AC_CHECK_HEADER() emits warnings when configuring for non-x86, because
the preprocessor check is OK but the compile check is not:
configure: WARNING: immintrin.h: present but cannot be compiled
configure: WARNING: immintrin.h: check for missing prerequisite headers?
configure: WARNING: immintrin.h: see the Autoconf documentation
configure: WARNING: immintrin.h: section "Present But Cannot Be Compiled"
configure: WARNING: immintrin.h: proceeding with the compiler's result
wahil1976
This patch adds a written-from-scratch WSCONS driver for OpenBSD. It does not have hardcoded keymaps, and it features mouse support when wsmux is available.
For this to work, it needs access to the /dev/wskbd* devices which are not available to non-root users by default. Access to those can be granted by changing /etc/fbtab to give the logging user the ownership of those devices.
.. by adding DBUS_CFLAGS and IBUS_CFLAGS to CPPFLAGS:
configure: WARNING: dbus/dbus.h: accepted by the compiler, rejected by the preprocessor!
configure: WARNING: dbus/dbus.h: proceeding with the compiler's result
configure: WARNING: ibus-1.0/ibus.h: accepted by the compiler, rejected by the preprocessor!
configure: WARNING: ibus-1.0/ibus.h: proceeding with the compiler's result
Patch from Matt Whitlock:
There are actually two distinct classes of problems at play here.
On the one hand, libsdl2's configure.ac has some POSIX conformance
issues - namely, the use of 'echo -n' and the passage of arguments
containing embedded backslashes to 'echo', neither of which is
defined by POSIX. The attached patch takes care of these issues.
Cameron Cawley
stdlib: Added SDL_round, SDL_roundf, SDL_lround and SDL_lroundf
The default implementation is based on the one used in the Windows RT video driver.
Substring
I was trying the KMSDRM video backend with some very simple programs that were working ok on 2.0.12. The same code won?t work on the current dev branch and I get:
DEBUG: check_modesetting: probing ?/dev/dri/card0?
DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6
DEBUG: check_modesetting: probing ?/dev/dri/card0?
DEBUG: /dev/dri/card0 connector, encoder and CRTC counts are: 4 5 6
DEBUG: KMSDRM_VideoInit()
DEBUG: Opening device /dev/dri/card0
DEBUG: Opened DRM FD (3)
DEBUG: no atomic modesetting support.
DEBUG: Video subsystem has not been initialized
INFO: Using SDL video driver: (null)
DEBUG: Video subsystem has not been initialized
After carefully checking, the radeon driver doesn?t support atomic modesetting. That?s not the only problem : the same happens with the amdgpu driver if we disable Display Core (kernel parameter amdgpu.dc=0, which is required to get analogue outputs working).
This is a major regression in the KMSDRM driver.
Using atomic mode setting is great, but having no fallback to the "standard KMS" is bad.
configure output is practically unchanged. there are still lots of
AC_TRY_COMPILE/AC_TRY_LINK replacements needed to really eliminate
the warnings, but that's for another time.
Alex S
Evdev headers aren't actually included in the base system (well, it has a private copy), they are available through the devel/evdev-proto port instead. We also have devel/libinotify and devel/libudev-devd shims, I didn't verify whether they work with SDL.
In recent versions of EGL headers on Linux, the MESA_EGL_NO_X11_HEADERS macro is
deprecated and has been replaced with EGL_NO_X11. As a result, the configure
script would fail the compilation check for EGL headers and disable EGL (and by
extension, Wayland) support when X11 headers are not installed. Fix this by
adding the correct macro to disable X11 support in the headers.
wahil1976
This patch adds the KBIO text input driver for FreeBSD, which allows text input to fully work without text spilling out into the console. It also supports accented input, AltGr keys and Alt Lock combinations.
Tested with US accent keys layout and various AltGr layouts.
Alex S
...which allows SDL to talk to webcamd/iichid. (Webcamd actually bundles quite a few gamepad drivers.) Note that this does _not_ disable usbhid, both joystick backends will be compiled.
This works on capability bitfields that can either come from udev or
from ioctls, so it is equally applicable to both udev and non-udev
input device detection.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This allows one to build Raspberry Pi versions on an ancient version of
Raspbian and get both the KMSDRM and RPI video targets built into SDL, giving
maximum binary compatibility from linking against an older glibc, etc, but
also making one library that can access video on all RPi models and OS
releases.
- SDL_config.h.in: add missing defines SDL_SENSOR_COREMOTION
and SDL_SENSOR_WINDOWS (configure did set SDL_SENSOR_WINDOWS
but it never went in SDL_config.h or Makefile.)
- SDL_config.h.cmake: remove duplicated SDL_SENSOR_XXX cmake
defines.
- autofoo, cmake: check for sensorsapi.h header before enabling
windows sensors.
jackmacwindowslinux
I'm testing my application that uses SDL2 on the new Apple Silicon Macs. I set up the SDL 2.0.12 source code from the website and tried to build it. The first issue I ran into was that it was always building OpenGL ES, even if --disable-video-opengles was passed to configure. OpenGL ES headers do not seem to be present on the Apple Silicon macOS SDK, except for the iOS SDK headers. Then I had problems with the joystick driver, where some classes used on iOS were not available on macOS.
After looking through the configure.ac script a bit, I found that iOS targets are selected when the build host matches "arm*-apple-darwin*". Clang on macOS 11.0 on arm64 reports the host as "arm64-apple-darwin20.0.0", which matches the iOS target. This means that ARM Mac compilation will always be detected as iOS. Unfortunately, there doesn't seem to be an easy way to detect Mac vs. iOS targets, since they now both use the same triplet & compiler for building.
I'm not sure what the best way to fix this is, but maybe there could be an additional target flag to specify whether to build for macOS or iOS? This might break compatibility, though: with this approach, either all old scripts that used configure to build for iOS fail, or all new builds on macOS without a flag fail (silently?).
The compiler understands it, but the "qcc" compiler driver doesn't, and the
standard Khronos headers upset QNX anyhow, since they try to include X11
headers in the __unix__ section.
If this is a problem, we can write a test for the compiler flag, but shouldn't
we _always_ use our Khronos headers instead of depending on the system...?
wengxt
Due to the new major fcitx version is coming close, the existing code need to be ported to use new Fcitx dbus interface.
The new dbus interface is supported by both fcitx 4 and 5, and has a good side effect, which is that it will work with flatpak for free. Also the patch remove the dependency on fcitx header. Instead, it just hardcodes a few enum value in the code so need to handle the different header for fcitx4 or 5.
A project being built entirely statically will call pkg-config with
--static, which utilises the Libs.private field. Conversely it will
not use --static when not being built entirely statically, even if
there is only a static build of SDL available. This will most likely
cause the build to fail due to underlinking unless we merge the Libs
fields.
This is what the Meson build system does when it generates pkg-config
files. This also also follows the behaviour of sdl2-config.
At the same time, the runtime linker flags are not applicable to
static-only builds so only add them for shared builds.
Apparently, recent versions of autotools will issue an error if an empty
description is supplied to AC_DEFINE(). Avoid these errors by just
adding a space in the square brackets.
Partially fixes Bugzilla #4908.
Ozkan Sezer
Christian Rauch
kenmays
Sam Lantinga
Cameron Cawley
Ryan C. Gordon
Nicolas Caramelli
Vanfanel
Frank Praznik
Cacodemon345
Joel Linn
Brian Kubisiak
Simon McVittie
James Le Cuirot
Paul Cercueil