- cmake, configure (CheckDLOPEN): --enable-sdl-dlopen is now history..
detach the dl api discovery from SDL_LOADSO_DLOPEN functionality.
define HAVE_DLOPEN. also define DYNAPI_NEEDS_DLOPEN (CheckDLOPEN is
called only for relevant platforms.)
- update SDL_config.in and SDL_config.cmake accordingly.
- SDL_dynapi.h: set SDL_DYNAMIC_API to 0 if DYNAPI_NEEDS_DLOPEN is
defined, but HAVE_DLOPEN is not.
- pthread/SDL_systhread.c: conditionalize dl api use to HAVE_DLOPEN
- SDL_x11opengl.c, SDL_DirectFB_opengl.c, SDL_naclopengles.c: rely
on HAVE_DLOPEN, not SDL_LOADSO_DLOPEN.
- SDL_config_android.h, SDL_config_iphoneos.h, SDL_config_macosx.h,
SDL_config_pandora.h, and SDL_config_wiz.h: define HAVE_DLOPEN.
Closes: https://github.com/libsdl-org/SDL/pull/4351
This is needed to support CHERI, and thus Arm's experimental Morello
prototype, where pointers are implemented using unforgeable capabilities
that include bounds and permissions metadata to provide fine-grained
spatial and referential memory safety, as well as revocation by sweeping
memory to provide heap temporal memory safety.
The referential safety is enforced through the use of tagged memory, and
there is only a single tag bit per capability-sized word, meaning it is
impossible to store capabilities at unaligned locations, either getting
a trap on load/store or the validity tag being stripped when
round-tripepd through memory.
Since this is a new ABI for which SDL has never been compiled before, we
do not need to be concerned with this compatibility measure, so just
don't pack the struct for CHERI architectures.
This code is inherently rather dubious anyway; if MSVC and GCC disagree
on struct layout when targeting Windows then that is a bug in GCC, but
likely extends from the bogus #pragma pack directives for MSVC in
begin_code.h, which will force types to be *underaligned* (and is
attempting to work around something that is fundamentally a broken idea
to be doing). In particular 8-byte-aligned types will be underaligned to
4 bytes, but only on MSVC. Since that code is not used for GCC that is
probably the cause of the struct layout discrepancy, and there are
likely other instances of that throughout SDL. Moreover, the supposed
fix here is not in fact a fix, as now GCC will think SDL_AudioCVT is
only 1-byte-aligned but MSVC will think it's 4-byte or 8-byte-aligned,
meaning ABI incomatibility is introduced by this change. However,
removing it would break ABI compatibility for purely-GCC-compiled code
(as old binaries would see the struct as 1-byte-aligned and new binaries
would see the struct as 8-byte-aligned) so SDL is stuck with this until
it bumps its ABI.
This is needed to support CHERI, and thus Arm's experimental Morello
prototype, where pointers are implemented using unforgeable capabilities
that include bounds and permissions metadata to provide fine-grained
spatial and referential memory safety, as well as revocation by sweeping
memory to provide heap temporal memory safety.
-Wundef errors from clang-11.1 when targeting macOS
Targeting i386 against 10.8 SDK:
In file included from src/SDL_assert.c:21:
In file included from src/./SDL_internal.h:52:
In file included from include/SDL_config.h:33:
include/SDL_platform.h:73:5: error: 'TARGET_OS_TV' is not defined, evaluates to 0 [-Werror,-Wundef-prefix=TARGET_OS_]
^
1 error generated.
src/joystick/iphoneos/SDL_mfijoystick.m:38:5: error: 'TARGET_OS_IOS' is not defined, evaluates to 0 [-Werror,-Wundef-prefix=TARGET_OS_]
^
src/joystick/iphoneos/SDL_mfijoystick.m:460:5: error: 'TARGET_OS_TV' is not defined, evaluates to 0 [-Werror,-Wundef-prefix=TARGET_OS_]
^
2 errors generated.
src/filesystem/cocoa/SDL_sysfilesystem.m:83:6: error: 'TARGET_OS_TV' is not defined, evaluates to 0 [-Werror,-Wundef-prefix=TARGET_OS_]
^
1 error generated.
Targeting x86_64 against 10.12 SDK:
src/video/SDL_video.c:1492:25: error: 'TARGET_OS_MACCATALYST' is not defined, evaluates to 0 [-Werror,-Wundef-prefix=TARGET_OS_]
^
1 error generated.
To enter Bluetooth pairing mode hold B and Action (button with circle) buttons for 3 seconds.
It works via usual HIDAPI if special filter driver is not installed:
https://www.amazon.com/gp/help/customer/display.html?nodeId=GZCT4CTFHXLHEB9T
With that driver installed it mimics Xbox One controller and works via XInput under Windows.
Under DInput this controller is not usable at all.
In a more ideal world, we'd use the appropriate `__attribute__` here, but
it's one thing in a public header that probably shouldn't be there at all, so
this is good enough for now.
Fixes#4307.
If you hide a window on Mutter, for example, the compositor never requests
new frames, which will cause Mesa to block forever in eglSwapBuffers to
satisfy the swap interval.
We now always set the swap interval to 0 and manage this ourselves, handing
the frame to Wayland when it requests a new one, and timing out at 10fps just
to keep apps moving if the compositor wants no frames at all.
My understanding is that other protocols are coming that might improve upon
this solution, but for now it solves the total hang.
Fixes#4335.
commit 6b8f933589aa3925978a23e77a305a7e89c6ae4a
Author: Xing Ji <jixingcn@gmail.com>
Date: Wed Mar 24 22:31:29 2021 +0800
update the dynapi by `gendynapi.pl`
commit ebd1790c19983b652713f40ab1e139e485e1a2b7
Author: Xing Ji <jixingcn@gmail.com>
Date: Wed Mar 24 22:17:48 2021 +0800
revert the change in src/dynapi
commit 734b5f85c1613070081e39238e84198128971b53
Merge: 5a56e5a8 5ac6bd54
Author: Xing Ji <jixingcn@gmail.com>
Date: Wed Mar 24 22:14:40 2021 +0800
Merge remote-tracking branch 'libsdl/main' into jixingcn
commit 5a56e5a8227d9cff6b497b681c618a76bec1cae1
Author: Xing Ji <jixingcn@gmail.com>
Date: Mon Mar 22 23:55:10 2021 +0800
Fix#3596, can call the `SDL_TLSCleanup` to cleanup the TLS data when closing the application
The llvm-mingw project includes cross-compilers targeting ARM: https://github.com/mstorsjo/llvm-mingw/releases
Currently, compilation fails with this configuration, because neon features are used as long as __ARM_NEON is defined, but arm_neon.h was not included.
This should not change anything at all within the compiled library, but it does make the header file easier to read for non-C programmers who don't expect an octal value.
In some cases, it can be useful to have the KMSDRM backend even if it cannot
be used for rendering. An app may want to use SDL for input processing while
using another rendering API (such as an MMAL overlay on Raspberry Pi) or
using its own code to render to DRM overlays that SDL doesn't support.
This also moves the check for DRM master to an earlier point where we can fail
initialization of the backend, rather than allowing the backend to initialize
then failing the creation of a window later.
SDL has been missing a bunch of these 'isX' functions for some time,
where X is some characteristic of a given character.
This commit adds the rest of them to the SDL stdlib, so now we have:
- SDL_isalpha()
- SDL_isalnum()
- SDL_isblank()
- SDL_iscntrl()
- SDL_isxdigit()
- SDL_ispunct()
- SDL_isprint()
- SDL_isgraph()
The DJGPP compiler emits many warnings for conflicts between print
format specifiers and argument types. To fix the warnings, I added
`SDL_PRIx32` macros for use with `Sint32` and `Uint32` types. The macros
alias those found in <inttypes.h> or fallback to a reasonable default.
As an alternative, print arguments could be cast to plain old integers.
I opted slightly for the current solution as it felt more technically correct,
despite making the format strings more verbose.
vladius
In SDL_cpuinfo.h it seems like <intrin.h> is not included when __clang__ is defined, as the comment in the file explicitly reads:
"Many of the intrinsics SDL uses are not implemented by clang with Visual Studio"
However, the SDL_endian.h header does include <intrin.h> without any precautions like:
>#ifdef _MSC_VER
>#include <intrin.h>
>#endif
Maybe it should be changed to something like:
>#ifdef _MSC_VER
>#ifndef __clang__
>#include <intrin.h>
>#endif
>#endif
By default, we will minimize the window when we receive Alt+Tab with a
full-screen keyboard grabbed window to allow the user to escape the
full-screen application.
Some applications like remote desktop clients may want to handle Alt+Tab
themselves, so provide an opt-out via SDL_HINT_ALLOW_ALT_TAB_WHILE_GRABBED=0.
This adds SDL_SetWindowKeyboardGrab(), SDL_GetWindowKeyboardGrab(),
SDL_SetWindowMouseGrab(), SDL_GetWindowMouseGrab(), and new
SDL_WINDOW_KEYBOARD_GRABBED flag. It also updates the test harness to exercise
this functionality and makes a minor fix to X11 that I missed in
https://hg.libsdl.org/SDL/rev/02a2d609369b
To fit in with this new support, SDL_WINDOW_INPUT_CAPTURE has been renamed to
SDL_WINDOW_MOUSE_CAPTURE with the old name remaining as an alias for backwards
compatibility with older code.
jibb
New hint to let the user opt out of having Switch controllers' Home button lit when opened.
This is more consistent with the Switch itself (which doesn't light the button normally) and may be preferred by users who may disconnect their controller without letting the application close it.
I think this warrants a Switch-specific hint because the default behaviour is unusual (inconsistent with using a Switch controller on a Switch itself or with some other programs on PC), and because of that it's distinct from other lights (the player number on Switch controllers and the player colour on PlayStation controllers).
Existing SDL applications may not know about the need to set a specific
hint to enable rumble on PS5 controllers, even though they may already
set the equivalent SDL_HINT_JOYSTICK_HIDAPI_PS4_RUMBLE hint for PS4
controller rumble support.
Rather than requiring those developers update their apps, let's use the
SDL_HINT_JOYSTICK_HIDAPI_PS4_RUMBLE value as an indication of the behavior
they are expected for all PlayStation controllers.
sashikknox
In some cases, need create EGLWindow with SDLWindow. In X11 i can get pointer to NativeWindow from **struct SDL_SysWMinfo wmInfo**
```C++
struct SDL_SysWMinfo wmInfo;
SDL_GetWindowWMInfo(ptSDLWindow, &wmInfo)
#if defined(__unix__) && defined(SDL_VIDEO_DRIVER_X11)
nativeWindow=(EGLNativeWindowType)wmInfo.info.x11.window;
nativeDisplay=(EGLNativeDisplayType)wmInfo.info.x11.display;
#endif
```
than i can create EGLSurface
```
eglCreateWindowSurface(nativeDisplay, EGL_CONFIG, nativeWindow, SURFACE_ATTRIBUTES);
```
in Wayland i can do it with same way, just need pointer to **EGLWindow**, we already have pointer to **wl_display** from **SDL_sysWMInfo**, need add to **wl** struct in SDL_SysWMInfo another pointer to **struct wl_egl_window *egl_window;**. And in wayland backend, in function **Wayland_GetWindowWMInfo** return pointer to **egl_window** from **SDL_WindowData**
Now i use patched statically built SDL2 in port of Quake 2 GLES2 for SailfishOS (it use QtWayland):
link to SDL2 commit and changed string for patch:
- 6858a618cd
- b1e29e87b9/SDL2/src/video/wayland/SDL_waylandwindow.c (L463)
link to use in Quake2 port:
1. here i get pointer to EGLNativeWindowType: 6d94fedb1b/Engine/Sources/Compatibility/OpenGLES/EGLWrapper.c (L319)
2. then use it for create EGLSurface: 6d94fedb1b/Engine/Sources/Compatibility/OpenGLES/EGLWrapper.c (L391)
wahil1976
This patch adds a written-from-scratch WSCONS driver for OpenBSD. It does not have hardcoded keymaps, and it features mouse support when wsmux is available.
For this to work, it needs access to the /dev/wskbd* devices which are not available to non-root users by default. Access to those can be granted by changing /etc/fbtab to give the logging user the ownership of those devices.
__builtin_bswap32/64 were introduced in GCC 4.3. __builtin_bswap16 was
not available on x86 until GCC 4.8 due to a bug.
__builtin_bswap32/64 were introduced in Clang 2.6. __builtin_bswap16
was introduced in Clang 3.2.
C.W. Betts
I tested building commit http://hg.libsdl.org/SDL/rev/7adf3fdc19f3 on Mac Catalyst and found some issues:
* MTLFeatureSet_iOS_* enums aren't available under Mac Catalyst.
* OpenGL ES is unavailable under Mac Catalyst.
* Some Metal features are available under Catalyst but not iOS, such as displaySyncEnabled.
* Set Metal as the default renderer on Mac Catalyst
Attaching a patch that will make SDL2 build for Mac Catalyst.
Is automatically used when the SRW SDL_mutex implementation is active.
Otherwise falls back to the generic implementation.
v2: - Rebase onto master fa3ea1051a4b
Cameron Cawley
stdlib: Added SDL_round, SDL_roundf, SDL_lround and SDL_lroundf
The default implementation is based on the one used in the Windows RT video driver.
Keep Semaphore Kernel Object impl for Windows 7 and older - choose at runtime
v2: - Fix mixed int/LONG types
- Reorder definitions
- Add missing include
v3: - Use `GetModuleHandle()` to load the API Set
v2: - Add SRW definitions as suggested by Ozkan Sezer
Allows building against older platform headers.
- Rename "hidden" function parameter `mutex_` to `_mutex`
v3: - Use GetModuleHandle instead of LoadLibrary
- Fix typo in comment
Added a hint to control whether a separate thread should be used for joystick events.
This is off by default because dispatching messages in other threads appears to cause problems on some versions of Windows.
Vincent Hamm
Xcode11 and ios13 added support for metal simulator.
Here is a quick and dirty patch to enable it. Pretty early and only tested on a few samples for now. Required mostly to enable metal support on correct version of ios, generate simulator compatible shaders and enforce buffer alignments on simulator (same as osx).
Alex S
Evdev headers aren't actually included in the base system (well, it has a private copy), they are available through the devel/evdev-proto port instead. We also have devel/libinotify and devel/libudev-devd shims, I didn't verify whether they work with SDL.
C.W. Betts
As it is, SDL2's built-in config on macOS for Metal excludes Apple Silicon. This is due to thinking that the 64-bit Mac platform would always be x86_64. My patch fixes this by using the catch-all of 64-bit platforms.
C.W. Betts
This patch adds support to the GameController framework on macOS Big Sur and later, adding support for MFi controllers as well as rumble support for PS4 and Xbox One. There is some code to make sure that the IOKit joystick handler doesn't include two controllers at once.
While the GameController framework is present in earlier versions of macOS, there was no public, approved way of checking if a specific IOHIDDevice is a controller that GameController could handle. This was changed in Big Sur.
Added support for the PS4 controller gyro and accelerometer on iOS and HIDAPI drivers
Also fixed an issue with the accelerometer on iOS having inverted axes
The configure/cmake scripts were checking for these functions but we didn't
have the SDL_config.h.* pieces in place. The other config headers are best
guesses.
As the name suggests, the hint should only apply to SDL_THREAD_PRIORITY_TIME_CRITICAL
The resulting priorities for my current distro result in these values:
| High | Time Critical
Hint |--------------|-----------------
0 | P=10 N=-10 | P=5 N=-15
1 | P=10 N=-10 | P=-21 N=0
wahil1976
This patch adds the KBIO text input driver for FreeBSD, which allows text input to fully work without text spilling out into the console. It also supports accented input, AltGr keys and Alt Lock combinations.
Tested with US accent keys layout and various AltGr layouts.
When we request realtime priority from rtkit, we have a rttime limit. If we exceed
that limit, the kernel will send SIGKILL to the process to terminate it.
This isn't something that most high priority processes will want, only processes
that selectively opt into SCHED_RR/FIFO through SDL_HINT_THREAD_PRIORITY_POLICY
should be subject to this level of scrutiny.
This change:
* Switches non-apple posix OSs to use SCHED_OTHER instead of SCHED_RR
for SDL_THREAD_PRIORITY_HIGH/SDL_THREAD_PRIORITY_TIME_CRITICAL.
* Fixes using a hardcoded RLIMIT_RTTIME, instead queries it from rtkit
* Only sets RLIMIT_RTTIME for MakeRealtime rtkit requests
* Adds a note regarding the possible SIGKILL with SDL_HINT_THREAD_PRIORITY_POLICY
* Introduces SDL_HINT_THREAD_FORCE_REALTIME_TIME_CRITICAL to allow apps to acquire realtime scheduling policies on Linux
Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver
PS4 and PS5 controllers use AUX1 to represent the touchpad button
Nintendo Switch Pro controllers use AUX1 to represent the capture button
- SDL_config.h.in: add missing defines SDL_SENSOR_COREMOTION
and SDL_SENSOR_WINDOWS (configure did set SDL_SENSOR_WINDOWS
but it never went in SDL_config.h or Makefile.)
- SDL_config.h.cmake: remove duplicated SDL_SENSOR_XXX cmake
defines.
- autofoo, cmake: check for sensorsapi.h header before enabling
windows sensors.
Add hint SDL_HINT_ANDROID_BLOCK_ON_PAUSE_PAUSEAUDIO not to pause audio when
the app goes to background.
(It requires SDL_ANDROID_BLOCK_ON_PAUSE as "Non blocking")
that are mapped to it and automatically invalidate them when it is freed
- refcount is kept so that an external application can still create a reference
to SDL_Surface.
- lock_data was un-used and is now renamed and used as a list keep track of the blitmap
"In the second half of 2021, new apps will be required to publish with the Android App Bundle on Google Play"
(see https://developer.android.com/guide/app-bundle)
And "Android App Bundles don't support APK expansion (*.obb) files".
Rainer Deyke
While most of the KMOD_* flags are enums, the combination flags KMOD_CTRL, KMOD_ALT, KMOD_SHIFT and KMOD_GUI are defined as macros. This breaks third-party code that uses these KMOD_* names for local identifiers, such as OGRE. The correct thing to do is to make them all enums.
For systems without strlcpy and strlcat, just declare them as if they exist;
the analyzer possibly still knows the details of these functions and can
utilize that in its analysis.
Most of this patch was from meyraud705 at gmail and Martin Gerhardy. Thanks!
Fixes Bugzilla #5163.
Ellie
I just tripped over this: stb_image when requesting 3 channels with 8-bit actually returns them as 3 bytes per pixel with no alignment, so basically 4 pixels are 12 bytes with no padding (0...2, 3...5, 6...8, and 9...11). This I would have naively expected to be called RGB888 or BGR888, since there is no "dead" unused byte as I would expect for something called e.g. RGBX8888.
However, SDL2's SDL_PIXELFORMAT_BGR888 uses 4 bytes, same as SDL_PIXELFORMAT_BGRX8888, even though the latter appears to be a longer storage format - which it isn't, internally. It's just swapped, in byte order X, B, G, R (instead of BGRX). So why isn't the macro name also swapped, as "XBGR888" instead of just "BGR888"?
I find the formats therefore named inconsistently, and unless there is a reason for this I suggest these changes:
1. deprecate SDL_PIXELFORMAT_BGR888 in favor of a new SDL_PIXELFORMAT_XBGR8888
and
2. deprecate SDL_PIXELFORMAT_RGB888 in favor of a new SDL_PIXELFORMAT_XRGB8888
1. Comment that SDL_SetThreadPriority will make any necessary system changes when applying priority.
2. Add a hint to override SDL's default behavior for scheduler policy.
3. Modify the pthreads SDL_SetThreadPriority so that instead of just using the current thread scheduler policy it will change it to a policy that should work best for the requested priority.
4. Add hint checks in SDL_SetThreadPriority so that #3 can be overridden if desired.
5. Modify the Linux SDL_SetThreadPriority so that in the case that policy, either by SDL defaults or from the hint, is a realtime policy it uses the realtime rtkit API.
6. Prior to calling rtkit on Linux make the necessary thread state changes that rtkit requires. Currently this is done every time as it isn't expected that SDL_SetThreadPriority will be called repeatedly for a thread.
wengxt
Due to the new major fcitx version is coming close, the existing code need to be ported to use new Fcitx dbus interface.
The new dbus interface is supported by both fcitx 4 and 5, and has a good side effect, which is that it will work with flatpak for free. Also the patch remove the dependency on fcitx header. Instead, it just hardcodes a few enum value in the code so need to handle the different header for fcitx4 or 5.
meyraud705
I see how the documentation is confusing. I think that the choice of the axis is an implementation detail. The documentation should state the goal of this value, so I propose this wording:
"Use this value to play an effect on the steering wheel axis. This provides
better compatibility across platforms and devices as SDL will guess the
correct axis."
Value could even be renamed 'SDL_HAPTIC_STEERING_AXIS'.
For Linux, sending an effect on the X axis with a Logitech wheel works. Others brands don't have driver for Linux as far as I know.
This is only supported on PulseAudio. You can set a description when opening
your audio device that will show up in pauvcontrol, which lets you set
per-stream volume levels.
Fixes Bugzilla #4801.
This driver supports the Razer Atrox Arcade Stick
Some of the quirks of this driver, inherent in Windows Gaming Input:
* There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers.
* You can't read the state of the guide button
* You can't get controller events in the background
Caleb Cornett
Just ran into this, and from my testing, whatever re-added the dependency is a _major_ regression. Not only is your app forced to link with CoreBluetooth, but iOS has apparently tightened up security and won't even let you _test_ your app unless it specifies the NSBluetoothAlwaysUsageDescription in an Info.plist. It doesn't even pop up an error message, it just straight up crashes.
Adding the permission isn't a good solution either, since I'd really, really rather not have my app request users' bluetooth to always be enabled, especially if the only apparent reason is for Steam Controller support.
Caleb Cornett's comments:
"A few weeks ago, Alex added a partial Metal API to SDL2:
https://hg.libsdl.org/SDL/rev/22c8e7cd8d38
I noticed it was missing a few features that would help Metal become a
first-class citizen in SDL, so I went ahead and wrote them! Here are the new
APIs:
1. SDL_WINDOW_METAL flag for SDL_CreateWindow(). This allows the programmer
to specify that they intend to create a window for use with SDL_MetalView.
The flag is used to ensure correct usage of the API and to prevent
accidentally defaulting to OpenGL on iOS.
2. SDL_Metal_GetLayer(). This function takes a SDL_MetalView and returns a
pointer to the view's backing CAMetalLayer. This simplifies things
considerably, since in the current version of the SDL_Metal API the
programmer is required to bridge-cast a SDL_MetalView handle to an NSView or
UIView (depending on the platform) and then extract the layer from there.
SDL_Metal_GetLayer automatically handles all of that, making the operation
simple and cross-platform.
3. SDL_Metal_GetDrawableSize(). This function already exists in the current
SDL_Metal API (and is used behind-the-scenes for SDL_Vulkan_GetDrawableSize
on Apple platforms) but was not publicly exposed. My patch exposes this
function for public use. It works just like you'd expect.
Tested on macOS 10.14 and iOS 12.4."
Fixes Bugzilla #4796.
meyraud705
Added Linux implementation, otherwise you get "Unsupported direction type" error.
Added documentation to explain why one would use SDL_HAPTIC_FIRST_AXIS.
Mathieu Laurendeau
Consider a device supporting effects on multiple axes.
There's currently no way to play effects against a single-axis direction.
A device supporting effects against X and Y may not allow to play effects with a two-axis direction coordinate, even if one of the coordinates is null.
My current (ugly) work around for this is to add a direction type SDL_HAPTIC_X_FORCE to play effects against a X-axis only direction (patch attached).
This issue impacted two GIMX users using the following wheels:
- Leo Bodnar SimSteering force feedback wheel
- Accuforce direct drive wheel
Playing constant/spring/damper effects against a X-axis direction worked well for the first wheel, but not for the second one.
A better strategy seems to play the effects against the first axis reported by the DirectInput enumeration.
This strategy also works with Logitech wheels (at least the DFGT).
It's been more than a year that I have the latest patch (playing effects against the first axis only) in the GIMX software. It's being used by thousands of people, mostly for adapting their FFB wheel to the PS4. I had no report that proves this strategy to be wrong.
Jimb Esser
Add new RawInput controller API, and improved correlation with XInput/WGI
Reorder joystick init so drivers can ask the others if they handle a device reliably
Do not poll disconnected XInput devices (major perf issue)
Fix various cases where incorrect correlation could happen
Simple mechanism for propagating unhandled Guide button presses even before guaranteed correlation
Correlate by axis motion as well as button presses
Fix failing to zero other trigger
Fix SDL_HINT_JOYSTICK_HIDAPI not working if set before calling SDL_Init()
Add missing device to device names
Disable RawInput if we have a mismatch of XInput-capable but not RawInput-capable devices
Updated to SDL 2.0.13 code with the following notes:
New HID driver: xbox360w - no idea what that is, hopefully urelated
SDL_hidapijoystick.c had been refactored to couple data handling logic with device opening logic and device lists caused some problems, yields slightly uglier integration than previously when the 360 HID device driver was just handling the data.
SDL_hidapijoystick.c now often pulls the device off of the joystick_hwdata structure for some rumble logic, but it appears that code path is never reached, so probably not a problem.
Looks like joystick_hwdata was refactored to not include a mutex in other drivers, maintainers may want to do the same refactor here if that's useful for some reason.
Something changed in how devices get names, so getting generic names.
Had to fix a (new?) bug where removing an XInput controller caused existing controllers (that moved to a new XInput index) to get identified as 0x045e/0x02fd ("it's probably Bluetooth" in code), rendering the existing HIDAPI_IsDevicePresent and new RAWINPUT_IsDevicePresent unreliable.
David Ludwig
I have created a new driver for SDL's Joystick and Game-Controller subsystem: a Virtual driver. This driver allows one to create a software-based joystick, which to SDL applications will look and react like a real joystick, but whose state can be set programmatically. A primary use case for this is to help enable developers to add touch-screen joysticks to their apps.
The driver comes with a set of new, public APIs, with functions to attach and detach joysticks, set virtual-joystick state, and to determine if a joystick is a virtual-one.
Use of virtual joysticks goes as such:
1. Attach one or more virtual joysticks by calling SDL_JoystickAttachVirtual. If successful, this returns the virtual-device's joystick-index.
2. Open the virtual joysticks (using indicies returned by SDL_JoystickAttachVirtual).
3. Call any of the SDL_JoystickSetVirtual* functions when joystick-state changes. Please note that virtual-joystick state will only get applied on the next call to SDL_JoystickUpdate, or when pumping or polling for SDL events (via SDL_PumpEvents or SDL_PollEvent).
Here is a listing of the new, public APIs, at present and subject to change:
------------------------------------------------------------
/**
* Attaches a new virtual joystick.
* Returns the joystick's device index, or -1 if an error occurred.
*/
extern DECLSPEC int SDLCALL SDL_JoystickAttachVirtual(SDL_JoystickType type, int naxes, int nballs, int nbuttons, int nhats);
/**
* Detaches a virtual joystick
* Returns 0 on success, or -1 if an error occurred.
*/
extern DECLSPEC int SDLCALL SDL_JoystickDetachVirtual(int device_index);
/**
* Indicates whether or not a virtual-joystick is at a given device index.
*/
extern DECLSPEC SDL_bool SDLCALL SDL_JoystickIsVirtual(int device_index);
/**
* Set values on an opened, virtual-joystick's controls.
* Returns 0 on success, -1 on error.
*/
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualAxis(SDL_Joystick * joystick, int axis, Sint16 value);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualBall(SDL_Joystick * joystick, int ball, Sint16 xrel, Sint16 yrel);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualButton(SDL_Joystick * joystick, int button, Uint8 value);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualHat(SDL_Joystick * joystick, int hat, Uint8 value);
------------------------------------------------------------
Miscellaneous notes on the initial patch, which are also subject to change:
1. no test code is present in SDL, yet. This should, perhaps, change. Initial development was done with an ImGui-based app, which potentially is too thick for use in SDL-official. If tests are to be added, what kind of tests? Automated? Graphical?
2. virtual game controllers can be created by calling SDL_JoystickAttachVirtual with a joystick-type of SDL_JOYSTICK_TYPE_GAME_CONTROLLER, with naxes (num axes) set to SDL_CONTROLLER_AXIS_MAX, and with nbuttons (num buttons) set to SDL_CONTROLLER_BUTTON_MAX. When updating their state, values of type SDL_GameControllerAxis or SDL_GameControllerButton can be casted to an int and used for the control-index (in calls to SDL_JoystickSetVirtual* functions).
3. virtual joysticks' guids are mostly all-zeros with the exception of the last two bytes, the first of which is a 'v', to indicate that the guid is a virtual one, and the second of which is a SDL_JoystickType that has been converted into a Uint8.
4. virtual joysticks are ONLY turned into virtual game-controllers if and when their joystick-type is set to SDL_JOYSTICK_TYPE_GAMECONTROLLER. This is controlled by having SDL's default list of game-controllers have a single entry for a virtual game controller (of guid, "00000000000000000000000000007601", which is subject to the guid-encoding described above).
5. regarding having to call SDL_JoystickUpdate, either directly or indirectly via SDL_PumpEvents or SDL_PollEvents, before new virtual-joystick state becomes active (as specified via SDL_JoystickSetVirtual* function-calls), this was done to match behavior found in SDL's other joystick drivers, almost all of which will only update SDL-state during SDL_JoystickUpdate.
6. the initial patch is based off of SDL 2.0.12
7. the virtual joystick subsystem is disabled by default. It should be possible to enable it by building with SDL_JOYSTICK_VIRTUAL=1
Questions, comments, suggestions, or bug reports very welcome!
Martin Fiedler
To be precise, this is about *desktop OpenGL* on X11. For OpenGL ES, EGL is already used (as it's the only way to get an OpenGL ES context), as Sylvain noted above.
To shine some light on why this is needed:
In 99% of all cases, using GLX on X11 is fine, even though it's effectively deprecated in favor of EGL [1]. However, there's at least one use case that *requires* the OpenGL context being created with EGL instead of GLX, and that's DRM_PRIME interoperability: The function glEGLImageTargetTexture2DOES simply doesn't work with GLX. (Currently, Mesa actually crashes when trying that.)
Some example code:
https://gist.github.com/kajott/d1b29c613be30893c855621edd1f212e
Runs on Intel and open-source AMD drivers just fine (others unconfirmed), but with #define USE_EGL 0 (i.e. forcing it to GLX), it crashes. The same happens when using SDL for window and context creation.
The good news is that most of the pieces for EGL support on X11 are already in place: SDL_egl.c is pretty complete (and used for desktop OpenGL on Wayland, for example), and SDL_x11opengl.c has the aforementioned OpenGL-ES-on-EGL support. However, when it comes to desktop OpenGL, it's hardcoded to fall back to GLX.
I'm not advocating to make EGL the default for desktop OpenGL on X11; don't fix what ain't broken. But something like an SDL_HINT_VIDEO_X11_FORCE_EGL would be very appreciated to make use cases like the above work with SDL.
[1] source: Eric Anholt, major Linux graphics stack developer, 7 years ago already - see last paragraph of https://www.phoronix.com/scan.php?page=news_item&px=MTE3MTI
Konrad
This kind of blending is rather quite useful and in my opinion should be available for all renderers. I do need it myself, but since I didn't want to use a custom blending mode which is supported only by certain renderers (e.g. not in software which is quite important for me) I did write implementation of SDL_BLENDMODE_MUL for all renderers altogether.
SDL_BLENDMODE_MUL implements following equation:
dstRGB = (srcRGB * dstRGB) + (dstRGB * (1-srcA))
dstA = (srcA * dstA) + (dstA * (1-srcA))
Background:
https://i.imgur.com/UsYhydP.png
Blended texture:
https://i.imgur.com/0juXQcV.png
Result for SDL_BLENDMODE_MOD:
https://i.imgur.com/wgNSgUl.png
Result for SDL_BLENDMODE_MUL:
https://i.imgur.com/Veokzim.png
I think I did cover all possibilities within included patch, but I didn't write any tests for SDL_BLENDMODE_MUL, so it would be lovely if someone could do it.
Konrad
This was something rather trivial to add, but asked at least several times before (I did google about it as well).
It should be possible to dynamically change scaling mode of the texture. It is actually trivial task, but until now it was only possible with a hint before creating a texture.
I needed it for my game as well, so I took the liberty of writing it myself.
This patch adds following functions:
SDL_SetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode scaleMode);
SDL_GetTextureScaleMode(SDL_Texture * texture, SDL_ScaleMode *scaleMode);
That way you can change texture scaling on the fly.
Added the functions SDL_JoystickFromPlayerIndex(), SDL_JoystickSetPlayerIndex(), SDL_GameControllerFromPlayerIndex(), and SDL_GameControllerSetPlayerIndex()
Aaron Barany
Add SDL_HINT_VIDEO_EXTERNAL_CONTEXT hint to notify SDL that the graphics context is external. This disables the automatic context save/restore behavior on Android and avoids using OpenGL by default when SDL_WINDOW_VUKLAN isn't set.
When the application wishes to manage the OpenGL contexts on Android, this avoids cases where SDL unbinds the context and creates new contexts, which can interfere with the application's operation.
When using Vulkan and Metal renderer implementations, this avoids SDL forcing OpenGL to be enabled on certain platforms. While using the SDL_WINDOW_VULKAN flag can be used to achieve the same thing, it also causes Vulkan to be loaded. If the application uses Vulkan directly, this is not necessary, and fails window creation when using Metal due to Vulkan not being present. (assuming MoltenVK isn't installed)
Using (1 << 14) instead of 0x4000 might be clearer for the maintainer, but
it makes it harder to look up these flags when debugging an app. The value
has to be written once by one person, the has to be read by tons of people
over and over.
The Offscreen video driver is intended to be used for headless rendering
as well as allows for multiple GPUs to be used for headless rendering
Currently only supports EGL (OpenGL / ES) or Framebuffers
Adds a hint to specifiy which EGL device to use: SDL_HINT_EGL_DEVICE
Adds testoffscreen.c which can be used to test the backend out
Disabled by default for now
When using a recent version of CMake (3.14+), this should make it possible to:
- build SDL for iOS, both static and dynamic
- build SDL test apps (as iOS .app bundles)
- generate a working SDL_config.h for iOS (using SDL_config.h.cmake as a basis)
To use, set the following CMake variables when running CMake's configuration stage:
- CMAKE_SYSTEM_NAME=iOS
- CMAKE_OSX_SYSROOT=<SDK> (examples: iphoneos, iphonesimulator, iphoneos12.4, /full/path/to/iPhoneOS.sdk, etc.)
- CMAKE_OSX_ARCHITECTURES=<semicolon-separated list of CPU architectures> (example: "arm64;armv7s")
Examples:
- for Simulator, using the latest, installed SDK:
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64
- for Device, using the latest, installed SDK, 64-bit only
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES=arm64
- for Device, using the latest, installed SDK, mixed 32/64 bit
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos -DCMAKE_OSX_ARCHITECTURES="arm64;armv7s"
- for Device, using a specific SDK revision (iOS 12.4, in this example):
cmake path/to/SDL -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphoneos12.4 -DCMAKE_OSX_ARCHITECTURES=arm64
- for Simulator, using the latest, installed SDK, and building SDL test apps (as .app bundles):
cmake path/to/SDL -DSDL_TEST=1 -DCMAKE_SYSTEM_NAME=iOS -DCMAKE_OSX_SYSROOT=iphonesimulator -DCMAKE_OSX_ARCHITECTURES=x86_64
This is currently supported on Linux and macOS. iOS and Android are not
supported at all, Windows support could be added with some changes to the libusb
backend. The Visual Studio and Xcode projects do not use this feature.
Based on Valve Software's hid.cpp, written in collaboration with Andrew Eikum.
The real problem is that SDL_atomic.c was built in thumb mode instead of ARM mode, which is required to use the mcr instruction on ARM platforms. Added a compiler error to catch this case so we don't generate code that does infinite recursion.
I also added a potentially better way to handle things on Linux ARM platforms, based on comments in the Chromium headers, which we can try out after 2.0.10 ships.
It causes the HIDAPI devices to always be opened on enumeration, which causes crashes in the Windows drivers when multiple applications are reading and writing at the same time. We can revisit this after 2.0.10 release.
Dzmitry Malyshau
Current code, search paths, and error messages are written to only consider MoltenVK on macOS as a Vulkan Portability implementation. It's not the only implementation available to the users. gfx-portability [1] has been shown to run a number of titles well, including Dota2, Dolphin Emulator, and vkQuake3, often out-performing MoltenVK in frame rate and stability (see Dolphin benchmark [2]).
There is no reason for SDL to be that specific, it's not using any MVK-specific functions other than the WSI initialization ("VK_MVK_macos_surface"). gfx-portability exposes this extension as well, and a more generic WSI extension is in process. It would be good if SDL was written in a more generic way that expect a Vulkan Portability library as opposed to MoltenVK specifically.
[1] https://github.com/gfx-rs/portability
[2] https://gfx-rs.github.io/2019/03/22/dolphin-macos-performance.html
Simon Hug
Attached is a minor cleanup patch. It changes the option name of one hint to something better, puts one or two more checks in, and adds explicit casting where warnings could appear otherwise.
I hope the naming of the hints and their options is acceptable. It would be kind of awkward to change them after they get released with an official SDL version.
Simon Hug
I had a look at this and made some additions to SDL_wave.c.
The attached patch adds many checks and error messages. For some reason I also added A-law and ?-law decoders. Forgot exactly why... but hey, they're small.
The WAVE format is seriously underspecified (at least by the documents that are publicly available on the internet) and it's a shame Microsoft never put something better out there. The language used in them is so loose at times, it's not surprising the encoders and decoders behave very differently. The Windows Media Player doesn't even support MS ADPCM correctly.
The patch also adds some hints to make the decoder more strict at the cost of compatibility with weird WAVE files.
I still think it needs a bit of cleaning up (Not happy with the MultiplySize function. Don't like the name and other SDL code may want to use something like this too.) and some duplicated code may be folded together. It does work in this state and I have thrown all kinds of WAVE files at it. The AFL files also pass with it and some even play (obviously just noise). Crafty little fuzzer.
Any critique would be welcome. I have a fork of SDL with a audio-loadwav branch over here if someone wants to use the commenting feature of Bitbucket:
https://bitbucket.org/ChliHug/SDL
I also cobbled some Lua scripts together to create WAVE test files:
https://bitbucket.org/ChliHug/gendat
ace
I got this bug in SDL_ttf:
https://bugzilla.libsdl.org/show_bug.cgi?id=4524
Sylvain proposed solution:
SDL_RWseek(RWops, 0, RW_SEEK_SET);
And it works, but i can use it my project, because it written in C# with SDL2-CS wrapper and there not export for macroses:
#define SDL_RWsize(ctx) (ctx)->size(ctx)
#define SDL_RWseek(ctx, offset, whence) (ctx)->seek(ctx, offset, whence)
#define SDL_RWtell(ctx) (ctx)->seek(ctx, 0, RW_SEEK_CUR)
#define SDL_RWread(ctx, ptr, size, n) (ctx)->read(ctx, ptr, size, n)
#define SDL_RWwrite(ctx, ptr, size, n) (ctx)->write(ctx, ptr, size, n)
#define SDL_RWclose(ctx) (ctx)->close(ctx)
Therefore, I suggest replacing this macros with functions so that they can be exported and used in bindings
java layer runs as if separate mouse and touch was 1,
Use SDL_HINT_MOUSE_TOUCH_EVENTS and SDL_HINT_TOUCH_MOUSE_EVENTS
for generating synthetic touch/mouse events
Note that a single USB device is responsible for all 4 joysticks, so a large
rewrite of the DeviceDriver functions was necessary to allow a single device to
produce multiple joysticks.
Visual Studio doesn't define __ARM_ARCH nor _ARM_NEON, but _M_ARM and _M_ARM64,
so SDL_HasNEON() was bypassed.
PF_ARM_NEON_INSTRUCTIONS_AVAILABLE doesn't see to be defined (but still works
when defined as 19).
Only __ARM_NEON is defined with Android NDK and arm64-v8a
Tested on ndk-r18, ndk-r13 and also Xcode.
(Visual Studio needs a different fix).
Fixes Bugzilla #4409.
Luke Dashjr
Bug 3993 was "fixed" by #undef'ing bool. But this breaks C99's stdbool.h bool too.
For example, mpv's build fails with:
../audio/out/ao_sdl.c:35:5: error: unknown type name ?bool?
It seems ill-advised to be #undef'ing *anything* here - what if the code including SDL_cpuinfo.h actually wants to use altivec?
Daniel Gibson
Even though my game (dhewm3) doesn't use SDL_INIT_JOYSTICK, SDL_PumpEvent() calls SDL_JoystickUpdate() which ends up calling hid_enumerate() every three seconds, and sometimes on my Win7 box hid_enumerate() takes about 5 seconds, which causes the whole game to freeze for that time.
zen3d
While trying to build Pixie lisp (https://github.com/pixie-lang/pixie), which uses SDL for multimedia output, the mandelbrot example won't build. The problem is that internally pixie uses a templated function to dump a value, and gcc chokes because SDL_PIXELFORMAT_RGA8888 is an anonymous enum.
I solved the problem locally by changing from:
enum {
SDL_PIXELFORMAT_UNKNOWN,
... etc. ...
SDL_PIXELFORMAT_YUYV = ... etc ...
};
to:
typedef enum {
SDL_PIXELFORMAT_UNKNOWN,
... etc. ...
SDL_PIXELFORMAT_YUYV = ... etc ...
} SDL_PIXELFORMAT_ENUM;
The net result of this change is that the enum containing SDL_PIXELFORMAT_* is no longer an anonymous enum and can now be used by a templated function.
This local change fixes Pixie lisp for me.
I did notice that you use the idiom
typedef enum {
... etc ...
} SDL_FOO;
elsewhere in your code, so that change to SDL_PIXELFORMAT doesn't look like it would have a negative impact.
Touch device types include SDL_TOUCH_DEVICE_DIRECT (a touch screen with window-relative coordinates for touches), SDL_TOUCH_DEVICE_INDIRECT_ABSOLUTE (a trackpad-style device with absolute device coordinates), and SDL_TOUCH_DEVICE_INDIRECT_RELATIVE (a trackpad-style device with screen cursor-relative coordinates).
Phone screens are an example of a direct device type. Mac trackpads are the indirect-absolute touch device type. The Apple TV remote is an indirect-relative touch device type.
If you enable this, you'll need to link with CoreBluetooth.framework and add something like this to your Info.plist:
<key>NSBluetoothPeripheralUsageDescription</key>
<string>MyApp would like to remain connected to nearby bluetooth Game Controllers and Game Pads even when you're not using the app.</string>
Otherwise if SDL_POWER_DISABLED is disabled (eg with --disable-power):
... with clang -pedantic:
src/power/SDL_power.c:48:50: warning: use of GNU empty initializer extension [-Wgnu-empty-initializer]
static SDL_GetPowerInfo_Impl implementations[] = {
^
src/power/SDL_power.c:48:50: warning: zero size arrays are an extension [-Wzero-length-array]
2 warnings generated.
... with gcc -pedantic:
src/power/SDL_power.c:48:50: warning: ISO C forbids empty initializer braces [-Wpedantic]
src/power/SDL_power.c:48:50: warning: ISO C forbids empty initializer braces [-Wpedantic]
static SDL_GetPowerInfo_Impl implementations[] = {
^
src/power/SDL_power.c:48:30: error: zero or negative size array ?implementations?
static SDL_GetPowerInfo_Impl implementations[] = {
^~~~~~~~~~~~~~~
... with Watcom:
./src/power/SDL_power.c(85): Error! E1112: Initializer list cannot be empty
Author: Anthony Pesch <inolen@gmail.com>
Date: Fri May 4 20:21:21 2018 -0400
Added SDL_AUDIO_ALLOW_SAMPLES_CHANGE flag enabling users of SDL_OpenAudioDevice to get
the sample size of the actual hardware buffer vs having a stream created to handle the
delta
add HAVE_ENDPOINTVOLUME_H, HAVE_MMDEVICEAPI_H and HAVE_AUDIOCLIENT_H
in SDL_config.h.in, SDL_config.h.cmake, SDL_config_windows.h, and in
SDL_config_winrt.h.
Sylvain
Patch a few warnings when using:
-Wmissing-prototypes -Wdocumentation -Wdocumentation-unknown-command
They are automatically enabled with -Wall
Anthony @ POW Games
SDL_CreateTextureFromSurface makes an internal call to SDL_GetColorKey which can return an error and spams the error log with "Surface doesn't have a colorkey" even though the original function didn't return an error.
lectem
The SDL_syswm.h header includes the windows.h header after including begin_code.h which changes the structure packing alignment.
It seems this is not safe as suggested by the following warning :
warning C4121: 'JOBOBJECT_IO_RATE_CONTROL_INFORMATION_NATIVE_V2': alignment of a member was sensitive to packing
Felix Geyer
Forwarding from https://bugs.debian.org/892087 quoting verbatim:
The SDL2 header SDL_cpuinfo.h generates gcc warnings if the program using
it compiles with the -Wundef warning. (In particular, this means that QEMU
builds using it fail on at least sparc hosts, since QEMU dev builds
use both -Wundef and -Werror.).
/usr/include/SDL2/SDL_cpuinfo.h:63:5: warning: "HAVE_IMMINTRIN_H" is not defined, evaluates to 0 [-Wundef]
#if HAVE_IMMINTRIN_H && !defined(SDL_DISABLE_IMMINTRIN_H)
This tries to load vulkan.framework or libvulkan.1.dylib before MoltenVK.framework
or libMoltenVK.dylib. In the previous version, layers would not work for applications
run-time loading the default library.
Callum McGing
This patch allows the user to disable the behaviour that blocks the compositor through a new hint: SDL_VIDEO_X11_NET_WM_BYPASS_COMPOSITOR. This allows tools or other windowed applications to behave properly under KWin.
This variable can be set to the following values:
"0" - The indicator bar is not hidden (default for windowed applications)
"1" - The indicator bar is hidden and is shown when the screen is touched (useful for movie playback applications)
"2" - The indicator bar is dim and the first swipe makes it visible and the second swipe performs the "home" action (default for fullscreen applications)
Dominik Reichardt
As discussed in 2012 the iOS onscreen keyboard hides when you hit RETURN (see https://discourse.libsdl.org/t/on-screen-keyboard-change/19216).
IMO this is a bad idea to not be able to influence this behavior and just recently this was fixed for Android by adding the hint SDL_HINT_ANDROID_RETURN_HIDES_IME in changeset 11768 6ce3bb5e38a5.
bastien.bouclet
According to this GCC bug report, altivec.h requires building with the gnu extensions: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78263.
As an application developer, I don't want SDL to force me to enable the gnu extensions.
This isn't complete, but is enough to run testsprite2. It's currently
Mac-only; with a little work to figure out how to properly glue in a Metal
layer to a UIView, this will likely work on iOS, too.
This is only wired up to the configure script right now, and disabled by
default. CMake and Xcode still need their bits filled in as appropriate.
XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout
was WinRT, which still needed it as its primary audio target until the WASAPI
code code be made to work.
The support matrix now looks like:
WinXP: directsound by default, winmm as a fallback for buggy drivers.
Vista+: WASAPI (directsound and winmm as fallbacks for debugging).
WinRT: WASAPI
Andrey
Seems latest google angle library successfully built & tested under macOS'es.
https://github.com/google/angle
We need to use GLES2 to implement true cross-platform code.
New functions get and set the YUV colorspace conversion mode:
SDL_SetYUVConversionMode()
SDL_GetYUVConversionMode()
SDL_GetYUVConversionModeForResolution()
SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats.
Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
e_pluschauskas
I noticed that after updating SDL to 2.0.6 my application now exports SDL_main.
At GitHub SDL mirror (branch 2.0.5) SDL_main prototyped as
extern C_LINKAGE int SDL_main(int argc, char *argv[]);
but at branch 2.0.6 prototype is
extern C_LINKAGE DECLSPEC int SDL_main(int argc, char *argv[]);
SDL Wiki Bot
Sam Lantinga
Ozkan Sezer
Sebastian Krzyszkowiak
Ryan C. Gordon
Jessica Clarke
Simon Zeni
Christian Rauch
Joel Linn
Cameron Cawley
Dimitriy Ryazantcev
Ivan Epifanov
nia
Eric Wasylishen
Jupeyy
Cacodemon345
Ethan Lee
Joseph Lyncheski
Sylvain
Vladislav Dmitrievich Turbanov
Xing Ji
Esme
uyjulian
Lokathor
Frank Praznik
Cameron Gutman
Amir
Misa
Jay Petacat
Manuel Alfayate Corchete
JibbSmart
Mikhail Paulyshka
Ethan Lee
Kai Krakow
Sylvain Beucler
hmk
David Ludwig
EXL
Ben Avison
Brandon Schaefer
Alex Szpakowski
Jeremy Ong
Mark Callow
sezero
Brandon Schaefer
