Chromium will want to have both static and shared library versions of
Dawn to use in non-component and component builds respectively.
The *_export.h files are modified to noop when *_SHARED_LIBRARY is not
defined so that the static library doesn't export symbols that aren't
imported in dependents (this would break compilation on Windows).
A dawn_library_combo is introduced in BUILD.gn that factors out all the
logic needed to produce shared libraries and handle the _EXPORT macros.
Also contains a fix to dawncpp to export only the methods that aren't
defined in the header (otherwise they get defined multiple times)
BUG=dawn:85
Change-Id: Ib747deb9308e1165dd66002487147ba279d3eac0
Reviewed-on: https://dawn-review.googlesource.com/c/3761
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This adds a new FooBackend.cpp file for each backend that defines
exactly the symbols that are exported by libdawn_native's headers. THis
will allow factoring most of the compilation of dawn_native between the
shared and static library variants.
BUG=dawn:85
Change-Id: I69c808dac2fe5e8bb08356117e3997677787b08a
Reviewed-on: https://dawn-review.googlesource.com/c/3760
Reviewed-by: Stephen White <senorblanco@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
The backend had a "requiredInstanceExtensions" parameter to device
creation so that we could request the right instance extensions to
support swapchains. When we have dawn_native::Instance we don't want to
require this information before we can use the Vulkan backend. Instead
we make the backend always require all VkSurfaceKHR extensions. This
should be safe because these extensions basically enable copying a
struct into an opaque VkSurfaceKHR object and not much else.
BUG=dawn:29
Change-Id: I7fc5426f5770b65bb35f02793a1319eb0653782c
Reviewed-on: https://dawn-review.googlesource.com/c/3662
Reviewed-by: Stephen White <senorblanco@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
With adapters the Metal backend will be in charge of creating the
MTLDevice so we remove this responsibility from the bindings.
BUG=dawn:29
Change-Id: Id7b9e5f6249963e2b87a91242a18119ba8d11c13
Reviewed-on: https://dawn-review.googlesource.com/c/3661
Reviewed-by: Austin Eng <enga@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
The OpenGL backend can't gather discover default adapters because it
needs getProc to do anything so we add DiscoverAdapters method to
Instance that takes backend-specific options.
dawn_native::opengl::CreateDevice is removed in favor of the adapter
path so OpenGLBinding is modified to create an instance locally. This is
only temporary until all backends support adapters, at which point a lot
of *Binding code will be factored.
Also contains a small fix for Result<T, E> with movable types.
BUG=dawn:29
Change-Id: I4eb3d4a14a871af73e1872132aff72b45e5fe566
Reviewed-on: https://dawn-review.googlesource.com/c/3663
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
New objects are introduced to control what happens before device
creation in dawn_native:
- Instance: a connection from the application to dawn_native that is
used for dependency injection and to discover adapters.
- Adapters: represents the possibility of device creation for a specific
(GPU, backend) pair.
- BackendConnection: an internal object that standardizes the interface
between the frontend and backends.
The BackendConnection interface is implemented for the Null backend and
stubbed out in other backends. This allows this change to port the
ValidationTests to use the new Instance and Adapters concept and deal
with other backends later.
BUG=dawn:29
Change-Id: I19719a9342b4af091accc0c02fb6b9697eadde7b
Reviewed-on: https://dawn-review.googlesource.com/c/3500
Reviewed-by: Stephen White <senorblanco@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This adds a CheckVkSuccess utility function that adds the VkResult value
to the context lost error message.
Also adds a small fix to dawn_native/Error.h interoperability between
MaybeError and ResultOrError<NonPointer> with tests.
BUG=chromium:917555
BUG=dawn:79
Change-Id: Icc01122d62d83693fc0ea3f26b272f2372fd3087
Reviewed-on: https://dawn-review.googlesource.com/c/3623
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Both sampler and depth stencil include compare function, and we
need to change it to appropriate functions for different backends.
In order to avoid code duplication, we put it into a util file
for every backend, then include that file and call the function
from where we need it.
We can put similar functions which can be shared among different
objects into the util file in future.
Shaobo's patch has already created such a util function for compare
function for sampler. This patch removes the duplicated compare
function in RenderPipeline for depth stencil descriptor, and call
the function in util file instead.
BUG=dawn:31, dawn:47
Change-Id: Ia645b48e026b5a372d1023aa7e8ecdf1e4ed7c6d
Reviewed-on: https://dawn-review.googlesource.com/c/3641
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
WebGPUSampler is much more complete than Dawn's Sampler.
This patch implement the missing part.
BUG=dawn:47
Change-Id: Ief45cb9710493e9d79ddab60fe3be5a123b76ebd
Reviewed-on: https://dawn-review.googlesource.com/c/3540
Commit-Queue: Shaobo Yan <shaobo.yan@intel.com>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
This change also removes DepthStencilState object.
Bug=dawn:31
Change-Id: I7bb54ef4da527184bb2726c77d93d411d44c3956
Reviewed-on: https://dawn-review.googlesource.com/c/3541
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Yunchao He <yunchao.he@intel.com>
It has already been initialized to nullptr by C++ autogen code.
BUG=dawn:82
Change-Id: I2c1cad003a7a12227cb3d17a90e12c16739ee9a0
Reviewed-on: https://dawn-review.googlesource.com/c/3600
Commit-Queue: Yunchao He <yunchao.he@intel.com>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
The default value for maxDepthBound should be 1.0.
BUG=dawn:81
Change-Id: I337aac884456c739222bc31f8003267aa6de96af
Reviewed-on: https://dawn-review.googlesource.com/c/3580
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Yunchao He <yunchao.he@intel.com>
This patch implements using a layer of a texture as a color attachment
on OpenGL by using glFramebufferTextureLayer. As WebGPU won't support
rendering into a texture view whose format is different from the
original texture, it is correct to use glFramebufferTexture on the
OpenGL backends.
BUG=dawn:16
Change-Id: Iab6d905ee119bb9bb2d1bb212134cf757483c4d4
Reviewed-on: https://dawn-review.googlesource.com/c/3560
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
For the textures got from Metal swap chain, their "framebufferOnly" may
be true, which means they can only be used as attachments in a render
pass, and they are not allowed to be used in MTLRenderCommandEncoder,
MTLBlitCommandEncoder or MTLComputeCommandEncoder. So currently Dawn
examples all crash when METAL_DEVICE_WRAPPER_TYPE = 1 is set into
environmental variables.
This patch adds checks on the situations that we do not need to create
a Metal texture view:
1. We create Metal texture only when the usage of the texture includes
Sampled or Storage.
2. We won't create Metal texture view if the view uses the same format
as the original texture, the whole mipmap levels and array slices.
3. We use the original MTLTexture and set the slice and level in
MTLRenderPassDescriptor.
Furthermore, with this patch, "setFramebufferOnly" is set to true only
when the usage passed to configure is a subset of (OutputAttachment |
Present).
BUG=dawn:69
Change-Id: Ie2670f383c16eafa3b1c6f99126922e940721174
Reviewed-on: https://dawn-review.googlesource.com/c/3400
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This change also removes BlendState object.
Bug=dawn:32
Change-Id: I8bf4ff7531e7504efb17b6bae3ca01f1f2b4131e
Reviewed-on: https://dawn-review.googlesource.com/c/3042
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Yunchao He <yunchao.he@intel.com>
If there's an error during device initialization, it's too early to use
ConsumedError (SetErrorCallback can't possibly have been called).
In this case, manually handle the error from initialization.
This will help us diagnose issue chromium:917555, where device
initialization is failing but the error is not printed.
TBR: cwallez@chromium.org
Bug: chromium:917555
Change-Id: I63ba3983688f508550afe2815ca1dda36130fed1
Reviewed-on: https://dawn-review.googlesource.com/c/3520
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Kai Ninomiya <kainino@chromium.org>
To match the WebGPU idl, SetRenderPipeline and SetComputePipeline need to change
the name to SetPipeline.
This patch just rename these two APIs
BUG=dawn:52
Change-Id: I2545c94158ebd051027a018650bf760a25845d73
Reviewed-on: https://dawn-review.googlesource.com/c/3480
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Shaobo Yan <shaobo.yan@intel.com>
Some header files in utils missing #ifdef and #endif and this caused including
header files multiple times.
This patch fix it.
BUG=dawn:72
Change-Id: Ib28b1a1cef91e49a5754ec6b3d66327076070d99
Reviewed-on: https://dawn-review.googlesource.com/c/3461
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
RenderPipeline and ComputePipeline has been created with descriptors and PipelineBuilder
is not needed anymore.
This patch remove these remain "Builders" in dawn.
BUG=dawn:52
Change-Id: I8b119c540952beb3386913197f25b9c441f53ba4
Reviewed-on: https://dawn-review.googlesource.com/c/3460
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Tests are run in this order: 1, 2, 3
After suppressing test 2, test 3 started failing on the builder, this
seems to point out that test 1 is leaving the driver in a bad state.
We add suppressions both 1 and 3 just to be safe.
TBR=senorblanco@chromium.org
BUG=chromium:915430
Change-Id: Ie601b03f9e5038c623d8b7e009d2a9fb8086d181
Reviewed-on: https://dawn-review.googlesource.com/c/3420
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Stephen White <senorblanco@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This patch is the first one of the descriptorization of render pass. In
this patch we add support of RenderPassColorAttachmentDescriptor
and RenderPassDepthStencilAttachmentDescriptor to
RenderPassDescriptorBuilder.
This patch also adds StoreOp to render pass color and depth stencil
attachment descriptor.
RenderPassDescriptorBuilder will be completely removed in the next
patch.
BUG=dawn:6, dawn:49
TEST=dawn_end2end_tests, dawn_unittests
Change-Id: If623b41d04016425efa53932ae1648daf2263675
Reviewed-on: https://dawn-review.googlesource.com/c/3300
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
SPIRV-Cross outputs HLSL utilizing register spaces for seperate bind groups.
This changes the D3D12 backend to also use them.
Bug: dawn:66
Change-Id: I0590ae59fa3d369b57cdb32e4c9808c137fa88dc
Reviewed-on: https://dawn-review.googlesource.com/c/3360
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Brandon Jones <brandon1.jones@intel.com>
The OpenGL backend doesn't expose PCI device and vendor IDs yet which
means that IsAMD() is always false, making the test not skipped.
TBR=senorblanco@chromium.org
BUG=chromium:915430
Change-Id: Ic630080df442826b572cbd294978820109424229
Reviewed-on: https://dawn-review.googlesource.com/c/3381
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Otherwise the Device might fire callbacks when it is destroyed,
causing use-after-frees on the wire server.
BUG=chromium:914620
BUG=chromium:914615
Change-Id: Ic47b219b4ebe2eb5abd525741c0ff1180282c87d
Reviewed-on: https://dawn-review.googlesource.com/c/3322
Reviewed-by: Stephen White <senorblanco@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
PostHandleQueueSignal assumed that fence was not null because QueueSignal
generates an error if it is. The errors are not surfaced immediately so
this additional check is needed before doing the post-handler.
Bug: chromium:914808
Change-Id: I2a99f5229712d49d3c9a2d1f3f2dd1009247a24c
Reviewed-on: https://dawn-review.googlesource.com/c/3280
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This patch adds the support of the parameter 'baseVertex' of drawIndexed
on D3D12, Metal and Vulkan back-ends.
BUG=dawn:51
TEST=dawn_end2end_tests
Change-Id: Ibd25884ad2abceaaed744d74c4ee6b0ae6b3fa1b
Reviewed-on: https://dawn-review.googlesource.com/c/3221
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
This patch updates the definition of TextureDescriptor to make it match
WebGPU IDL:
1. Rename 'arrayLayer' to 'arraySize'
2. Add the missing member "sampleCount" and check that currently
sampleCount can only be 1.
BUG=dawn:56
TEST=dawn_unittests
Change-Id: I642186529f045865ae344cb5545ac80e14445c59
Reviewed-on: https://dawn-review.googlesource.com/c/3180
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This patch remove render pipeline builder and use descriptor to create render pipeline.
Sub-objects in descriptor will be removed in future.
Bug: dawn:4
Change-Id: I58dd569c7be42c2648311847b939c681189c2854
Reviewed-on: https://dawn-review.googlesource.com/c/2180
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Kai Ninomiya <kainino@chromium.org>
The fuzzer is able to trigger nullptr reads by failing to create objects
and then using the resulting nullptr in other operations. The proper fix
is to implement WebGPU error handling where creation failure returns a
valid but "error" object.
However implementing this error handling is a lot of work, so in the
meantime we use nullptr checks in relevant places to fix the fuzzer
issue. These checks will be removed once the error handling is changed.
BUG=dawn:8
Change-Id: I6777a7fa40383b3d2235e071c3f0109de7605a22
Reviewed-on: https://dawn-review.googlesource.com/c/2565
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This reverts commit 672d29d14c.
Reason for revert: https://bugs.chromium.org/p/chromium/issues/detail?id=913171
Original change's description:
> Create new src/tests BUILD.gn file.
>
> Move all test-related build stuff into its own BUILD.gn file. This
> required moving the dawn_generator template into a common file, so it
> can be called by both BUILD.gn and src/tests/BUILD.gn.
>
> [This is a reland of https://dawn-review.googlesource.com/c/dawn/+/2940
> with a fix for mock_dawn.]
>
> Bug: dawn:61
> Change-Id: Id1e6d0c2b07caa2610cebe206511e972ac18fe8d
> Reviewed-on: https://dawn-review.googlesource.com/c/3020
> Reviewed-by: Kai Ninomiya <kainino@chromium.org>
> Reviewed-by: Corentin Wallez <cwallez@chromium.org>
> Commit-Queue: Stephen White <senorblanco@chromium.org>
TBR=cwallez@chromium.org,kainino@chromium.org,senorblanco@chromium.org
Change-Id: I54cdc558b128935dc8a8d22ec2b5e879271c35ae
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: dawn:61
Reviewed-on: https://dawn-review.googlesource.com/c/3080
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Move all test-related build stuff into its own BUILD.gn file. This
required moving the dawn_generator template into a common file, so it
can be called by both BUILD.gn and src/tests/BUILD.gn.
[This is a reland of https://dawn-review.googlesource.com/c/dawn/+/2940
with a fix for mock_dawn.]
Bug: dawn:61
Change-Id: Id1e6d0c2b07caa2610cebe206511e972ac18fe8d
Reviewed-on: https://dawn-review.googlesource.com/c/3020
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Stephen White <senorblanco@chromium.org>
This reverts commit 0a7ddd43d7.
Reason for revert: Broke compile in https://ci.chromium.org/p/chromium/builders/luci.chromium.ci/linux-rel/12314
See also: https://chromium-review.googlesource.com/c/chromium/src/+/1364694
Original change's description:
> Create new src/tests BUILD.gn file.
>
> Move all test-related build stuff into its own BUILD.gn file. This
> required moving the dawn_generator template into a common file, so it
> can be called by both BUILD.gn and src/tests/BUILD.gn.
>
> Bug: dawn:61
>
> Change-Id: Icaa459270bdaa60306e053b93835812e70dba6f5
> Reviewed-on: https://dawn-review.googlesource.com/c/2940
> Reviewed-by: Kai Ninomiya <kainino@chromium.org>
> Reviewed-by: Stephen White <senorblanco@chromium.org>
TBR=cwallez@chromium.org,kainino@chromium.org,senorblanco@chromium.org
Change-Id: If6d8c759f63c12b244471016f10e92c07299303f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: dawn:61
Reviewed-on: https://dawn-review.googlesource.com/c/3000
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Kai Ninomiya <kainino@chromium.org>
Move all test-related build stuff into its own BUILD.gn file. This
required moving the dawn_generator template into a common file, so it
can be called by both BUILD.gn and src/tests/BUILD.gn.
Bug: dawn:61
Change-Id: Icaa459270bdaa60306e053b93835812e70dba6f5
Reviewed-on: https://dawn-review.googlesource.com/c/2940
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Stephen White <senorblanco@chromium.org>
This commit adds utils::MakeBindGroup to make code craeting bind groups
nicer to read. Additional tests are added that give 100% coverage of
ValidateBindGroupDescriptor.
BUG=dawn:3
Change-Id: I56e1da8c2952306ad233845b0ec3ec32aef793d9
Reviewed-on: https://dawn-review.googlesource.com/c/2802
Reviewed-by: Jiawei Shao <jiawei.shao@intel.com>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This patch implements using a layer of a texture as a color
attachment on D3D12, Metal and Vulkan.
This feature is not implemented on OpenGL back-ends in this patch.
BUG=dawn:16
TEST=dawn_unittests
Change-Id: Iffc194c6117f6e3e6506c6fcbfd51ca2fbe9ede8
Reviewed-on: https://dawn-review.googlesource.com/c/2660
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
This ensures that all fences are complete. Flaky failures on Windows
showed some fence statuses were NOT_READY despite having been checked
after calling vkQueueWaitIdle.
Bug: dawn:60
Change-Id: Id4fa18c8842daf75faa9df6fcba8afdca43623c9
Reviewed-on: https://dawn-review.googlesource.com/c/2920
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Austin Eng <enga@chromium.org>
This change implements timeline fences in Dawn.
It includes methods and descriptor members to eventually
support multi-queue, but does not implement them.
Bug: dawn:26
Change-Id: I81d5fee6acef402fe099227a034d9669a89ab6c3
Reviewed-on: https://dawn-review.googlesource.com/c/2460
Commit-Queue: Austin Eng <enga@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
This is both something we should strive for for robustness of the
backends and in this case helped debug what the issue was on the
linux-dawn-rel builder that was failing all Vulkan tests.
BUG=dawn:19
Change-Id: Ibe9f5ad76b7766575bb74fe4993625cf82cdf13f
Reviewed-on: https://dawn-review.googlesource.com/c/2702
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
This makes the name match WebGPU's IDL
BUG=dawn:3
Change-Id: I1338fa07580ba8c0f6700b7765fb7389018a4126
Reviewed-on: https://dawn-review.googlesource.com/c/2801
Reviewed-by: Austin Eng <enga@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This is needed to implement the timeline fence signal tracker in the frontend
Bug: dawn:26
Change-Id: Id6eb2afb81385de5093b57c5cb23ace93c8aab1b
Reviewed-on: https://dawn-review.googlesource.com/c/2741
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Austin Eng <enga@chromium.org>
Modify internal command buffer types to reflect the front end APIs for
copyTextureToBuffer and copyBufferToTexture.
Bug: dawn:17
Change-Id: I088a167ee7145d741e70ed28c1df7a12d24b72fc
Reviewed-on: https://dawn-review.googlesource.com/c/2740
Commit-Queue: Brandon1 Jones <brandon1.jones@intel.com>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
It currently is a tagged pair instead of a tagged union because it was
much easier to write and the optimization can come later.
BUG=dawn:19
Change-Id: Idbfd86d559655b38871c2d1768bdd758e797dfbd
Reviewed-on: https://dawn-review.googlesource.com/c/2701
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Stephen White <senorblanco@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Becuase CGDisplayIOServicePort is deprecated in OSX >= 10.9, we create
an alternative function which manually finding a service port with
matching vendor and product IDs.
BUG=dawn:10
TEST=dawn_end2end_tests
Change-Id: I94ff65911e159c2b7075209d8902c1551560ed47
Reviewed-on: https://dawn-review.googlesource.com/c/2541
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Cosmetic changes to copyBufferToTexture and copyTextureToBuffer to
match WebGPU IDL. Introduces BufferCopyView, TextureCopyView,
TextureAspect, and Origin3D types.
Bug: dawn:17
Change-Id: Ic0e7f472a9dc1353d3fc3839ff02f348bb6067e8
Reviewed-on: https://dawn-review.googlesource.com/c/2520
Commit-Queue: Brandon1 Jones <brandon1.jones@intel.com>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
This change moves most of SerialQueue into SerialStorage
and factors it to make SerialMap and SerialQueue. SerialMap
does not enforce that items are Enqueue'd in monotonically
increasing order. This is useful for implement timeline fences
because OnCompletion callbacks may be added in an arbitrary order.
Bug: dawn:26
Change-Id: I03376117311112b0b94ed887a31974f36c4a5464
Reviewed-on: https://dawn-review.googlesource.com/c/2720
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
In preparation for the descriptorization of BindGroup, support was added
to treat wire ID 0 as nullptr for a bunch of objects. Now that we have a
fuzzer for the wire+frontend, we need to validate when we have a 0 id.
Either the wire needs to reject the ID or the frontend needs to validate
against nullptrs. Since only few entrypoints will have a use for
nullptrs (bind groups, render pass resolve textures), we require an
opt-in in the JSON file for a structure member or an argument to be
optional.
This disables the tests related to ID 0 = nullptr, because we don't yet
have optional argument/members in dawn.json.
BUG=chromium:905273
BUG=chromium:906418
BUG=chromium:908678
Change-Id: If9a3c4857db43ca26a90abff2437e1cebb0ab79b
Reviewed-on: https://dawn-review.googlesource.com/c/2704
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Stephen White <senorblanco@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
New additions to the validation for the WebGPU execution environment
broke all the tests that use shaders because tests don't produce valid
SPIR-V for WebGPU and also backends don't know how to lower
WebGPU-flavored SPIR-V to target languages.
Also rolls SPIRV-Headers to a version compatible with SPIRV-Tools
TBR=kainino@chromium.org
BUG=dawn:57
Change-Id: Icd9a199efc39cf143e38d64841eb4b122c9f54a9
Reviewed-on: https://dawn-review.googlesource.com/c/2706
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Stephen White <senorblanco@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This patch adds checks when we set a texture view as color or depth
stencil attachments:
1. The mipmap level of the texture view must be 1 as it is limited in
D3D12, Metal and Vulkan.
2. The array layer count of the texture view must be 1 as currently we
do not plan to support layered rendering in WebGPU.
3. The format of the texture view must be color renderable when it is
used as a color attachment.
4. The format of the texture view must be a depth stencil format when it
is used as a depth stencil attachment.
BUG=dawn:16
TEST=dawn_unittests
Change-Id: Ibce3bda20d49a725c26796aa627c5067532761ad
Reviewed-on: https://dawn-review.googlesource.com/c/2661
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Currently this suppresses them for all GPUs on Metal because
we there are no facilities to get the GPU vendor ID yet.
TBR=kainino@chromium.org
BUG=dawn:39
Change-Id: I8377016466da765a18f20ade5b277fa9cf1305c5
Reviewed-on: https://dawn-review.googlesource.com/c/2600
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This patch adds checks that we can only create cube map and cube
map array texture views on textures with width == height as is
required in Vulkan.
This patch enables the imageCubeArray feature on Vulkan back-ends
to ensure we can create cube map array image views on all Vulkan
back-ends.
This patch also adds a missing VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT
flag when creating Vulkan images with arrayLayer >= 6. Without this
flag we cannot create cube map or cube map array views.
This patch fixes all the cube map end2end tests on Linux using
Vulkan back-ends.
BUG=dawn:16
TEST=dawn_end2end_tests
Change-Id: Id9386b9ee509d18a5ba8ae1ca085134486b242d7
Reviewed-on: https://dawn-review.googlesource.com/c/2522
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
SetImplementation takes a pointer and would be shimmed by browsers so we
skip the call in the fuzzer, otherwise we'd dereference arbitrary
pointers.
BUG=chromium:906391
Change-Id: I61d8d729d3fb242e8ddf7452a88a653e05a82cc2
Reviewed-on: https://dawn-review.googlesource.com/c/2562
Reviewed-by: Dan Sinclair <dsinclair@google.com>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
The dawn::Device(dawnDevice) constructor was adding a reference which
caused the device to leak. Fix this by using dawn::Device::Acquire
instead.
BUG=chromium:904734
Change-Id: Id641459f9285c9da51a0d2a1f88126197bfd79a5
Reviewed-on: https://dawn-review.googlesource.com/c/2561
Reviewed-by: Dan Sinclair <dsinclair@google.com>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Due the jump within the signal trap used in these fuzzers, local scope
allocations cannot occur while the signal trap is on, otherwise there
is a possibility of leaks. This CL rewrites how the code under test is
run, so that the potentially aborting code is tightly wrapped by
signal trap without any local scope allocations.
BUG=chromium:906416
Change-Id: Ie52647433dcac57e3ea065d5bdcb6e14c5929494
Reviewed-on: https://dawn-review.googlesource.com/c/2521
Commit-Queue: Ryan Harrison <rharrison@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
This patch implements cube map and cube map array texture views on
all back-ends and adds related end2end tests.
BUG=dawn:16
TEST=dawn_end2end_tests
Change-Id: I3ac3f493eb92ac551371041039bd5cf39df53050
Reviewed-on: https://dawn-review.googlesource.com/c/2220
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Otherwise UBSan complains that C++ types are different between the
shared libraries because libc++ is linked statically.
BUG=chromium:904736
Change-Id: I51ef40d1f7910fd693a4585c74ff404812472d2e
Reviewed-on: https://dawn-review.googlesource.com/c/2380
Reviewed-by: Dan Sinclair <dsinclair@google.com>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
These fuzzers currently depend on being able to change the signal
handler at runtime, but the default flags being used forbid this. This
CL overrides the upstream default to allow changing the handler.
BUG=chromium:904725,chromium:904712
Change-Id: I68423564981b7f2e39f7c00744b92da982cf19e9
Reviewed-on: https://dawn-review.googlesource.com/c/2361
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Max Moroz <mmoroz@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
This will avoid compilation to break, and adds standalone reproducers
for the fuzzer_tests.
BUG=chromium:903380
BUG=dawn:34
Change-Id: I9995a852076d9f6d1ebdee5b999989c2d74d4709
Reviewed-on: https://dawn-review.googlesource.com/c/2321
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Ryan Harrison <rharrison@chromium.org>
Reviewed-by: Dan Sinclair <dsinclair@google.com>
This CL adds in fuzzers for SPIRV-Cross for HLSL, GLSL, and MSL
outputs. These fuzzers live in Dawn because there is not appropriate
location in the Chromium source repo for them and it is unlikely they
would be land-able in the SPIRV-Cross repo, because it is not coupled
with Chromium's build system and thus Clusterfuzz so would be
effectively dead code. Dawn depends on this code, but it is also
integrated into the Chromium build system, so this was the best place
I could find for them
The code under fuzz unfortunately uses exceptions/aborting as its
error reporting mechanism. This is an acknowledge short coming and
there are efforts to remove this behaviour. To work around this and
reduce the number of false positives found by the fuzzers, a signal
trap has been implemented which will be removed once the code under
fuzz has been updated.
The trap replaces the existing signal handler and silencing signals
while running the code under test. This allows the code under test to
call abort() and not crash the fuzzing process. Theoretically, only
SIGABRT should need to be trapped, but something is causing the signal
from abort() to be converted to SIGSEGV when running under ASAN.
This signal trap has been tested with the fuzzing/sanitizers by
intentionally inserting bad calls that will occur after a few thousand
test cases. It was confirmed that the fuzzer detected the issue and
stops fuzzing.
The alternate to implementing this signal trap would be to turn on
exceptions for the fuzzer. This was attempted, but proved to be
fruitless due to what was reported as an ODR issue, but couldn't
couldn't be silenced. The likely underlying issue was a pre-built
library or other object being built without exceptions was causing
different versions of symbols or the exception version of the standard
library not being instrumented by ASAN. Given the majority of Chromium
eco-system turns off exceptions, fixing this issue would not be
helpful to the larger community and was looking like it would require
significant effort.
BUG=chromium:903380
Change-Id: I63a5595383f99b7a0e150d72bb04c89b8d722631
Reviewed-on: https://dawn-review.googlesource.com/c/2260
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Max Moroz <mmoroz@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
BindGroupTests.ReusedUBO and BindGroupTests.UBOSamplerAndTexture fail on
Metal so we have to skip them temporarily.
BUG=dawn:33
Change-Id: I2875dab6d856eb207ee5b785ddf160df2cb9fd5b
Reviewed-on: https://dawn-review.googlesource.com/c/2240
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Likewise "presented" textures won't be available for use in submits so
this sets up state-tracking and validation for textures too.
Command buffer resource usage is now stored in the frontend instead of
done per-backend because it is used to validate resources are allowed in
the submits.
Also adds a test.
BUG=dawn:9
Change-Id: I0537c5113bb33a089509b4f2af4ddf4eff8051ea
Reviewed-on: https://dawn-review.googlesource.com/c/2142
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This patch adds the entry points for creating cube map and cube map
array texture views. This patch also adds validations that the array
layer in the texture view descriptor must be 6 when the texture view
dimension is cube map, and a multiple of 6 when the texture view
dimension is cube map array.
BUG=dawn:16
TEST=dawn_unittests
Change-Id: I86a66c3753a7678351f65b43f6cd54b96d1b762c
Reviewed-on: https://dawn-review.googlesource.com/c/2200
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
MSC doesn't like the use of sizeof(member) inside the same struct.
So hardcode the padding, and assert that the offset is 256.
Change-Id: I78bbca6871cf8227c90d00a03ccf8e3d955b7d21
Reviewed-on: https://dawn-review.googlesource.com/c/2160
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Stephen White <senorblanco@chromium.org>
When both the vert and frag shaders have a UBO binding, the D3D12
backend was using register offset 0 for both, causing a collision,
and the wrong constant value used in one of the shaders.
The fix is to use the binding offsets computed by the BindGroupLayout,
since they know about all of the bindings, not just the ones computed
for each shader. This made it necessary to defer shader compilation
until pipeline layout creation time (as is done in the Metal backend
for similar reasons).
Finally, those bindings offsets computed by the BGL include an offset
for the CBV, UAV and SRV subgroups, so we must add the same register
offset when assigning the BaseShaderRegister to the descriptor ranges
in the PipelineLayout constructor so that they match.
Bug: dawn:20
Change-Id: I18287bf1c06f06dd61288e12da64752f54634466
Reviewed-on: https://dawn-review.googlesource.com/c/1960
Reviewed-by: Stephen White <senorblanco@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Stephen White <senorblanco@chromium.org>
This also removes support for Travis and AppVeyor, as well as git
submodules for dependencies.
It also adjusts .gitignore to include dependencies (submodules are
implicitly ignored but are removed in this commit).
Finally, removes some CMake-specific code from the code generator.
BUG=
Change-Id: I4ebc04e530a574b412ef0ca81e4672db01f0ed92
Reviewed-on: https://dawn-review.googlesource.com/c/2040
Reviewed-by: Stephen White <senorblanco@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This patch renames the field "mipLevel" of TextureDescriptor to
"levelCount" to align with the WebGPU idl.
BUG=dawn:16
Change-Id: I36b30d78831786e4c21ffd641f820375e95a1be5
Reviewed-on: https://dawn-review.googlesource.com/c/2100
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
This patch implements creating texture view with texture view descriptor
with glTextureView, which is supported on OpenGL version >= 4.3. As is
required by glTextureView, we allocate storage for a texture by
glTexStorage*D instead of glTexImage*D.
BUG=dawn:16
TEST=dawn_end2end_tests
Change-Id: I29bcf6d538a70b4d6d1e5a21276b9e8d6e93ca51
Reviewed-on: https://dawn-review.googlesource.com/c/1980
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
d3d12::Buffer::UnmapImpl() was passing an empty range to
ID3D12Resource::Unmap(). This causes it to be a no-op when writing a
buffer. The fix is to store the entire mapped range in the Buffer,
and use it during Unmap().
Note: this doesn't seem to actually cause an issue on the D3D12 drivers I
have, so I have been unable to write a test for it. However, it does cause
an issue in RenderDoc: the buffer data appears unmodifed after the
Map/memcpy/Unmap calls. The hypothesis is that RenderDoc notices the empty
range at the API level, and leaves its shadow buffer contents unmodified.
Because I feel this change is correct regardless, I'm landing it without
a test.
Bug: dawn:25
Change-Id: Ie5dd5fcfedbe1d80c75a3d8094c97af27653ee00
Reviewed-on: https://dawn-review.googlesource.com/c/1920
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Stephen White <senorblanco@chromium.org>
This patch is the first part to implement creating a texture view
with a texture view descriptor on D3D12 and Metal back-ends. With
this patch the texture views created with descriptor can be bound
as sampledTextures on D3D12 and Metal back-ends.
Note that the support of rendering into a layer or a mipmap level of
a texture on D3D12 and Metal back-ends is not included in this patch.
BUG=dawn:16
TEST=dawn_end2end_tests
Change-Id: I62473ec5a4bb6b84d797ef7fd9cb98689ff763f4
Reviewed-on: https://dawn-review.googlesource.com/c/1940
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
This removes the need for Clone() so it is removed and also adds tests
for the new constructors.
BUG=dawn:11
Change-Id: Ia45c765c2d30e40b0e036427793a62327b2008fc
Reviewed-on: https://dawn-review.googlesource.com/c/1901
Reviewed-by: Stephen White <senorblanco@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This patch implements creating a texture view with given texture
view descriptor on Vulkan back-ends.
This patch also updates TextureViewTests to test various mipmap
levels and adds several tests to cover all added features.
BUG=dawn:16
TEST=dawn_end2end_tests
Change-Id: I602e5a076e4f717f555cb9a9ef98d5dfceadbe81
Reviewed-on: https://dawn-review.googlesource.com/c/1880
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
This patch removes CreateDefaultTextureView in all the back-ends of
class Device and implements this function by CreateTextureView using
a TextureViewDescriptor created from the original texture.
Note that this patch only refactors the original implementation of
creating default texture. The support of creating texture views from
a texture view descriptor will be added in the next several patches.
BUG=dawn:16
Change-Id: Iadfc1e17e1cf23a4c1fa8ff44b1fb1a765d21e3f
Reviewed-on: https://dawn-review.googlesource.com/c/1840
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
ObjectBase will contain data that all WebGPU objects have such as a
pointer back to the device, a refcount (via inheriting from RefCounted),
a name, an error status etc.
BUG=dawn:24
Change-Id: I919e1a6d4a68811ceb6e503b2a793815c92f2528
Reviewed-on: https://dawn-review.googlesource.com/c/1620
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
This patch adds the entry point creating texture view with a
TextureViewDescriptor and all the validations on the parameters
according to https://github.com/gpuweb/gpuweb/issues/79.
BUG=dawn:16
TEST=dawn_unittests
Change-Id: Ibc04a0f7b9f334c57da191606313ab156e18af1f
Reviewed-on: https://dawn-review.googlesource.com/c/1800
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
If a bindgroup was re-used in multiple command buffers in a single call
to queue.Submit(), it was skipping the creation of the corresponding
descriptor heap for that bind group in the second command buffer.
The fix is to use the command buffer's index into the submit command as
part of the key for the bind group's descriptor heap.
Change-Id: Ie66a0e772b10cc72bf040f090dac4c4a10f24266
Reviewed-on: https://dawn-review.googlesource.com/c/1740
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Commit-Queue: Stephen White <senorblanco@chromium.org>
This splits off part of CommandBufferBuilder in separate
RenderPassEncoder and ComputePassEncoder objects. To match the WebGPU
IDL and factor some code, both these encoders inherit from
ProgrammablePassEncoder.
These encoders are pure frontend objects and record into the
CommandBufferBuilder command allocator objects, so no changes to the
backends were needed.
Error handling is still ew, because the "builder" mechanism we had
doesn't allow for "split builders". Nicer error handling will have to
wait on Dawn matching WebGPU.
All the tests and samples were updated to the new structure.
BUG=dawn:5
Change-Id: I5f5d4ad866e2c07fedd1ba7a122258c6610941f1
Reviewed-on: https://dawn-review.googlesource.com/1543
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
This patch is the first one to support inspecting GPU information for
dawn_end2end_tests.
In this patch, we support collecting the device name, device id and
vendor id on D3D12 and Vulkan. We also support collecting the device
name on OpenGL. The collection on Metal will be supported in the next
patch. Using this information we implement a series of APIs to inspect
the information of both OS and GPU vendor.
We also skip two failed tests on Windows Intel Vulkan backends.
BUG=dawn:10
Change-Id: If52a960c0bae3922a0b5650500218eff1400d77a
Reviewed-on: https://dawn-review.googlesource.com/1460
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
This matches WebGPU and is a good test of having structures include
other structures by value.
BUG=dawn:13
Change-Id: Ibd5ea1340338e5aa16069499c498ac5a455fc2cd
Reviewed-on: https://dawn-review.googlesource.com/1500
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Corentin Wallez <cwallez@chromium.org>
This patch is the first one to descriptorze texture view. In this
patch, we completely remove TextureViewBuilder and add the entry
point CreateDefaultTextureView for creating a texture view on a
non-array 2D texture using the same type and format.
Texture view descriptors and 2D array texture views will be supported
in the next patch.
BUG=dawn:1, dawn:16
Change-Id: Ibd2a0bcf02cbb567a98d2faaaaa897eff2c062e5
Reviewed-on: https://dawn-review.googlesource.com/1440
Reviewed-by: Corentin Wallez <cwallez@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
Commit-Queue: Jiawei Shao <jiawei.shao@intel.com>
BUG=dawn:13
Change-Id: I7a224503d0a33ef148e63b8327a6a53df1b3868a
Reviewed-on: https://dawn-review.googlesource.com/1520
Commit-Queue: Kai Ninomiya <kainino@chromium.org>
Reviewed-by: Stephen White <senorblanco@chromium.org>
Reviewed-by: Kai Ninomiya <kainino@chromium.org>
The error type will help distinguish between validation errors, context
losts and others which should be handled differently.
Take advantage of advantage of this to change DAWN_RETURN_ERROR to
"return DAWN_FOO_ERROR" to have the return be more explicit. Also
removes usage of DAWN_TRY_ASSERT for more explicit checks.
Change-Id: Icbce16b0c8d8eb084b0af2fc132acee776909a36
This integrates spirv-val in dawn_native so that regular and
WebGPU-specific validation of shaders is done.
Also adds tests to check OpUndef is correctly rejected so we know
WebGPU-specific validation is working.
Change-Id: If49d276c98bca8cd3c6c1a420903fe34923a2942
This patch implements the creation of 2D array textures and copying
between a buffer and a layer of a 2D array texture on D3D12, Metal
and OpenGL back-ends.
TEST=dawn_end2end_tests
Linking against their .lib makes loading Dawn fail on systems that don't
have the DLLs. This happens for example on Windows7 that doesn't have
d3d12.dll. Instead we dynamically load functions pointers from these
DLLs at d3d12::Device startup.
Change-Id: I4d01a12d0f91bec45bf125450d2c08aaa9ff9fac
This patch implements a micro DAWN_SKIP_TEST_IF in DawnTest.h which
can be used to skip running a test in dawn_end2end_tests when the
given condition is satisfied.
Implement copying between a buffer and a texture 2D array on Vulkan
This patch implements the creation of a 2D array texture and data
copying between a buffer and a layer of a 2D array texture on
Vulkan back-ends.
TEST=dawn_end2end_tests
This patch introduces texture descriptor for texture creation instead
of texture builders.
This patch also adds "arrayLayer" to texture descriptor and removes
mDevice in TextureD3D12.
WIN32 is defined by the SDK, but _WIN32 is defined by the compiler.
Since Dawn doesn't necessarily include <windows.h> everywhere dawn.h is
included, we should use _WIN32 (which will always be defined).
In the DEPS file we are going to use Chromium's mirror of
github.com/KhronosGroup/SPIRV-Cross so we need to adjust .gitmodules to
point to it instead of Kangz/SPIRV-Cross. Also take that opportunity to
roll SPIRV-Cross.
Change-Id: I4f53a4fc54f5b1b9a754ac55e976c81e5eeabeb2
On 32bit platforms, even if it contains a uint64_t the handle wrapper
will align to 4 bytes because the assembly load operations can't take
advantage of 64bit aligned loads.
Fix this by forcing the alignment to the alignment of what would be the
native Vulkan handle type.
Also use macros with defined()
Change-Id: I0de9b4a77e648c416b04311b854c956762248868
We still keep a dummy BufferBuilder object around so that it can be used
for the builder error callback tests of the wire.
Change-Id: If0c502bb8b62ee3ed61815e34e9b6ee6c03a65ef
Resources used to have both a current and an allowed usage but the
concept of current usage has been removed so we can rename "allowed
usage" to "usage" to make the name match WebGPU's
WebGPUBufferDescriptor::usage and WebGPUTextureDescriptor::usage
Change-Id: I5190950bf7f7f5b86c92247ef0240fead9886268
BindGroup usage isn't something that's part of WebGPU's sketch.idl and
it might never exist. Remove it to simplify the migration of bindgroup
to descriptor.
Change-Id: I21e0a98eb60434d4009e748cd9afcbf89edd7e6a
This includes a bunch of fixes for clang warnings in Windows specific
code that was only compiled by MSVC previously. This also tidies up some
BUILD.gn issues on Windows.
This required adding some missing dependencies, splitting public headers
of libdawn_[native|wire] so they aren't hidden in the
libdawn_[native|wire]_sources targets, and making unittests depend on
sources directly instead of static libraries (which is almost equivalent).
As a byproduct, Empty.cpp is no longer needed and is removed.
This required putting Queue::Submit on QueueBase which is something we
would want to do anyway, and removes the need for Queue::ValidateSubmit
being called in the ProcTable.
This removes the need for all the "GeneratedCodeIncludes" files and
leads to a bunch of simplifications in BindGroup as well as the
dawn_native CMakeLists.txt.
Finally this was done in order to simplify the writing of BUILD.gn
files.
Also moves the TerribleCommandBuffer to utils:: because it isn't part of
the implementation of the wire, renames dawn::wire to dawn_wire, moves
src/wire to src/dawn_wire and puts the interface of dawn_wire in
src/include/dawn_wire.
The interface exposed by libdawn_native is declared in the new headers
living in src/include/dawn_native so that they both the users and the
libraries use the DAWN_NATIVE_EXPORT macros.
The dawn.h and dawncpp.h structure definitions references dawnFoo or
dawn::Foo respectively when it should reference dawn_native::FooBase* in
dawn_native. Autogenerate files to declare the dawn_native version of
the structs and change the ProcTable generation to use it instead.
This is important to make libdawn_native a shared library because
currently it was depending on dawncpp's definition of .Get().
This extends our Vulkan handle wrapper to have conversions from uint64_t
as well as the native Vulkan types:
- The dawn_wsi interface uses the uint64_t version.
- The backend interface uses the native Vulkan version
libdawn will be one of the libraries produced but other libraries like
libdawn_native don't need to link against it. However they do need the
Dawn headers so we generate them separately.
This also makes all internal targets depend on the header generation and
have the include directories necessary for those headers.
Also has a small fix for setting compile flags only for C++ files.
This adds DeviceBase::ConsumedError which is a helper method intended to
be the main place where Error.h errors are consumed.
To test this mechanism, object creation using descriptors is changed to
use ConsumedError, which finally gets their validation errors go
somewhere. This mechanism isn't final though because we have yet to
implement WebGPU error handling.
windows.h adds macros such as `#define GetMessage GetMessageA` which
cause conflicts in naming when for example a class definition is before
windows.h and a use is after windows.h
Add a header that can be used both to include windows.h and remove
defines, and to only remove defines (when windows.h is included by)
external dependencies.
This removes the following for both Buffer and Texture:
- The builder's SetInitialUsage
- The object's FreezeUsage and TransitionUsage methods
- The CommandBuffer Transition<Object>Usage methods
All samples and tests are simplified as a result. This also obsoletes
the UsageValidationTest which is removed.
Some validation was dependent on "current usage" and hasn't been
reintroduced for implicit transitions yet:
- Buffers can be used while mapped
- Swapchain textures can be used after they have been presented.
Validation for these will involve collecting all the resources used by a
command buffer and will be done in a follow-up patch.
With this the backend ignores explicit usage transition hints from the
frontent and generates all the barriers automatically based on resource
usage.
The current implementation is very naive and encodes a barrier
immediately just before a resource is used in a new state.
With this commit the Vulkan backend completely ignores the explicit
barrier commands passed from the frontend, and generates its own
pipeline barriers.
Right now it encodes each barrier just before the resources are used,
which is quite bad but will be optimized later.
This commit also makes the frontend command buffer validation perform
the checks necessary for implicit barriers (although they are redundant
with checks for explicit barriers) because the tracking can pre-compute
pass usage information that's useful for the Vulkan backend.
Tests for usage validation inside passes will be added once the concept
of transition is removed from the API.
These should hopefully subsume the ComputeBoids demo for testing purposes. Not all of these tests pass currently:
* ComputeCopyStorageBufferTests.StructTest/D3D12 fails due to "Reading structs from ByteAddressBuffer not yet supported."
* The disabled tests fail for various reasons on various backends.
Previously, the renumbering loop would sometimes iterate in the wrong order. To fix this, instead use the binding info already correctly extracted by `ExtractSpirvInfo`.
Fixes ComputeCopyStorageBufferTests.BasicTest/D3D12.
* Use a descriptor for BindGroupLayout
* Fix MatchesLambda
* Add WireTests.StructureOfStructureArrayArgument
* Add BindGroupValidationTests.BindGroupLayoutCache
This introduces a small amount of code duplication in the code that
handles push constants. On the plus side it removes the need for all the
asserts around which Metal encoder is active.
This changes the validation to have one iteration loop for the main
buffer that calls to pass-specific iteration loops for compute passes
and render passes. This is done to simplify code a bit and will help
implement implicit transitions that are "precomputed" per pass in the
command buffer validation and re-used in the backends.
A number of code simplifications were made to CommandBufferStateTracker
since it doesn't need to know if we are in a pass anymore. Further
simplifications will happen when implicit barriers are implemented.
Instead of initializing all of the bind group layouts in the pipeline
layout to default values, let them be nullptr and allow this elsewhere.
Follow-up on some changes in #206
We are changing all object creation to use descriptors but there is no
creation argument to pass for queue, so instead Device::CreateQueue
takes no argument.
The flow of commands is a bit more involved than for MapReadAsync and
goes like this:
- C->S MapAsync isWrite = true
- S: Call MapWriteAsync
- S: MapWriteAsync callback fired
- S->C: MapWriteAsyncCallback (no data compared to the read case)
- C: Call the MapWriteAsync callback with a zeroed out buffer
- C: Application calls unmap.
- C->S: UpdateMappedData with the content of the mapped pointer
- S: Copy the data in the mapped pointer
- C->S: Regular unmap command
- S: Call unmap
Makes nxt_end2end_tests -w pass all tests.
Also duplicates the MapRead wire tests for the write cases
This will help with follow-up changes that add support for a more
complete grammer of types, including structures containing pointers
to objects or other structures.
Instead of having the wire::Client and wire::Server directly act on
buffer memory, a couple interfaces are introduced so that WireCmd can do
things like get the object<->id mapping and temporary allocations.
While the serialization and deserialization of most commands was moved
into WireCmd, the commands that don't directly correspond to NXT methods
have their logic moved inside Client and Server and will be made to
expose the new interface in a follow-up commit.
This will be useful to provide additional coverage of the wire in
addition to the very focused WireTests unittests. All tests pass except
the MapWriteAsync ones that aren't implemented in the wire yet. They can
be skipped with --gtest_filter=-*MapWrite*
These types are meant to be used for computations that might but are not
expected to fail in backend/, such that the error case can be much
slower than the success case.
The NXT_TRY and NXT_TRY_RESULT macros are added to help write more
concise code that uses Error and ResultOrError.
The sampler builder will be removed as the first builder being converted
to a descriptor. Use CommandBufferBuilder instead as it is not expected
to change soon.
This as an API change to get closer to the direction in which WebGPU is
headed. The API change in next.json caused a ton of files to be changed
in the same commit to keep things compiling.
API: the Framebuffer and RenderPass objects are now merged in a single
RenderPassInfo that contains the attachments, loadOps and clear values
for a BeginRenderPass command. The concept of subpass is removed.
The RenderPass creation argument to RenderPipelines is replaced by
explicitly setting the format of attachments for RenderPipeline.
Validation: SetPipeline checks are changed to check that the attachments
info set on a RenderPipeline matches the attachments of the render pass.
Backends: Most changes are simplifications of the backends that no
longer require and indirection to query the current subpass out of the
render pass in BeginSubpass, and don't need to get the attachment info
from a RenderPass when creating RenderPipelines. In the Vulkan backend,
a VkRenderPass cache is added to reuse VkRenderPasses between
RenderPassInfos and RenderPipelines.
Tests and examples: they are updated with the simplified API. Tests
specific to the Framebuffer and RenderPass objects were removed and
validation tests for RenderPassInfo were added.
Tested by running CppHelloTriangle on all backends, end2end tests on all
platforms and all examples on the GL backend.
HashCombine will be used in more than just BindGroupLayout caching so we
extract it to a separate header. Add a better mixing constant for 64bit
systems.
Delete the TextureBuilder created in SwapChainBase::GetNextTexture().
Delete the InputStateBuilder and DepthStencilStateBuilder created in
RenderPipelineBuilder::GetResultImpl().
PipelineLayout was re-entering in NXT to create the default empty BGLs,
but forgot to remove the initial external refcount for them.
Fixing this showed an issue where it was impossible to externally
reference a RefCounted that had only internal references, fix this as
well and add a test.
When a BGL was first created in the cache, it started with an external
refcount of 1 and we then referenced again in
BindGroupLayoutBuilder::GetResultImpl, causing a leak.
Fix this by referencing in the cache lookup only if the BGL already
exists.
Don't assert on color formats which can be cleared with a
floating-point clear value.
So far, these are { unorm } x { r, rg, rgba, bgra }.
Fix linter error when no files to check.
The indexOffset of the draw was not being used. It must be
included in the indexBufferOffset.
Renamed indexBufferOffset -> indexBufferBaseOffset.
Add a DrawElements test which exercises zero and non-zero index offsets.
Backend support implemented in GL, Metal and D3D12.
Support for unorm values in the GL backend requires a
utility function to indicate if the format's components
are normalized.
Note that unorm_r8 is only supported on more recent MacOS SDKs (10.13),
so it's omitted for now.
When calling unmap on a mapped buffer for which the callback hasn't
fired yet, the callback should be called with UNKNOWN. The code marked
the callback as called only after calling it, causing problems with
re-entrancy where the callback would be called twice.
This could also get triggered by destroying the buffer inside the
callback.
Fix this in backend::Buffer and the WireClient and add test for both.
Previously we would remove the reference to pipelines in the destructor
of the d3d12::*Pipeline objects which could cause the D3D12 pipeline
state to be destroyed while still used by in-flight commands. Add a
global queue of ComPtrs to keep alive in the d3d12::Device to fix this.
We want all of NXT to have the origin in the top left. OpenGL's origin
is the bottom left instead. We are doing a blit already to decouple
the NXT render targets from the OpenGL default framebuffer. Take
advantage of this and invert the blit to make the OpenGL's backend
origin be top left.
PRESENT is an exclusive flag in NXT and can't be combined with other flags. The existing implementation treats the D3D12_RESOURCE_STATE_PRESENT as flag which is confusing due to being 0.
The Swapchain::Configure was changed to not require an initial usage
anymore. Previously the code was doing a transition to this usage
causing the code to now transition to <uninitialized data> usage.
Fix this by deleting code. Also make TextureD3D12 responsible for the
transition to PRESENT.
Making all textures represented by pointers is a problem for Vulkan
where VkImage is a 64bit type and wouldn't fit in a pointer on 32bit
builds. Make texture contain on of each useful type so that each backend
can choose which one it wants to receive.
This file changes the non-dispatchable Vulkan handle types. We want to
use some of these handles in utils/VulkanSwapChain.cpp so it needs to
have access to it. The file could include
backend/vulkan/vulkan_platform.h but it seems a bit cleaner to move the
header in common/ instead with a warning if the Vulkan backend isn't
enabled.
For the Vulkan backend it will make sense to have the SwapChain be
implemented inside the backend as it will need to interact with a lot of
things there. It will need SwapChainImpl and cannot see utils/ so
SwapChainImpl has to be moved in common/
Also makes SwapChainImpl a function called CreateSwapChainImplementation
as the inheritance was only used to share a static method.
In Vulkan images are created in no particular layout and must be
transitioned before they can be used. This didn't appear before because
the test were creating the textures with not initial usage and then
transitioned them. This isn't the case with InputStateTest, which is
what uncovered this issue.
There was a lot of missing around with viewports and flip the Y
coordinate in vertex shaders before. Turns out things are simpler than
we thought: *all* APIs have gl_Position(-1, -1) map to texel (0, 0). It
is just the present coordinate system that changes.
Remove some of the hacks we had to work around non-existent viewport
issues and fix tests.
Sometimes NXT provides default objects for parts of the pipelines, for
example a default pipeline layout. This objects were create with code
like: device->CreateFooBuilder()->GetResult(); and stored in a Ref<>.
This caused the object to have on external reference and two internal
references and not get destroyed when the Ref<> goes out. Call Release
on these objects to remove the external reference and fix the leak.
Was found via the Vulkan validation layers that were complaining that a
VkPipelineLayout was leaked.
This as this is the first command handled by the Vulkan backend, this
commit also introduces the b:✌️:CommandBUffer class and implements
b:✌️:Queue::Submit.
Also enables the BufferSetSubData tests that are now passing on Vulkan
even though the buffer transitions are unimplemented.
This introduce a new FencedDeleter service as part of the Device
objects that tracks when resources are no longer used and deletes them.
BufferVk takes advantage of this to defer the deletion of its handle
that was previously incorrectly delete directly in ~BufferVk.
On 32 bit Vulkan typedefs these handles to uint64_t which breaks
function overload resolution. Replace the
VK_DEFINE_NON_DISPATCHABLE_HANDLE and VK_NULL_HANDLE defines to be
opaque C++ types with the same capabilities.
Previously we would modify the GL state as soon as we saw
SetIndex/VertexBuffers. This GL state is owned by the VAOs in the
InputState and was disappearing on a Pipeline change. Fix this by
applying the index / vertex buffers lazily.
This was because the clip space of OpenGL has an inverted Y compared to
other APIs. This commit:
- Updates SPIRV-Cross to the latest version
- Uses the new vertex.flip_vert_y option in ShaderModuleGL
- Enables tests that are now passing in GL.
Explicitly configure swap chain usage in bindings and examples
Fix missing case in switch
Make swap chain Present usage implicit
Author: Austin Eng <enga@google.com>
This is to avoid a potential future problem if SetPipelineCommon were to
ever return false (which is currently not possible), some state might
have been modified incorrectly.
Previously didn't tell SPIRV-Cross at which MSL resource indices the
different SPIRV binding should be, and were lucky that it's giving
indices in increasing order matched the PipelineLayout in all our
samples.
Fix this by making SPIRV->MSL compilation depend on the PipelineLayout
so we can tell SPIRV-Cross which binding goes where.
We should do the same for vertex attributes eventually as they are
hardcoded to start at kMaxBindingsPerGroup currently.
Also a couple unrelated cleanups (unused function, usage of
IterateBitSet).
* clang/gcc: enable -pedantic warnings
* suppress a GCC-specific warning in stb_image
* And some clang-specific warnings
* -Wconversion (clang) -Wold-style-cast (clang+gcc)
and fix a few warnings that show up with these (and a few more with
-Wconversion on gcc, even though that's not enabled by default)
* bunch more warnings
* fixes
* remove merge error
Adds the swap chain interfaces to the API without changing the behavior
of anything else. This includes the C APIs for applications to provide
swap chain implementations. Also adds stub implementations on every
backend.
The test doing many small SetSubData freezes the Metal driver on a
MTLBuffer allocation. This is because we don't use a ringbuffer for
SetSubData and instead create one small upload buffer per call.
The same test is skipped on D3D12 as it is bound to have the same issue.
Also adds comments that were forgotten before every MapReadAsync test.
RenderDoc uses presents as the points to start and end a capture, so to
debug test we have to do the following:
TEST_F(...)
while(true) {
// All the test code
SwapBuffers();
}
}
Implements BeginRenderSubpass on the D3D12 backend. Descriptors for render target and depth stencil views are recorded in a descriptor heap for each framebuffer. For now, we still have the hack where no attachment renders to the backbuffer, so the CommandBuffer records those when necessary when it is submitted.
This PR also enables input states for D3D12 which are mostly working. One failure seems to be happening because our texture copies are not yet correct.
Probably not the most efficient implementation, but works.
Issues:
* Doesn't seem to render until the second frame. No clue why, yet.
* Hardcoded 640x480 in more places.
* Creates new FBOs for every subpass every frame. Should be done at Framebuffer build or CommandBuffer build time.
This helps Visual Studio users have less clutter in their solution
explorer. This also updates spirv-tools to a newer version that folders
itself. This also updates spirv-headers so that spirv-tools compiles.
This macro has some advantages over the standard library one:
- It prints the place where the macro was triggered
- It "references" the condition even in Release to avoid warnings
- In release, if possible, it gives compiler hints
It is basically is stripped down version of the ASSERT macros I wrote
for the Daemon engine in src/common/Assert.h
This commit also removes the stray "backend" namespaces for common/
code.
This directory used to contain both the state tracking code for the
backends, and the common utilities that could be used both by the
backends and the rest of the code. Things are now:
- src/common is utility code for the whole repo
- src/backend contains libNXT's code
- src/utils is utility code that we don't want in libNXT
This commit also changes all includes to use global paths from src/
bacause it had to touch a bunch of #include statements anyway.
Buffers with MapRead allowed are created on the READBACK heap and always
add the D3D12_RESOURCE_STATE_COPY_DEST state (required by D3D12).
Likewise MapWrite adds the D3D12_RESOURCE_STATE_GENERIC_READ state and
places resources on the UPLOAD heap. Because these states are
required, transitions for mapped buffers do nothing.
This makes rendering of the samples have the wrong colors on the Metal
backend, but using BGRA made end2end tests fail. The rendering color
will be fixed when the WSI is introduced.
Extract descriptor offset computation and CPU descriptor recording to
BindGroupLayout and BindGroup. Refactor descriptor heap allocation to
copy from a large CPU heap to a GPU heap.
Previously the Metal backend used a manual mutex system to make sure the
BufferSetSubData didn't have data races with reads from the GPU. Replace
this with a non-hacky version
- Make the Buffer objects allocated on the GPU
- Make SetSubData use a ResourceUploader that allocates a CPU buffer
and schedules a CPU->GPU copy.
- Have a list of pending commands and a finished command serial to
order operations and track when resource become unused.
No functional changes intended, but there are a couple additional
cleanups:
- Use anonymous namespaces instead of static functions
- Don't store an extra Device pointer in objects
Unfortunately you can't template on const-ness in C++ so we have to
duplicate all the iterator code for SerialQueue (that, or introduce very
heavy templating).
This also expands the Buffer validation tests to cover more creation
code paths and SetSubData. It also introduces a mechanism for
ValidationTests to check for device errors.
We want to test BufferMapRead validation using the null backend. To get
closer to conditions on a real backend, we call the callback only on the
next Queue::Submit. This is because on real backends, we would have to
wait for the GPU to be finished with the buffer, to be sure the correct
data is read.
- defaults to depth and stencil tests off
- whether or not depth and stencil tests are enabled is inferred from the comparison functions and stencil operations
- only one stencil reference. D3D12 does not support separate references
- change SetDepthWriteMode to SetDepthWriteEnabled and use a bool instead of enum
- Create PersistentPipelineState class for OpenGL backend with simple state tracking
- Add validation so DepthStencilState properties are only set once
- Update API usage in HelloDepthStencil
- refactor tracking of the DepthStencilState in the Metal backend
- validate that compute pipeline does not have a depth stencil state
Add depth and stencil tests. This is currently only implemented for the
OpenGL API. HelloDepthStencil is a test using the depth and stencil
buffers to do reflections. Currently clearing / stencil clearing is not
working properly.
Previously WireCmd.h/cpp that is used in wire_autogen wasn't included in
the sources, causing a link error on some platforms.
With WireCmd.* moved in the EXTRA_SOURCES, the nxt_wire target didn't
contain any non-header file and caused a link error on OSX. Fix it by
properly splitting the declaration and implementation of
TerribleCommandBuffer in a .h and .cpp file.
This makes sure it works correctly with the ScanForward Math type.
However this isn't a very good fix, the right solution would be to
detect whether we are compiling in 32bit or 64bit and use one of
ScanForward32 or ScanForward64.
For shared library to work on Windows to work, we need to add
declspec(export) and declspec(import) annotations to the symbols to
export. This fixes the problem by making all libraries static on
Windows, but we'll need to revisit and do proper symbol exports.
Validation tests are tests of the backend state-tracking and validation
code that don't require a GPU as they are running on the null backend.
This commit adds a very simple (and almost useless) BufferValidationTest
as an example of a validation test.
* First API design (many features missing, including input attachments)
* Metal implementation (no OpenGL yet)
* Render-to-texture demo (a little broken until we have depth buffers)
* Update examples to use render passes
- Add test for passing value arguments as well as aarrays of them
- Add test for passing C string
- Rework Object array argument test to pass multiple objects
This adds support for "natively defined" API types like callbacks that
will have to be implemented manually for each target language. Also this
splits the concept of "native method" into a set of native methods per
language.
Removes the "Synchronous error" concept that was used to make builders
work in the maybe Monad, this will have to be reinroduced with builder
callbacks.
Corentin Wallez
Kai Ninomiya
Austin Eng
Raul Tambre
Yunchao He
Yan, Shaobo
Jiawei Shao
Brandon Jones
Stephen White
Li Hao
Ryan Harrison
Stephen White
Kai Ninomiya
Corentin Wallez
msiglreith
Austin Eng
Ben Constable
Austin Eng