Note that returning SDL_PIXELFORMAT_BGR24 instead of SDL_PIXELFORMAT_RGB24 seems necessary, otherwise when running with SDL_ACCELERATION=0, the red and blue channels of the window appeared swapped.
Note that when running with acceleration enabled, red and blue channel swapping does not happen regardless of whether SDL_PIXEL_FORMAT_RGB24 or SDL_PIXEL_FORMAT_BGR24 is returned.
For good measure, I also tested running with acceleration disabled in both 15 and 16 bit color depths, but red and blue channel swapping did not occur
This prevents a number of issues where devices are enumerated but not actually able to be opened, like https://github.com/libsdl-org/SDL/issues/5781.
We currently leave the devices open, allowing us to more easily do controller feature detection, protocol negotiation, detect dropped Bluetooth connections, etc. with the expectation that the application is likely to open the controllers shortly.
If multiple keys were simultaneously depressed and one was being repeated, the repeat flag was being cleared when any of the pressed keys were released, even if the released key wasn't the one being repeated.
This tracks the key currently being repeated and only clears the repeat flag when the particular key being repeated is released.
Silences clang -Wpragma warnings:
D:/a/SDL/SDL/src/video/windows/SDL_windowstaskdialog.h:21:10: warning: the current #pragma pack alignment value is modified in the included file [-Wpragma-pack]
#include <pshpack1.h>
^
D:/a/_temp/msys64/clang64/include/pshpack1.h:7:9: note: previous '#pragma pack' directive that modifies alignment is here
#pragma pack(push,1)
^
In file included from D:/a/SDL/SDL/src/video/windows/SDL_windowsmessagebox.c:35:
D:/a/SDL/SDL/src/video/windows/SDL_windowstaskdialog.h:156:10: warning: the current #pragma pack alignment value is modified in the included file [-Wpragma-pack]
#include <poppack.h>
^
note: previous '#pragma pack' directive that modifies alignment is here
2 warnings generated.
Closes: https://github.com/libsdl-org/SDL/issues/6240
Unfortunately the only way to detect this is to actually try opening a device, so we wait until the application tries, and then stop enumerating afterwards.
Fixes https://github.com/libsdl-org/SDL/issues/5781
This kicks in if the platform doesn't support vsync directly, or if the present fails for some reason (e.g. minimized on some platforms)
Fixes https://github.com/libsdl-org/SDL/issues/5134
X11 has a so-called primary selection, which you can use by marking text and middle-clicking elsewhere to copy the marked text.
There are 3 new API functions in `SDL_clipboard.h`, which work exactly like their clipboard equivalents.
## Test Instructions
* Run the tests (just a copy of the clipboard tests): `$ ./test/testautomation --filter Clipboard`
* Build and run this small application:
<details>
```C
#include <SDL.h>
#include <unistd.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
void print_error(const char *where)
{
const char *errstr = SDL_GetError();
if (errstr == NULL || errstr[0] == '\0')
return;
fprintf(stderr, "SDL Error after '%s': %s\n", where, errstr);
SDL_ClearError();
}
int main()
{
char text_buf[256];
srand(time(NULL));
SDL_Init(SDL_INIT_VIDEO);
print_error("SDL_INIT()");
SDL_Window *window = SDL_CreateWindow("Primary Selection Test", SDL_WINDOWPOS_UNDEFINED,
SDL_WINDOWPOS_UNDEFINED, 400, 400, SDL_WINDOW_SHOWN);
print_error("SDL_CreateWindow()");
SDL_Renderer *renderer = SDL_CreateRenderer(window, -1, SDL_RENDERER_ACCELERATED);
print_error("SDL_CreateRenderer()");
bool quit = false;
unsigned int do_render = 0;
while (!quit) {
SDL_Event event;
while (SDL_PollEvent(&event)) {
print_error("SDL_PollEvent()");
switch (event.type) {
case SDL_QUIT: {
quit = true;
break;
} case SDL_KEYDOWN: {
switch (event.key.keysym.sym) {
case SDLK_ESCAPE:
case SDLK_q:
quit = true;
break;
case SDLK_c:
snprintf(text_buf, sizeof(text_buf), "foo%d", rand());
SDL_SetClipboardText(text_buf);
print_error("SDL_SetClipboardText()");
printf("clipboard: set_to=\"%s\"\n", text_buf);
break;
case SDLK_v: {
printf("clipboard: has=%d, ", SDL_HasClipboardText());
print_error("SDL_HasClipboardText()");
char *text = SDL_GetClipboardText();
print_error("SDL_GetClipboardText()");
printf("text=\"%s\"\n", text);
SDL_free(text);
break;
} case SDLK_d:
snprintf(text_buf, sizeof(text_buf), "bar%d", rand());
SDL_SetPrimarySelectionText(text_buf);
print_error("SDL_SetPrimarySelectionText()");
printf("primselec: set_to=\"%s\"\n", text_buf);
break;
case SDLK_f: {
printf("primselec: has=%d, ", SDL_HasPrimarySelectionText());
print_error("SDL_HasPrimarySelectionText()");
char *text = SDL_GetPrimarySelectionText();
print_error("SDL_GetPrimarySelectionText()");
printf("text=\"%s\"\n", text);
SDL_free(text);
break;
} default:
break;
}
break;
} default: {
break;
}}
}
// create less noise with WAYLAND_DEBUG=1
if (do_render == 0) {
SDL_RenderPresent(renderer);
print_error("SDL_RenderPresent()");
}
do_render += 1;
usleep(12000);
}
SDL_DestroyRenderer(renderer);
SDL_DestroyWindow(window);
SDL_Quit();
print_error("quit");
return 0;
}
```
</details>
* Use c,v,d,f to get and set the clipboard and primary selection.
* Mark text and middle-click also in other applications.
* For wayland under x:
* `$ mutter --wayland --no-x11 --nested`
* `$ XDG_SESSION_TYPE=wayland SDL_VIDEODRIVER=wayland ./<path_to_test_appl_binary>`
Clip rectangle set to int(left+width/2) , int(top+height/2) , int(left+width/2)+1 , int(top+height/2)+1
a 1x1 box
On even-valued resolution, cursor is stable at bottom-right central pixel
On odd-valued resolution, cursor is stable at exact central pixel.
this is the desired behaviour
In some cases, a backbuffer size update may not be accompanied by a resize event if the window size and/or scale were updated before the new backbuffer size was recomputed. Instead of the scale, use the old/new backbuffer sizes to determine if a resize event is required so that a backbuffer size change will always be followed by a resize event.
Instead of wrapping individual calls to SDL_SetDisplayModeForDisplay(), just check the flag in the function itself and make it a NOP that cannot fail if the flag is set. Silences some errant "SDL video driver doesn't support changing display mode" log errors.
When hiding a window, libdecor can report bogus content region sizes that are +/- the height of the title bar. Ignore any size values from libdecor when hiding a window, or the size may be incorrect when restored.
The compositor can arbitrarily move windows between displays, including fullscreen windows. Update the internal state when a fullscreen window is moved so the internal SDL state accurately reflects the window location, and resize the window to fit the new display.
This also fixes an edge case where the compositor can make a window fullscreen on a different display than SDL thinks it will be on (usually when a window is made fullscreen by the compositor while straddling multiple displays), which can result in the window being incorrectly sized.
If additional fullscreen requests are received when the window is already fullscreen, it is typically due to the fullscreen flags or emulated video mode being changed. A commit must be explicitly triggered or the requested changes won't take effect until some other event, such as a resize or focus change, causes the changes to be committed.
The compositor can toggle the fullscreen state (via a hotkey or otherwise), so the internal SDL state must be updated accordingly when it does.
When toggling fullscreen via the compositor, SDL will attempt to use the last fullscreen flag explicitly set. If no flag was previously set, SDL_WINDOW_FULLSCREEN will be used if a window video mode was set, otherwise SDL_WINDOW_FULLSCREEN_DESKTOP will be used. If the previous flag was SDL_WINDOW_FULLSCREEN and the window video mode was cleared, it will revert to SDL_WINDOW_FULLSCREEN_DESKTOP.
SDL_Quit() should be the last SDL API that you call before exiting your application, and is intended to clean up all internal state.
If real-life applications are relying on thread-local storage after SDL_Quit() we could potentially add a hint to control this behavior.
Fixes https://github.com/libsdl-org/SDL/issues/6200
DS4Windows can create both emulated Xbox and emulated PS4 controllers, and we don't know which the user has it doing, so don't try to second guess it, just let it do it's thing. Users should follow the remapping software recommendations on when to enable/disable it for various situations.
Fixes https://github.com/libsdl-org/SDL/issues/6167
There is supposedly an OpenGL ES2 target that does not support precision specifiers. However, the existing logic to detect this is currently broken in two ways:
1) There's a typo of the `#ifdef` as `#if`.
2) Checking for `GL_FRAGMENT_PRECISION_HIGH` can not be the correct way to detect this platform. Other targets, including some desktops, will also not have this defined (for various reasons).
Because some of the shader code is missing precision specifiers, and because a default is ONLY provided if `GL_FRAGMENT_PRECISION_HIGH` is set, these other targets break.
Instead of 'hard-coding' the prologue string into shaders in the C source, use our ability to provide a list of strings to `glShaderSource` instead, leaving the determination to run-time.
This commit closes https://github.com/libsdl-org/SDL/pull/6182
build/.libs/SDL_hidapi.o: In function `SDL_EnableGameCubeAdaptors':
src/hidapi/SDL_hidapi.c:1593: undefined reference to `libusb_init'
src/hidapi/SDL_hidapi.c:1594: undefined reference to `libusb_get_device_list'
src/hidapi/SDL_hidapi.c:1596: undefined reference to `libusb_get_device_descriptor'
src/hidapi/SDL_hidapi.c:1604: undefined reference to `libusb_open'
src/hidapi/SDL_hidapi.c:1608: undefined reference to `libusb_kernel_driver_active'
src/hidapi/SDL_hidapi.c:1614: undefined reference to `libusb_claim_interface'
src/hidapi/SDL_hidapi.c:1623: undefined reference to `libusb_close'
src/hidapi/SDL_hidapi.c:1626: undefined reference to `libusb_free_device_list'
src/hidapi/SDL_hidapi.c:1628: undefined reference to `libusb_exit'
src/hidapi/SDL_hidapi.c:1609: undefined reference to `libusb_detach_kernel_driver'
src/hidapi/SDL_hidapi.c:1620: undefined reference to `libusb_attach_kernel_driver'
src/hidapi/SDL_hidapi.c:1615: undefined reference to `libusb_control_transfer'
src/hidapi/SDL_hidapi.c:1616: undefined reference to `libusb_release_interface'
build/.libs/SDL_hidapi.o: In function `SDL_hid_init_REAL':
src/hidapi/SDL_hidapi.c:1086: undefined reference to `libusb_init'
src/hidapi/SDL_hidapi.c:1087: undefined reference to `libusb_exit'
src/hidapi/SDL_hidapi.c:1088: undefined reference to `libusb_get_device_list'
src/hidapi/SDL_hidapi.c:1089: undefined reference to `libusb_free_device_list'
src/hidapi/SDL_hidapi.c:1090: undefined reference to `libusb_get_device_descriptor'
src/hidapi/SDL_hidapi.c:1091: undefined reference to `libusb_get_active_config_descriptor'
src/hidapi/SDL_hidapi.c:1092: undefined reference to `libusb_get_config_descriptor'
src/hidapi/SDL_hidapi.c:1093: undefined reference to `libusb_free_config_descriptor'
src/hidapi/SDL_hidapi.c:1094: undefined reference to `libusb_get_bus_number'
src/hidapi/SDL_hidapi.c:1095: undefined reference to `libusb_get_device_address'
src/hidapi/SDL_hidapi.c:1096: undefined reference to `libusb_open'
src/hidapi/SDL_hidapi.c:1097: undefined reference to `libusb_close'
src/hidapi/SDL_hidapi.c:1098: undefined reference to `libusb_claim_interface'
src/hidapi/SDL_hidapi.c:1099: undefined reference to `libusb_release_interface'
src/hidapi/SDL_hidapi.c:1100: undefined reference to `libusb_kernel_driver_active'
src/hidapi/SDL_hidapi.c:1101: undefined reference to `libusb_detach_kernel_driver'
src/hidapi/SDL_hidapi.c:1102: undefined reference to `libusb_attach_kernel_driver'
src/hidapi/SDL_hidapi.c:1103: undefined reference to `libusb_set_interface_alt_setting'
src/hidapi/SDL_hidapi.c:1104: undefined reference to `libusb_alloc_transfer'
src/hidapi/SDL_hidapi.c:1105: undefined reference to `libusb_submit_transfer'
src/hidapi/SDL_hidapi.c:1106: undefined reference to `libusb_cancel_transfer'
src/hidapi/SDL_hidapi.c:1107: undefined reference to `libusb_free_transfer'
src/hidapi/SDL_hidapi.c:1108: undefined reference to `libusb_control_transfer'
src/hidapi/SDL_hidapi.c:1109: undefined reference to `libusb_interrupt_transfer'
src/hidapi/SDL_hidapi.c:1110: undefined reference to `libusb_handle_events'
src/hidapi/SDL_hidapi.c:1111: undefined reference to `libusb_handle_events_completed'
collect2: ld returned 1 exit status
These report their VID/PID as a Nintendo Switch Pro controller, but they are actually left/right Joy-Cons. We'll fix up the joystick GUID so applications can handle them appropriately.
This reverts commit ff233fe306.
This doesn't compile cleanly with Visual Studio and I don't want to introduce any subtle issues because we're passing the wrong types of pointers to WGI functions.
This makes the joystick locking more robust by holding the lock while updating joysticks.
The lock should be held when calling any SDL joystick function on a different thread than the one calling SDL_PumpEvents() and SDL_JoystickUpdate().
It is now possible to hold the lock while reinitializing the joystick subsystem, however any open joysticks will become invalid and potentially cause crashes if used afterwards.
Fixes https://github.com/libsdl-org/SDL/issues/6063
In order to inhibit the screen saver, SDL currently uses
`org.freedesktop.ScreenSaver.Inhibit()` and, as a fallback, a protocol
specific method for X11 or Wayland.
Accessing `org.freedesktop.ScreenSaver` is usually not allowed when
inside a sandbox like Flatpak, unless the permission has been explicitly
granted to the application.
Another issue is that the Wayland protocol "Idle inhibit" is relatively
new and not yet widely adopted. For example Mutter still doesn't support
it.
For those reasons, when running under Flatpak or Snap, we should try to
inhibit the screen saver by using xdg-desktop-portal instead. This
should give us an higher chance of success.
Fixes: https://github.com/libsdl-org/SDL/issues/6075
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
Refactor the previous sandbox check in a standalone function that also
includes Snap support.
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
SDL_DBus_CallWithBasicReply() allows us to send a DBus message and get
its result, if it is a basic type, e.g. integer or string.
With this function we avoid duplicating code.
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
This is in the hope that revving the product version doesn't change the mapping, which is the case for some devices. In cases where it does, we just need to provide a mapping for each version of the product.
Adjust candidate count so list is not draw bigger that needed. This also fix potential uninitialised read of variable `candsize[i]` if `vertical` is false.
This is now used as a crc field in the mapping rather than directly in mapping guids, for better mapping compatibility between versions of SDL.
Added SDL_GetJoystickGUIDInfo() to get device information encoded in a joystick GUID, so that mapping programs can clear the CRC from the GUID when generating mappings.
sort_controllers.py has been updated to extract the CRC from mappings created by older mapping programs and convert it into the new crc field. It will also take the CRC into account when checking for duplicate mappings.
Also regenerated the GUIDs for the PS2/PSP/Vita controller mappings, fixing https://github.com/libsdl-org/SDL/issues/6151
This will make it possible to have mappings for different controllers
that have the same VID/PID. This happens frequently with some generic
controller boards that have been reused in many products.
Fixes https://github.com/libsdl-org/SDL/issues/6004
Update the Wayland core protocol spec file and add support for the new axis_value120 event to handle high resolution scroll wheels.
The axis_value120 replaces the axis_discrete event, which is no longer sent as of version 8 of the protocol. Note that unlike the axis_discrete event, no mention in the spec is made regarding how many axis_value120 events may occur per-axis per-frame, so the values are accumulated and committed when the pointer frame event occurs.
The libdecor header internally includes wayland-client.h, which pulls in the wayland-client-protocol.h file from the system include path and overrides the local one generated from the included Wayland protocol spec files. Move the Wayland protocol header inclusion above the libdecor header inclusion to ensure that the locally generated protocol header is used instead.
When minimizing a window, we get this sequence of events:
WM_WINDOWPOSCHANGING
WM_GETMINMAXINFO
WM_NCCALCSIZE
WM_WINDOWPOSCHANGED - IsIconic() is true
WM_MOVE
WM_SIZE - SDL sees minimized state here
When restoring a window, we get this sequence of events:
WM_WINDOWPOSCHANGING
WM_GETMINMAXINFO
WM_NCCALCSIZE
WM_NCPAINT
WM_ERASEBKGND
WM_WINDOWPOSCHANGED - IsIconic() is false
WM_MOVE
WM_SIZE - SDL sees restored state here
On Windows 10 a minimized window has a non-empty client rect, so we were delivering a minimized size before SDL knows that the window is minimized, and then ignoring the restored size when handling the restore message.
The fix is to use IsIconic() which returns the correct window state when WM_WINDOWPOSCHANGED is actually delivered.
Uses VK_EXT_metal_surface (vkCreateMetalSurfaceEXT)
when possible, otherwise falls back to the obsoleted
VK_MVK_macos_surface and VK_MVK_ios_surface.
Fixes#3906
If libdecor performs a commit with the frame title being undefined, a crash can occur within the library or its plugins. Always ensure that the title is set to a valid string to avoid this.
This prevents crashes when calling SDL joystick API functions from a different thread while disconnection is happening.
See https://github.com/libsdl-org/SDL/issues/6063 for a more thorough review of joystick locking.
Eliminate excessive calls to SetFullscreen by removing the calls in the libdecor and xdg-toplevel config callbacks.
These calls were being made there in case something explicitly called the window minimization function from within SDL, which unsets fullscreen, and as minimizing a window in Wayland is just a suggestion to the compositor and doesn't actually change the window state or communicate anything back to the application, it was necessary to call SetFullscreen in every call to the config functions just in case something minimized a window via SDL_MinimizeWindow() and later needed to restore it. GNOME in particular had issues when fullscreen set/unset operations were being hammered, leading to overlapping acks and commits when switching to fullscreen.
With the new video system flag to disable unsetting fullscreen when minimizing a window, these calls in the configuration functions are no longer needed and can be removed. This significantly reduces calls to the SetFullscreen() function, reverts #6044 while fixing the issue, and fixes a similar problem when hiding and showing a window initially created with fullscreen flags.
Add quirk flags to the video device struct and add flags to allow video backend drivers to disable mode switching and disable unsetting the fullscreen mode when minimizing a window. As certain platforms can have multiple video backends compiled in at once, #ifdefs, as used by other platforms, aren't suitable as different backends on the same platform may not need the same quirks.
This replaces the formerly dedicated 'disable_display_mode_switching' boolean as additional quirks are needed by the Wayland backend. Helper functions have also been added to simplify reading the flag states.
If the D-Bus subsystem is shutdown and restarted mid-execution, the cached connection will be invalid. Fetch it each time that it is used to ensure that the connection is always from the current context.
Don't call the roundtrip in ShowWindow unless restoring a previously hidden window. This fixes a regression in GNOME when creating a window with the fullscreen flag set, as the fullscreen window will be positioned down the screen by the height of the top bar if the window is made fullscreen on the primary display and the roundtrip is called when initially displaying the window.
SDL_CreateWindow() may call GetWindowDisplayIndex() to compute the position
of a new window that the caller has requested to be placed on a certain
display. Since we haven't fully constructed the window yet, our driverdata
will be nil and we will fail to get the NSScreen (which is fine). However,
we need to return an error (not 0, which is a valid display index) for
SDL_GetWindowDisplayIndex() to know to figure out the display index itself.
Fixes positioning new windows on secondary displays when using
SDL_WINDOWPOS_CENTERED_DISPLAY() and SDL_WINDOWPOS_UNDEFINED_DISPLAY().
OpenGL windows don't actually get the WM_WINDOWPOSCHANGED event in the SetWindowPos() call in WIN_SetWindowFullscreen(), so setting the window size to zero never gets reset and we're stuck with a zero sized window.
Instead, just force the resize event in WM_DPICHANGED handling, where we know we need it. If we end up needing to force it in WIN_SetWindowFullscreen(), just set a flag in the window data and respond to that in WM_WINDOWPOSCHANGED, but that's a fairly risky behavior change as suddenly all applications would start getting SDL_WINDOWEVENT_SIZE_CHANGED when going fullscreen, and they may respond to that in expensive and potentially disruptive ways.
For later we'll probably create a DPI changed event and respond to that in the renderer instead of this window size changed hack.
This fixes https://github.com/libsdl-org/SDL/issues/6033 @ericwa
The video core assumes that window->w/h will be updated before returning
from SetWindowFullscreen(). This is needed to generate a resize event
with the correct window size when exiting fullscreen.
The roundtrip allows us to receive the configure callback that informs
us of the new window size before returning.
Fixes#6043
We really only care about DPI changes here, so this both reduces work and also avoids weird cases where viewport state can be corrupted by trivial window events. This doesn't _completely_ get rid of the issue but this is somewhat intentional, since apps will definitely want to do a full reset when changing displays anyhow (otherwise DPI/adapter changes will screw things up, and that's out of our control as long as both window size and drawable size are exposed at the same time.
Note that OpenGL still captures window events because of weird platform-specific issues like macOS and viewport stretching!
Fixes#5949
- This allows looking up the display index for an arbitrary location rather than requiring an active window to do so.
- This change also reimplements the fallback display lookup that found the display with center closest to the window's center to instead find the display rect edge
closest to the window center (this was done in the almost identical display lookup used in SDL_windowsmodes.c, which now uses `SDL_GetPointDisplayIndex`). In
practice this should almost never be hit as it requires the window's center to not be enclosed by any display rect.
The current method of toggling the libdecor window visibility by destroying and recreating the frame results in a race where a use-after-free bug can manifest itself within libdecor when window visibility is toggled quickly. Instead, use the libdecor function for toggling visibility instead of destroying and recreating the frame every time.
Wayland works like SDL's "auto capture" feature already, tracking the mouse
globally only while a drag is occuring, and this is the only way to get mouse
input outside the window.
Setting this flag ourselves lets SDL_CaptureMouse() work in the most common
use case without actually implementing CaptureMouse for the backend, including
SDL's auto capture feature.
Fixes#6010.
This controller actually comes in at least two flavors: a GameCube controller and an arcade pad, neither of which should have the face buttons remapped.
This controller looks like a GameCube controller, is actually a Nintendo Switch controller, and shows up as an XInput device on Windows with the buttons already in the correct location.
The Nintendo Online Sega Genesis controller reports the SNES VID/PID over Bluetooth. This is a more robust way of handling future controllers as well, so let's go with this instead.
Also use full reports over Bluetooth, and don't report gyro for Nintendo Online classic controllers.
GNOME exposes the cursor size and theme via the org.freedesktop.portal.Settings interface of the xdg-desktop portal, so query these values via D-Bus, if available.
The XCURSOR_SIZE/XCURSOR_THEME envvars will be tried first, so as not to override any user specified sizes or themes, then D-Bus, then, failing that, it will fall back to default values.
The event no longer spams each time a window gets focus if there are windows on monitors with different color profiles.
This also has the side effect that you no longer get a color profile event at window creation, which is consistent with other events that communicate state changes.
Previously, calling SDL_SendWindowEvent for a SIZED_CHANGED event would
filter the queue to remove RESIZED and SIZED_CHANGED events, so you don't
overflow the queue with obsolete data, but any RESIZED events would be
lost in this process.
Now we note if there was a RESIZED pending and replace it with a new
event using the same dimensions as the new SIZED_CHANGED event. This fixes
cases where an app is only listening for RESIZED events and thus might
lose important information in some cases.
Fixes#5925.
This is necessary for consistent position reports with absolute mice
and improves application performance with relative mice by cutting the
number of reported mouse motion events roughly in half.
Use the xdg-desktop-portal interface to RealtimeKit1, when available, to set realtime scheduling and elevated priority for threads. This portal allows for the use of rtkit within containers such as Flatpak. It will fall back to using RealtimeKit1 directly if the xdg-desktop-portal interface is too old or not available.
* Added support for mini-gamepad mode for Joy-Con controllers, matching the mapping for hid-nintendo on Linux and iOS 16
* Added the ability to merge left and right Joy-Con controllers into a single Pro-style controller
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_SWITCH_COMBINE_JOY_CONS to control this merging functionality
* Removed the hint SDL_HINT_JOYSTICK_HIDAPI_JOY_CONS
* Added support for mini-gamepad mode for Joy-Con controllers, matching the mapping for hid-nintendo on Linux and iOS 16
* Added the ability to merge left and right Joy-Con controllers into a single Pro-style controller
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_SWITCH_COMBINE_JOY_CONS to control this merging functionality
* Removed the hint SDL_HINT_JOYSTICK_HIDAPI_JOY_CONS
- Touch events may be translated to mouse movement events without the normal Xinput2 raw motion events
being sent. Not all touch events will necessarily move the mouse but this ensures we update the global
mouse state just in case.
- Fix up some formatting
CR: saml
UnknownShadow200
Sam Lantinga
Frank Praznik
zhailiangliang
past-due
Ivan Epifanov
Ozkan Sezer
Cameron Cawley
DS
xeonmc
Amir
Taiko2k
Sylvain
Shawn Hoffman
Brad Smith
Francisco Javier Trujillo Mata
Ludovico de Nittis
Cameron Gutman
Mathieu Eyraud
Steven Noonan
Anonymous Maarten
DomGries
Julio C. Rocha
Noel Berry
antonino
slime
Ryan C. Gordon
Luke Street
Ethan Lee
Your Name
Guldoman
Salman Ahmed
pionere
Adam Butcher
David Carlier
Shootfast
Daniel Santos