This is the only case where the mapping differs between right and left Joy-Cons in mini-gamepad mode. The left Joy-Con will have the left paddles and the right Joy-Con will have the right paddles. This facilitates co-op gameplay with individual actions while still using the normal mini-gamepad mode.
The paddles are used for this because conceptually they are more awkward to hit than the normal controls and they are in roughly the correct hand position.
* Added support for vertical mode for Joy-Con controllers
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_VERTICAL_JOY_CONS for switching to this mode
* Added support for SL/SR buttons in combined/vertical mode and L/ZL/R/ZR buttons in mini-gamepad mode
Calling SDL_HideWindow() to destroy the window is a NOP if the SDL_WINDOW_SHOWN flag was never set. Bypass it and call the Wayland-specific function directly to ensure that the window is always destroyed before switching from server-side to client-side decorations, even if it hasn't been shown yet.
Likewise, call Wayland_ShowWindow() directly when the window isn't explicitly hidden to ensure that it is always recreated since the SDL_WINDOW_SHOWN flag won't be cleared, which, when set, renders SDL_ShowWindow() a NOP.
Before calling any D-Bus related methods we should first ensure that
they
were correctly loaded.
In the event where `LoadDBUSLibrary()` was not able to load the D-Bus
library, we should just return early, signalling with SDL_FALSE that we
were unable to inhibit the Screensaver.
Helps: https://github.com/ValveSoftware/steam-for-linux/issues/8815
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
ad874536 removed an unnecessary limit as we *can* have a devindex
greater than 99, this error message does not reflect the support for
values greater than 99.
If a Nintendo Switch Pro controller is turned off, it will leave the controller connected in Windows, but not responding to reports. Don't wait a really long time trying to get information from a controller in this state.
On Windows, the Bluetooth device can remain in a connected state if the controller just shut down. It won't return any errors, but it also won't generate any input reports in this state, so wait until we know for sure that the Bluetooth controller is sending data before letting the application know it's available.
Nintendo Switch controllers will automatically turn off Bluetooth when connected over USB, but this takes care of that a little more quickly.
PS4 and PS5 controllers will happily send reports over both Bluetooth and USB, so we'll prefer USB if connected and switch back to Bluetooth if USB is disconnected.
The text component of a repeated keystroke is initially set when a key is first pressed and the cached value remains static until the repeated key is released and another repeatable key is pressed. If the state of a modifier such as shift or capslock is changed while a key is being repeated, the text emitted will not have the modifier applied to it until the repeated key is released and pressed again.
Update the text to be repeated by a key if a modifier is changed while a key is actively being repeated.
The XKB keysym to SDL keycode mappings were missing for the Escape and NumLock keys, which prevented them from being remapped. Add them to the table so that the remapping of these keys will work.
Note that returning SDL_PIXELFORMAT_BGR24 instead of SDL_PIXELFORMAT_RGB24 seems necessary, otherwise when running with SDL_ACCELERATION=0, the red and blue channels of the window appeared swapped.
Note that when running with acceleration enabled, red and blue channel swapping does not happen regardless of whether SDL_PIXEL_FORMAT_RGB24 or SDL_PIXEL_FORMAT_BGR24 is returned.
For good measure, I also tested running with acceleration disabled in both 15 and 16 bit color depths, but red and blue channel swapping did not occur
This prevents a number of issues where devices are enumerated but not actually able to be opened, like https://github.com/libsdl-org/SDL/issues/5781.
We currently leave the devices open, allowing us to more easily do controller feature detection, protocol negotiation, detect dropped Bluetooth connections, etc. with the expectation that the application is likely to open the controllers shortly.
If multiple keys were simultaneously depressed and one was being repeated, the repeat flag was being cleared when any of the pressed keys were released, even if the released key wasn't the one being repeated.
This tracks the key currently being repeated and only clears the repeat flag when the particular key being repeated is released.
Silences clang -Wpragma warnings:
D:/a/SDL/SDL/src/video/windows/SDL_windowstaskdialog.h:21:10: warning: the current #pragma pack alignment value is modified in the included file [-Wpragma-pack]
#include <pshpack1.h>
^
D:/a/_temp/msys64/clang64/include/pshpack1.h:7:9: note: previous '#pragma pack' directive that modifies alignment is here
#pragma pack(push,1)
^
In file included from D:/a/SDL/SDL/src/video/windows/SDL_windowsmessagebox.c:35:
D:/a/SDL/SDL/src/video/windows/SDL_windowstaskdialog.h:156:10: warning: the current #pragma pack alignment value is modified in the included file [-Wpragma-pack]
#include <poppack.h>
^
note: previous '#pragma pack' directive that modifies alignment is here
2 warnings generated.
Closes: https://github.com/libsdl-org/SDL/issues/6240
Unfortunately the only way to detect this is to actually try opening a device, so we wait until the application tries, and then stop enumerating afterwards.
Fixes https://github.com/libsdl-org/SDL/issues/5781
This kicks in if the platform doesn't support vsync directly, or if the present fails for some reason (e.g. minimized on some platforms)
Fixes https://github.com/libsdl-org/SDL/issues/5134
X11 has a so-called primary selection, which you can use by marking text and middle-clicking elsewhere to copy the marked text.
There are 3 new API functions in `SDL_clipboard.h`, which work exactly like their clipboard equivalents.
## Test Instructions
* Run the tests (just a copy of the clipboard tests): `$ ./test/testautomation --filter Clipboard`
* Build and run this small application:
<details>
```C
#include <SDL.h>
#include <unistd.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
void print_error(const char *where)
{
const char *errstr = SDL_GetError();
if (errstr == NULL || errstr[0] == '\0')
return;
fprintf(stderr, "SDL Error after '%s': %s\n", where, errstr);
SDL_ClearError();
}
int main()
{
char text_buf[256];
srand(time(NULL));
SDL_Init(SDL_INIT_VIDEO);
print_error("SDL_INIT()");
SDL_Window *window = SDL_CreateWindow("Primary Selection Test", SDL_WINDOWPOS_UNDEFINED,
SDL_WINDOWPOS_UNDEFINED, 400, 400, SDL_WINDOW_SHOWN);
print_error("SDL_CreateWindow()");
SDL_Renderer *renderer = SDL_CreateRenderer(window, -1, SDL_RENDERER_ACCELERATED);
print_error("SDL_CreateRenderer()");
bool quit = false;
unsigned int do_render = 0;
while (!quit) {
SDL_Event event;
while (SDL_PollEvent(&event)) {
print_error("SDL_PollEvent()");
switch (event.type) {
case SDL_QUIT: {
quit = true;
break;
} case SDL_KEYDOWN: {
switch (event.key.keysym.sym) {
case SDLK_ESCAPE:
case SDLK_q:
quit = true;
break;
case SDLK_c:
snprintf(text_buf, sizeof(text_buf), "foo%d", rand());
SDL_SetClipboardText(text_buf);
print_error("SDL_SetClipboardText()");
printf("clipboard: set_to=\"%s\"\n", text_buf);
break;
case SDLK_v: {
printf("clipboard: has=%d, ", SDL_HasClipboardText());
print_error("SDL_HasClipboardText()");
char *text = SDL_GetClipboardText();
print_error("SDL_GetClipboardText()");
printf("text=\"%s\"\n", text);
SDL_free(text);
break;
} case SDLK_d:
snprintf(text_buf, sizeof(text_buf), "bar%d", rand());
SDL_SetPrimarySelectionText(text_buf);
print_error("SDL_SetPrimarySelectionText()");
printf("primselec: set_to=\"%s\"\n", text_buf);
break;
case SDLK_f: {
printf("primselec: has=%d, ", SDL_HasPrimarySelectionText());
print_error("SDL_HasPrimarySelectionText()");
char *text = SDL_GetPrimarySelectionText();
print_error("SDL_GetPrimarySelectionText()");
printf("text=\"%s\"\n", text);
SDL_free(text);
break;
} default:
break;
}
break;
} default: {
break;
}}
}
// create less noise with WAYLAND_DEBUG=1
if (do_render == 0) {
SDL_RenderPresent(renderer);
print_error("SDL_RenderPresent()");
}
do_render += 1;
usleep(12000);
}
SDL_DestroyRenderer(renderer);
SDL_DestroyWindow(window);
SDL_Quit();
print_error("quit");
return 0;
}
```
</details>
* Use c,v,d,f to get and set the clipboard and primary selection.
* Mark text and middle-click also in other applications.
* For wayland under x:
* `$ mutter --wayland --no-x11 --nested`
* `$ XDG_SESSION_TYPE=wayland SDL_VIDEODRIVER=wayland ./<path_to_test_appl_binary>`
Clip rectangle set to int(left+width/2) , int(top+height/2) , int(left+width/2)+1 , int(top+height/2)+1
a 1x1 box
On even-valued resolution, cursor is stable at bottom-right central pixel
On odd-valued resolution, cursor is stable at exact central pixel.
this is the desired behaviour
In some cases, a backbuffer size update may not be accompanied by a resize event if the window size and/or scale were updated before the new backbuffer size was recomputed. Instead of the scale, use the old/new backbuffer sizes to determine if a resize event is required so that a backbuffer size change will always be followed by a resize event.
Instead of wrapping individual calls to SDL_SetDisplayModeForDisplay(), just check the flag in the function itself and make it a NOP that cannot fail if the flag is set. Silences some errant "SDL video driver doesn't support changing display mode" log errors.
When hiding a window, libdecor can report bogus content region sizes that are +/- the height of the title bar. Ignore any size values from libdecor when hiding a window, or the size may be incorrect when restored.
The compositor can arbitrarily move windows between displays, including fullscreen windows. Update the internal state when a fullscreen window is moved so the internal SDL state accurately reflects the window location, and resize the window to fit the new display.
This also fixes an edge case where the compositor can make a window fullscreen on a different display than SDL thinks it will be on (usually when a window is made fullscreen by the compositor while straddling multiple displays), which can result in the window being incorrectly sized.
If additional fullscreen requests are received when the window is already fullscreen, it is typically due to the fullscreen flags or emulated video mode being changed. A commit must be explicitly triggered or the requested changes won't take effect until some other event, such as a resize or focus change, causes the changes to be committed.
The compositor can toggle the fullscreen state (via a hotkey or otherwise), so the internal SDL state must be updated accordingly when it does.
When toggling fullscreen via the compositor, SDL will attempt to use the last fullscreen flag explicitly set. If no flag was previously set, SDL_WINDOW_FULLSCREEN will be used if a window video mode was set, otherwise SDL_WINDOW_FULLSCREEN_DESKTOP will be used. If the previous flag was SDL_WINDOW_FULLSCREEN and the window video mode was cleared, it will revert to SDL_WINDOW_FULLSCREEN_DESKTOP.
SDL_Quit() should be the last SDL API that you call before exiting your application, and is intended to clean up all internal state.
If real-life applications are relying on thread-local storage after SDL_Quit() we could potentially add a hint to control this behavior.
Fixes https://github.com/libsdl-org/SDL/issues/6200
DS4Windows can create both emulated Xbox and emulated PS4 controllers, and we don't know which the user has it doing, so don't try to second guess it, just let it do it's thing. Users should follow the remapping software recommendations on when to enable/disable it for various situations.
Fixes https://github.com/libsdl-org/SDL/issues/6167
There is supposedly an OpenGL ES2 target that does not support precision specifiers. However, the existing logic to detect this is currently broken in two ways:
1) There's a typo of the `#ifdef` as `#if`.
2) Checking for `GL_FRAGMENT_PRECISION_HIGH` can not be the correct way to detect this platform. Other targets, including some desktops, will also not have this defined (for various reasons).
Because some of the shader code is missing precision specifiers, and because a default is ONLY provided if `GL_FRAGMENT_PRECISION_HIGH` is set, these other targets break.
Instead of 'hard-coding' the prologue string into shaders in the C source, use our ability to provide a list of strings to `glShaderSource` instead, leaving the determination to run-time.
This commit closes https://github.com/libsdl-org/SDL/pull/6182
build/.libs/SDL_hidapi.o: In function `SDL_EnableGameCubeAdaptors':
src/hidapi/SDL_hidapi.c:1593: undefined reference to `libusb_init'
src/hidapi/SDL_hidapi.c:1594: undefined reference to `libusb_get_device_list'
src/hidapi/SDL_hidapi.c:1596: undefined reference to `libusb_get_device_descriptor'
src/hidapi/SDL_hidapi.c:1604: undefined reference to `libusb_open'
src/hidapi/SDL_hidapi.c:1608: undefined reference to `libusb_kernel_driver_active'
src/hidapi/SDL_hidapi.c:1614: undefined reference to `libusb_claim_interface'
src/hidapi/SDL_hidapi.c:1623: undefined reference to `libusb_close'
src/hidapi/SDL_hidapi.c:1626: undefined reference to `libusb_free_device_list'
src/hidapi/SDL_hidapi.c:1628: undefined reference to `libusb_exit'
src/hidapi/SDL_hidapi.c:1609: undefined reference to `libusb_detach_kernel_driver'
src/hidapi/SDL_hidapi.c:1620: undefined reference to `libusb_attach_kernel_driver'
src/hidapi/SDL_hidapi.c:1615: undefined reference to `libusb_control_transfer'
src/hidapi/SDL_hidapi.c:1616: undefined reference to `libusb_release_interface'
build/.libs/SDL_hidapi.o: In function `SDL_hid_init_REAL':
src/hidapi/SDL_hidapi.c:1086: undefined reference to `libusb_init'
src/hidapi/SDL_hidapi.c:1087: undefined reference to `libusb_exit'
src/hidapi/SDL_hidapi.c:1088: undefined reference to `libusb_get_device_list'
src/hidapi/SDL_hidapi.c:1089: undefined reference to `libusb_free_device_list'
src/hidapi/SDL_hidapi.c:1090: undefined reference to `libusb_get_device_descriptor'
src/hidapi/SDL_hidapi.c:1091: undefined reference to `libusb_get_active_config_descriptor'
src/hidapi/SDL_hidapi.c:1092: undefined reference to `libusb_get_config_descriptor'
src/hidapi/SDL_hidapi.c:1093: undefined reference to `libusb_free_config_descriptor'
src/hidapi/SDL_hidapi.c:1094: undefined reference to `libusb_get_bus_number'
src/hidapi/SDL_hidapi.c:1095: undefined reference to `libusb_get_device_address'
src/hidapi/SDL_hidapi.c:1096: undefined reference to `libusb_open'
src/hidapi/SDL_hidapi.c:1097: undefined reference to `libusb_close'
src/hidapi/SDL_hidapi.c:1098: undefined reference to `libusb_claim_interface'
src/hidapi/SDL_hidapi.c:1099: undefined reference to `libusb_release_interface'
src/hidapi/SDL_hidapi.c:1100: undefined reference to `libusb_kernel_driver_active'
src/hidapi/SDL_hidapi.c:1101: undefined reference to `libusb_detach_kernel_driver'
src/hidapi/SDL_hidapi.c:1102: undefined reference to `libusb_attach_kernel_driver'
src/hidapi/SDL_hidapi.c:1103: undefined reference to `libusb_set_interface_alt_setting'
src/hidapi/SDL_hidapi.c:1104: undefined reference to `libusb_alloc_transfer'
src/hidapi/SDL_hidapi.c:1105: undefined reference to `libusb_submit_transfer'
src/hidapi/SDL_hidapi.c:1106: undefined reference to `libusb_cancel_transfer'
src/hidapi/SDL_hidapi.c:1107: undefined reference to `libusb_free_transfer'
src/hidapi/SDL_hidapi.c:1108: undefined reference to `libusb_control_transfer'
src/hidapi/SDL_hidapi.c:1109: undefined reference to `libusb_interrupt_transfer'
src/hidapi/SDL_hidapi.c:1110: undefined reference to `libusb_handle_events'
src/hidapi/SDL_hidapi.c:1111: undefined reference to `libusb_handle_events_completed'
collect2: ld returned 1 exit status
These report their VID/PID as a Nintendo Switch Pro controller, but they are actually left/right Joy-Cons. We'll fix up the joystick GUID so applications can handle them appropriately.
This reverts commit ff233fe306.
This doesn't compile cleanly with Visual Studio and I don't want to introduce any subtle issues because we're passing the wrong types of pointers to WGI functions.
This makes the joystick locking more robust by holding the lock while updating joysticks.
The lock should be held when calling any SDL joystick function on a different thread than the one calling SDL_PumpEvents() and SDL_JoystickUpdate().
It is now possible to hold the lock while reinitializing the joystick subsystem, however any open joysticks will become invalid and potentially cause crashes if used afterwards.
Fixes https://github.com/libsdl-org/SDL/issues/6063
In order to inhibit the screen saver, SDL currently uses
`org.freedesktop.ScreenSaver.Inhibit()` and, as a fallback, a protocol
specific method for X11 or Wayland.
Accessing `org.freedesktop.ScreenSaver` is usually not allowed when
inside a sandbox like Flatpak, unless the permission has been explicitly
granted to the application.
Another issue is that the Wayland protocol "Idle inhibit" is relatively
new and not yet widely adopted. For example Mutter still doesn't support
it.
For those reasons, when running under Flatpak or Snap, we should try to
inhibit the screen saver by using xdg-desktop-portal instead. This
should give us an higher chance of success.
Fixes: https://github.com/libsdl-org/SDL/issues/6075
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
Refactor the previous sandbox check in a standalone function that also
includes Snap support.
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
SDL_DBus_CallWithBasicReply() allows us to send a DBus message and get
its result, if it is a basic type, e.g. integer or string.
With this function we avoid duplicating code.
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
This is in the hope that revving the product version doesn't change the mapping, which is the case for some devices. In cases where it does, we just need to provide a mapping for each version of the product.
Adjust candidate count so list is not draw bigger that needed. This also fix potential uninitialised read of variable `candsize[i]` if `vertical` is false.
This is now used as a crc field in the mapping rather than directly in mapping guids, for better mapping compatibility between versions of SDL.
Added SDL_GetJoystickGUIDInfo() to get device information encoded in a joystick GUID, so that mapping programs can clear the CRC from the GUID when generating mappings.
sort_controllers.py has been updated to extract the CRC from mappings created by older mapping programs and convert it into the new crc field. It will also take the CRC into account when checking for duplicate mappings.
Also regenerated the GUIDs for the PS2/PSP/Vita controller mappings, fixing https://github.com/libsdl-org/SDL/issues/6151
This will make it possible to have mappings for different controllers
that have the same VID/PID. This happens frequently with some generic
controller boards that have been reused in many products.
Fixes https://github.com/libsdl-org/SDL/issues/6004
Update the Wayland core protocol spec file and add support for the new axis_value120 event to handle high resolution scroll wheels.
The axis_value120 replaces the axis_discrete event, which is no longer sent as of version 8 of the protocol. Note that unlike the axis_discrete event, no mention in the spec is made regarding how many axis_value120 events may occur per-axis per-frame, so the values are accumulated and committed when the pointer frame event occurs.
The libdecor header internally includes wayland-client.h, which pulls in the wayland-client-protocol.h file from the system include path and overrides the local one generated from the included Wayland protocol spec files. Move the Wayland protocol header inclusion above the libdecor header inclusion to ensure that the locally generated protocol header is used instead.
When minimizing a window, we get this sequence of events:
WM_WINDOWPOSCHANGING
WM_GETMINMAXINFO
WM_NCCALCSIZE
WM_WINDOWPOSCHANGED - IsIconic() is true
WM_MOVE
WM_SIZE - SDL sees minimized state here
When restoring a window, we get this sequence of events:
WM_WINDOWPOSCHANGING
WM_GETMINMAXINFO
WM_NCCALCSIZE
WM_NCPAINT
WM_ERASEBKGND
WM_WINDOWPOSCHANGED - IsIconic() is false
WM_MOVE
WM_SIZE - SDL sees restored state here
On Windows 10 a minimized window has a non-empty client rect, so we were delivering a minimized size before SDL knows that the window is minimized, and then ignoring the restored size when handling the restore message.
The fix is to use IsIconic() which returns the correct window state when WM_WINDOWPOSCHANGED is actually delivered.
Uses VK_EXT_metal_surface (vkCreateMetalSurfaceEXT)
when possible, otherwise falls back to the obsoleted
VK_MVK_macos_surface and VK_MVK_ios_surface.
Fixes#3906
If libdecor performs a commit with the frame title being undefined, a crash can occur within the library or its plugins. Always ensure that the title is set to a valid string to avoid this.
This prevents crashes when calling SDL joystick API functions from a different thread while disconnection is happening.
See https://github.com/libsdl-org/SDL/issues/6063 for a more thorough review of joystick locking.
Eliminate excessive calls to SetFullscreen by removing the calls in the libdecor and xdg-toplevel config callbacks.
These calls were being made there in case something explicitly called the window minimization function from within SDL, which unsets fullscreen, and as minimizing a window in Wayland is just a suggestion to the compositor and doesn't actually change the window state or communicate anything back to the application, it was necessary to call SetFullscreen in every call to the config functions just in case something minimized a window via SDL_MinimizeWindow() and later needed to restore it. GNOME in particular had issues when fullscreen set/unset operations were being hammered, leading to overlapping acks and commits when switching to fullscreen.
With the new video system flag to disable unsetting fullscreen when minimizing a window, these calls in the configuration functions are no longer needed and can be removed. This significantly reduces calls to the SetFullscreen() function, reverts #6044 while fixing the issue, and fixes a similar problem when hiding and showing a window initially created with fullscreen flags.
Add quirk flags to the video device struct and add flags to allow video backend drivers to disable mode switching and disable unsetting the fullscreen mode when minimizing a window. As certain platforms can have multiple video backends compiled in at once, #ifdefs, as used by other platforms, aren't suitable as different backends on the same platform may not need the same quirks.
This replaces the formerly dedicated 'disable_display_mode_switching' boolean as additional quirks are needed by the Wayland backend. Helper functions have also been added to simplify reading the flag states.
If the D-Bus subsystem is shutdown and restarted mid-execution, the cached connection will be invalid. Fetch it each time that it is used to ensure that the connection is always from the current context.
Don't call the roundtrip in ShowWindow unless restoring a previously hidden window. This fixes a regression in GNOME when creating a window with the fullscreen flag set, as the fullscreen window will be positioned down the screen by the height of the top bar if the window is made fullscreen on the primary display and the roundtrip is called when initially displaying the window.
SDL_CreateWindow() may call GetWindowDisplayIndex() to compute the position
of a new window that the caller has requested to be placed on a certain
display. Since we haven't fully constructed the window yet, our driverdata
will be nil and we will fail to get the NSScreen (which is fine). However,
we need to return an error (not 0, which is a valid display index) for
SDL_GetWindowDisplayIndex() to know to figure out the display index itself.
Fixes positioning new windows on secondary displays when using
SDL_WINDOWPOS_CENTERED_DISPLAY() and SDL_WINDOWPOS_UNDEFINED_DISPLAY().
OpenGL windows don't actually get the WM_WINDOWPOSCHANGED event in the SetWindowPos() call in WIN_SetWindowFullscreen(), so setting the window size to zero never gets reset and we're stuck with a zero sized window.
Instead, just force the resize event in WM_DPICHANGED handling, where we know we need it. If we end up needing to force it in WIN_SetWindowFullscreen(), just set a flag in the window data and respond to that in WM_WINDOWPOSCHANGED, but that's a fairly risky behavior change as suddenly all applications would start getting SDL_WINDOWEVENT_SIZE_CHANGED when going fullscreen, and they may respond to that in expensive and potentially disruptive ways.
For later we'll probably create a DPI changed event and respond to that in the renderer instead of this window size changed hack.
This fixes https://github.com/libsdl-org/SDL/issues/6033 @ericwa
The video core assumes that window->w/h will be updated before returning
from SetWindowFullscreen(). This is needed to generate a resize event
with the correct window size when exiting fullscreen.
The roundtrip allows us to receive the configure callback that informs
us of the new window size before returning.
Fixes#6043
We really only care about DPI changes here, so this both reduces work and also avoids weird cases where viewport state can be corrupted by trivial window events. This doesn't _completely_ get rid of the issue but this is somewhat intentional, since apps will definitely want to do a full reset when changing displays anyhow (otherwise DPI/adapter changes will screw things up, and that's out of our control as long as both window size and drawable size are exposed at the same time.
Note that OpenGL still captures window events because of weird platform-specific issues like macOS and viewport stretching!
Fixes#5949
Ryan C. Gordon
slime
Sam Lantinga
Happy Harry
Aaron Barany
Sam Clegg
Jarod Hillman
zll
Frank Praznik
Ozkan Sezer
Ludovico de Nittis
Eric Curtin
Sylvain
Cameron Gutman
UnknownShadow200
zhailiangliang
past-due
Ivan Epifanov
Cameron Cawley
DS
xeonmc
Amir
Taiko2k
Shawn Hoffman
Brad Smith
Francisco Javier Trujillo Mata
Mathieu Eyraud
Steven Noonan
Anonymous Maarten
DomGries
Julio C. Rocha
Noel Berry
antonino
Luke Street
Ethan Lee
Your Name