As well as reducing duplication, this lets the tests load their resources
from the SDL_GetBasePath() on platforms that support it, which is useful
if the tests are compiled along with the rest of SDL and installed below
/usr as manual tests, similar to GNOME's installed-tests convention.
Thanks to Ozkan Sezer for the OS/2 build glue.
Co-authored-by: Ozkan Sezer <sezeroz@gmail.com>
Signed-off-by: Simon McVittie <smcv@collabora.com>
Case fallthrough warnings can be suppressed using the __fallthrough__
compiler attribute. Unfortunately, not all compilers have this
attribute, or even have __has_attribute to check if they have the
__fallthrough__ attribute. [[fallthrough]] is also available in C++17
and the next C2x, but not everyone uses C++17 or C2x.
So define the SDL_FALLTHROUGH macro to deal with those problems - if we
are using C++17 or C2x, it expands to [[fallthrough]]; else if the
compiler has __has_attribute and has the __fallthrough__ attribute, then
it expands to __attribute__((__fallthrough__)); else it expands to an
empty statement, with a /* fallthrough */ comment (it's a do {} while
(0) statement, because users of this macro need to use a semicolon,
because [[fallthrough]] and __attribute__((__fallthrough__)) require a
semicolon).
Clang before Clang 10 and GCC before GCC 7 have problems with using
__attribute__ as a sole statement and warn about a "declaration not
declaring anything", so fall back to using the /* fallthrough */ comment
if we are using those older compiler versions.
Applications using SDL are also free to use this macro (because it is
defined in begin_code.h).
All existing /* fallthrough */ comments have been replaced with this
macro. Some of them were unnecessary because they were the last case in
a switch; using SDL_FALLTHROUGH in those cases would result in a compile
error on compilers that support __fallthrough__, for having a
__attribute__((__fallthrough__)) statement that didn't immediately
precede a case label.
Case fallthrough warnings can be suppressed using the __fallthrough__
compiler attribute. Unfortunately, not all compilers have this
attribute, or even have __has_attribute to check if they have the
__fallthrough__ attribute. [[fallthrough]] is also available in C++17
and the next C2x, but not everyone uses C++17 or C2x.
So define the SDL_FALLTHROUGH macro to deal with those problems - if we
are using C++17 or C2x, it expands to [[fallthrough]]; else if the
compiler has __has_attribute and has the __fallthrough__ attribute, then
it expands to __attribute__((__fallthrough__)); else it expands to an
empty statement, with a /* fallthrough */ comment (it's a do {} while
(0) statement, because users of this macro need to use a semicolon,
because [[fallthrough]] and __attribute__((__fallthrough__)) require a
semicolon).
Applications using SDL are also free to use this macro (because it is
defined in begin_code.h).
All existing /* fallthrough */ comments have been replaced with this
macro. Some of them were unnecessary because they were the last case in
a switch; using SDL_FALLTHROUGH in those cases would result in a compile
error on compilers that support __fallthrough__, for having a
__attribute__((__fallthrough__)) statement that didn't immediately
precede a case label.
If you continually poll for events it's possible that new events can come in while you're still processing the last one, delaying rendering. This is more likely with high update rate sensors.
Added support for the PS4 controller gyro and accelerometer on iOS and HIDAPI drivers
Also fixed an issue with the accelerometer on iOS having inverted axes
Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver
PS4 and PS5 controllers use AUX1 to represent the touchpad button
Nintendo Switch Pro controllers use AUX1 to represent the capture button
This driver supports the Razer Atrox Arcade Stick
Some of the quirks of this driver, inherent in Windows Gaming Input:
* There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers.
* You can't read the state of the guide button
* You can't get controller events in the background
David Ludwig
I have created a new driver for SDL's Joystick and Game-Controller subsystem: a Virtual driver. This driver allows one to create a software-based joystick, which to SDL applications will look and react like a real joystick, but whose state can be set programmatically. A primary use case for this is to help enable developers to add touch-screen joysticks to their apps.
The driver comes with a set of new, public APIs, with functions to attach and detach joysticks, set virtual-joystick state, and to determine if a joystick is a virtual-one.
Use of virtual joysticks goes as such:
1. Attach one or more virtual joysticks by calling SDL_JoystickAttachVirtual. If successful, this returns the virtual-device's joystick-index.
2. Open the virtual joysticks (using indicies returned by SDL_JoystickAttachVirtual).
3. Call any of the SDL_JoystickSetVirtual* functions when joystick-state changes. Please note that virtual-joystick state will only get applied on the next call to SDL_JoystickUpdate, or when pumping or polling for SDL events (via SDL_PumpEvents or SDL_PollEvent).
Here is a listing of the new, public APIs, at present and subject to change:
------------------------------------------------------------
/**
* Attaches a new virtual joystick.
* Returns the joystick's device index, or -1 if an error occurred.
*/
extern DECLSPEC int SDLCALL SDL_JoystickAttachVirtual(SDL_JoystickType type, int naxes, int nballs, int nbuttons, int nhats);
/**
* Detaches a virtual joystick
* Returns 0 on success, or -1 if an error occurred.
*/
extern DECLSPEC int SDLCALL SDL_JoystickDetachVirtual(int device_index);
/**
* Indicates whether or not a virtual-joystick is at a given device index.
*/
extern DECLSPEC SDL_bool SDLCALL SDL_JoystickIsVirtual(int device_index);
/**
* Set values on an opened, virtual-joystick's controls.
* Returns 0 on success, -1 on error.
*/
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualAxis(SDL_Joystick * joystick, int axis, Sint16 value);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualBall(SDL_Joystick * joystick, int ball, Sint16 xrel, Sint16 yrel);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualButton(SDL_Joystick * joystick, int button, Uint8 value);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualHat(SDL_Joystick * joystick, int hat, Uint8 value);
------------------------------------------------------------
Miscellaneous notes on the initial patch, which are also subject to change:
1. no test code is present in SDL, yet. This should, perhaps, change. Initial development was done with an ImGui-based app, which potentially is too thick for use in SDL-official. If tests are to be added, what kind of tests? Automated? Graphical?
2. virtual game controllers can be created by calling SDL_JoystickAttachVirtual with a joystick-type of SDL_JOYSTICK_TYPE_GAME_CONTROLLER, with naxes (num axes) set to SDL_CONTROLLER_AXIS_MAX, and with nbuttons (num buttons) set to SDL_CONTROLLER_BUTTON_MAX. When updating their state, values of type SDL_GameControllerAxis or SDL_GameControllerButton can be casted to an int and used for the control-index (in calls to SDL_JoystickSetVirtual* functions).
3. virtual joysticks' guids are mostly all-zeros with the exception of the last two bytes, the first of which is a 'v', to indicate that the guid is a virtual one, and the second of which is a SDL_JoystickType that has been converted into a Uint8.
4. virtual joysticks are ONLY turned into virtual game-controllers if and when their joystick-type is set to SDL_JOYSTICK_TYPE_GAMECONTROLLER. This is controlled by having SDL's default list of game-controllers have a single entry for a virtual game controller (of guid, "00000000000000000000000000007601", which is subject to the guid-encoding described above).
5. regarding having to call SDL_JoystickUpdate, either directly or indirectly via SDL_PumpEvents or SDL_PollEvents, before new virtual-joystick state becomes active (as specified via SDL_JoystickSetVirtual* function-calls), this was done to match behavior found in SDL's other joystick drivers, almost all of which will only update SDL-state during SDL_JoystickUpdate.
6. the initial patch is based off of SDL 2.0.12
7. the virtual joystick subsystem is disabled by default. It should be possible to enable it by building with SDL_JOYSTICK_VIRTUAL=1
Questions, comments, suggestions, or bug reports very welcome!
Added the functions SDL_JoystickFromPlayerIndex(), SDL_JoystickSetPlayerIndex(), SDL_GameControllerFromPlayerIndex(), and SDL_GameControllerSetPlayerIndex()
Simon McVittie
Sam Lantinga
Nate River
Ozkan Sezer
Misa
Cameron Gutman