These fixes are lumped into two categories:
1. add new file, SDL_dataqueue.c, to UWP/WinRT build-inputs (via MSVC project
files)
2. implement a temporary, hack-fix for a build error in SDL_xinputjoystick.c.
Win32's Raw Input APIs are, unfortunately, not available for use in UWP/WinRT
APIs. There does appear to be a replacement API, available in the
Windows.Devices.HumanInterfaceDevice namespace.
This fix should be sufficient to get SDL compiling again, without affecting
Win32 builds, however using the UWP/WinRT API (in UWP/WinRT builds) would
almost certainly be better (for UWP/WinRT builds).
TODO: research Windows.Devices.HumanInterfaceDevice, and use that if and as
appropriate.
This currently doesn't affect absolute motion, which would need to be implemented on each windowing system so the cursor matches the reported mouse coordinates.
Diego
I was previously unaware that rotating the device to a different orientation when the keyboard is shown causes a keyboardWillHide followed by a keyboardWillShow notification. The previous patch would then mistakenly StopTextInput when rotating. This patch fixes that by checking if the device is rotating before stopping text input.
Ozkan Sezer
With rev. 10651, i.e. http://hg.libsdl.org/SDL/rev/747a6a795b21 ,
SDL2 - OS X builds fail to run on 10.6 (my setup: i686 / 10.6.8)
because the symbol _IOPMAssertionCreateWithDescription is missing.
The SDK listing it for 10.7+ does seem correct. Reverting r10651
and rebuilding makes it to function again.
Simon Hug
The SDL_BlitScaled function runs into an access violation for specific blit coordinates and surface sizes. The attached testcase blits a 800x600 surface to a 1280x720 surface at the coordinates -640,-345 scaled to 1280x720. The blit function that moves the data then runs over and reads after the pixel data from the src surface causing an access violation.
I can't say where exactly it goes wrong, but I think it could have something to do with the rounding in SDL_UpperBlitScaled. final_src.y is 288 and final_src.h is 313. Together that's 601, which I believe is one too much, but I just don't know the code enough to make sure that's the problem.
Sylvain
I think this patch fix the issue, but maybe it's worth re-writing "SDL_UpperBlitScaled" using SDL_FRect.
The non-deprecated approach (IOPMAssertion) already exists in SDL, and is
available in Mac OS X 10.6 and later (although it was incorrectly listed as
10.7 and later in SDL). Since SDL now requires 10.6 or later, this is no
longer conditionally used.
realitix
SDL2 allows to create widow and to get information through SDL_SysWMinfo.
But it misses something, with Vulkan, you need the HWND and HINSTANCE of the window for Win32 system.
Sadly, SDL2 provides only HWND but not HINSTANCE.
In some context, it can be difficult to get the HINSTANCE, indeed, I'm using pySDL2 (Python) and I can only access properties that SDL2 gives me.
I have to use a dirty trick like that to get the HINSTANCE: (https://raw.githubusercontent.com/bglgwyng/pyVulkan/master/examples/win32misc.py)
felix
Building SDL 2.0.5, or even the Mercurial snapshot (r10608) with GCC 6.2.1 and --enable-video-directfb generates a number of compiler diagnostics and fails.
Simon Hug
The software renderer produces incorrect results when blending textures at an angle with certain blend modes. It seems that there were some edge cases that weren't considered when the SW_RenderCopyEx function was last changed. Or another bug possibly covered up the problem. (More on that in another bug report.)
Most of the issues come from the fact that the rotating function sets a black colorkey. This is problematic because black is most likely appearing in the surface and the final blit will ignore these pixels. Unless a colorkey is already set (the software renderer currently never sets one), it's very hard to find a free color. Of course it could scan over the whole image until one is found, but that seems inefficient.
The following blend modes have issues when drawn at an angle.
NONE: The black pixels get ignored, making them essentially transparent. This breaks the 'dstRGBA = srcRGBA' definition of the NONE blend mode.
MOD: Again, the black pixels get ignored. This also breaks the 'dstRGB = dstRGB * srcRGB' definition of the MOD blend mode, where black pixels would make the destination black as well. A white colorkey will work though, with some preparations.
BLEND: There are some issues when blending a texture with a translucent RGBA target texture. I - uh - forgot what the problem here exactly is.
This patch fixes the issues mentioned above. It mainly changes the code so it tries to do things without the colorkey and removes the automatic format conversion part from the SDLgfx_rotateSurface function. Getting the format right is something the caller has to do now and the required code has been added to the SW_RenderCopyEx function.
There's a small change to the SW_CreateTexture function. RLE encoding a surface with an alpha mask can be a lossy process. Depending on how the user uses the RGBA channels, this may be undesired. The change that surfaces with an alpha mask don't get encoded makes the software renderer consistent with the other renderers.
The SW_RenderCopyEx function now does these steps: Lock the source surface if necessary. Create a clone of the source by using the pixel buffer directly. Check the format and set a flag if a conversion is necessary. Check if scaling or cropping is necessary and set the flag for that as well. Check if color and alpha modulation has to be done before the rotate. Check if the source is an opaque surface. If not, it creates a mask surface that is necessary for the NONE blend mode. If any of the flags were set, a new surface is created and the source will be converted, scaled, cropped, and modulated. The rest of the function stays somewhat the same. The mask also needs to be rotated of course and then there is the NONE blend mode...
It's surprisingly hard to get the pixel from a rotated surface to the destination buffer without affecting the pixel outside the rotated area. I found a way to do this with three blits which is pretty hard on the performance. Perhaps someone has an idea how to do this faster?
As mentioned above, the SDLgfx_rotateSurface now only takes 8-bit paletted or 32-bit with alpha mask surfaces. It additionally sets the new surfaces up for the MOD blend mode.
I shortly tested the 8-bit path of SDLgfx_rotateSurface and it seemed to work so far. This path is not used by the software renderer anyway.
Vitaly Novichkov
Okay, when I researched code and algorithm, I tried to replace condition "while(dst >= target)" with "while(dst > target)" and crashes are gone.
Seems on some moments it tries to write into the place before memory block begin, therefore phantom crashes appearing after some moments.
Sylvain 2016-11-07 08:49:34 UTC
when rotated +90 or -90, some transparent lines appears, though there is no Alpha or ColorKey.
if you set a dummy colorkey, it will remove the line ...
if you set a some alpha mod, the +90/-90 get transparent but not the 0/180 ...
x414e54
It is a bit of a pain to update the library or rely on whatever version the user has on their computer for default mappings.
So providing an easily updatable text file via SDL_GameControllerAddMappingsFromFile is still currently the most viable way. However using this replaces all mappings provided by the SDL_HINT_GAMECONTROLLERCONFIG environment variable which may have come from the user's custom Steam mapping.
There should be an easy way for games to supply extra game controller mappings to fill in the differences between SDL versions without it clobbering the SDL_HINT_GAMECONTROLLERCONFIG environment variable.
Internally the mappings could use a priority system and if the priority is lower then it will not overwrite the mappings.
For now it just assumes SDL_HINT_GAMECONTROLLERCONFIG is the highest priority, the default hardcoded are the lowest and anything set via the API is medium.
Mark Pizzolato
On Windows with Visual Studio, when building SDL as a static library using the x86 (32bit) mode, several intrinsic operations are implemented in code in SDL_stdlib.c.
One of these, _allshr() is not properly implemented and fails for some input. As a result, some operations on 64bit data elements (long long) don't always work.
I classified this bug as a blocker since things absolutely don't work when the affected code is invoked. The affected code is only invoked when SDL is compiled in x86 mode on Visual Studio when building a SDL as a static library. This build environment isn't common, and hence the bug hasn't been noticed previously.
I reopened#2537 and mentioned this problem and provided a fix. That fix is provided again here along with test code which could be added to some of the SDL test code. This test code verifies that the x86 intrinsic routines produce the same results as the native x64 instructions which these routines emulate under the Microsoft compiler. The point of the tests is to make sure that Visual Studio x86 code produces the same results as Visual Studio x64 code. Some of the arguments (or boundary conditions) may produce different results on other compiler environments, so the tests really shouldn't be run on all compilers. The test driver only actually exercised code when the compiler defines _MSC_VER, so the driver can generically be invoked without issue.
Ozkan Sezer
On systems with old glibc, such mine with glibc-2.8, the following warning
is issued and is fixed easily by defining _GNU_SOURCE:
/home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c: In function 'CalculateXRandRRefreshRate':
/home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c:263: warning: implicit declaration of function 'round'
/home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c:263: warning: incompatible implicit declaration of built-in function 'round'
x414e54
I have implemented Drag and Drop and Clipboard support for Wayland.
Drag and dropping files from nautilus to the testdropfile application seems to work and also copy and paste.
This no longer uses a script to generate code for every possible type
conversion or resampler. This caused a bloat in binary size and and compile
times. Now we use a handful of more generic functions and assume staying in
the CPU cache is the most important thing anyhow.
This shrinks the size of the final build (in this case: macOS X amd64, -Os to
optimize for size) by 15%. When compiling on a single core, build times drop
by about 15% too (although the previous cost was largely hidden by multicore
builds).
Alex Baines
I realized overnight that my patch probably broke text input events with UIM, and I confirmed that it does. Can't believe I overlooked that... I've been making stupid mistakes in these patches recently, sorry.
Anyway, *this* one seems to fix it properly. Knowing my luck it probably breaks something else.
Patch uses XkbFreeKeyboard to free the memory returned by XkbGetMap.
Earlier implementation called XkbFreeClientMap which frees all the maps
but not data->xkb structure itself, XkbFreeKeyboard will free maps and
the structure.
Kai Sterker
SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings.
As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.
/home/fedora/SDL2-2.0.5/src/video/SDL_blit_N.c: In function 'calc_swizzle32':
/home/fedora/SDL2-2.0.5/src/video/SDL_blit_N.c:127:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
const vector unsigned char plus = VECUINT8_LITERAL(0x00, 0x00, 0x00, 0x00,
^
Kai Sterker
Apparently, SDL2 on Haiku does not generate SDL_TEXTINPUT events.
Attached is a patch that adds this functionality.
Tested with SDLs own checkkeys program and different keymaps as well as my own SDL application and German keyboard layout to verify it generates the expected input.
Albert Casals
On a RaspberryPI, it might become convenient to specify the Dispmanx layer SDL uses.
Currently, it is hardcoded to be 10000 to sit above most applications.
This can be specially useful when integrating other graphical apps and frameworks like OMXplayer, QT5 etc.. in order to have more flexibility on their Z-order.
ny00
Unfortunately, simply checking the return codes of "onNativePadDown/Up" as previously done has its own issue:
If an SDL joystick is connected *and* opened, then a proper KeyEvent, say with keycode KEYCODE_BUTTON_1, should lead to an SDL joystick button event as expected.
If, however, the joystick was *not* opened, then "onNativePadDown/Up" will return a negative value, so before the commit from bug 3426, you could unexpectedly get a keyboard event. (In practice, you'll just get a log message, since KEYCODE_BUTTON_1 has no mapping to a proper SDL_ScanCode value, but it's still an problem).
What should still be done, though, is checking the key code itself. We do have the KeyEvent.isGamepadButton method, but according my test, it returns "true" exactly (and only) for the KEYCODE_BUTTON* values, and not for KEYCODE_DPAD* or any other key code.
Here is a possible solution:
- Do check the return codes of "onNativePadDown/Up" as previously done.
- In addition, in "Android_OnPadDown/Up" from src/joystick/android/SDL_sysjoystick.c, 0 should *always* be returned in case the key code can be translated to an SDL_joystick button; Even if no matching joystick can be found.
Philipp Wiesemann
Maybe the fault is in the SDL_VIDEO_DRIVER_WINDOWS section in SDL_InitSubSystem() of "src/SDL.c". Because there only SDL_INIT_JOYSTICK is checked. The flags are adapted for SDL_INIT_GAMECONTROLLER afterwards.
Eric Wasylishen
The patch makes StartTextInput/StopTextInput call Xutf8ResetIC ( https://www.x.org/releases/X11R7.5/doc/man/man3/XmbResetIC.3.html ) on the XIC of all SDL windows.
This fixes my use case in Quakespasm (Ubuntu 16.04, system keyboard layout set to German. Type the '^' dead key, which opens Quakespasm's developer console and calls SDL_StartTextInput, then press 'e'. I expect the dead key to be ignored.)
Also, here is a patch for sdl2's "checkkeys" for testing this: https://bugzilla-attachments.libsdl.org/attachment.cgi?id=2451
Olav Sorensen
After a drag and drop event, any following mouse button input (down/up) doesn't generate an event. Clicking any mouse button a *second* time generates an event like it should.
Further investigation shows that the new SDL_HINT_MOUSE_FOCUS_CLICKTHROUGH logic also causes this issue in other cases, like the first time you open the program and click the mouse.
Simon Hug
There are currently three entry points in the SDL2_main code for windows: main, wmain and WinMain. Only the latter two properly convert the arguments to UTF-8.
Console applications linked with MSVC will always link with the main entry point (wmain has to be selected by manually setting the entry point). This makes it likely that such programs will not have proper unicode arguments.
Sylvain
After a long time, I found out more clearly what was going wrong.
The native libraries should be built with a "APP_PLATFORM" as low as possible.
Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml
So that the application never runs on a lower APP_PLATFORM than it has been built for.
An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10
(If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10.
And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".)
to precise what happened in the initial reported test-case:
Let say the "c" code contains a call to "srand()".
with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()".
with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()".
but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()).
So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10.
That was the issue. The path tried to fix this by in fact always calling srand48().
SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform.
It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions.
Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
Robert Folland
When running this little test program with SDL2 on Wayland it often crashes in SDL_Init.
From a backtrace it is apparent that there is a race condition in creating a xkb_context_ref. Sometimes it is 0x0.
By moving the relevant lines higher up in Wayland_VideoInit (in SDL2-2.0.4/src/video/wayland/SDL_waylandvideo.c:302) this seems to get fixed.
I moved the call to WAYLAND_xkb_context_new() up to before the call to WAYLAND_wl_display_connect().
Here is the test program (just a loop of init and quit), and a backtrace from gdb:
#include <cstdio>
#include <stdlib.h>
#include <SDL2/SDL.h>
#include <unistd.h>
#include <iostream>
int main(int argc, char **argv)
{
int count = atoi(argv[1]);
for (int i = 0; i < count; i++) {
std::cout << "Init " << i << std::endl;
if (SDL_Init(SDL_INIT_VIDEO) < 0) {
SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
"Couldn't initialize SDL: %s\n",
SDL_GetError());
return 1;
}
std::cout << "Quit" << std::endl;
SDL_Quit();
}
return 0;
}
Init 12
Quit
Init 13
Program received signal SIGSEGV, Segmentation fault.
xkb_context_ref (ctx=ctx@entry=0x0) at src/context.c:156
156 ctx->refcnt++;
(gdb) bt
#0 xkb_context_ref (ctx=ctx@entry=0x0) at src/context.c:156
#1 0x00007ffff5e1cd4c in xkb_keymap_new (ctx=0x0, format=XKB_KEYMAP_FORMAT_TEXT_V1, flags=flags@entry=XKB_KEYMAP_COMPILE_NO_FLAGS) at src/keymap-priv.c:65
#2 0x00007ffff5e1c6cc in xkb_keymap_new_from_buffer (ctx=<optimized out>,
buffer=0x7ffff7fd5000 "xkb_keymap {\nxkb_keycodes \"(unnamed)\" {\n\tminimum = 8;\n\tmaximum = 255;\n\t<ESC>", ' ' <repeats 16 times>, "= 9;\n\t<AE01>", ' ' <re
peats 15 times>, "= 10;\n\t<AE02>", ' ' <repeats 15 times>, "= 11;\n\t<AE03>", ' ' <repeats 15 times>, "= 12;\n\t<AE04>", ' ' <repeats 12 times>..., length=48090,
format=<optimized out>, flags=<optimized out>) at src/keymap.c:191
#3 0x00007ffff7b8ea4e in keyboard_handle_keymap (data=0x6169b0, keyboard=<optimized out>, format=<optimized out>, fd=5, size=48091)
at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/wayland/SDL_waylandevents.c:269
#4 0x00007ffff64501f0 in ffi_call_unix64 () from /usr/lib/libffi.so.6
#5 0x00007ffff644fc58 in ffi_call () from /usr/lib/libffi.so.6
#6 0x00007ffff665be3e in wl_closure_invoke (closure=closure@entry=0x61f000, flags=flags@entry=1, target=<optimized out>, target@entry=0x616d20,
opcode=opcode@entry=0, data=<optimized out>) at src/connection.c:949
#7 0x00007ffff6658be0 in dispatch_event (display=<optimized out>, queue=<optimized out>) at src/wayland-client.c:1274
#8 0x00007ffff6659db4 in dispatch_queue (queue=0x617398, display=0x6172d0) at src/wayland-client.c:1420
#9 wl_display_dispatch_queue_pending (display=0x6172d0, queue=0x617398) at src/wayland-client.c:1662
#10 0x00007ffff665a0cf in wl_display_roundtrip_queue (display=0x6172d0, queue=0x617398) at src/wayland-client.c:1085
#11 0x00007ffff7b8faa0 in Wayland_VideoInit (_this=<optimized out>) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/wayland/SDL_waylandvideo.c:302
#12 0x00007ffff7b7aed6 in SDL_VideoInit_REAL (driver_name=<optimized out>, driver_name@entry=0x0) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/SDL_video.c:513
#13 0x00007ffff7ae0ee7 in SDL_InitSubSystem_REAL (flags=16416) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/SDL.c:173
#14 0x0000000000400b24 in main (argc=2, argv=0x7fffffffebb8) at vplay-init.cpp:13
(gdb)
Eric wing
Sometimes an SDL_assert triggers at RPI_WarpMouseGlobal
src/video/raspberry/SDL_rpimouse.c:232 'update'.
It doesn't always reproduce, but it seems to happen when you really bog down the system and the event loop can't update for awhile.
The first time I hit this, I wasn't even using the mouse. I don't call any warp mouse functions either.
I can usually reproduce with a simple program that runs an expensive blocking CPU series of functions which blocks the main loop until complete (can be up to 10 seconds).
Sometimes this assertion gets triggered after that. I'm not sure if
they are related or coincidental.
Disabling the SDL_asserts when compiling SDL will avoid this problem. I actually haven't seen any problems with the mouse when I do this.
On a Raspberry Pi 2 running Raspbian Jessie.
Call SDL_GL_GetDrawableSize() directly because we may be in the initialization path and SDL_GetRendererOutputSize() will fail because the renderer magic isn't set up yet.
Daniel Gibson
Ok, I followed the simple approach of just making SDL_PIXELFORMAT_RGBA32 an alias of SDL_PIXELFORMAT_RGBA8888/SDL_PIXELFORMAT_ABGR8888, depending on endianess. And I did the same for SDL_PIXELFORMAT_ARGB32, .._BGRA, .._ABGR.
SDL_GetPixelFormatName() will of course return SDL_PIXELFORMAT_RGBA8888 (or SDL_PIXELFORMAT_ABGR8888) instead of SDL_PIXELFORMAT_RGBA32, but as long as that's mentioned in the docs it shouldn't be a problem.
Apparently some systems see "hw:", some see "default:" and some see
"sysdefault:" (and maybe others!). My workstation sees both "hw:" and
"sysdefault:" ...
Try to find a prefix we like and prioritize the prefixes we (think) we want
most. If everything else fails, if there's a "default" (not a prefix) device
name, list that by itself so the user gets _something_ here.
If we can't find a prefix we like _and_ there's no "default" device, report
no hardware found at all.
Weitian Leung
Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too),
enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
D39 does not support negative viewport values which the current implementation relies on.
D3D11 does support negative viewport values so that will continue working.
Refer to Bug 2799.
x414e54
Wayland will sometimes send empty resize events (0 width and 0 height) to the client. I have not worked out the exact conditions a client would receive these but I can assume it might be if the window is offscreen or not mapped yet.
This causes issues with some SDL clients as they receive the 0x0 event and unexpected resize event or might not request to resize back to the correct size.
As per the wl_shell Wayland spec configure events are only a suggestion and the client is free to ignore or pick a different size (this is how min/max and fixed aspect ratio is supped to be implemented).
A patch is attached but is just the first iteration and I will fix any issues such as checking for FULLSCREEN/MAXIMIZED or RESIZABLE flags unless someone else fixes this first.
I have update to take into account non resizable and fullscreen windows. Also adding in maximize/restore and title functions for Wayland.
Darren Kulp
The dummy video driver is not available on Mac OS X if SDL_VIDEO_OPENGL is set at library compilation time.
In src/video/SDL_video.c, there is a compile-time check in SDL_CreateWindow() for (SDL_VIDEO_OPENGL && __MACOSX__). When it succeeds, SDL_WINDOW_OPENGL is always requested. Since the dummy video driver does not supply an OpenGL implementation, the error "No OpenGL support in video driver" is supplied to the user, and SDL_CreateWindow() is exited early.
Adam M.
When doing a rotated texture copy with the software renderer, where the angle is a multiple of 90 degrees, one or two edges of the image get cut off. This is because of the following line in sw_rotate.c:
if ((unsigned)dx < (unsigned)sw && (unsigned)dy < (unsigned)sh) {
which is effectively saying:
if (dx >= 0 && dx < src->w-1 && dy >= 0 && dy < src->h-1) {
As a result, it doesn't process pixels in the right column or bottom row of the source image (except when they're accessed as part of the bilinear filtering for nearby pixels). This causes it to look like the edges are cut off, and it's especially obvious with an exact multiple of 90 degrees.
Nitz
In function SDLgfx_rotateSurface:
rz_dst =
SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS,
rz_src->format->Rmask, rz_src->format->Gmask,
rz_src->format->Bmask, rz_src->format->Amask);
Here rz_src get De-referenced without NULL check, which is risky.
Simon Sandstr?m
As stated in Summary. The switch statement will execute the default case and set a SDL error message: "SDL_MixAudio(): unknown audio format".
There are atleast two more problems here:
1. SDL_MixAudioFormat does not notify the user that an error has occured and that a SDL error message was set. It took me awhile to understand why I couldn't mix down the volume on my AUDIO_U16LSB formatted audio stream.. until I started digging in the SDL source code.
2. The error message is incorrect, it should read: "SDL_MixAudioFormat(): unknown audio format".
Daniel Gibson
Currently, SDL_CreateRGBSurface() and SDL_CreateRGBSurfaceFrom() take Uint32 masks for RGBA to "describe" the Pixelformat of the surface.
Internally those value are only used to map to one of the SDL_PIXELFORMAT_* enum values that are used for further processing.
I think it would be both handy and more efficient to be able to specify SDL_PIXELFORMAT_* yourself without using SDL_PixelFormatEnumToMasks() to create masks first, so I implemented functions that do that:
SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() which are like the versions without "WithFormat" but instead of taking 4 Uint32s for R/G/B/A masks, they take one for a SDL_PIXELFORMAT_* enum value.
Together with https://bugzilla.libsdl.org/show_bug.cgi?id=2923 creating a SDL_Surface* from RGBA data (e.g. from stb_image) is as easy as
surf = SDL_SDL_CreateRGBSurfaceWithFormat(0, w, h, bppToUse*8, SDL_PIXELFORMAT_RGBA32);
Ryan C. Gordon
We still include iconv.h in SDL_stdinc.h, probably because this header might have referenced the native iconv functions and types directly. Since these are hidden behind a stable ABI now and never just a #define for the system iconv, we shouldn't need this header included from a public SDL header anymore, slowing down external apps compiles and pulling tons of stuff into the namespace.
Jan Klass
Not sure if this is limited to the joystick subsystem,
but I created a minimal program for reproducibility,
which is attached.
The issue occurs with my gamepad Razer Onza (an xbox-style gamepad) plugged in.
On initialization, the gamepad is being recognized.
After quitting the subsystem, the poll will receive the joystick added event,
which it instantly handles itself, calling SDL_SYS_JoystickDetect again,
which this time calls IDirectInput8_EnumDevices with dinput = NULL (after it was released on quit).
This seems to lead to an access violation within said function, which I have no source for.
Jan Hellwig
On Windows, you are able to navigate between the buttons on a MessageBox that was created using SDL_ShowMessageBox using the arrow keys. However, if you press the left arrow key, the selection jumps to the button on the right of the currently selected one (and vice versa).
This can be fixed by reversing the order in which the buttons are added to the dialog.
The attached patch files fixes this problem. However the first press of an arrow key leads to the selection of the leftmost or rightmost button on the MessageBox, not to the selection of the button left/right of the one that is selected by default.
Ryochan7
I have been using SDL 2 for a little project that I have been developing for a while. My project is called antimicro and it takes gamepad input and then translates gamepad events into keyboard and mouse events. SDL is used to read the input from an XInput gamepad and it works great for the most part. However, there is one glaring problem that I have encountered.
When a device is unplugged and SDL sends the centered value release events for all axes, buttons, and hats, SDL does not use the proper centered value for the triggers. It pushes an SDL_JOYAXISMOTION event onto the queue with a value of 0 for all axes. That value is converted to around 16,000 for a Game Controller. That value is incorrect for triggers and, in my program, that causes any bindings that are assigned to the triggers to get activated. With most profiles, that will typically mean that a mouse right click and left click will be activated before the device is finally seen as removed and then those bindings are released by antimicro.
Jonas Kulla
At startup time, the single android window is assigned a "windowed" (window->windowed.{w,h}) size based on the current orientation of the mobile device; this size is never updated throughout the lifetime of the app.
This becomes problematic when the app is paused and then resumed in an orientation that it did not start up in. Eventually, 'SDL_OnWindowRestored()' is called, which calls 'SDL_UpdateFullscreenMode()'. This function is very problematic because it is written with a desktop monitor in mind: it tries to find a matching display mode for the windowed size, doesn't find any, and finally applies the windowed size as the fullscreen one. In the end, the windowed size is reported in a RESIZED event, which doesn't correspond to the actual surface size.
To see this in action: Start an orientation aware SDL app in eg. portrait mode, suspend the app, put the device into landscape orientation and resume the app. It will erroneously render in portrait mode (until the device is rotated again).
This tends to be a frequent spot where drivers hang, and the waits were
often unreliable in any case.
Instead, our audio thread now alerts the driver that we're done streaming audio
(which currently XAudio2 uses to alert the system not to warn about the
impending underflow) and then SDL_Delay()'s for a duration that's reasonable
to drain the DMA buffers before closing the device.
This tries to make SDL robust against device drivers that have hung up,
apps don't freeze in catastrophic (but not necessarily uncommon) conditions.
Now we detach the audio thread and let it clean up and don't care if it
never actually runs to completion.
James Zipperer
The problem I was seeing was that the the ALSA hotplug thread would call SDL_RemoveAudioDevice, but my application code was not seeing an SDL_AUDIODEVICEREMOVED event to go along with it. To fix it, I added some code into SDL_RemoveAudioDevice to call SDL_OpenedAudioDeviceDisconnected on the corresponding open audio device. There didn't appear to be a way to cross reference the handle that SDL_RemoveAudioDevice gets and the SDL_AudioDevice pointer that SDL_OpenedAudioDeviceDisconnected needs, so I ended up adding a void *handle field to struct SDL_AudioDevice so that I could do the cross reference.
Is there some other way beside adding a void *handle field to the struct to get the proper information for SDL_OpenedAudioDeviceDisconnected?
James Zipperer
Close the audio device before waiting for the audio thread to complete, which fixes a situation where the audio thread never completes
Add an additional check in the audio thread to see if the device is enabled and bail out if the device is no longer enabled
Joe Thompson
With Direct Input device (MOMO Steering Wheel w/FF)
with SDL 2.0.3,
SDL_HapticOpenFromJoystick() would fail. (Can't set exclusive mode)
Now with 2.0.4 rc1,
SDL_HapticOpenFromJoystick() succeeds but the the returned SDL_Haptic* cannot be used. Calls to SDL_HapticNewEffect() fail with "Haptic error Unable to create effect"
If SDL_HapticOpen() is used instead of HapticOpenFromJoystick(), the device is usable. Calls to HapticNewEffect() succeed with the exact same parameters as the previous failing call.
I have attached a proposed patch for this issue.
When using SDL_HapticOpenFromJoystick(), the original code did not (re)enumerate the axes. This returned a new haptic device with 0 axes. Later, when a new effect is created, SDL_SYS_SetDirection() would set the flags to include DIEFF_SPHERICAL, regardless of what the caller actually set. (see Line 566 in SDL_dinputhaptic.c). This would cause the SDL_HapticNewEffect() to fail (or interpret the coordinates incorreclty.)
The patch moves the call to IDirectInputDevice8_EnumObjects() outside of the if() block so that the axes are (re)enumerated for the new haptic device.
Note: For steering wheels it is common for the joystick to have multiple axes (ie steering, throttle, brake), but the haptic portion of the joystick usually only applies to steering.
Fixes Bugzilla #3441.
"When using internal SDL_vsnprintf(), and source string length is greater
than destination, the final NULL char will be written beyond destination size.
Primary issue that is SDL_strlcpy returns length of source string
(SDL_PrintString()), not how much is written to destination. The destination
ptr is then incremented by this length before the sanity check is done.
Destination string is properly terminated, but an extra NULL char will be
written beyond destination buffer length.
Patch used internally is attached which fixes primary issue with SDL_strlcpy()
in SDL_PrintString() and adjusts sanity checks to increment destination ptr
safely."
Tim McDaniel
Using checkkeys test app:
* Press and hold Caps Lock key.
* checkkeys reports a CapsLock key pressed event and a CapsLock key released event.
* Release Caps Lock key.
* checkkeys reports no further events.
This patch fixes OSX Caps Lock up/down event detection by installing a HID callback.
John Wordsworth
While attempting to integrate CEF (Browser) into an SDL application, we noticed that there were problems on OS X where approximately 50% of the input events were essentially being lost - even when we were using off-screen rendering in CEF and passing through input events manually.
It appears that this problem has been around for a while (see: http://www.magpcss.org/ceforum/viewtopic.php?f=6&t=11141).
Please consider the following patch that fixes this issue. Instead of processing events directly after calling [NSApp nextEventMatchingMask:...] we now pass these events down to NSApp, for processing by an overloaded sendEvent: method. Chromium also forwards events to NSApp in the same way, which means we don't miss events, even if they were originally dequeued by CEF.
Daniel
Seems like check of the visibility of renderer (renderer->hidden) is missing in SDL_RenderCopyEx.
In SDL_RenderCopy it should be done much earlier (after checking support for RenderCopyEx, line 1750).
Michael
In SDL_x11modes.c the CalculateXRandRRefreshRate() function performs integer math on values that may return fractional results. This causes a value that would be calculated as 59.99972... to be returned as 59. In Linux the xrandr command returns 60Hz for this particular display mode yet SDL returns 59Hz.
I suggest this function be updated to correctly round the result of the calculation instead of truncating the result.
Machiel van Hooren
In SDL_dxjoystick.c line 349 there is a constant c_dfDIJoystick2.
However, this constant is aparently also defined in dinput8.lib.
I encountered a linking error when statically linking to SDL:
SDL2_static.lib(SDL_dxjoystick.obj) : error LNK2005: _c_dfDIJoystick2 already defined in dinput8.lib
My application is also linking to dinput8.lib because we rolled our own joystick input and are not using the joystick functionality from SDL.
Patrick Gutlich
The mouse cursor gets corrupted when the mouse moves over the screen edges (right and bottom) a weird type of scaling seems to occur and you end up with a blank square.
tvc
I've spent the last few days implementing touchscreen support in core/linux/SDL_evdev.c. It's fairly rudimentary at the moment, as can be seen from the multiple TODO's and FIXME's littered throughout, but I'm mainly submitting this patch for review. I've tested this patch on my Raspberry Pi 2 with the official touchscreen and it works fantastically, reporting all 10 multitouch points. I'm happy to work on this further, the evdev logic also needs a bit of a cleanup I think (I may have included a few changes). But if it's good enough in its current state to be committed then I'm sure there'd be plenty of people pleased, as currently the only other framework/library that supports touchscreens on the Raspberry Pi is Kivy.
Fritzor
Source Suface is ABGR and Destination Surface is ABGR. We use software blending. In the Switch-Case statement for SDL_COPY_BLEND (Line 126) the alpha-channel is not calculated like in every SDL_blit_auto - function. So if the destination Surface has alpha - channel of zero the resulting surface has zero as well.
Add: ?dstA = srcA + ((255 - srcA) * dstA) / 255;? to code and everything is okay.
Marcel Bakker
Observed when resizing or moving a window in Windows 7.
Depending on how you resize/move your window
, you may receive none or a lot of SDL_WINDOWEVENT_EXPOSED events
, at the moment you release the mouse button.
Maybe add this event to an already existing list of overflow candidates ?
Yann Dirson
When attempting to force use of opengles2 renderer with:
int wanted_renderer = -1;
for (int i = 0; i < numrenderers; i++) {
SDL_RendererInfo renderer_info;
if (SDL_GetRenderDriverInfo(i, &renderer_info) != 0) {
SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, "Couldn't get renderer driver info: %s\n",
SDL_GetError());
quit(2);
}
std::cerr << "Renderer " << i << " '" << renderer_info.name << "': flags=0x"
<< std::hex << renderer_info.flags << std::dec
<< ", " << renderer_info.num_texture_formats << " texture formats, max="
<< renderer_info.max_texture_width << "x"
<< renderer_info.max_texture_height << "\n";
if (!strcmp(renderer_info.name, "opengles2")) {
std::cerr << " selecting!\n";
wanted_renderer = i;
}
}
renderer = SDL_CreateRenderer(window, wanted_renderer, 0);
... on banana pi or raspberry pi I get an error like the following (the actual
context profile value varies, being used uninitialized)
ERROR: Couldn't create renderer: Unknown OpenGL context profile 900
With this patch I get the following, which should help more pointing to a real problem:
ERROR: Couldn't create renderer: Failed getting OpenGL glGetString entry point
I pushed a patch (based on master branch of unofficial git mirror):
550389c89f
I'll be opening a different bug for the underlying issue.
Evgeny Vrublevsky
Original code in the video/windows/SDL_windowsevents.c registers obsolete WNDCLASS (not WNDCLASSEX). As the result only one icon size is used as the small and normal icons. Also original code doesn't specify required size of an icon. As the result when 256x256 icon is available, the program uses it as a default icon, and it looks ugly.
We have to use WNDCLASSEX and load icons with proper sizes which we can get using GetSystemMetrics.
Better idea. We could use the first icon from resources, like the Explorer does. Patch is included. It also correctly loads large and small icons, so it will look nice everywhere.
ny00
Using the OpenGL ES 1.1 renderer, after updating a texture with SDL_UpdateTexture (or SDL_UnlockTexture), a following call to SDL_RenderFillRect draws a rectangle with the wrong color (which appears to be the same as the texture's top-left pixel).
Comparing SDL_render_gles.c:GLES_UpdateTexture to SDL_render_gl.c:GL_UpdateTexture, a missing call to glDisable appears to be the cause. After adding it back, the bug is resolved.
ny00
On Android, the keycodes KEYCODE_BUTTON_1..16 (actual values 188-203) are translated to SDL_Joystick buttons no. 20-35. These are currently ignored in SDL_gamecontroller.c.
The attached patch fixes this, by increasing k_nMaxReverseEntries from 20 to another arbitrary bound of 48.
Side-note: Maybe some log should be emitted in case of going over any such bound?
Diego
The keyboard on iPads has a dismiss button that hides the keyboard. When the keyboard was hidden using that button, instead of the return key, SDL was still reporting IsTextInputActive as true. This patch adds an extra SDL_StopTextInput when iOS reports the keyboard will hide.
Simon Hug
The SDLmain file src/main/windows/SDL_windows_main.c defines both entry points for console applications, main and wmain. This seems to confuse MSVC. It outputs a LNK4067 warning and then chooses main, which is a shame because only wmain has the unicode handling. Using SDLmain.lib provided on libsdl.org, the linker also goes for main.
I'm proposing to not define the main entry point at all. wmain should be supported well enough with MSVC.
Eric Wasylishen
The bug here is that a dead keys pressed before calling SDL_StartTextInput() carries over into future text input, so the next key pressed will have the deadkey applied to it.
This in undesirable, imho, and doesn't occur on OS X (haven't check Linux or elsewhere). It's causing a problem for Quakespasm on German keyboard layouts, where we use the ^ deadkey to toggle the console (which enables/disables text input), and ^ characters are showing up in the TEXTINPUT events.
Simon Hug
The function console_wmain in src/main/windows/SDL_windows_main.c does not null terminate the argument list it is creating. As specified by the C standard, "argv[argc] shall be a null pointer."
The SDLTest framework makes use of that null pointer and some test programs can cause an access violation because it's missing.
Simon Hug
The description of the SDL_RenderClear function in the SDL_render.h header says the following:
"This function clears the entire rendering target, ignoring the viewport."
The word "entire" implies that the clipping rectangle set with SDL_RenderSetClipRect also gets ignored. This is left somewhat ambiguous if only the viewport is mentioned. Minor thing, but let's see what the implementations actually do.
The software renderer ignores the clipping rectangle when clearing. It even has a comment on this: /* By definition the clear ignores the clip rect */
Most other render drivers (opengl, opengles, opengles2, direct3d, and psp [I assume. Can't test it.]) use the scissor test for the ClipRect and don't disable it when clearing. Clearing will only happen within the clipping rectangle for these drivers.
An exception is direct3d11 which uses a clear function that ignores the scissor test.
Simon Hug
When updating the viewport in GLES_UpdateViewport, the OpenGL ES renderer doesn't flip the projection matrix for target textures. The lines, rectangles and textures (if drawn with glDrawArrays) are upside down when drawing to target textures.
Simon Hug
The OpenGL ES 2 renderer does not check the target texture format when using SDL_RenderReadPixels and just always uses ABGR8888. This can result in swapped or wrong colors.
The attached patch adds a check and selects the target texture format, if a texture is set as the target.
Simon Hug
All OpenGL renderers always flip the rows of the pixels that come from glReadPixels. This is unnecessary for target textures since these are already top down.
Also, the rect->y value can be used directly for target textures for the same reason. I don't see any code that would handle the logical render size for target textures. Or am I missing something?
The attached patch makes the renderers only the flip rows if the data comes from the default framebuffer.
Simon Hug
The current SDL_SaveBMP_RW function that saves surfaces to a BMP uses an old bitmap header which doesn't officially support alpha channels. Applications just ignore the byte where the alpha is stored. This can easily be extended by using a newer header version and setting the alpha mask.
The attached patch has these changes:
- Extending the description of the function in the SDL_surface.h header with the supported formats.
- Refining when surfaces get stored to a 32-bit BMP. (Must have bit depth of 8 or higher and must have an alpha mask or colorkey.)
- Fixing a small bug that saves 24-bit BGR surfaces with a colorkey in a 24-bit BMP.
- Adding code that switches to the bitmap header version 4 if the surface has an alpha mask or colorkey. (I chose version 4 because Microsoft didn't lose its documentation behind a file cabinet like they did with version 3.)
- Adding a hint that can disable the use of the version 4 header. This is for people that need the legacy header or like the old behavior better. (I'm not sure about the hint name, though. May need changing if there are any rules to that.)
Simon Hug
The GL_SetBlendMode and GLES_SetBlendMode functions of the opengl and opengles renderers call the glTexEnvf to set the texture env mode to either GL_MODULATE (the default) or GL_REPLACE for the NONE blend mode. Using GL_REPLACE disables color and alpha modulation for textures.
These glTexEnv calls were put in the SetBlendMode function back in 2006 [1], but there the NONE code still used the GL_DECAL mode. The GL_REPLACE mode came in 2008 [2]. I'm a bit confused why that wasn't always GL_MODULATE and a bit surprised nobody reported that yet (unless I missed it). I guess only a few use the gles renderer and the newish shaders mask the issue.
Simon Hug
The GL_CreateTexture function doesn't have any checks for the case where the driver doesn't support the framebuffer object extension. It will call into GL_GetFBO which will call the non-existent glGenFramebuffersEXT.
Also, for some reason GL_CreateContext always sets the SDL_RENDERER_TARGETTEXTURE info flag, even if it is not supported. Changeset cc226dce7536 [1] makes this change, but doesn't explain why. It seems to me like the code would already have taken care of this [2].
The attached patch adds some checks and stops SDL from reporting render target support if there is none. The application can then properly inform the user instead of just crashing.
Simon Hug
When the SDL_Blit_Slow function compares the pixel to the color key it does so without removing the alpha component from the pixel value and the key. This is different from the optimized 32-bit blitters which create a rgb mask and apply it to both to filter the alpha out. SDL_Blit_Slow will only skip the pixels with the exact alpha value of the key instead of all pixels with the same color.
The attached test case blits a surface with a color key and prints the pixel values to the console. The third row is expected to be skipped.
Simon Hug
It seems not everyone implemented glDrawTexfOES the same. Intel and Mesa ignore the viewport entirely, whereas the Raspberry Pi implementation offsets the coordinates and does viewport clipping.
The glDrawTexfOES extension text [1] for the function says "Xs and Ys are given directly in window (viewport) coordinates." I guess this wasn't clear enough.
Alex Szpakowski
Honestly I'd probably remove that codepath from SDL_Render entirely. It's an OpenGL ES 1-specific extension that isn't likely to give huge performance gains and adds additional maintenance overhead to SDL_Render while also having bugs in some drivers (as seen here).
SFC30 controller: http://www.8bitdo.com/sfc30/
The SFC30 controller can present itself in a variety of modes and it offers up
different names in each. This patch captures data for three modes (one USB and
two Bluetooth) on three platforms (Mac OS X, Windows, Linux).
However, USB mode on Linux and Windows is missing as the button events did not
make it through to SDL's controllermap tool on Fedora 24/Linux 4.5.5 nor Steam
Big Picture mode on Windows. The two Bluetooth modes were indistinguishable on
Windows. Two modes on OS X were indistinguishable.
There exists a similar controller called the SNES30 (And some others) that are
very likely identical except for the name, but I have not verified this yet so
haven't synthesized lines for those controllers until I can.
Kai Sterker
There are already patches available from mingw64 that fix the issue
https://github.com/Alexpux/MINGW-packages/tree/master/mingw-w64-SDL2
With those applied, I could compile SDL2 without problems. But of course, it would be preferable if SDL built cleanly from source.
Vitaly Novichkov
Line 124
====================================================================
const DWORD flags = thread->stacksize ? STACK_SIZE_PARAM_IS_A_RESERVATION : 0;
====================================================================
Error of compiler:
====================================================================
CC build/SDL_systhread.lo
src/thread/windows/SDL_systhread.c: In function 'SDL_SYS_CreateThread':
src/thread/windows/SDL_systhread.c:124:45: error: 'STACK_SIZE_PARAM_IS_A_RESERVA
TION' undeclared (first use in this function)
const DWORD flags = thread->stacksize ? STACK_SIZE_PARAM_IS_A_RESERVATION :
0;
^
src/thread/windows/SDL_systhread.c:124:45: note: each undeclared identifier is r
eported only once for each function it appears in
make: *** [build/SDL_systhread.lo] Error 1
====================================================================
Fixing when I adding into begin of the file:
====================================================================
#ifndef STACK_SIZE_PARAM_IS_A_RESERVATION
#define STACK_SIZE_PARAM_IS_A_RESERVATION 0x00010000
#endif
====================================================================
The Apple TV remote is currently exposed as a joystick with its touch surface treated as two axes. Key presses are also generated when its buttons and touch surface are used.
A new hint has been added to help deal with deciding whether to background the app when the remote's menu button is pressed: SDL_HINT_APPLE_TV_CONTROLLER_UI_EVENTS.
Previously when the canvas was scaled up and the pointer was locked,
motion corresponding to less than one pixel was lost. Therefore,
slow mouse motion resulted in no motion. This fixes that.
Browsers don't have the functionality to fully support the generic
SDL_ShowMessageBox(), but this handles the likely most-common case.
Without this, you'd return immediately with a proper error result and no UI,
but probably no one checks that for SDL_ShowSimpleMessageBox. And if they
did: what would they do to handle this anyhow?
We'd need to lobby for an HTML spec of some sort that allows customizable
message boxes--that block!--to properly support SDL message boxes on
Emscripten, but this is probably Good Enough for now.
AudioQueues are available in Mac OS X 10.5 and later (and iOS 2.0 and later).
Their API is much more clear (and if you don't mind the threading tapdance
to get its own CFRunLoop) much easier to use in general for our purposes.
As an added benefit: they seemlessly deal with format conversion in ways
AudioUnits don't: for example, my MacBook Pro's built-in microphone won't
capture at 8000Hz and the AudioUnit version wouldn't resample to hide this
fact; the AudioQueue version, however, can handle this.
Generate the C protocol files from the protocol XML files installed by
wayland-protocols, and use them to implement support for relative pointer
motions and pointer locking.
Note that at the time, the protocol is unstable and may change in the future.
Any future breaking changes will, however, fail gracefully and result in no
regressions compared to before this patch.
Since we are loading shared objects dynamically, build our own version of the
core protocol symbols, so that we in the future can include protocol
extensions.
This will be used by Wayland compositors to match the application ID and
.desktop file to the SDL window(s).
Applications can set the SDL_VIDEO_WAYLAND_WMCLASS environemnt variable
early in the process to override using the binary name as a fallback.
Note that we also support the SDL_VIDEO_X11_WMCLASS in the Wayland
backend so that if a program correctly associated the desktop file with
the window under X11, only a newer SDL would be needed for it to work
under Wayland.
https://bugzilla.libsdl.org/show_bug.cgi?id=3376
Author: James Zipperer <james.zipperer@synapse.com>
Date: Sun Aug 21 01:19:19 2016 -0700
bugfix for controller / joystick add / remove being in the event queue at the same time
The repro steps were this:
1. run an sdl2 winrt/uwp app, on Win10, v10.0.10586.0 or higher
2. hide the cursor, via a call to SDL_ShowCursor(0)
3. make the Win10 game bar appear, by pressing the Windows + G hotkey
4. observe that the mouse cursor appears, in order to interact with the
game bar (this is expected behavior)
5. make the Win10 game bar disappear, either by pressing the Windows + G hotkey
again, or clicking somewhere in the app
EXPECTED RESULT: cursor disappears, as game bar disappears
ACTUAL RESULT: cursor didn't always disappear
Moved this code from winmm into core so both can use it.
DirectSound (at least on Win10) also returns truncated device names, even
though it's handed in as a string pointer and not a static-sized buffer. :/
The Windows 10 Anniversary Update (1607) breaks the method uses that SDL uses to
detect XInput devices. That is, on Windows 10 Anniversary Update, it is no longer
possible to query RAWINPUT for HID devices, and check for "IG_" in the device name.
Presumably, this will be fixed in the future.
This patch works around the issue by adding the Xbox One controller series to the
well-known device list.
This skips the more expensive RAWINPUT check for those devices, and causes them to
be detected as XInput devices once again.
Otherwise, if you had a massive, one-time queue buildup, the memory from that
remains allocated until you close the device. Also, if you are just using a
reasonable amount of space, this would previously cause you to reallocate it
over and over instead of keeping a little bit of memory around.
I think this was important for SDL 1.2 because some targets needed
special device memory for DMA buffers or locked memory buffers for use in
hardware interrupts or something, but since it just defines to SDL_malloc
and SDL_free now, I took it out for clarity's sake.
- It's now always called if device->hidden isn't NULL, even if OpenDevice()
failed halfway through. This lets implementation code not have to clean up
itself on every possible failure point; just return an error and SDL will
handle it for you.
- Implementations can assume this->hidden != NULL and not check for it.
- implementations don't have to set this->hidden = NULL when done, because
the caller is always about to free(this).
- Don't reset other fields that are in a block of memory about to be free()'d.
- Implementations all now free things like internal mix buffers last, after
closing devices and such, to guarantee they definitely aren't in use anymore
at the point of deallocation.
Turns out that libartsc isn't thread-safe, so if we run a capture and playback
device at the same time, it often crashes in arts's internal event loop.
We could throw mutexes around the read/write calls, but these are meant to
block, so one device could cause serious latency and stutter in the other.
Since this audio target isn't in high-demand (Ubuntu hasn't offered a libartsc
package for years), I'm just backing out the capture support. If someone needs
it, they can pull it out of the revision history.
(We probably never noticed because this is meant to block until it fully
writes a buffer, and would only trigger an issue if we had a short write
that wasn't otherwise an error condition.)
Sam Lantinga
David Ludwig
Ryan C. Gordon
Philipp Wiesemann
Thomas Perl
Alex Baines
Csongor Szabo
Steffen Pankratz
Ethan Lee
Eric Wing
Bill Lash
Alex Szpakowski
Magnus Bjerke Vik
Bastien Nocera
Jonathan Dowland
Brandon Schaefer
Charlie Birks
Alon Zakai
Boris Gjenero
Jukka Jyl?nki
TelpeNight
Jonas ?dahl
Mikkel Krautz