At the time I contributed this unit test, SDL didn't understand Linux
touchpads, but now it does.
Fixes: 373216ae "Added support for touchpads in the Linux evdev code"
Signed-off-by: Simon McVittie <smcv@collabora.com>
Call SDL_RenderPresent after calling SDL_RenderReadPixels.
From "include/SDL_render.h":
"If you're using this on the main rendering target, it should be called after rendering and before SDL_RenderPresent()."
GLES2 always has them, and they work without hacks on Emscripten, unlike
client-side arrays.
I cleaned it up slightly, but this patch was mostly written by @bing2008.
Fixes#5258.
Case fallthrough warnings can be suppressed using the __fallthrough__
compiler attribute. Unfortunately, not all compilers have this
attribute, or even have __has_attribute to check if they have the
__fallthrough__ attribute. [[fallthrough]] is also available in C++17
and the next C2x, but not everyone uses C++17 or C2x.
So define the SDL_FALLTHROUGH macro to deal with those problems - if we
are using C++17 or C2x, it expands to [[fallthrough]]; else if the
compiler has __has_attribute and has the __fallthrough__ attribute, then
it expands to __attribute__((__fallthrough__)); else it expands to an
empty statement, with a /* fallthrough */ comment (it's a do {} while
(0) statement, because users of this macro need to use a semicolon,
because [[fallthrough]] and __attribute__((__fallthrough__)) require a
semicolon).
Clang before Clang 10 and GCC before GCC 7 have problems with using
__attribute__ as a sole statement and warn about a "declaration not
declaring anything", so fall back to using the /* fallthrough */ comment
if we are using those older compiler versions.
Applications using SDL are also free to use this macro (because it is
defined in begin_code.h).
All existing /* fallthrough */ comments have been replaced with this
macro. Some of them were unnecessary because they were the last case in
a switch; using SDL_FALLTHROUGH in those cases would result in a compile
error on compilers that support __fallthrough__, for having a
__attribute__((__fallthrough__)) statement that didn't immediately
precede a case label.
Case fallthrough warnings can be suppressed using the __fallthrough__
compiler attribute. Unfortunately, not all compilers have this
attribute, or even have __has_attribute to check if they have the
__fallthrough__ attribute. [[fallthrough]] is also available in C++17
and the next C2x, but not everyone uses C++17 or C2x.
So define the SDL_FALLTHROUGH macro to deal with those problems - if we
are using C++17 or C2x, it expands to [[fallthrough]]; else if the
compiler has __has_attribute and has the __fallthrough__ attribute, then
it expands to __attribute__((__fallthrough__)); else it expands to an
empty statement, with a /* fallthrough */ comment (it's a do {} while
(0) statement, because users of this macro need to use a semicolon,
because [[fallthrough]] and __attribute__((__fallthrough__)) require a
semicolon).
Applications using SDL are also free to use this macro (because it is
defined in begin_code.h).
All existing /* fallthrough */ comments have been replaced with this
macro. Some of them were unnecessary because they were the last case in
a switch; using SDL_FALLTHROUGH in those cases would result in a compile
error on compilers that support __fallthrough__, for having a
__attribute__((__fallthrough__)) statement that didn't immediately
precede a case label.
* SDLTest_CommonDrawWindowInfo: log SDL_RenderGetScale, SDL_RenderGetLogicalSize
* testwm2: fix video modes menu hit detection in High DPI cases
- also when logical size is specified, e.g.
`--logical 640x480 --resizable --allow-highdpi`
* add function to determine logical coordinates of renderer point when given window point
* change since to the targeted milestone
* fix typo
* rename for consistency
* Change logical coordinate type to float, since we can render with floating point precision.
* add function to convert logical to window coordinates
* testwm2: use new SDL_RenderWindowToLogical
* SDL_render.c: alternate SDL_RenderWindowToLogical/SDL_RenderLogicalToWindow
Co-authored-by: John Blat <johnblat64@protonmail.com>
Co-authored-by: John Blat <47202511+johnblat64@users.noreply.github.com>
There are two issues which are stopping the SDL tests from building on
my machine:
- libunwind is not being linked
- Even if it is, it is missing several symbols.
The first is fixed by having the test programs link against libunwind if
available. Technically, SDL2_test should be linking against it, as it's
used in SDL_test_memory.c, but as SDL2_test is a static library, it
can't itself import libunwind. We just assume that if it's present on
the system, we should link it directly to the test programs. This should
strictly be an improvement, as the only case where this'd fail is if
SDL2 was compiled when libunwind was present, but the tests are being
compiled without it, and that'd fail anyway.
The second is fixed by #define-ing UNW_LOCAL_ONLY before including
libunwind.h: this is required to make libunwind link to predicatable
symbols, in what can only be described as a bit of a farce. There are a
few more details in the libunwind man page, but the gist of it is that
it disables support for "remote unwinding": unwinding stack frames in a
different process (and possibly from a different architecture?):
http://www.nongnu.org/libunwind/man/libunwind(3).html
Note that I haven't tried this with CMake: I suspect that it'll work,
though, as the CMakeLists.txt seems to have SDL2 link against libunwind if
it's present. This adds an ugly extra dependency to SDL2, but does mean
that issue 1 isn't present. The UNW_LOCAL_ONLY change shouldn't be
build-system-specific.
The version with an implicit pattern rule tended to fail if test/
was built in an "out-of-tree" build directory not below test/, for
example:
cd SDL
mkdir _build-test
( cd _build-test; ../test/configure )
make -C _build-test
as a result of the pattern rule first checking for axis.bmp, then for
../test/axis.bmp, then ../test/../test/axis.bmp, and so on until the
maximum path length was reached.
Note that this requires GNU make. The FreeBSD ports file for SDL seems
to use GNU make (gmake) already, so presumably SDL's build system is
already relying on GNU make extensions.
Signed-off-by: Simon McVittie <smcv@debian.org>
AC_CONFIG_AUX_DIRS is an undocumented, internal version of
AC_CONFIG_AUX_DIR that takes a whitespace-separated list, instead of a
single path to add to the list. It also does not automatically treat
the given path as being relative to the $srcdir, unlike the documented
AC_CONFIG_AUX_DIR.
Newer versions of autoconf treat the argument to AC_CONFIG_AUX_DIRS
as being literal (they do not expand the shell variable), causing
autoreconf to fail if $srcdir is explicitly specified. The argument to
AC_CONFIG_AUX_DIR is checked relative to $srcdir anyway, so there is no
need to specify $srcdir a second time.
Resolves: https://github.com/libsdl-org/SDL/issues/4719
Signed-off-by: Simon McVittie <smcv@debian.org>
[--use-rendergeometry mode1|mode2]
mode1: Draw sprite2 as triangles that can be recombined as rect by software renderer
mode2: Draw sprite2 as triangles that can *not* be recombined as rect by software renderer
Use an 'indices' array
There were a few places throughout the SDL code where values were
clamped using SDL_min() and SDL_max(). Now that we have an SDL_clamp()
macro, use this instead.
On Wayland -- or at least on some Wayland implementations -- windows
aren't shown until something has been rendered into them. For the
'checkkeys' test program, this means that keyboard input isn't
registered, making the program rather useless.
By creating a renderer and presenting once, the window is properly
displayed, and the test behaves as it does under X11 (including
XWayland).
The exact same thing was done with testmessge in 1cd97e2695 (PR #4252)
SDL_Vulkan_GetDrawableSize() doesn't always return a size which is
within the Vulkan swapchain's allowed image extent range.
(This happens on X11 a lot when resizing, which is bug #3287)
Clamp the value we get back from SDL_Vulkan_GetDrawableSize() to this
range. Given the range usually is just a single value, this is almost
always equivalent to just using the min or max image extent, but this
seems logically most correct.
If you continually poll for events it's possible that new events can come in while you're still processing the last one, delaying rendering. This is more likely with high update rate sensors.
When possible use native os functions to make a blocking call waiting for
an incoming event. Previous behavior was to continuously poll the event
queue with a small delay between each poll.
The blocking call uses a new optional video driver event,
WaitEventTimeout, if available. It is called only if an window
already shown is available. If present the window is designated
using the variable wakeup_window to receive a wakeup event if
needed.
The WaitEventTimeout function accept a timeout parameter. If
positive the call will wait for an event or return if the timeout
expired without any event. If the timeout is zero it will
implement a polling behavior. If the timeout is negative the
function will block indefinetely waiting for an event.
To let the main thread sees events sent form a different thread
a "wake-up" signal is sent to the main thread if the main thread
is in a blocking state. The wake-up event is sent to the designated
wakeup_window if present.
The wake-up event is sent only if the PushEvent call is coming
from a different thread. Before sending the wake-up event
the ID of the thread making the blocking call is saved using the
variable blocking_thread_id and it is compared to the current
thread's id to decide if the wake-up event should be sent.
Two new optional video device methods are introduced:
WaitEventTimeout
SendWakeupEvent
in addition the mutex
wakeup_lock
which is defined and initialized but only for the drivers supporting the
methods above.
If the methods are not present the system behaves as previously
performing a periodic polling of the events queue.
The blocking call is disabled if a joystick or sensor is detected
and falls back to previous behavior.
On Wayland -- or at least on some Wayland implementations -- windows
aren't shown until something has been rendered into them. For the
'testmessage' test program, this means that the final messagebox (a
modal one) is blocking an "invisible window", which can then be
difficult to close.
By creating a renderer and presenting once, the window is properly
displayed, and the test behaves as it does under X11 (including
XWayland).
This adds SDL_SetWindowKeyboardGrab(), SDL_GetWindowKeyboardGrab(),
SDL_SetWindowMouseGrab(), SDL_GetWindowMouseGrab(), and new
SDL_WINDOW_KEYBOARD_GRABBED flag. It also updates the test harness to exercise
this functionality and makes a minor fix to X11 that I missed in
https://hg.libsdl.org/SDL/rev/02a2d609369b
To fit in with this new support, SDL_WINDOW_INPUT_CAPTURE has been renamed to
SDL_WINDOW_MOUSE_CAPTURE with the old name remaining as an alias for backwards
compatibility with older code.
SDL_SemPost() was called by the FIFO threads after the semaphore was
freed because the main thread actually synchronized on the
`writerRunning`/`readersRunning` count and not the semaphores itself.
Simon McVittie
capehill
Christoph Reichenbach
Ryan C. Gordon
Sylvain
Ozkan Sezer
IOBYTE
Sam Lantinga
Wouter Wijsman
Wouter Wijsman
Nate River
Cameron Gutman
Misa
Eric Wasylishen
Eddy Jansson
David Gow
Brick
Cameron Cawley
Simon McVittie
Lionel Landwerlin
Vladislav Dmitrievich Turbanov
Francesco Abbate
Christian Rauch
Vanfanel
Erik Yuzwa
Vladislav Dmitrievich Turbanov
Joel Linn