This is obnoxious and wrong, but the patch that activates the Dock before
activating the app fixes the _menu_ not responding on Catalina, but the
first window created by the app won't have keyboard focus without a small
delay inserted.
This obviously needs a better solution, but it gets it limping along correctly
for now.
sjordan
We did some investigations into a different direction which I would like to share. As mentioned previously the scaling setting in the preferences play an important role for our problem and they also hint towards an issue with point/pixel scaling factors.
We found an interesting correlation between our fail case and the behavior of [nsWindow.screen backingScaleFactor]. It turns out that whenever we encounter the fail case the scale factor is zero when we print it quickly after calling SDL_CreateWindow. After some time the value changes to a non-zero value. In the success case the scaling factor is nonzero 'immediately'. Note that we don't use that factor. We also find that the window backingScaleFactor does not show the strange behavior even in the fail case.
We have also attempted to find out whether any event triggers the transition from zero to non-zero. We found the transition happening when we call SDL_PollEvent. We can even force this to happen by explicitly adding a SDL_PollEvent at an early stage, but it will only happen if a certain amount of time elapsed, so we need to add some sleep before the call to trigger the transition at an earlier stage. All that seems to imply that the transition happens async and that SDL_PollEvent merely causes the system to update its internal state at that time.
We have also verified that the scaling setting in the preferences does NOT directly correlate to the scaling factor behavior. We find that a particular scaling setting can lead to a fail case for one resolution and a success case for another resolution. This shows that the scaling setting alone does not determine whether the problem will appear or not.
We have also verified on another Mac with 10.14 that the scaling factor is always non-zero and we always have the success case.
I have no idea how to interpret this initial-zero behavior and haven't found any usable information on the screen backing scale factor. It seems as 10.15 does some stuff more async than before and maybe the problem could be caused by unfortunate timings. I would be very interested to hear your opinion about that.
...
Finally we found the cause of all our problems: it's the origin hack in Cocoa_SetWindowFullscreen:
/* Hack to fix origin on Mac OS X 10.4 */
NSRect screenRect = [[nswindow screen] frame];
if (screenRect.size.height >= 1.0f) {
rect.origin.y += (screenRect.size.height - rect.size.height);
}
If we comment this one out our game and testdraw2 do behave correctly.
It turns out that if a window is not fully contained in the screen, it's screen property becomes zero and therefore we saw a zero when printing the backing scale factor (although it's not clear why it became nonzero later).
We suggest to add a runtime check which skips this code for 10.15 (or possibly earlier if you happen to know that the hack is not needed for certain older versions).
More info: consider the line
NSRect screenRect = [[nswindow screen] frame];
in Cocoa_SetWindowFullscreen. We found that this rect has the dimensions of the desktop
on our OS X 10.15 setup. This is true both for the success case and the fail case. It seems as the success case is actually a fail case in disguise.
On the other Mac with OS X 10.14 the same rect has the dimension of the newly created screen. This is what I would expect, because at that time the window has already been created successfully and there should be a newly created screen associated to the window.
What are the cases in which the whole origin conversion code for the fullscreen case is supposed to have a non-trivial result?
Today we found that if we print the dimensions of [nswindow screen] later, then we find them to be correct. So the conclusion seems to be that OS X 10.15 does indeed do the window/screen setup more async than before and that the origin correction code uses the [nswindow screen] at a time where the window/screen setup isn't finalized yet.
It was done to allow hotkey resizing of borderless windows, but Windows will sometimes draw it, regardless of our WM_* message handling. See bug 4466 for more details.
Alex Denisov
When using Win10 on-screen keyboard (tooltip.exe), the left and right cursor keys in it do not produce SDLK_LEFT and SDLK_RIGHT events.
Windows messages generated by the on-screen keyboard, for some reason, have their scancodes set to zeroes. Here is the log from Spy++:
WM_KEYDOWN nVirtKey:VK_LEFT cRepeat:1 ScanCode:00 fExtended:0 fAltDown:0 fRepeat:0 fUp:0
WM_KEYUP nVirtKey:VK_LEFT cRepeat:1 ScanCode:00 fExtended:0 fAltDown:0 fRepeat:1 fUp:1
Regular physical keyboard produces VK_LEFT (ScanCode:4B) and VK_RIGHT (ScanCode:4D) which are interpreted correctly.
With on-screen keyboard, the switch statement in VKeytoScancode() does not check for VK_LEFT and VK_RIGHT, returning SDL_SCANCODE_UNKNOWN, which in turn does not get mapped to anything (because the scan codes are zeroes).
Add an include on SDL_error.h to avoid the following build failure
without threads:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabihf/8.3.0/../../../../arm-buildroot-linux-uclibcgnueabihf/bin/ld: build/.libs/SDL_threadprio.o: in function `SDL_LinuxSetThreadPriority_REAL':
SDL_threadprio.c:(.text+0x0): undefined reference to `SDL_Unsupported'
Fixes:
- http://autobuild.buildroot.org/results/7f7712c5bd47de4a3fcec1e0d0526fd5a3ecd532
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Likewise for the GLES1 and GLES2 renderers.
This solves the missing pixel at the end of a line and removes all the
heuristics for various platforms/drivers. It's possible we could still use
GL_LINE_STRIP with this and save some vertex buffer space, assuming this
doesn't upset some driver somewhere, but this seems to be a clean fix that
makes the GL renderers match the software renderer output.
Diamond-exit rule explanation:
http://graphics-software-engineer.blogspot.com/2012/04/rasterization-rules.html
Fixes Bugzilla #3182.
Anthony Pesch
* Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit.
* Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation.
* Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing.
* Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially.
* Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support.
These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520.
As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes.
I've made a few small changes to the logic that had thrown me off originally and rebased the changes:
* The condition wrapping the call to release buffer was incorrect.
* The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed.
* Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
meyraud705
In SDL_hidapi_switch.c
line 443: Function BTrySetupUSB call WriteProprietary with pBuf=NULL and ucLen=0
line 376: WriteProprietary check its input (!pBuf && ucLen > 0) || ucLen > sizeof(packet.rgucProprietaryData): ucLen is 0 so it passes
line 382: WriteProprietary call memcpy with pBuf=NULL
meyraud705
Dualshock4 on bluetooth need 78 bytes for the rumble data while SDL_HIDAPI_RumbleRequest can only hold 64 bytes.
'volatile' is not meant for thread synchronization.
The list of rumble request could grow infinitely if user call SDL_JoystickRumble too much. The documentation says "Each call to this function cancels any previous rumble effect", so overwriting pending request seem like a good idea.
This fixes a crash whereby SDL could crash on macOS/Darwin, if and when a
USB game controller gets unplugged. SDL was not retaining a reference
to the controller's OS/IOKit-provided 'device object', and was capable
of trying to use it, after a device was hot-unplugged.
There is now a thread that handles all HIDAPI rumble requests and a lock that guarantees that we're not reading and writing the device at the same time.
The index and indices were swapped; Which is fine as long as there are
no gaps in the ABS_HAT* event availability but otherwise things do get confused.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Cameron Cawley
This adds a number of files used by the build systems to the .hgignore file. Most of them are for CMake, but there are other additions as well.
Malte
clion builds into cmake-build-debug, cmake-build-release etc. by default. Also, it creates the .idea forlder in wich it places some (mostly local) config.
Since SDL is perfectly buildable from within the IDE, i think it'd be nice to have the build and ide artifacts ignored by hg.
Martin Fiedler
To be precise, this is about *desktop OpenGL* on X11. For OpenGL ES, EGL is already used (as it's the only way to get an OpenGL ES context), as Sylvain noted above.
To shine some light on why this is needed:
In 99% of all cases, using GLX on X11 is fine, even though it's effectively deprecated in favor of EGL [1]. However, there's at least one use case that *requires* the OpenGL context being created with EGL instead of GLX, and that's DRM_PRIME interoperability: The function glEGLImageTargetTexture2DOES simply doesn't work with GLX. (Currently, Mesa actually crashes when trying that.)
Some example code:
https://gist.github.com/kajott/d1b29c613be30893c855621edd1f212e
Runs on Intel and open-source AMD drivers just fine (others unconfirmed), but with #define USE_EGL 0 (i.e. forcing it to GLX), it crashes. The same happens when using SDL for window and context creation.
The good news is that most of the pieces for EGL support on X11 are already in place: SDL_egl.c is pretty complete (and used for desktop OpenGL on Wayland, for example), and SDL_x11opengl.c has the aforementioned OpenGL-ES-on-EGL support. However, when it comes to desktop OpenGL, it's hardcoded to fall back to GLX.
I'm not advocating to make EGL the default for desktop OpenGL on X11; don't fix what ain't broken. But something like an SDL_HINT_VIDEO_X11_FORCE_EGL would be very appreciated to make use cases like the above work with SDL.
[1] source: Eric Anholt, major Linux graphics stack developer, 7 years ago already - see last paragraph of https://www.phoronix.com/scan.php?page=news_item&px=MTE3MTI
Luis Caceres
The current handling of Wayland mouse pointer events only handles wl_pointer.axis events, which, according to the Wayland documentation, deal with mouse wheel scroll events on a continuous scale. While this is reasonable for some input sources (e.g. touchpad two-finger scrolling), it is not for mouse wheel clicks which generate wl_pointer.axis events with large deltas.
This patch adds handling for wl_pointer.axis_discrete and wl_pointer.frame events and prefers to report SDL_MouseWheelEvent in discrete units if they are available. This means that for mouse wheel scrolling we count in clicks, but for touchpad two-finger scrolling we still use whatever units Wayland uses. This behaviour is closer to that of the X11 backend.
Since these events are only available since version 5 of the wl_seat interface, this patch also checks for this and falls back to the previous behaviour if its not available. I also had to add definitions for some of the pointer and keyboard events specified in versions 2-5 but these are just stubs and do nothing.
Sam Lantinga
Ryan C. Gordon
Fabrice Fontaine
David Ludwig
Sjoerd Simons