screen switching for dosemu2 on ubuntu-16.04. Note that I am not using xmonad, so this bug appears to be generic.
This gracefully recovers when a device format is changed, and will switch
to the new default device if the current one is unplugged, etc.
This does not handle when a new default device is added; it only notices
if the current default goes away. That will be fixed by implementing the
stubbed-out MMNotificationClient_OnDefaultDeviceChanged() function.
"ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]"
Moving some variable declarations to the top of Android_SetScreenResolution()
* alsa hotplug thread is low priority
* give a chance for other threads to catch up when audio playback is not progressing
* use nonblocking for alsa audio capture
There is a bug with SDL hanging when an audio capture USB device is removed, because poll never returns
We will throw away the data anyhow, but some apps depend on the callback
firing to make progress; testmultiaudio.c, if nothing else, is an example
of this.
Capture also will now fire the callback in these conditions, offering nothing
but silence.
Apps can check SDL_GetAudioDeviceStatus() or listen for the
SDL_AUDIODEVICEREMOVED event if they want to gracefully deal with
an opened audio device that has been unexpectedly lost.
This is just enough to get you through a file that just used the extended
header for float or int data. It doesn't handle all the other things that
you expect from this header, like 24-bit samples inside a 32-bit container
or speaker masks.
This should remain binary compatible with Windows XP, as we dynamically
load anything we need and fall back to DirectSound/WinMM/XAudio2 if not
available.
Like other C runtimes, it should probably produce the string "(null)".
This bug probably only affected Windows, as most platforms use their standard
C runtime's snprintf().
Walter van Niftrik
We have found that since SDL 2.0.5 the audio callback thread is created with a very small stack size. In our application this is leading to stack overflows.
We believe there is a bug at http://hg.libsdl.org/SDL/file/391fd532f79e/src/audio/SDL_audio.c#l1132, where the is_internal_thread flag appears to be inverted.
Volumetric
In X11 the SDL error "Unknown touch device" can occur after which the application stops recognizing touch events. For a kiosk-type application this results in a hang as far as the user is concerned. This is reproducible on HP Z220/Z230/Z240 workstations by swapping USB cables for a while and it also occurs with no physical changes, probably due to USB device power management. A workaround is to make SDL re-enumerate the touch devices like it does at startup. A patch is attached.
Matthew
Its possible to set SDL_CaptureMouse() so you continue receiving mouse input while the mouse is outside your window. This works however There is then a gap where no messages send, which is when the mouse is hovering the title bar and the window edges.
X11 seemed to be confused by the broad definition, so WEIGHT_NAME,
SLANT and SETWIDTH_NAME were defined, thus fixing the font lookup
on some systems (tested on Mageia 6 with X11 1.19.1).
Fixes bug 3571.
Tom Seddon
GL_ActivateRenderer may call GL_UpdateViewport, which leaves the GL_PROJECTION matrix selected. But after GL_ResetState, the GL_MODELVIEW matrix is selected, suggesting that's the intended default state.
It seems at least like these should be consistent. Presumably GL_UpdateViewport should be doing a glMatrixMode(GL_MODELVIEW) before it finishes.
Also updates the naming of these Xbox Wireless Controllers connected via USB (and thus the third-party Xbox Controller Driver) to match.
The Xbox Wireless Controller entries are now listed, in order, via USB, bia Bluetooh (with older firmware) and via Bluetooth (with firmware 3.1.1221.0).
This is a bleeding edge API, added to Windows 10 Anniversary Edition (build
1607, specifically).
https://msdn.microsoft.com/en-us/library/windows/desktop/mt774976(v=vs.85).aspx
Nothing supports this yet, including WinDbg, Visual Studio, minidumps, etc,
so we still need to also use the RaiseException hack. But presumably tools
will use this API as a more robust and universal way to get thread names
sooner or later, so we'll start broadcasting to it now.
Firmware revision 3.1.1221.0 changes the mapping of the Xbox One S
controller in Bluetooth mode. Aside from changing the layout of
other buttons, this revision also changes the triggers to act as
Accelerator and Brake axes from the simulation controls page.
The Darwin sysjoystick code didn't previously map anything at these
axes, making it impossible to detect input on these two buttons.
This defaults to the internal SDL resampler, since that's the likely default
without a system-wide install of libsamplerate, but those that need more can
tweak this.
This currently favors libsamplerate over the fast path (quality over speed),
but I'm not sure that's the correct approach, as there may be surprising
changes in performance metrics depending on what packages are available on
a user's system. That being said, currently, the only thing with access to
SDL_AudioStream is an SDL audio device's thread, and it might be mostly idle
otherwise, so maybe this is generally good.
Turns out that iterating from 0 to channels-1 was a serious performance hit!
These cases now tend to match or beat the original audio resampler's speed!
This allows us to avoid an extra copy, allocate less memory and reduce cache
pressure. On the downside: we have to do a lot of tapdancing to resample the
buffer in reverse when the output is growing.
It's expensive and (hopefully) unnecessary. If this becomes an overflow
problem, we could multiply both values by 0.5f before adding them, but let's
see if we can get by without the extra multiplication first.
We never seem to overflow the source buffer now; this might have been a
leftover from a bug that was covered by Vitaly's fixes?
Removing this conditional makes the resampler 10-20% faster. Left an
assert in there for debug builds, in case this still happens.
white.magic
The logic which decides if a device enumerated via the direct input system in the function EnumJoysticksCallback in SDL_dinputjoystick.c is processed is discarding valid joystick devices due to the assumption that devices of the type DI8DEVTYPE_SUPPLEMENTAL are not valid devices.
This change was added with 2.0.4 with this commit http://hg.libsdl.org/SDL/rev/1b9d40126645 that is linked to this bug report https://bugzilla.libsdl.org/show_bug.cgi?id=2460 which indicates that in that case devices of the type DI8DEVTYPE_SUPPLEMENTAL were not desirable as they caused a singular device to emit multiple "device added" events.
Since then there appear to have been a few fixes to handle devices that fall into various other classes in the following two commits:
http://hg.libsdl.org/SDL/rev/10ffb4787d7a and http://hg.libsdl.org/SDL/rev/6a2bbac05728
Two devices I have reports of failing to be listed when the DI8DEVTYPE_SUPPLEMENTAL type is excluded are ECS Gametric Throttle and Thrustmaster MFD Cougar.
Sam Lantinga
I verified that the OUYA controller shows up as a single device with this change, so I've reverted the change to ignore supplemental devices, leaving framework in place to easily add devices that we want to ignore.
Removed some needless things ("len / sizeof (Uint8)"), and made sure the
int32 -> float code uses doubles to avoid working with large integer values
in a 32-bit float.
Mark Callow
The attached patch does the following for the X11 and Windows platforms, the only ones where SDL attempts to use context_create_es_profile:
- Adds SDL_HINT_OPENGL_ES_DRIVER by which the application can
say to use the OpenGL ES driver & EGL rather than the Open GL
driver. (For bug #2570)
- Adds code to {WIN,X11}_GL_InitExtensions to determine the maximum
OpenGL ES version supported by the OpenGL driver (for bug #3145)
- Modifies the test that determines whether to use the OpenGL
driver or the real OpenGL ES driver to take into account the
hint, the requested and supported ES version and whether ES 1.X
is being requested. (For bug #2570 & bug #3145)
- Enables the testgles2 test for __WINDOWS__ and __LINUX__ and adds
the test to the VisualC projects.
With the fix in place I have run testdraw2, testgl and testgles2 without any issues and have run my own apps that use OpenGL, OpenGL ES 3 and OpenGL ES 1.1.
Lukasz Biel
Tried to compile SDL2 using newest version of VS.
Got:
SDL_audiocvt.obj : error LNK2019: unresolved external symbol memcpy referenced in function SDL_ResampleCVT
1>E:\Users\dotPo\Lib\SDL\VisualC\x64\Release\SDL2.dll : fatal error LNK1120: 1 unresolved externals
whole compilation process: http://pastebin.com/eWDAvBce
Steps to reproduce:
clone http://hg.libsdl.org/SDL using tortoise hg,
open SDL\VisualC\SDL.sln,
when promted if should retarget solution click ok,
select release x64 build type,
Build/Build Solution
attempt 2, using Visual Studio cmake support:
open folder SDL\
select release x64 build type,
run CMake\Build CMakeLists.txt
build fails
When switched to debug build type, buils succeeds in both cases.
VS 2017 is still beta.
It causes audio pops if you're converting in chunks (and needs to
allocate/initialize/free on each convert). We'll either adjust this interface
when we break ABI for 2.1 to make this usable, or publish the SDL_AudioStream
API for those that want a streaming solution.
In the meantime, the "simple" resampler produces "good enough" audio without
pops and doesn't have to be initialized, so that'll do for now on the
SDL_AudioCVT interface.
K_NORMTAB, K_SHIFTTAB, K_ALTTAB, K_ALTSHIFTTAB
In the normal case we'll load all the keymaps from the kernel, but this reduces the size of the SDL library for the fallback case when we can't get to the tty.
Mark Logan 2015-08-24 15:57:50 UTC
In SDL_windowsopengles.c, WIN_GLES_SetSwapInterval is as follows:
WIN_GLES_SetSwapInterval(_THIS, int interval)
{
/* FIXME: This should call SDL_EGL_SetSwapInterval, but ANGLE has a bug that prevents this
* from working if we do (the window contents freeze and don't swap properly). So, we ignore
* the request for now.
*/
SDL_Log("WARNING: Ignoring SDL_GL_SetSwapInterval call due to ANGLE bug");
return 0;
}
With a recent version of ANGLE (early July) calling SDL_EGL_SetSwapInterval with a D3D11 backend appears to work just fine. I am working on testing this with D3D9.
--
Alex Szpakowski
I found the bug, it was fixed in 2013. https://bugs.chromium.org/p/angleproject/issues/detail?id=481
In my opinion it should be safe to unconditionally use SetSwapInterval now. Anyone who encounters the bug should update their ANGLE to a version less than 3 years old, especially since they'd be using a SDL version that's 3+ years newer than their ANGLE version.
Rob
I've ran into an issue where I successfully receive SDL_KEY[UP,DOWN] events but not SDL_TEXTINPUT or SDL_TEXTEDITING. In my case the code in SDL_EVDEV_do_text_input() is returning early (on error) prior to calling SDL_SendKeyboardText(). I'm running on the RaspberryPi 3, without X11.
In SDL_EVDEV_do_text_input() there is a condition to check keysyms with a type value below 0xf0, then subtract 0xf0 from type. Without understanding the purpose of this code, I disabled it, recompiled, and I'm getting correct SDL_TEXTINPUT events. I'm going to guess that my hack/fix is going to be problematic in some other environment, but after some initial testing it looks like everything is running fine in my setup.
Richard Russell
Resuming from a suspended state results in a black screen. This only happens when using GLES 1.1 (GLES 2 resumes correctly) and when the render target has been changed using SDL_SetRenderTarget. This problem is new in 2.0.4.
The attached test case demonstrates the issue.
Sylvain Becker has apparently found a fix as follows:
"In the opengles leaf function (in 'src/render/opengles/SDL_render_gles.c'), it appears there is a call to 'GLES_ActivateRenderer' in 'GLES_SetRenderTarget', which is not present in opengles2. When commenting out this 'GLES_ActivateRenderer', it seems to resume fine".
This appears to fix the testcase perfectly, but I don't know whether it could have any undesirable side-effects.
tvc
I believe this patch should fix it, instead of looping through all the tty's and seemingly selecting the wrong one and corrupting the console I've just made SDL open /dev/tty which is the console attached to the current process anyway.
felix
Here's a snippet of SDL_DestroyRenderer from hg revision 10746:7540ff5d0e0e:
SDL_Texture *texture = NULL;
SDL_Texture *nexttexture = NULL;
/* ... */
for (texture = renderer->textures; texture; texture = nexttexture) {
nexttexture = texture->next;
SDL_DestroyTexture(texture);
}
SDL_DestroyTexture removes the texture from the linked list pointed to by the renderer and ends up calling SDL_DestroyTextureInternal, which contains this:
if (texture->native) {
SDL_DestroyTexture(texture->native);
}
If it happens that texture->native is an alias of nexttexture two stack frames up, SDL_DestroyRenderer will end up trying to destroy an already freed texture. I've had this very situation happen in dosemu2.
Bug introduced in revision 10650:a8253d439914, which has a somewhat ironic description of "Fixed all known static analysis bugs"...
Rob
When calling ioctl(fd, KDGKBTYPE, &type) in SDL_EVDEV_is_console(), we declare type as an 'int'. This should be a 'char'. The subsequent syscall, and kernel code, only writes the lower byte of the word.
See: http://lxr.free-electrons.com/source/drivers/tty/vt/vt_ioctl.c?v=4.4#L399
ucval = KB_101;
ret = put_user(ucval, (char __user *)arg);
I've observed intermittent behavior related to this, and I can force an error condition by using an int initialized to 0xFFFFFFFF. The resulting ioctl will set type to 0XFFFFFF02, and the conditional return in SDL_EVDEV_is_console() will fail.
Recommend changing to char, or masking off unused bits.
There was a draft of this where it did audio conversion into the final buffer,
if there was enough room available past what you asked for, but that interface
got removed, so the parameters didn't make sense (and we were using the
wrong one in any case, too!).
For example, if sR is 0 and dR is 255, we will get -255*sA casted to an unsigned value. Basically results are quite large numbers instead of the expected 0-255 range.
Fixed a case where partial trigger pull could be bound to another button
There is a fundamental problem not resolved by this commit:
Some controllers have axes (triggers, pedals, etc.) that don't start at zero, but we're guaranteed that if we get a value that it's correct. For these controllers, the current code works, where we take the first value we get and use that as the zero point and generate axis motion starting from that point on.
Other controllers have digital axes (D-pad) that assume a zero starting point, and the first value we get is the min or max axis value when the D-pad is moved. For these controllers, the current code thinks that the zero point is the axis value after the D-pad motion and this doesn't work.
My hypothesis is that the first class of devices is more common and that we should solve for that, and add an exception to SDL_JoystickAxesCenteredAtZero() as needed for the second class of devices.
Ryan C. Gordon
Kristian says you can't do it with Wayland, and that going forward, it'll just handle whatever you throw at it anyhow.
https://twitter.com/hoegsberg/status/816148272402165761
So I say we mark it SDL_PIXELFORMAT_RGB888, which is what my X11 display currently reports, and leave it at that.
kaisyu
In case of OpenGLES, the sequences of loading and unloading driver library should be like that:
SDL_Init
...
SDL_GL_LoadLibrary
SDL_EGL_LoadLibrary
...
SDL_Quit
...
SDL_GL_UnloadLibrary
SDL_EGL_UnloadLibrary
...
However, according to my test results, the varible '_this->gl_config.driver_loaded' does not allow 'SDL_GL_UnloadLibrary' to call 'SDL_EGL_UnloadLibrary'.
Coriiander
This notice is about a misplaced comment.
Often times when we use an #if #endif sequence, the #endif is followed by a comment to indicate what #if statement it belonged to. The SDL_xaudio2.c file contains a misplaced comment, as follows (I stripped the other comments):
#ifdef __GNUC__
# define SDL_XAUDIO2_HAS_SDK 1
#elif defined(__WINRT__)
# define SDL_XAUDIO2_HAS_SDK
#include "SDL_xaudio2.h"
#else
#if 0
#include <dxsdkver.h>
#if (!defined(_DXSDK_BUILD_MAJOR) || (_DXSDK_BUILD_MAJOR < 1284))
# pragma message("Your DirectX SDK is too old. Disabling XAudio2 support.")
#else
# define SDL_XAUDIO2_HAS_SDK 1
#endif
#endif
#endif /* 0 */
That final /* 0 */ should be moved one line up. Like this (I tabbed it out for you to make it more clear):
Tristan
The internal SDL_vsnprintf implementation accesses memory outside buffer. The bug existed also inside the format (%) processing, which was fixed with Bug 3441.
But there is still an invalid access, if we do not have any format inside the source string and the destination string is shorter than the format string. You can use any string for this test, as long it is longer than the buffer.
Example:
va_list argList;
char buffer[4];
SDL_vsnprintf(buffer, sizeof(buffer), "Testing", argList);
The bug is located on the 'else' branch of the format char test:
while (*fmt) {
if (*fmt == '%') {
...
} else {
if (left > 1) {
*text = *fmt;
--left;
}
++fmt;
++text;
}
}
if (left > 0) {
*text = '\0';
}
As you can see that text is always incremented, even when left is already one. When then on the last lines, *text is assigned the NULL char, the pointer is located outside bounds.
Intellectual Kitty
In SDL_video.c, on line #1756, in SDL_SetWindowPosition (from today's distribution, 12-31-2016, https://hg.libsdl.org/SDL/shortlog/bf19e0c84483):
if (displayIndex > _this->num_displays) {
should be:
if (displayIndex >= _this->num_displays) {
felix
Compiling even a simple SDL2 'hello world' program with gcc -Wstrict-prototypes (GCC 6.2.1) results in warnings like:
/usr/include/SDL2/SDL_gamecontroller.h:143:1: attention : function declaration isn't a prototype [-Wstrict-prototypes]
extern DECLSPEC int SDLCALL SDL_GameControllerNumMappings();
^~~~~~
It seems there is a missing 'void' between the parentheses.
This was a leftover of simplifying the resamplers down from autogenerated
code; I forgot to make something that the generator hardcoded into something
variable.
Fixes Bugzilla #3507.
Ozkan Sezer
http://hg.libsdl.org/SDL/rev/464a2676d8ab seems to have
forgotten removing the return from SDL_dynapi_procs.h, and this patch
does that. Without it, MSVC warns:
c:\sdl2\src\dynapi\SDL_dynapi_procs.h(598) : warning C4098:
'SDL_GL_SwapWindow_DEFAULT' : 'void' function returning a value
c:\sdl2\src\dynapi\SDL_dynapi_procs.h(598) : warning C4098:
'SDL_GL_SwapWindow' : 'void' function returning a value
Ozkan Sezer
This adds the name 'ad' to two unnamed unions in edid.h
and adjusts edid-parse.c for it. Nameless unions are not supported in
ancient gcc, which I happened to use on one of my ancient setups.
These fixes are lumped into two categories:
1. add new file, SDL_dataqueue.c, to UWP/WinRT build-inputs (via MSVC project
files)
2. implement a temporary, hack-fix for a build error in SDL_xinputjoystick.c.
Win32's Raw Input APIs are, unfortunately, not available for use in UWP/WinRT
APIs. There does appear to be a replacement API, available in the
Windows.Devices.HumanInterfaceDevice namespace.
This fix should be sufficient to get SDL compiling again, without affecting
Win32 builds, however using the UWP/WinRT API (in UWP/WinRT builds) would
almost certainly be better (for UWP/WinRT builds).
TODO: research Windows.Devices.HumanInterfaceDevice, and use that if and as
appropriate.
This currently doesn't affect absolute motion, which would need to be implemented on each windowing system so the cursor matches the reported mouse coordinates.
Diego
I was previously unaware that rotating the device to a different orientation when the keyboard is shown causes a keyboardWillHide followed by a keyboardWillShow notification. The previous patch would then mistakenly StopTextInput when rotating. This patch fixes that by checking if the device is rotating before stopping text input.
Ozkan Sezer
With rev. 10651, i.e. http://hg.libsdl.org/SDL/rev/747a6a795b21 ,
SDL2 - OS X builds fail to run on 10.6 (my setup: i686 / 10.6.8)
because the symbol _IOPMAssertionCreateWithDescription is missing.
The SDK listing it for 10.7+ does seem correct. Reverting r10651
and rebuilding makes it to function again.
Simon Hug
The SDL_BlitScaled function runs into an access violation for specific blit coordinates and surface sizes. The attached testcase blits a 800x600 surface to a 1280x720 surface at the coordinates -640,-345 scaled to 1280x720. The blit function that moves the data then runs over and reads after the pixel data from the src surface causing an access violation.
I can't say where exactly it goes wrong, but I think it could have something to do with the rounding in SDL_UpperBlitScaled. final_src.y is 288 and final_src.h is 313. Together that's 601, which I believe is one too much, but I just don't know the code enough to make sure that's the problem.
Sylvain
I think this patch fix the issue, but maybe it's worth re-writing "SDL_UpperBlitScaled" using SDL_FRect.
Sam Lantinga
Philipp Wiesemann
Brandon Schaefer
Ryan C. Gordon
Alex Szpakowski
Olli Kallioinen
Bastien Bouclet
Charlie Birks
Patrick Monaghan
Joshua Granick
Juha Kuikka
Drew Bliss
James Legg
David Ludwig
R?mi Verschelde
Jessica Stokes
Misty De Meo