This was reproducible by running an SDL app on the console from an ssh login. In this case the terminal wasn't owned by the user running the app, so we were using the default keymap, which didn't have state transitions defined for ctrl and alt, so once we entered that state keypresses would no longer transition out of that state, nor would they generate text.
As a workaround, we'll just reset to the default shift state if that happens, which means we'll get text for keys pressed while ctrl is held down, but I don't think that's a big problem.
Note that in this case we also can't mute the keyboard, so the keypresses go to the console, which probably isn't what you want...
SDL_ExitProcess(), SDL_AbortAssertion() and SDLTest_BailOut().
(Commit 303c1e0fb0cf for bug #4100 removed SDL_NORETURN from
SDL_ExitProcess() and SDL_AbortAssertion() in order to avoid
warnings from windows builds, but that's temporary I guess..)
These are entirely untested
Several USB ids refer to multiple packaged products. In those cases I tried to use the most common name, or a general name (e.g. PS3 Controller), or a completely generic name (e.g. USB gamepad) if it wasn't clear what type of controller it was.
Patches welcome!
Expand SDLActivity::SDLSurface::surfaceChanged() callback to grab the panel width and height at the same time and pass that along to the native code. Only works on API 17+. Duplicates surface dimensions whenever it fails.
Add Android_DeviceWidth/Android_DeviceHeight globals to native code.
Disambiguate Android_ScreenWidth/Android_ScreenHeight -> Android_SurfaceWidth/Android_SurfaceHeight
Use device width/height for all display mode settings.
This means we have to consider SDL_WINDOW_MINIMIZED a window creation flag, but on non-windows platforms we just remove it and let the normal FinishWindowCreation re-apply and do the minimize as I have no idea what is right on them or if anything should change.
CR: Phil
Martin ?irokov
Launching an SDL application with SDL_AUDIODRIVER=jack, and then calling SDL_OpenAudioDevice() with whatever parameters fails with an error like this one:
SDL_OpenAudioDevice: Couldn't connect JACK ports: SDL:sdl_jack_output_0 => system:midi_playback_1
This happens because JACK_OpenDevice in src/audio/jack/SDL_jackaudio.c blindly tries to connect to all input ports without checking whether they are for audio or midi.
The fix is to check port types and ignore all non audio ports. Also I removed devports field from struct SDL_PrivateAudioData, because it's never really used and removing unused ports from it would be PITA.
Jona
The following explains why this bug was happening:
This crash was caused because the audio session was being set as active [session setActive:YES error:&err] when the audio device was actually being CLOSED. Certain cases the audio session being set to active would fail and the method would return right away. Because of the way the error was handled we never removed the SDLInterruptionListener thus leaking it. Later when an interruption was received the THIS_ object would contain a pointer to an already released device causing the crash.
The fix:
When only one device remained open and it was being closed we needed to set the audio session as NOT active and completely ignore the returned error to successfully release the SDLInterruptionListener. I think the user assumed that the open_playback_devices and open_capture_devices would equal 0 when all of them where closed but the truth is that at the end of the closing process that the open devices count is decremented.
(It gets upset at the -2147483648, thinking this should be an unsigned value
because 2147483648 is too large for an int32, so the negative sign upsets the
compiler.)
The concern is that a massive int sample, like 0x7FFFFFFF, won't fit in a
float32, which doesn't have enough bits to hold a whole number this large,
just to divide it to get a value between 0 and 1.
Previously we would convert to double, to get more bits, do the division, and
cast back to a float, but this is expensive.
Casting to double is more accurate, but it's 2x to 3x slower. Shifting out
the least significant byte of an int32, so it'll definitely fit in a float,
and dividing by 0x7FFFFF is still accurate to about 5 decimal places, and the
difference doesn't appear to be perceptable.
Fixes problems launching Firewatch on Linux (which statically links SDL but
also dynamically loads a system-wide copy from a plugin shared library) with
a newer SDL build.
The change makes sure that SDL_vsnprintf() nul terminates if it is
using _vsnprintf() for the job.
I made this patch for Watcom, whose _vsnprintf() doesn't guarantee
nul termination. The preprocessor check can be extended to windows
in general too, if required.
Closes bug #3769.
Daniel Gibson
Sorry, but it seems like Microsoft didn't fix the issue properly.
I just updated my Win10 machine, it now is Version 1803, Build 17134.1
I tested with SDL2 2.0.7 (my workaround was released with 2.0.8) and still got
lots of events that directly undid the prior "real" events - just like before.
(See simple testcase in attachement)
By default it sets SDL_HINT_MOUSE_RELATIVE_MODE_WARP - which triggered (and on my machine still triggers) the buggy behavior. You can start it with -raw, then it'll not set that hint and the events will be as expected.
The easiest way to see the difference is looking at the window title, which shows accumulated X and Y values: If you just move your mouse to the right, in -raw mode the number just increases. In non-raw mode (using mouse warping) it stays around 0.
I also had a WinAPI-only testcase: https://gist.github.com/DanielGibson/b5b033c67b9137f0280af9fc53352c68
It just calls SetCursorPos(320,240); on each WM_MOUSEMOVE event, and it also
logs all those events to a mouseevents.log textfile.
This log indeed looks a bit different since the latest Win10 update: It seems like all those events with x=320 y=240 do arrive - but only after I stopped moving the mouse - even though the cursor seems to be moved back every frame (or so).
So moving the mouse to the right gives X coordinates like
330, 325, 333, 340, 330, ...
and then when stopping movement I get lots of events with X coordinate 320
Olli-Samuli Lehmus
If one creates a window with the SDL_WINDOW_FULLSCREEN_DESKTOP flag, and creates a render target with SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "linear"), and afterwards sets SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "nearest"), after minimizing the window, the scale quality hint is lost on the render target. Textures however do keep their interpolation modes.
Christian Herzig
pthread_mutex_trylock() and by the way, pthread_mutex_lock() do not set errno.
Pthread-methods directly return error code as int. See related man-pages for
details.
Michael Sartain
This is a quick pass at adding Linux RealtimeKit thread priority support to SDL.
It allows me to bump the thread priority to high without root privileges or setting any caps, etc.
rtkit readme here:
http://git.0pointer.net/rtkit.git/tree/README
Simon Hug
I just wanted to fix a simple compiler warning in SDL_ShowMessageBox on Windows (which Sam fixed recently) and ended up finding some issues.
Attached patch fixes these issues:
- Because Windows only reports the lower 16 bits of the control identifier that was pushed, the button IDs used by SDL (C type int, most likely 32 bits) can get cut off.
- The documentation states (somewhat ambiguously) that the button ID will be -1 if the dialog was closed, but the current code sets 0. For SDL 2.1, I think this should be a return code of SDL_ShowMessageBox itself. That will free up the button ID and it seems a more appropriate place for signaling this event.
- Ampersands in controls will create mnemonics on Windows (underlined letters that, if combined with the Alt key, will push the button). I was thinking of adding a hint or flag to let the users enable it, but that might have unexpected results.
- When the size of the text gets calculated, it doesn't use the same parameters as the static control. This can cut off text or wrap it weirdly.
- On Windows, the Tab key is used to switch between control groups and sometimes between buttons in dialogs. This didn't seem to work correctly.
Attached patch also adds:
- Icons. Just the system ones that can be loaded with the ordinals IDI_ERROR, IDI_WARNING and IDI_INFORMATION.
- A button limit of 2^16 - 101.
- Some more specific error messages, but they never reach the user because how SDL_ShowMessageBox handles them if an implementation returns with an error.
This is commented out in SDLActivity.java, with the note #CURSORIMPLEENTATION because it requires API 24, which is higher than the minimum required SDK
Ozkan Sezer
The following patch defines _WIN32_WINNT_WIN7 if it is not already
defined in core/windows/SDL_windows.c, similar to what is already
there for _WIN32_WINNT_VISTA.
Eric Wasylishen
This bug was reintroduced by https://hg.libsdl.org/SDL/rev/fcf24b38a28a
The steps to reproduce are the same: run the "testrelative" SDL demo with "--info all",
connect a USB mouse with a scroll wheel, and roll the scroll wheel one "notch". You'll get log output like:
testdraw2[1644:67222] INFO: SDL EVENT: Mouse: wheel scrolled 0 in x and 0 in y (reversed: 1) in window 1
As far as I can tell macOS doesn't have an API for getting the number of "wheel notches"; I get a deltaY of 0.100006 for one "notch", and it's heavily accelerated (if you roll the wheel quickly you'll get large deltas). So NSEvent's deltaY is only meant to be used for scrolling a scroll view, with the given distance in points, not something like selecting an item in a game.
Here's a temporary patch that at restores the foor/ceil in Cocoa_HandleMouseWheel.
Not ideal, but at least it restores the ability to scroll one notch of a mousewheel.
Ozkan Sezer 2018-03-02 20:02:37 UTC
http://hg.libsdl.org/SDL/rev/d702b0c54e52 resulted in an error and
two warnings when compiled with mingw.
1. Error from SDL_windowstaskdialog.h:
In file included from src/video/windows/SDL_windowsmessagebox.c:29:0:
src/video/windows/SDL_windowstaskdialog.h:23:54: error: expected ')' before 'HWND'
This is fixed by removing unnecessary annotations:
2. Warning from SDL_assert.c:
src/SDL_assert.c: In function 'SDL_ExitProcess':
src/SDL_assert.c:138:1: warning: 'noreturn' function does return
Indeed ExitProcess() is prototyped with DECLSPEC_NORETURN, but
TerminateProcess() is not. This can be rectified by adding an
exit() call in there. Do NOTE, however, that requires building
with a libc:
3. Warning from SDL_windowsmessagebox.c:
src/video/windows/SDL_windowsmessagebox.c: In function 'WIN_ShowMessageBox':
src/video/windows/SDL_windowsmessagebox.c:513:9: warning: 'nCancelButton' may be used uninitialized in this function
My lazy solution was manually initializing nCancelButton to 0.
This lets the message box have an icon. Unless the app has opted-in to using
the v6 common controls, though, this will fall back to the usual SDL message
boxes.
"What I have done is use TerminateProcess rather than ExitProcess.
ExitProcess will cause Microsoft's leak detection to continue, TerminateProcess
won't. It is also technically wrong to use ExitProcess in the case of aborting
the application.
Jack Powell
Twitter @jack9267"
This tries to load vulkan.framework or libvulkan.1.dylib before MoltenVK.framework
or libMoltenVK.dylib. In the previous version, layers would not work for applications
run-time loading the default library.
Manuel Sabogal
If SDL is compiled with the Audio subsystem disabled there are some undefined references to the functions ANDROIDAUDIO_ResumeDevices and ANDROIDAUDIO_PauseDevices in the file src/video/android/SDL_androidevents.c.
With the previous change, I get:
1> Creating library C:\projects\SDL\VisualC\Win32\Debug\SDL2.lib and object C:\projects\SDL\VisualC\Win32\Debug\SDL2.exp
1>LINK : error LNK2001: unresolved external symbol __DllMainCRTStartup@12
Andreas Falkenhahn
In src/SDL.c there is this code:
_DllMainCRTStartup(HANDLE hModule,
...
The comment says that this is needed on Watcom C for some reason but why is it included then when building with Visual C as well? Shouldn't it be only included when compiling on Watcom C then?
I'm asking because this code caused me a lot of headaches because I'm building a DLL that contains SDL and I link using /MT and the _DllMainCRTStartup() symbol obviously led to lots of trouble but it wasn't clear to me where the problem was because all I got from the linker was:
LNK2019: unresolved external symbol _main referenced in function ___tmainCRTStartup
So I had to got through each and every object to see what the culprit was. See here for the full story:
https://stackoverflow.com/questions/25067151/lnk2019-unresolved-external-symbol-main-referenced-in-function-tmaincrtstar/48177067#48177067
So if it isn't necessary on Visual C, please just leave that symbol out on Visual C so that it no longer leads to any trouble. Thanks.
Most pthread functions return 0 on success and non-zero on error, but those
errors might be positive or negative, so checking for return values in the
Unix style, where errors are less than zero, is a bug.
Fixes Bugzilla #4039.
Callum McGing
This patch allows the user to disable the behaviour that blocks the compositor through a new hint: SDL_VIDEO_X11_NET_WM_BYPASS_COMPOSITOR. This allows tools or other windowed applications to behave properly under KWin.
cjacker
After updating from 2.0.5 to 2.0.7, Ibus not work anymore(fcitx still works).
Compare with 2.0.5, there are two issues in SDL_ibus.c.
1, SetupConnection always return SDL_FALSE in 2.0.7.
2, 'SetCapabilities' method should be called on 'ibus_conn'.
Patch attached.
Alexander Larsson
dbus_shutdown() is a debug feature which closes all global resources in the dbus library. Calling this should be done by the app, not a library, because if there are multiple users of dbus in the process then SDL could shut it down even though another part is using it.
For example, i had an issue with this in mGBA, which uses both Qt and SDL, both using libdbus. I had a session bus, but no system bus (this was in a flatpak sandbox), and when SDL_DBus_Init() failed to init the system bus it called dbus_shudown() and continued on. This caused issues for Qt when running due to its session bus connections having disappeared beneath it.
"*(void**)pfn = LoadAddress()" would cast the NULL pointer in pfn to a
void**, and then dereference it, which wasn't what we wanted. Replaced with
a clearer cast operation.
Viacheslav Slavinsky
SDL_rpivideo driver has 60 frames per second hardcoded in it, this is a problem for games that need to keep pace using VSYNC. I believe that I have found a solution to this. It is based on code in tvservice.c in rpi userland:
a1b89e91f3/host_applications/linux/apps/tvservice/tvservice.c (L433)
ayer.3d
I have a DualShock 4 v2 controller with a GUID that's not in the database. There is an existing GUID that is almost identical, with the only difference that I can tell being the reported version string (mine being 8001, database is 8100).
Existing GUID: 050000004c050000cc09000000810000
New GUID: 050000004c050000cc09000001800000
When connected via USB, the GUID matches an existing entry: 030000004c050000cc09000011810000
This is meant to be the desktop-enhanced version of wl_shell. Right now we
just match what the existing wl_shell code does, but there are other areas of
functionality available to us now, that we can fill in later.
This uses the "unstable" API, since this is what ships in Ubuntu 17.10 (as
part of Wayland 1.10), but Wayland 1.12 promotes this to stable with extremely
minor changes. We will add support for the stable version when it makes sense
to do so.
This variable can be set to the following values:
"0" - The indicator bar is not hidden (default for windowed applications)
"1" - The indicator bar is hidden and is shown when the screen is touched (useful for movie playback applications)
"2" - The indicator bar is dim and the first swipe makes it visible and the second swipe performs the "home" action (default for fullscreen applications)
SDL now builds with gcc 7.2 with the following command line options:
-Wall -pedantic-errors -Wno-deprecated-declarations -Wno-overlength-strings --std=c99
Anthony
This worked in 2.0.5 as normal, but stopped working in 2.0.7. The monitor's resolution doesn't change, a window is created in full screen mode at the virtual desktop resolution instead.
The EGL_GL_COLORSPACE_KHR is an attribute for eglCreate*Surface.
As written in EGL_KHR_gl_colorspace documentation:
Accepted as an attribute name by eglCreateWindowSurface,
eglCreatePbufferSurface and eglCreatePixmapSurface
EGL_GL_COLORSPACE_KHR 0x309D
(...)
A future SDL release will change the borderless window to act more like a normal window that happens to have no chrome, to support windows that draw their own chrome. In the meantime, those applications should set the "SDL_BORDERLESS_WINDOWED_STYLE" hint.
Ismael Ferreras Morezuelas (Swyter)
As a new year gift I have implemented the Windows version of SDL_GetWindowBordersSize(). I needed it for auto-selecting a cozy window size for the game I'm currently working on and noticed that it only worked under X11, so I thought it could be a good excuse to contribute back more stuff. The Mercurial patch is attached as a .diff file. Let me know what you think.
Happy 2018 to all the SDL2 devs and users!
--
PS: Keep in mind that Windows 10 includes the 8px invisible grip borders as part of the frame. There's a way of detecting if Aero/DWM is being used and ask only for the visible rect, but I believe that GetWindowRect() is doing that for a reason and working as intended, so I haven't changed it. (See [2])
References:
[1]: http://www.firststeps.ru/mfc/winapi/r.php?72
[2]: https://stackoverflow.com/a/34143777/674685
[3]: https://stackoverflow.com/a/431548/674685
[4]: https://wiki.libsdl.org/SDL_GetWindowBordersSize
- Use a single buffer for various non-changing constants accessed by the GPU, instead of multiple buffers.
- Do the half-pixel offset for points and lines using a transform matrix so we don't need a malloc when rendering.
- Don't add a half-pixel offset for other primitives and textures. This matches D3D and GL render behaviour.
- Remove the half-texel texture coordinate offset since it's not needed now that there's no more half-pixel position offset when rendering a texture.
- Don't try to set texture usage on iOS 8 since it doesn't exist there.
"GetVersionExA is deprecated in windows 8.1 and above's SDK, causing a warning
when building against the win10 SDK. Attached patch cleans up the usage for a
warning-free build.
GetVersionExA was being used to test to see if SDL was running on win9x or
winnt. A quick chat with Ryan on twitter suggested that SDL doesn't
officially support win9x anymore, so the call to this can be outright removed.
As an aside, replacing the call to GetVersionExA with VerifyVersionInfoA (the
recommended path) would have been pointless, as VerifyVersionInfoA only
supports VER_PLATFORM_WIN32_NT and doesn't officially support any other value
for dwPlatformId currently. (And it's probable that win9x SDKs didn't have
VerifyVersionInfo* in them anyway.)"
Fixes Bugzilla #4019.
Laurent Merckx
I have a problem with the SDL_ShowCursor method on Raspberry.
Depending on the context, my application hides or show the mouse cursor with SDL_ShowCursor.
But when calling SDL_ShowCursor(true), the cursor is displayed at 0,0 (and not at last position).
After debugging sources by myself, it seems that the problem is in SDL_rpimouse.c - RPI_ShowCursor:
vc_dispmanx_rect_set( &dst_rect, 0, 0, curdata->w, curdata->h);
should be
vc_dispmanx_rect_set( &dst_rect, mouse->x, mouse->y, curdata->w, curdata->h);
For me, it solves the problem.
tomwardio
HAVE_POLL is correctly defined in SDL_config.h when running configure. However, in the only place where it's used, it's undefined at the start of the file.
Dominik Reichardt
As discussed in 2012 the iOS onscreen keyboard hides when you hit RETURN (see https://discourse.libsdl.org/t/on-screen-keyboard-change/19216).
IMO this is a bad idea to not be able to influence this behavior and just recently this was fixed for Android by adding the hint SDL_HINT_ANDROID_RETURN_HIDES_IME in changeset 11768 6ce3bb5e38a5.
Eric wing
There is a tiny bug in the new overscan code for the SDL_renderer.
In SDL_renderer.c, line 1265, the if check for SDL_strcasecmp with "direct3d" needs to be inverted.
Instead of:
if(SDL_strcasecmp("direct3d", SDL_GetCurrentVideoDriver())) {
It should be:
if(0 == SDL_strcasecmp("direct3d", SDL_GetCurrentVideoDriver())) {
This bug causes the "overscan" mode to pretty much be completely ignored in all cases and all things remain letterboxed (as before the feature).
Elis?e Maurer
The attached minimal program sets the SDL_HINT_MOUSE_RELATIVE_MODE_WARP to 1, enables relative mouse mode then logs all SDL_MOUSEMOTION xrel values as they happen.
When moving the mouse exclusively to the right:
* On a Windows 10 installation before Fall Creators update (for instance, Version 10.0.15063 Build 15063), only positive values are reported, as expected
* On a Windows 10 installation after Fall Creators update (for instance, Version 10.0.16299 Update 16299), a mix of positive and negative values are reported.
3 different people have reproduced this bug and have confirmed it started to happen after the Fall Creators update was installed. It happens with SDL 2.0.7 as well as latest default branch as of today.
It seems like some obscure (maybe unintended) Windows behavior change? Haven't been able to pin it down more yet.
(To force-upgrade a Windows installation to the Fall Creators update, you can use the update assistant at https://www.microsoft.com/en-us/software-download/windows10)
Eric Wasylishen
Broken GetCursorPos / SetCursorPos based games on Win 10 fall creators are not limited to SDL.. I just tested winquake.exe (original 1997 exe) and it now has "jumps" in the mouse input if you try to look around in a circle. It uses GetCursorPos/SetCursorPos by default. Switching WinQuake to use directinput (-dinput flag) seems to get rid of the jumps.
Daniel Gibson
A friend tested on Win10 1607 (which is before the Fall Creators Update) and the the bug doesn't occur there, so the regression that SetCursorPos() doesn't reliably generate mouse events was indeed introduced with that update.
I even reproduced it in a minimal WinAPI-only application (https://gist.github.com/DanielGibson/b5b033c67b9137f0280af9fc53352c68), the weird thing is that if you don't do anything each "frame" (i.e. the mainloop only polls the events and does nothing else), there are a lot of mouse events with the coordinates you passed to SetCursorPos(), but when sleeping for 10ms in each iteration of the mainloop, those events basically don't happen anymore. Which is bad, because in games the each iteration of the mainloop usually takes 16ms..
I have a patch now that I find acceptable.
It checks for the windows version with RtlGetVersion() (https://msdn.microsoft.com/en-us/library/windows/hardware/ff561910.aspx) and only if it's >= Win10 build 16299, enables the workaround.
All code is in video/windows/SDL_windowsevents.c
and the workaround is, that for each WM_MOUSEMOVE event, "if(isWin10FCUorNewer && mouseID != SDL_TOUCH_MOUSEID && mouse->relative_mode_warp)", an addition mouse move event is generated with the coordinates of the center of the screen
(SDL_SendMouseMotion(data->window, mouseID, 0, center_x, center_y);) - which is exactly what would happen if windows generated those reliably itself.
This will cause SDL_PrivateSendMouseMotion() to set mouse->last_x = center_x; and mouse->last_y = center_y; so the next mouse relative mouse event will be calculated correctly.
If Microsoft ever fixes this bug, the IsWin10FCUorNewer() function would have to
be adjusted to also check for a maximum version, so the workaround is then disabled again.
Yuri K. Schlesner
When using texture filtering, there are filtering artifacts visible on the edges of scaled textures, where the texture filtering pulls in texels from the other side of the texture. Using clamping texture modes wouldn't completely fix this since source rectangles don't need to cover the whole texture. (See screenshot attached in next post.)
The opengl driver uses clamping on textures and so avoid this at least in the cases where the source rect is the whole texture. The direct3d driver does not and so has problems in every case. I'm not sure if it can actually completely be fixed, but at least enabling clamping for direct3d would be one step in the right direction.
This works better for games where there may be a bunch of simulation logic that needs to be run before the next rendering pass, and prevents blocking if the next drawable is busy.
This isn't complete, but is enough to run testsprite2. It's currently
Mac-only; with a little work to figure out how to properly glue in a Metal
layer to a UIView, this will likely work on iOS, too.
This is only wired up to the configure script right now, and disabled by
default. CMake and Xcode still need their bits filled in as appropriate.
XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout
was WinRT, which still needed it as its primary audio target until the WASAPI
code code be made to work.
The support matrix now looks like:
WinXP: directsound by default, winmm as a fallback for buggy drivers.
Vista+: WASAPI (directsound and winmm as fallbacks for debugging).
WinRT: WASAPI
Andrey
Seems latest google angle library successfully built & tested under macOS'es.
https://github.com/google/angle
We need to use GLES2 to implement true cross-platform code.
tomwardio
Proposed patch loads eglCreatePbufferSurface in same manner as other 1.1 functors. This allows custom video drivers to create pbuffer surfaces.
Manuel Alfayate Corchete
This fixes a problem with KMSDRM on some graphics hardware where only bigger cursor sizes are supported, such as current Intel gfx. (The kernel-side driver is what limits this: had to look for failing IOCTLs...)
That caused SDL_SetCursor() to fail silently, and we were left with a missing cursor without further explanation.
With this patch, different "standard" sizes are tried and a bigger one is used (with an intermediate and clean buffer only used to write the new cursor to the BO where it will live after) if we get, let's say, 16x16 which is pretty common but our hardware does not support that.
Vitaly Novichkov
Once I ran build of my codecs collection on AppVeyor where my CMake script downloads latest SDL2 from HG repo, failed to link because of math functions conflict:
https://ci.appveyor.com/project/Wohlstand/audiocodecs/build/1.0.44
The revision is b9ff5f8b2303
There are both vanilla MinGW and MinGW-w64 are failed to build.
```
[100%] Linking C shared library libSDL2.dll
c:/mingw/bin/../lib/gcc/mingw32/5.3.0/../../../libmingwex.a(scalbn.o):(.text+0x0): multiple definition of `scalbln'
CMakeFiles\SDL2.dir/objects.a(s_scalbn.c.obj):C:/projects/audiocodecs/build-MinGW-Release-Win32/external/SDL2/src/SDL2HG/src/libm/s_scalbn.c:30: first defined here
C Snover
SDL_AddDisplayMode returns an SDL_bool corresponding to whether or not the given display mode was added or not. It will return SDL_FALSE if a matching display mode already exists in the display's list of display modes, which causes ownership of the mode driverdata to remain with the caller. Some video drivers ignore the return value of SDL_AddDisplayMode, so leak the driverdata memory when SDL_AddDisplayMode returns SDL_FALSE.
raist66676
Here is the bug in latest SDL 2.0.8 development repo. It is obvious and simple to fix by correcting typos on six lines of code.
In src/video/SDL_yuv.c on lines 217, 249, 280, 321, 353, and 384 the wrong conversion functions are called for SDL_PIXELFORMAT_ABGR8888 and SDL_PIXELFORMAT_BGR888. Instead of ABGR functions, BGRA functions are called. These are typos.
New functions get and set the YUV colorspace conversion mode:
SDL_SetYUVConversionMode()
SDL_GetYUVConversionMode()
SDL_GetYUVConversionModeForResolution()
SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats.
Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
Alex Szpakowski <slime73@gmail.com> 2017-07-12 21:28 -0300
macOS: Expose more display modes on retina screens. Fixes an issue found in BZFlag.
http://hg.libsdl.org/SDL/rev/cfb3ddf796c3
Alex Szpakowski <slime73@gmail.com> 2017-07-12 21:32 -0300
Fix a potential crash in macOS 10.7 and earlier.
http://hg.libsdl.org/SDL/rev/4941c8867075
tomwardio
Remove static int vm_error and vm_event, use local variables instead.
This fixes unused variable errors when compiling with SDL_VIDEO_DRIVER_X11_XINERAMA undefined.
src/video/x11/SDL_x11modes.c:505:22: error: unused variable 'vm_error' [-Werror,-Wunused-variable]
src/video/x11/SDL_x11modes.c:505:12: error: unused variable 'vm_event' [-Werror,-Wunused-variable]
tomwardio
Add support to be able to set EGL_SURFACE_TYPE bits when creating an EGL config. This is usefule when wanting to create pixel buffer surfaces in custom video drivers.
Alexander Orefkov
In src\joystick\android\SDL_sysjoystick.c in SDL_SYS_JoystickDetect when SDL_GetTicks return number grater 2147483648 (after 24.85 days uptime) SDL_TICKS_PASSED(SDL_GetTicks(), timeout) return FALSE and Android_JNI_PollInputDevices is never calling.
And in JoystickByDeviceId - when search for newly added joystic - after SDL_SYS_JoystickDetect item not reinitilized, and always stay NULL, cause return NULL instead of added joystick.
Changing the background color causes the titlebar to blend against it on
modern macOS releases, making all SDL windows look wrong by default. This was
set to make the window not flash white before a GL context is ready, but we
can accomplish this in our window's view's drawRect implementation, too.
Manuel
I noticed that, at least on Intel GPU hardware, passing SDL_RENDERER_PRESENTVSYNC would result on a static console instead of the program graphics.
That was due to the fact that calling drmModePageFlip() only works if we have previously set up CRTC to one of the GBM buffers with a drmModeSetCrtc() call, so now it's done and things work as expected.
The KMSDRM_GLES_SetupCrtc() call is done only one time, only when needed (when egl_swapinterval is not 0: when it's 0, there's no need for it because we flip by calling drmModePageFlip() anyway).
The place where KMSDRM_GLES_SetupCrtc() call is done may look strange, but it's right: it needs EGL completely ready because it needs to call eglSwapBuffers() internally to work (see more comments about it in the code).
Simon Hug
Patch that adds [-1, 1] clamping to the scalar audio type conversions.
This may come from the SDL_Convert_F32_to_X_Scalar functions. They don't clamp the float value to [-1, 1] and when they cast it to the target integer it may be too large or too small for the type and get truncated, causing horrible noise.
The attached patch throws clamping in, but I don't know if that's the preferred way to fix this. For x86 (without SSE) the compiler (I tested MSVC) seems to throw a horrible amount of x87 code in it. It's a bit better with SSE, but probably still quite the performance hit. And SSE2 uses a branchless approach with maxss and minss.
Carlos
Angle supports GLES3 but when using these functions (SDL_CreateWindow and SDL_CreateRenderer), defaults again to GLES2.0.
A current workaround (hack) to retrieve a GLES3.0 context with Angle is:
1) set
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 3);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0);
after InitSDL AND after calling SDL_CreateWindow (before SDL_CreateRenderer)
2) Comment lines 2032-2044 in SDL_render_gles2.c, funtion GLES2_CreateRenderer
window_flags = SDL_GetWindowFlags(window);
if (!(window_flags & SDL_WINDOW_OPENGL) ||
profile_mask != SDL_GL_CONTEXT_PROFILE_ES || major != RENDERER_CONTEXT_MAJOR || minor != RENDERER_CONTEXT_MINOR) {
changed_window = SDL_TRUE;
SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, RENDERER_CONTEXT_MAJOR);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, RENDERER_CONTEXT_MINOR);
if (SDL_RecreateWindow(window, window_flags | SDL_WINDOW_OPENGL) < 0) {
goto error;
}
}
This retrives a GLES3 context as confirmed using glGetString(GL_VERSION). This should be fixed by modifying a few if's.
Ozkan Sezer
Since changeset 11607:60cd425a2f14, I am getting the following
error upon quit. Running testsprite2, clicking the mouse, and
quiting it is enough to trigger it. This is on my old Fedora9
x86-Linux:
X Error of failed request: BadCursor (invalid Cursor parameter)
Major opcode of failed request: 2 (X_ChangeWindowAttributes)
Resource id in failed request: 0xb057340
Serial number of failed request: 905
Current serial number in output stream: 906
Reverting https://hg.libsdl.org/SDL/rev/60cd425a2f14 removes
the error.
The audioqueue thread needs to keep running, and processing the CFRunLoop
until the AudioQueue is disposed of, otherwise CoreAudio will hang waiting for
final data to feed the device.
At least, I think this is how it all works. It definitely fixes the bug here!
Since AudioQueueDispose() calls AudioQueueStop() internally, there's no need
for our thread to handle this, either, which is good because the AudioQueue
would be disposed by this point. So now the AudioQueue is disposed first, and
then our thread is joined, and everything works out okay.
Just in case, we mark the device "paused" before setting everything in motion,
so any further callbacks from CoreAudio will write silence and not fire the
app's audio callback again.
Fixes Bugzilla #3868.
Trent Gamblin
The documentation for SDL_TouchFingerEvent says that the x and y coordinates are normalised between 0-1. I've found that to be true on Windows, Android and iOS but on X11 they are in pixel coordinates. This patch fixes the issue. This was the cleanest way I could do it with what was available without changing things around a lot but you may know a better way.
(I thought padding size ranged from 5 frames to ~30 frames (based around
RESAMPLER_ZERO_CROSSINGS, which is 5), but it's actually between 512 and
several thousands (based on RESAMPLER_SAMPLES_PER_ZERO_CROSSING)). It gets
big fast when downsampling.
Manuel
I would like this small patch merged that adds support for my GreenAsia Inc. PSX to USB converter, so SDL_IsGameController() returns true when using this adaptor.
It's interesting because PSX/PS2 controllers connected using this model won't be detected as gamecontrollers otherwise, only as joysticks.
Sylvain
There are various YUV-RGB conversion coefficients, according to https://www.fourcc.org/fccyvrgb.php
I choose the first (from Video Demystified, with integer multiplication),
but the current SDL2 Dither functions use in fact the next one, which follows a specifications called CCIR 601.
Here's a patch to use the second ones and with previous warning corrections.
There are less multiplications involved because Chroma coefficient is 1.
Also, doing float multiplication is as efficient with vectorization.
In the end, the YUV decoding is faster: ~165 ms vs my previous 195 ms.
Moreover, if SDL2 is compiled with -march=native, then YUV decoding time drops to ~130ms, while older ones remains around ~220 ms.
For information, from jpeg-9 source code:
jpeg-9/jccolor.c
* YCbCr is defined per CCIR 601-1, except that Cb and Cr are
* normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
* The conversion equations to be implemented are therefore
* Y = 0.29900 * R + 0.58700 * G + 0.11400 * B
* Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B + CENTERJSAMPLE
* Cr = 0.50000 * R - 0.41869 * G - 0.08131 * B + CENTERJSAMPLE
jpeg-9/jdcolor.c
* YCbCr is defined per CCIR 601-1, except that Cb and Cr are
* normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
* The conversion equations to be implemented are therefore
*
* R = Y + 1.40200 * Cr
* G = Y - 0.34414 * Cb - 0.71414 * Cr
* B = Y + 1.77200 * Cb
Sylvain
Few issues with YUV on SDL2 when using odd dimensions, and missing conversions from/back to YUV formats.
1) The big part is that SDL_ConvertPixels() does not convert to/from YUV in most cases. This now works with any format and also with odd dimensions,
by adding two internal functions SDL_ConvertPixels_YUV_to_ARGB8888 and SDL_ConvertPixels_ARGB8888_to_YUV (could it be XRGB888 ?).
The target format is hard coded to ARGB888 (which is the default in the internal of the software renderer).
In case of different YUV conversion, it will do an intermediate conversion to a ARGB8888 buffer.
SDL_ConvertPixels_YUV_to_ARGB8888 is somehow redundant with all the "Color*Dither*Mod*".
But it allows some completeness of SDL_ConvertPixels to handle all YUV format.
It also works with odd dimensions.
Moreover, I did some benchmark(SDL_ConvertPixel vs Color32DitherYV12Mod1X and Color32DitherYUY2Mod1X).
gcc-6.3 and clang-4.0. gcc performs better than clang. And, with gcc, SDL_ConvertPixels() performs better (20%) than the two C function Color32Dither*().
For instance, to convert 10 times a 3888x2592 image, it takes ~195 ms with SDL_ConvertPixels and ~235 ms with Color32Dither*().
Especially because of gcc vectorize feature that optimises all conversion loops (-ftree-loop-vectorize).
Nb: I put no image pitch for the YUV buffers. because it complexify a little bit the code and the API :
There would be some ambiguity when setting the pitch exactly to image width:
would it a be pitch of image width (for luma and chroma). or just contiguous data ? (could set pitch=0 for the later).
2) Small issues with odd dimensions:
If width "w" is odd, luma plane width is still "w" whereas chroma planes will be "(w + 1)/2". Almost the same for odd h.
Solution is to strategically substitute "w" by "(w+1)/2" at the good places ...
- In the repository, SDL_ConvertPixels() handles YUV only if yuv source format is exactly the same as YUV destination format.
It basically does a memcpy of pixels, but it's done incorrectly when width or height is odd (wrong size of chroma planes). This is fixed.
- SDL Renderers don't support odd width/height for YUV textures.
This is fixed for software, opengl, opengles2. (opengles 1 does not support it and fallback to software rendering).
This is *not* fixed for D3D and D3D11 ... (and others, psp ?)
Only *two* Dither function are fixed ... not sure if others are really used.
- This is not possible to create a NV12/NV12 texture with the software renderer, whereas other renderers allow it.
This is fixed, by using SDL_ConvertPixels underneath.
- It was not possible to SDL_UpdateTexture() of format NV12/NV21 with the software renderer. this is fixed.
Here's also two testcases:
- that do all combination of conversion.
- to test partial UpdateTexture
Aaron
As of 2.0.6, all of my games are failing with the following error:
process 31778: arguments to dbus_type_is_basic() were incorrect, assertion "dbus_type_is_valid (typecode) || typecode == DBUS_TYPE_INVALID" failed in file dbus-signature.c line 322.
This is normally a bug in some application using the D-Bus library.
D-Bus not built with -rdynamic so unable to print a backtrace
(patch by Ozkan Sezer)
Evgeny Kapun
Commit 490bb5b49f11 [1], which was a fix for bug #3790, introduced a new bug: now, calling SDL_FreeSurface(surface) deallocates surface->map even if there are other references to the surface. This is bad, because some functions (such as SDL_ConvertSurface) assume that surface->map is not NULL.
Robert Turner
SDL_windowsevents.c contains code to retrieve the x and y coordinate for a requested hit test. It does this as follows:
POINT winpoint = { (int) LOWORD(lParam), (int) HIWORD(lParam) };
LOWORD(lParam) does not correctly mask off high bits that are set if the point is on a second (or third, etc.) monitor. This effectively offsets the x-coordinate by a large value.
MSDN documentation suggests that LOWORD() and HIWORD() are the wrong macros for the task, instead suggesting we should be doing something like the following:
POINT winpoint = { GET_X_LPARAM(lParam), GET_Y_LPARAM(lParam) };
Testing this change on my Windows 10 machine with 2 monitors gives the correct results.
- Fixing rendering borderless window. Need to force windows to send a WM_NCCALCSIZE then return 0 for non-client area size.
- Adding WS_CAPTION | WS_SYSMENU | WS_MINIMIZEBOX to borderless windows, for reasons noted in comments.
- Fix SetupWindowData() setting SDL_WINDOW_BORDERLESS. This was being cleared at window creation, causing hanlding for the first WM_NCCALCSIZE message to fail
Previously, the padding was silence, which was a problem when streaming since
you would sample a little bit of this silence between each buffer.
We still need a means to get padding data for the right hand side, but this
patch makes the resampler output more correct.
Anthony
This is what's making the software renderer crash with rotated destination rectangles of w or h = 0:
SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "2");
This time it's using real math from a real whitepaper instead of my previous
amateur, fast-but-low-quality attempt. The new resampler does "bandlimited
interpolation," as described here: https://ccrma.stanford.edu/~jos/resample/
The output appears to sound cleaner, especially at high frequencies, and of
course works with non-power-of-two rate conversions.
There are some obvious optimizations to be done to this still, and there is
other fallout: this doesn't resample a buffer in-place, the 2-channels-Sint16
fast path is gone because this resampler does a _lot_ of floating point math.
There is a nasty hack to make it work with SDL_AudioCVT.
It's possible these issues are solvable, but they aren't solved as of yet.
Still, I hope this effort is slouching in the right direction.
This would cause playback problems in certain situations, such as on the
Raspberry Pi. The device that the wait was added for seems to not benefit from
it in modern times, and standard desktop Linux seems to do the right thing
when a USB device is unplugged now, without this patch.
Fixes Bugzilla #3599.
Andreas Falkenhahn
My app opens a 640x480 window. When I click on the window's maximize button, the window correctly fills the entire screen and loses its borders. But clicking on the restore button now doesn't restore the window to its original 640x480 size. Instead, the window size is identical to the screen size now. The only difference to the previous state is that the window now has borders again but it isn't restored to 640x480.
bastien.bouclet
The window is now resized to its specified size, but it moves to the top left corner of the screen. That is unexpected because neither the user nor the program moved it there. Test program attached (the same one as before).
Simon Hug
When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug.
The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros.
It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config.
And there's an additional error message for when ftell fails.
Andreas Falkenhahn
When compiling SDL for the Raspberry Pi, I have to use the --host parameter to enable compilation of the native Raspberry Pi video driver, like so:
--host=arm-raspberry-linux-gnueabihf
It took me a while to figure out that this was necessary in order to have the native Raspberry Pi video driver compiled in. I think it would be better if there was an option like --enable-video-rpi that could be passed to configure and that would also show up when saying configure --help. Currently, it?s rather difficult to figure out that you have to use the --host parameter with arm-raspberry-linux-gnueabihf in order to get Raspberry Pi video support. It?s also somewhat inconsistent because most other video drivers can in fact be enabled/disabled through specific configure parameters but there is no such parameter for the native Raspberry Pi video driver.
Simon Hug
These are the remaining compiler warnings I see in the current tip cb049cae7c3c.
- SDL_test_log.c defines _CRT_SECURE_NO_WARNINGS without checking if it was already set.
- SDL_windowskeyboard.c converts integers to pointers without going over the (U)INT_PTR types. That bothers MSVC.
Now we try the new (hardware-specific) pathnames first, and if those fail to
load, we'll try the more generic names that earlier versions of Raspbian used.
Fixes Bugzilla #3800.
Mart?n Golini
I'm having a very slow initialization of the video subsystem that locks the window creation for about 500 ms ( tested in at least 4 different systems ). What i found is that X11_InitModes_XRandR is using XRRGetScreenResources, that explicitly ask to poll the hardware for changes. This is not really necessary since if the data is already available you can use XRRGetScreenResourcesCurrent.
I attached a tentative patch that fix this issue. With the patch there's no lock when the subsystem is initialized and the window creation is instant in my applications. The patch only uses XRRGetScreenResourcesCurrent in X11_InitModes_XRandR but it could be potentially used in X11_GetDisplayModes and X11_SetDisplayMode.
bastien.bouclet
When creating two surfaces and blitting them onto the other, SDL's internal reference counting fails, and one of the surfaces is not freed when calling SDL_FreeSurface.
Example code :
SDL_Surface *s1 = SDL_CreateRGBSurfaceWithFormat(0, 640, 480, 32, SDL_PIXELFORMAT_ARGB8888);
SDL_Surface *s2 = SDL_CreateRGBSurfaceWithFormat(0, 640, 480, 32, SDL_PIXELFORMAT_ARGB8888);
SDL_BlitSurface(s1, NULL, s2, NULL);
SDL_BlitSurface(s2, NULL, s1, NULL);
SDL_FreeSurface(s2);
SDL_FreeSurface(s1);
With this example, s1 is not freed after calling SDL_FreeSurface, its refcount attribute is still positive.
This also seems to fix the follow-up issue in bug #3719, whereby the initial fix caused the SDL window to move, after transitioning from fullscreen to windowed-mode
This is necessary because the Raspberry Pi is a strange beast, that believes
it has OpenGL support (through glX?) but generally has GLES2 support.
So when using the raspberry video target, we need to force this to default
to a GLES2 context, or by default SDL_CreateWindow() will fail, deep down
when it tries to load the proper GL library.
Fixes testsprite2 (and basically everything else that wasn't testgles2) when
run on a Raspberry Pi without a X server.
Please note that other targets might also need this filled in, the Raspberry
Pi is just the most prominent and readily-available System-On-A-Chip style
thing on my desk. :)
Romain Tisserand
Using KMS/DRM driver from WIP SDL2.0.6 on Linux/ARM SoC RockChip RK3328 (ARM Mali 450 MP2 GPU).
The current code is using GBM_BO_FORMAT_XRGB8888 as GBM buffer format specifier.
The Mali driver (it has been confirmed some other vendor implementations too) expects GBM_FORMAT_XRGB8888.
The Mesa implementation is actually handling both values as the same, but it's not implemented like this into every gbm.h vendor header.
https://github.com/ideak/mesa/blob/master/src/gbm/backends/dri/gbm_dri.c
So with stock SDL2 on my card (Mali vendor implementation), it does not work, eglCreateWindowSurface fails, and gbm_is_format_supported fails too (with the BO variant).
It runs fine with GBM_FORMAT_XRGB8888.
Here is a link of the gbm.h from Mali user-space driver :
https://github.com/rockchip-linux/libmali/blob/rockchip/include/gbm.h
This is necessary because we need to see if GLES compat extensions exist.
All of this code (including ShouldUseTextureFramebuffer()) should be
revisited after 2.0.6 ships; ideally we don't make throwaway contexts if
we can avoid it...but maybe we can't. I hear Vulkan is pretty cool.
Fixes Bugzilla #3725.
benjamin.feng
Probable underlying cause: https://bugzilla.libsdl.org/show_bug.cgi?id=3124#c5
"If you download and build the HID Calibrator sample you can see that these are totally legitimate HID devices (except for inverting the Y-axis of joysticks, which is contrary to the HID specification but does make them more compatible with games compiled expecting XBOX controllers)."
Colin Barrett
Using the pre-built x86 devel libs from here:
https://www.libsdl.org/release/SDL2-devel-2.0.5-VC.zip
If I have:
SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 2);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_FLAGS, SDL_GL_CONTEXT_DEBUG_FLAG);
and I'm using ANGLE/(a GL driver that doesn't provide an ES2 context) such that SDL_EGL_CreateContext is called by SDL_GL_CreateContext, I get the error "Could not create EGL context (context attributes are not supported)" and no context is created.
Looking at the code in SDL_EGL_CreateContext - if gl_config.flags is non-zero, it looks like the code in the section guarded with "#ifdef EGL_KHR_create_context" should be executed - but it apparently isn't.
Is it possible this section hasn't been compiled into the pre-built libraries? If I build SDL2.dll myself using the Visual C++ solution (VS2015 Community Update 3) then the call succeeds as I expect
bastien.bouclet
When exiting a "fullscreen space" on OS X, windows don't go to their defined "windowed mode size", but go back to their previous size.
Steps to reproduce:
1. Create a windowed mode SDL window
2. Toggle it to fullscreen with the SDL_WINDOW_FULLSCREEN_DESKTOP flag
3. While in fullscreen, change the windowed mode size using SDL_SetWindowSize
4. Toggle the window back to windowed mode
Expected result:
- The window has the size specified during step 3.
Actual result:
- The window has the size specified when creating the window in step 1.
Attached is a minimal reproduction test case.
The attached test case works as expected on X11 and Windows.
Ozkan Sezer
fix windows build after revision 11382: commit 2026e42e377a renamed
_SDL_msctf_h to SDL_msctf_h_ . SDL_windowskeyboard.c relies on that
macro, so update it accordingly.
Ozkan Sezer
Since the Vulkan merge, building against a Mac OS X SDM older than
10.11 fails in SDL_cocoametalview.m because Metal.framework is not
present. There is no conditional compiling in SDL_cocoametalview.m
either, so --disable-video-vulkan doesn't help with anything. (The
configury doesn't check darwin for x86_64 either, but it's another
story.)
I cross-build against 10.8 SDK on linux using clang-3.4.2 and this
is a problem for me. Will this be fixed?
Simon Hug
This issue actually raises the question if this API change (requirement of initialized audio subsystem) is breaking backwards compatibility. I don't see the documentation saying it is needed in 2.0.5.
"Major changes, roughly in order of appearance:
- Use float math everywhere, instead of promoting to double and casting back
all the time.
- Conserve sound energy when downmixing any channel into two other channels.
- Add a QuadToStereo filter. (The previous technique of reusing StereoToMono
never worked, since it assumed an incorrect channel layout for 4.0.)
- Add a 71to51 filter. This removes just under half of the cases the previous
code would silently break in.
- Add a QuadTo51 filter. More silent breakage fixed.
- Add a 51to71 filter, removing another almost-half of the silently broken
cases.
- Add 8 to the list of values SDL_SupportedChannelCount will accept.
- Change SDL_BuildAudioCVT's channel-related logic to handle every case, and
to actually fail if it fails instead of silently corrupting sound data and/or
crashing down the road."
(Note that SDL doesn't otherwise support 7.1 audio yet, but hopefully it will
soon and the 7.1 converters are an important piece of that. --ryan.)
Fixes Bugzilla #3727.
David Brady
When I attempted to make a mapping file for Android gamepads, I quickly discovered that most of the ones that I have here show up as the same device (Broadcom Bluetooth HID), meaning that it was impossible to make mappings on Android, since every device looked the same.
This patch will check for the existence of the getDescriptor function added in Jelly Bean, and use it if it's there. The Android Dashboard says that the majority of Android phones should support this function, and doing it this way will not force us to bump up our API version.
Clayton Craft
The default path used by directfb for libGL is different than the default path used by x11 in SDL2:
./src/video/directfb/SDL_DirectFB_opengl.c:
path = "libGL.so";
./src/video/x11/SDL_x11opengl.c:
#define DEFAULT_OPENGL "libGL.so.1"
On at least one distro (Alpine Linux), libGL.so is not created (or more accurately the symlink to libGL.so.1 is not created). For consistency, the 'path' variable in SDL_DirectFB_opengl.c should patch the DEFAULT_OPENGL in SDL_x11opengl.c ("libGL.so.1")
Error message was:
[mvk-info] MoltenVK version 0.18.2. Vulkan version 1.0.51.
[***MoltenVK ERROR***] VK_ERROR_INITIALIZATION_FAILED: On-screen rendering requires a view that is backed by a layer of type CAMetalLayer.
2017-08-28 02:17:29.579 testvulkan[95627:1716939] ERROR: SDL_Vulkan_CreateSurface(): vkCreateMacOSSurfaceMVK failed: VK_ERROR_INITIALIZATION_FAILED
David Ludwig
I've created a new set of patches. I am happy to create more, if it would help.
One version only copies 'size'.
A second version copies both 'size' and 'silence'. When looking over the documentation for SDL_OpenAudio in SDL_audio.h, it mentioned that both 'size' and 'silence' were things that SDL_OpenAudio would calculate.
Regarding *both* patches, I did notice that SDL 1.2 appears to have always modified desired's size and silence fields. The SDL wiki, at https://wiki.libsdl.org/SDL_OpenAudio#Remarks , does note:
Carlos
We would like to add a switch (define) that allows us to compile Angle statically with SDL. That is, getting rid of the OpenGL DLL. Usually you need OpenGL to be loaded dynamically as DLL because implementation is provided by the system but no need with Angle.
Only 2 files need modification and it shouldn't affect current behaivor:
include/SDL_egl.h and src/video/SDL_egl.c, as in here
https://github.com/native-toolkit/sdl/pull/10/files
The flag name could be SDL_VIDEO_STATIC_ANGLE (instead of NATIVE_TOOLKIT_STATIC_ANGLE) as discussed here https://github.com/native-toolkit/sdl/pull/10
We have tested this with both Windows and UWP, using NME engine (https://github.com/haxenme/nme).
Releated issue: https://bugzilla.libsdl.org/show_bug.cgi?id=1820
Sylvain
Hi! here's a patch for that with two class loaded regarding API level.
Test both case : before API 11 and after.
I also remove now unused GetSystemServiceFromUIThread() and minor clean-up (haptic warning prototype).
This fixes a strange corner case (notes appended below), and should be
safe to do anyhow.
Fixes Bugzilla #3674.
"I did more tests.
It appears the bug only happens if there is
another window on the screen that has "always
on top" property. For me it is xawtv - it is
always opened in a screen corner. Closing
xawtv or removing "always on top" property
from it makes the problem to go away.
Plus, it doesn't appear like the buttons are
not delivered at all. It appears that instead
the button presses are delivered on some mouse
positions, but not delivered when you move the
mouse to other part of the window... So this is
really weird and is likely somewhere deep in the
Xorg.
Maybe somehow it happens that the cursor is
actually above the xawtv window, but, because
my app uses grab, it is not visible there, and
in that case the events are not delivered to
my app?
But with my patch the button events are
always delivered flawlessly, it seems.
Hmm, and that indeed seems to explain my problem:
if the mask is set properly and my app uses
grab, then, even if the mouse is above some
other window, the events would still be delivered
to the grabbing app, which is what actually wanted
because my app uses relative mouse mode, so it
doesn't know the pointer can cross some other window
(my app draws the pointer itself).
So my current theory is that my patch only enforces
the mouse grab, which otherwise can be tricked by
some other window preventing the button events
delivery (but motion events are still delivered
via xinput2, which makes it all look very obscure)."
This patch was originally written by Marc Di Luzio for glX and enhanced by
Maximilian Malek for WGL, etc. Thanks to both of you!
Fixes Bugzilla #3643.
Fixes Bugzilla #3735.
Pegasus Epsilon
With the system dialog font set to Arial or Tahoma or another variable-width font, everything works just as expected. When using a fixed-width font, like Courier or DejaVu Sans Mono, the text gets cut off. Example screenshots attached.
Martijn Courteaux
I implemented precise scrolling events. I have been through all the folders in /src/video/[platform] to implement where possible. This works on OS X, but I can't speak for others. Build farm will figure that out, I guess. I think this patch should introduce precise scrolling on OS X, Wayland, Mir, Windows, Android, Nacl, Windows RT.
The way I provide precise scrolling events is by adding two float fields to the SDL_MouseWheelScrollEvent datastructure, called "preciseX" and "preciseY". The old integer fields "x" and "y" are still present. The idea is that every platform specific code normalises the scroll amounts and forwards them to the SDL_SendMouseWheel function. It is this function that will now accumulate these (using a static variable, as I have seen how it was implemented in the Windows specific code) and once we hit a unit size, set the traditional integer "x" and "y" fields.
I believe this is pretty solid way of doing it, although I'm not the expert here.
There is also a fix in the patch for a typo recently introduced, that might need to be taken away by the time anybody merges this in. There is also a file in Nacl which I have stripped a horrible amount of trailing whitespaces. (Leave that part out if you want).
manuel.montezelo
Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015
--------------------------------------------------------
Package: libsdl2-2.0-0
Version: 2.0.0+dfsg1-3
Severity: normal
Tags: patch
I have occasional crashes here caused by the X11 backend of SDL2. It seems to
be caused by the X11_Pending function trying to add a high number (> 1024)
file descriptor to a fd_set before doing a select on it to avoid busy waiting
on X11 events. This causes a buffer overflow because the file descriptor is
larger (or equal) than the limit FD_SETSIZE.
Attached is a possible workaround patch.
Please also keep in mind that fd_set are also used in following files which
may have similar problems.
src/audio/bsd/SDL_bsdaudio.c
src/audio/paudio/SDL_paudio.c
src/audio/qsa/SDL_qsa_audio.c
src/audio/sun/SDL_sunaudio.c
src/joystick/linux/SDL_sysjoystick.c
--------------------------------------------------------
On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote:
> I have occasional crashes here caused by the X11 backend of SDL2. It seems
> to be caused by the X11_Pending function trying to add a high number (>
> 1024) file descriptor to a fd_set before doing a select on it to avoid busy
> waiting on X11 events. This causes a buffer overflow because the file
> descriptor is larger (or equal) than the limit FD_SETSIZE.
I personally experienced this problem while hacking on the python bindings
package for SDL2 [1] (while doing make runtest). But it easier to reproduce in
a smaller, synthetic testcase.
Martin Gerhardy
just for easier debugging issues in the own code...
SDL_CreateRenderer should maybe also use this macro
Ryan C. Gordon
I'll go one better: it should have an SDL_assert().
Leonardo
Structure SDL_gestureTouch gets reallocated for every new added gesture but its never freed.
Proposed patch add the function SDL_GestureQuit() that takes care of doing that and gets called when TouchQuit is called.
Gabriel Jacobo
Thanks for the patch. I think it needs a bit of extra work though, looking at the code in SDL_gesture.c , I see that SDL_numGestureTouches only goes up, I think the right fix here involves adding SDL_GestureDelTouch (hooked into SDL_DelTouch) as well as SDL_GestureQuit (as you posted in your patch).
Rainer Deyke
I've written a small patch that adds a small SDL_DuplicateSurface function to SDL. I've written the function as part of a larger (as yet unfinished) patch, but I think this function is useful enough that it merits inclusion in SDL on its own.
Alvin
I'm interested in this bug as well. I have experienced it when trying to embed an SDL_Window into a FLTK application. To do this, I create a FLTK window (window inside a window - think video player) and then use SDL_CreateWindowFrom() on the inner most window's Xlib Window*. After which, I create a renderer.
In my situation I am using the FLTK GUI toolkit.
What I have experienced is that the SDL_CreateRender() will recreate the window in order to properly setup OpenGL capability. As part of this process, the window is hidden and a call is executed that waits indefinitely for an acknowledgement that the window was indeed unmapped. This is where my program hangs.
Please correct me if I am wrong, but should SDL2 not make Xlib calls that effect the Xlib Window in this situation (e.g. When SDL_CreateWindowFrom() is used)? The toolkit being used typically assumes responsibility and, I presume, tracks all Xlib Windows it creates.
On line src/video/SDL_video.c:1372 the comment associated with setting SDL_WINDOW_FOREIGN reads:
/* Can't destroy and re-create foreign windows, hrm */
Since I do not know the reason for hiding the window in the first place, the attached patch simply does not wait for a response when X11_XWithdrawWindow() and X11_XMapRaised() are issued by X11_HideWindow() and X11_ShowWindow(), respectively. I presume that the GUI toolkit (GTK, FLTK, etc.) has or will consume the acknowledging event as it is managing the Xlib Window (or it thinks it is).
I have tested the patch against hg 5c645d037de2 and I have successfully tested:
* Embedding the SDL_Window inside a FLTK application.
* Calling SDL_SetWindowSize() when FLTK resizes the window (e.g. dragging cursor on the edge of the window).
* Filling the renderer's default target blue and drawing a red fill square at the centre (exciting, I know!)
* Calling SDL_Quit() when the application terminates
I do not receive any Xlib erorr messages (BadWindow, etc.) in any of those situations.
UX-admin
I am compiling with the Sun Studio 12 u2 compiler. There are multiple issues with the build, but this particular issue appears to be that it is illegal to declare a union of a struct of floats and a float. While GCC 4.8.1 does not flag this as an error, Sun Studio is much more standards compliant and strict, halting further compilation with an error.
afwlehmann
Sorry for re-opening, but it turns out that the current interval is indeed not updated. I've just checked the source code of the 2.0.3 release again:
163 if (current->canceled) {
164 interval = 0;
165 } else {
166 interval = current->callback(current->interval, current->param);
167 }
168
169 if (interval > 0) {
170 /* Reschedule this timer */
171 current->interval = interval; // <-- this line is missing
172 current->scheduled = tick + interval;
173 SDL_AddTimerInternal(data, current);
174 } else {
According to the documentation: "The callback function is passed the current timer interval and the user supplied parameter from the SDL_AddTimer() call and returns the next timer interval. If the returned value from the callback is 0, the timer is canceled."
If I understand the text correctly, then the current interval should in fact be updated according to the returned value. Otherwise there would be a discrepancy between the next time for which the timer is actually re-scheduled and the value that's passed to the callback once the timer fires again.
This could be fixed by adding line #171.
Ozkan Sezer
The attached patch removes SDLCALL attribute from SDL_BlitFunc() funcptr.
As far as I can see, *SDL_BlitFunc() is completely internal to SDL with
no specific calling convention requirements. The actual functions assigned
to SDL_BlitFunc seem to not have any calling conventions specified. So,
easy solution is simply removing the strict calling convention from the
type.
Sylvain
Here's a patch.
It tries to get the hint first. Resizable will allow any orientation. Otherwise it uses width/height window.
setOrientation method is splitted in static and non-static, so that it can be overloaded in a user subclass.
Some artefact observed :
surfaceChanged() can be called twice at the beginning. When the phone starts in portrait and run a landscape application.
Clayton Craft
linux_input module is disabled by default, despite the comments in source code that it is otherwise:
src/video/directfb/SDL_DirectFB_video.c:
devdata->use_linux_input = readBoolEnv(DFBENV_USE_LINUX_INPUT, 0); /* default: on */
src/video/directfb/SDL_DirectFB_video.h:
#define DFBENV_USE_LINUX_INPUT "SDL_DIRECTFB_LINUX_INPUT" /* Default: on */
When using the directfb driver, the linux_input module is suppressed unless the SDL app is started with "SDL_DIRECTFB_LINUX_INPUT=1" set in the environment. I recall seeing at one point that the directfb folks recommended using linux_input over the other input drivers, but I am having trouble locating this recommendation. In any case, I believe that this should really be defaulted to 'on' since it's vastly superior to the other dfb input drivers!
Jimb Esser
Note: This is using DirectInput, I have to disable XInput as that causes all but the first 4 controllers to be completely ignored by SDL (I can find no way to reconcile XInput devices with DirectInput devices, otherwise I would make a patch that accepts the fifth and later controllers with DirectInput...). XInput does not seem to have the problem below, only DirectInput.
I plug in 3 identical wireless Xbox 360 controllers, call them J1, J2, J3. Direct Input shows them as having GUIDs G1, G2, G3. I unplug J1, then J2 and J3 show up as having GUIDs G1 and G2! Not so "unique"... I start my SDL app when just J2 and J3 are plugged in, and open J2 and J3. Then I plug in a new controller, SDL sees that now G3 exists, assigns that a new SDL joystick instance ID, which I request to be opened, but G3 at this point is J3, which I already had opened! So I end up with two instances of J3 opened, and none of J1. "Re-"opening G1 would get the actual handle to the newly attached controller, but there's no current way to know this. This is clearly a bug or poor design in DirectInput or my wireless receiver drivers, but is a showstopping bug for my 8-20 player games (as soon as any one controller runs out of battery or goes to sleep and gets turned back on, suddenly things are busted requiring a restart (or, at least, a reinitialization of all controllers - the game can't go on)).
The solution I found is to use HID paths instead of GUIDs to uniquely identify joysticks. GUIDs are still needed to open a controller, however I have added code to re-find the GUIDs for all joysticks whenever a new joystick is attached or removed. This does now require opening of all joysticks (instead of just enumerating them), though if your app, like mine, is opening all of them anyway so that any can press a button to join, that doesn't change much (although perhaps they joysticks should be kept open in this case, instead of closed and re-opened). If your app only ever opens one joystick, this will do more work at startup than it did previously.
Jonas Kulla
This eliminates the need to manually compile in SDL_main_android.c.
Instead, add "-lSDL2main -Wl,-u,SDL_main_dummy" when linking.
I don't know how the nkd-build process works, but unless it was
for some reason linking libSDL2main.a it should be unaffected.
Alexey
Seems to be a missing functionality. I want to set an icon from RC file. I cant pass MAKEINTRESOURCE(X) string to SDL_RegisterApp() cause string returned by MAKEINTRESOURCE string is not actually a string and SDL_strlen will crash. Moreover LoadImage seems to be loading wrong icon size. LoadIcon seems to be fine.
Edward Rudd
Device: Logitech Rumble Gamepad F510 in Xinput mode.
Upon opening the joystick the values of the axes are queried via PollAllValues are not actually set on the device all the time.
This can easily be seen in the testjoystick or testgamecontroller test programs,as the testjoystick shows all axes in the center until one 'tickles' the triggers., and the testgamecontroller will show the triggers as 'on' until on 'tickles' the triggers.
Upon further research the culprit is the SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS hint. In the default value events are ignored until there is an active window, Thus in cases where the joystick system is initialized and controllers opened before the initial window is created & focuses, the initial values will be incorrect.
Here is my current workaround in the game I'm working on porting..
SDL_SetHint(SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS, "1");
SDL_GameController* gamepad = SDL_GameControllerOpen(index);
SDL_SetHint(SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS, "0");
Edmund Horner
When a 16-bit "565 format" surface has a colour key set, it will blit with correct transparency. If, however, it has its colour key set then is converted to a 32-bit ARGB format surface, the colour key in the converted image will not necessarily be the same pixel value as the transparent pixels. It may not blit correctly, because the colour key does not match the right pixels.
In my case, with an image using 0xB54A for transparency, the colour key was converted to 180,170,82; but the corresponding pixels (with the same original value) were converted to 180,169,82. Blitting the converted image did not use transparency where expected.
I have attached a test case. The bug has been replicated on both x86_64 Linux (SDL 2.0.2), and 32-bit MS C++ 2010 on Windows (SDL 2.0.0).
malferit
Hello, I began a little program with SDL2 on Linux in C, and when I call SDL_Init(SDL_INIT_VIDEO) I get an error and this is printed in the console:
XDM authorization key matches an existing client!
I searched through Internet, and found that some people suggest to run 'xhost +' or to specify this in /etc/X11/xdm/xdm-config:
DisplayManager*authName: MIT-MAGIC-COOKIE-1
I don't think an end user needs to know that...
But what bothered me is that first I started this little program in Pascal using the Freepascal compiler and it works. In freepascal you only use some thin header bindings in Pascal and then it links with the dynamic SDL library, so I don't understood why it worked with Freepascal and not in C.
I run ldd to the two generated applications:
Application in C:
linux-gate.so.1 (0xffffe000)
libSDL2-2.0.so.0 => /usr/lib/libSDL2-2.0.so.0 (0xb76ac000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb766e000)
libc.so.6 => /lib/libc.so.6 (0xb74e2000)
libm.so.6 => /lib/libm.so.6 (0xb74a0000)
libdl.so.2 => /lib/libdl.so.2 (0xb749a000)
librt.so.1 => /lib/librt.so.1 (0xb7491000)
/lib/ld-linux.so.2 (0xb77b3000)
Application compiled with Freepascal:
linux-gate.so.1 (0xffffe000)
libSDL2-2.0.so.0 => /usr/lib/libSDL2-2.0.so.0 (0xb762a000)
libX11.so.6 => /usr/lib/libX11.so.6 (0xb74f3000)
libc.so.6 => /lib/libc.so.6 (0xb7367000)
libm.so.6 => /lib/libm.so.6 (0xb7325000)
libdl.so.2 => /lib/libdl.so.2 (0xb731f000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb7305000)
librt.so.1 => /lib/librt.so.1 (0xb72fc000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb72dc000)
libXau.so.6 => /usr/lib/libXau.so.6 (0xb72d9000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb72d3000)
/lib/ld-linux.so.2 (0xb7755000)
It seems that Freepascal is linking with libX11, libxcb, libXau and libXdmcp .
Linking my C application with libxcb solved the problem (linking with libXau and/or libXdmcp without libxcb didn't work). Linking with X11 links all the other libraries and works as well.
So I fill this bug report mainly to let you know about this. I don't know if it is a problem that can be solved on the libSDL side or not, but at least I hope it will help.
Hi, some tests:
1. Disabled XDM. Login in console and running 'startx'. The program works without having to link with X11.
2. Enabled XDM. Added 'DisplayManager*authName: MIT-MAGIC-COOKIE-1' to /etc/X11/xdm/xdm-config.The program works without having to link with X11.
3. Enabled XDM without 'DisplayManager*authName: MIT-MAGIC-COOKIE-1' in /etc/X11/xdm/xdm-config . I get the authentication error unless I link with X11.
Coriiander
There's a slight mistake in the function "GetWindowStyle" found in file "SDL_windowswindow.c".
When a window is marked to be resizable, the resizable style is being added regardless of whether the window has a border or not. While for some arcane, hidden semantics this can be ok, it's still inconsistent in this case.
Witek Jachimczyk
I'm using SDL to develop a video viewer for MATLAB. The window is scrambled while using thightVNC with its default mode of RGB656.
SDL does not correctly recognize the pixel mode.
I found a solution for this problem. The solution involves modifying
SDL/src/video/SDL_pixels.c
Adding the following "if statement" under case 16: of SDL_MasksToPixelFormatEnum resolves the issue:
if (Rmask == 0x003F &&
Gmask == 0x07C0 &&
Bmask == 0xF800 &&
Amask == 0x0000) {
return SDL_PIXELFORMAT_RGB565;
}
I hope that this helps someone. I took me a while to figure it out.
Yann Dirson
When SDL_GL_GetProcAddress returns in error, the cause of the error is overwritten
in GL_GL_GetAttribute, reporting to the user "Failed getting OpenGL glGetString entry point", whereas the original "OpenGL library not loaded" never makes it
to the user.
Pushed a fix to:
f94cb13708
Note that the "OpenGL library not loaded" error looks like no root cause either,
and I'm still puzzled by the code path used: I'm forcing opengles2 renderer on
the x11 video driver on a rpi2, as in https://bugzilla.libsdl.org/3169, and although I now know that I must force the use of the RPI video driver instead
of the x11 one, I suspect even more accurate info can be given to user.
Daniel Gibson
AZERTY keyboard layouts (which are the default layouts in France and Belgium) don't have the number keys (1, 2, ..., 9, 0) in the first row of keys, but ?, &, ?", ', (, -, ?_, ??), = (with small differences between the France and Belgian variants). Numbers are reached via shift.
On Linux and OSX, SDL seems to use the corresponding ISO 8859-1 codes (231 for ?232 for ?tc) as SDL_Keycode (but no SDK_* constants exists for those values!), while on Windows SDL seems to map those keys to SDLK_1, SDLK_2 etc, like you'd get on QWERTY.
I don't know how other platforms behave.
So we have two problems:
1. At least on Linux and OSX invalid/undefined SDL_Keycodes are returned
2. Different platforms behave differently (Windows vs Linux/OSX)
It's unclear what behavior is desired: Should SDL_* constants for those keys be introduced (and Windows behavior changed accordingly)?
Or should all platforms behave like Windows here and use the existing SDLK_1, ..., SDLK_0 keycodes?
This bug on the mailing list:
https://forums.libsdl.org/viewtopic.php?t=11555 (my post about Linux/Windows)
https://forums.libsdl.org/viewtopic.php?t=11573 (Tim Walters discovered the same problem on OSX about 1.5 weeks later).
Sylvain
Let's you have a SDL_Surface that has ColorKey, but no Alpha Modulation.
When this surface is duplicated with SDL_ConvertSurface function, the result has ColorKey and Alpha Modulation (BLEND, and Opaque 255).
I think SDL_ConvertSurface should strictly keeps the input format.
example
=======
SDL_Surface *input; // ... Set up a surface with ColorKey and no AlphaMod
SDL_Surface *output = SDL_ConvertSurface(input, input->format, input->flags);
// "output" surface has a ColorKey but *also* AlphaMod (BLEND, and Opaque 255).
Simon Hug
The bug is in the GL_ResetState and GLES_ResetState functions which get called after a new GL context is created. These functions set the cached current color to transparent black, but the GL specification says the initial color is opaque white.
The attached patch changes the values to 0xffffffff to reflect the initial state of the current color. Should the ResetState functions get called anywhere else in the future, this probably has to call the GL functions itself to ensure that the colors match.
Adam M.
The keysym.mod field does not reflect the state of the modified keys when processing key down events for the modifier keys themselves. The documentation says that it returns the current key modifiers, but they are not current for key down events involving modifier keys. I interpret "current" to mean "equal to SDL_GetModState() at the instant the event is processed/enqueued".
For example, if you depress the Shift key you get a key down event with .mod == 0. However, .mod should not be 0 because a shift key is down. If you then release the Shift key, you get a key up event with .mod == 0. Neither event reports the modifier key.
If you press Shift and then A, .mod is incorrect (== 0) when Shift is pressed, but is correct later when A is pressed (== KMOD_LSHIFT).
You might say this behavior is deliberate, i.e. keysym.mod is the value /before/ the event, not the current value as documented, but that explanation is incorrect because only key down events behave that way. Key up events correctly give the current value, not the value before the event.
Not only is it inconsistent with itself, I think it makes keyboard processing harder.
The problem is near line 740 in SDL_keyboard.c:
if (SDL_KEYDOWN == type) {
modstate = keyboard->modstate; // SHOULD THIS BE MOVED DOWN?
switch (keycode) {
case SDLK_NUMLOCKCLEAR:
keyboard->modstate ^= KMOD_NUM;
break;
case SDLK_CAPSLOCK:
keyboard->modstate ^= KMOD_CAPS;
break;
default:
keyboard->modstate |= modifier;
break;
}
} else {
keyboard->modstate &= ~modifier;
modstate = keyboard->modstate;
}
In the key down path, modstate (and thus keysym.mod) ends up being the modifier state /before/ the event, but in the key up path modstate ends up being the modifier state /after/ the event. Personally I think the "modstate = keyboard->modstate" line should just be moved after the entire if/else statement, so that keysym.mod always reflects the current state.
owen
I removed all the static variables from SDLActivity.java
Updated all the SDL_android.c jni calls as well
I added a new function to SDL_android.c/ h
void Android_JNI_SeparateEventsHint(const char* c);
This is called by SDL_androidtouch.c so that this TU doesn't need to call any JNI functions.
Philipp Wiesemann
There is another problem with the current implementation which maybe should be fixed first (to prevent some work). It was written as if it would get the number of a button from the Java side but actually it gets the state of all buttons. That is why it should not work if more than one button is pressed at once.
Ian Abbott
I just spotted what I think is a bug in "src/thread/pthread/SDL_sysmutex.c" in the SDL_TryLockMutex function when FAKE_RECURSIVE_MUTEX is defined (for an implementation of Pthreads with no recursive mutex support). It calls pthread_mutex_lock instead of pthread_mutex_trylock, so it will block until the mutex is available instead of returning SDL_MUTEX_TIMEDOUT if it cannot lock the mutex immediately.
Coriiander
Here is a minor correction for a non-breaking mistake in SDL_setenv for __WIN32__ platform. See below for details.
FILE:
"SDL/src/stdlib/SDL_getenv.c"
FUNCTION: (__WIN32__ platform)
int SDL_setenv(const char *name, const char *value, int overwrite)
CODE:
if (!overwrite) {
char ch = 0;
const size_t len = GetEnvironmentVariableA(name, &ch, sizeof (ch));
if (len > 0) {
return 0; /* asked not to overwrite existing value. */
}
}
WHAT'S WRONG:
The 3th argument to GetEnvironmentVariable (being DWORD nSize) must be the number of characters, not the number of bytes. SDL currently passes "the size of 1 char", rather "1". While it is non-breaking (1=1 after all), it is incorrect. Furthermore there is no need to specify the 2nd and 3th arguments at all.
CORRECTION 1: (corrected argument_
if (!overwrite) {
char ch = 0;
const size_t len = GetEnvironmentVariableA(name, &ch, 1);
if (len > 0) {
return 0; /* asked not to overwrite existing value. */
}
}
CORRECTION 2: (stripped of unneeded code)
if (!overwrite) {
if (GetEnvironmentVariableA(name, NULL, 0) > 0) {
return 0; /* asked not to overwrite existing value. */
}
}
Juha Niemim?
On AmigaOS 4 platform with Newlib 'C' library, there is a problem with failing fseeko64. This seemed to be caused by using fopen instead of fopen64.
Littlefighter19
When trying to mirror something on the PSP, I've stumbled upon the problem,
that using SDL_RenderCopyEx with SDL_FLIP_HORIZONTAL flips the image vertically, vise-versa SDL_FLIP_VERTICAL flips the image horizontally.
Proposed patch would be swapping the check in line 944 with the one in line 948 in SDL_render_psp.c
romain.lacroix
For the windows implementation of SDL_ShowMessageBox() : ./src/video/windows/SDL_windowsmessagebox.c:345 WIN_ShowMessageBox()
The implementation in 2.0.4 uses "button index" for parameter "id" of function AddDialogButton().
It then expects the value provided in param wParam of function MessageBoxDialogProc() to be a valid index of a button.
It uses this value to index in the array of buttons when DialogBoxIndirect() returns (line 474 : *buttonid = buttons[which].buttonid;)
However, when dismissing this box with Escape, the return value of DialogBoxIndirect will be SDL_MESSAGEBOX_BUTTON_ESCAPEKEY_DEFAULT (=2) which is not always a valid index of array buttons.
When the array buttons has a length less or equal than 2, the memory access is invalid; I can see that the value written to *buttonId is uninitialized memory (random value).
The fix I propose : use value "buttonid" (field of button) for parameter "id" of AddDialogButton(), then copy return value of DialogBoxIndirect() in *buttonid. This way, we will not use an out-of-bounds index in array buttons.
Simon Hug
The RGBA_FROM_PIXEL macro in src/video/blit.h [1] is not designed to work with more than 8 bits per channel and the ARGB2101010 format makes it read outside of the array bounds causing access violations. This can happen during blitting with the BlitNtoNPixelAlpha and SDL_Blit_Slow functions.
When SDL_InitFormat tries to calculate the loss of the channels [2], the Uint8 will wrap around and it will end up at 254 for the 10-bit channels. Clearly way over the 9 entries of the SDL_expand_byte array. (Not that a signed integer would help.) Then the macro tries to access the lookup table with the channel value which could be up to 1023. If the previous indirection didn't cause an access violation this one will.
I guess it's not worth modifying this macro for a format that only a few will use. It will only make the other blitters slower. I don't have good ideas to solve this issue.
Attached is a test case that does three blits. A copy one that work and the two that use the functions mentioned above.
[1] https://hg.libsdl.org/SDL/file/cd1994d4f3c6/src/video/SDL_blit.h#l303
[2] https://hg.libsdl.org/SDL/file/cd1994d4f3c6/src/video/SDL_pixels.c#l540
Daniel
SDL_RenderReadPixels with SDL_RENDERER_SOFTWARE reads pixels from wrong coordinates.
SW_RenderReadPixels adjusts the rect coordinates according to the viewport. But since this is already done by SDL_RenderReadPixels, the final rect has x2 bigger X and Y.
Fabian Greffrath
we use SDL_GetPrefPath() in Chocolate Doom to get a reasonable directory to save and restore config files and savegames:
https://github.com/chocolate-doom/chocolate-doom/blob/sdl2-branch/src/m_config.c#L2162
However, since there is no "organization" behind Chocolate Doom and there is really only one "product" called Chocolate Doom, we pass an empty string for the org parameter and the package string for app.
This leads to two consecutive slashes in the path returned by SDL_GetPrefPath() like this:
/home/user/.local/share//chocolate-doom/
While this is harmless, it sure looks bad.
I believe that it should be possible to either pass a NULL pointer for the org parameter or at least have the function detect an empty string as a means to express "there is no origanization, just a single product". The generation of the path string to be returned by the function will have to get adapted accordingly.
Eric Wasylishen
Alt-Up/Down/Left/Right switches between displays using SDL_WINDOWPOS_CENTERED_DISPLAY
Shift-Up/Down/Left/Right shifts the window by 100px
Simon Hug
Some code in SDL loads libraries with SDL_LoadObject to get more information or use newer APIs. SDL_LoadObject may fail, set an error message and SDL will continue with some fallback code. Since SDL will overwrite the error or exit the function with a return value that indicates success, the error form SDL_LoadObject for the optional stuff might as well be cleared right away.
Eric Wasylishen 2017-07-26 18:42:58 UTC
I set up an (admittedly exotic) 3-monitor setup, and when I enter fullscreen-desktop on the middle display (#2), the SDL window is off center. (covers half of monitor #2 and most of monitor #3).
The displays are arranged from left to right:
Display #1 (main): 2880x1800, 200% scaling
Display #2: 1920x1200, 150% scaling
Display #3: 1920x1080, 100% scaling
SDL display bounds:
INFO: Bounds: 1440x900 at 0,0
INFO: Bounds: 1281x801 at 1921,0 (these are incorrect)
INFO: Bounds: 1920x1080 at 4800,0
Correct bounds reported by calling EnumDisplayMonitors and printing the LPRECT param of the callback:
1440x900 at (0, 0)
1280x800 at (2880, 0)
1920x1080 at (4800, 0)
It seems like you need 3 displays to reproduce this, and the left two need DPI scaling, and the 3rd display needs to have a different scale factor than the others.
Related: https://bugzilla.libsdl.org/show_bug.cgi?id=3709
SDL: current hg (11235:6a587b9e0ec8)
Windows 10, Version 10.0.15063 Build 15063
Tested with testdraw2 and testgl2, and pressing alt+enter to enter fullscreen desktop.
This patch reworks SDL_windowsmodes.c to use EnumDisplayMonitors instead of EnumDisplayDevices, so we always have an HMONITOR for each SDL display.
With access to an HMONITOR, we can get the monitor bounds in virtual screen coordinates the proper way, by calling GetMonitorInfo. (whereas the original code was doing some calculations - e.g. "data->DeviceMode.dmPosition.x * data->ScaleX" - to try to get virtual screen coordinates. These worked in simple cases, but failed in more complex cases like this bug)
The one potential problem with my patch is, the ChangeDisplaySettingsEx docs say that you're supposed to get the display name from EnumDisplayDevices, but I'm getting the display name from GetMonitorInfo now.
Simon Hug
KMSDRM_VideoInit allocates and frees some connectors and encoders but doesn't set the pointer to NULL after freeing. The cleanup code at the end may free one of those garbage pointer should an error happen in the initialization.
Sam Lantinga
Ozkan Sezer
Ryan C. Gordon
Mark Callow
Ozkan Sezer
Brandon Schaefer
Ethan Lee
Guillermo A. Amaral
Dawid Gan
John Bartholomew
Marius Gripsgard
Alex Szpakowski
Olli Kallioinen
Conn O'Griofa
Johannes Bader
David Ludwig
Brandon Schaefer
Sven Hesse
Patrice Mandin
ouned