Added the ability to specify a name and the product VID/PID for a virtual controller
Also added a test case to testgamecontroller, if you pass --virtual as a parameter
* Add changes from code review by @ccawley2011, #5597, overall cleanup
* Update N-Gage README, minor cleanup and rephrasing
* Call SDL_SetMainReady() before calling SDL_main, return SDL_main instead of main
This can be used to check whether untrusted sizes would cause overflow
when used to calculate how much memory is needed.
Signed-off-by: Simon McVittie <smcv@collabora.com>
For stable releases, this gives us the ability to make bugfix-only point
releases such as 2.24.1 if we want to, and distinguish between them
programmatically. For example, this ability could have been useful after
2.0.16 to fix Xwayland regressions, and after 2.0.18 to fix event loop
regressions.
For development releases, this gives us the ability to make multiple
prereleases during the same feature cycle, and distinguish between them
programmatically. For example, this would have been useful during 2.0.22
development, which went through three prereleases before reaching the
final release.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Now that we've said this will be removed from SDL 3, we're free to use
any encoding that is compatible with existing SDL versions and will still
compare correctly for all SDL 2 version numbers. This allows the SDL 2
minor version to go beyond 1 digit, limited only by the size of
SDL_version.minor (which is 8 bits), making the largest possible version
number 2.255.99.
The patchlevel (micro version) is still limited to 2 digits.
Signed-off-by: Simon McVittie <smcv@collabora.com>
The encoding used in SDL_VERSIONNUM (e.g. 2.0.22 -> 2022) cannot
represent 2-digit minor versions without overflowing from the hundreds
digit into the thousands digit, which produces confusing version
numbers that will compare incorrectly when the major version is increased
to 3.
However, we can sidestep this problem by declaring that SDL_VERSIONNUM
will no longer be present in SDL 3, which means it only needs to be able
to represent SDL 2 version numbers losslessly.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This comparison normally happens at compile-time, not at runtime, so
it doesn't matter if it isn't optimal. This avoids incorrect comparison
if the minor version in SDL_COMPILEDVERSION and SDL_VERSIONNUM has more
than one digit, which would cause it to overflow from the hundreds place
into the thousands place.
Signed-off-by: Simon McVittie <smcv@collabora.com>
* Add initial support for the Nokia N-Gage
* N-Gage: disable clipping for the time being, issue needs to be resolved later
* Move va_copy definition to SDL_internal.h
* Move stdlib.h include to SDL_config_ngage.h, much cleaner this way
* Remove redundant include, add HAVE_STDLIB_H
* Revert "N-Gage: disable clipping for the time being, issue needs to be resolved later"
This reverts commit 4f5f0fc36cc7f34fad05e45671dfa7b8dc32fd51.
* N-Gage: fix clipping issue by providing proper math functions
This hint allows libdecor to be used even when xdg-decoration is
available. It's mostly useful for debugging libdecor, but could in
theory be used by applications which want to (for example) bundle their
own libdecor plugins.
* Fixes for IME Composition Truncation + Addition of SDL_ClearComposition, SDL_IsTextInputShown
* Fixed: Documentation and code style issues raised during code review.
This adds support for all 3 of the gamecube controller's rumble modes
Rumble: 1
Stop: 0
StopHard: 2
This is useful for applications that need the full range of support
This also adds a hint to control rumble behavior, defaults 0 to maintain compatibility
- drop unnecessary hascapture check
- call SDL_InvalidParamError and return -1 in case the index is out of range
- do not zfill SDL_AudioSpec
- adjust documentation to reflect the behavior
- add DUMMY-define in case the subsystem is enabled but not available (filesystem/misc/locale)
- add missing PSP/VITA-filesystem defines
- sync the order of filesystems in SDL_config.h.cmake/in
- add option to disable locale subsystem in configure
- Fix SDL2main on PSP
SDL2main was not working for PSP, because it wasn't being activated and
it wasn't unsetting the main. Besides that a debug screen being started
was causing issues with joystick input and the sceKernelExitGame calli
is no longer needed with the current PSPDEV SDK.
- Clean up imports in PSP main
- Set PSP GPU and user modes in main
- Fix exit callback in PSP main
The asm has been reported broken in at least optimized Apple M1 builds;
and besides, the compiler builtins have precedence over the asm anyway.
Closes https://github.com/libsdl-org/SDL/issues/3943
- SDL_CLOCK_GETTIME now defaults to ON to match autotools build
- Add detection of float.h and Xdbe
- Fix detection of pthread_setname_np() (requires _GNU_SOURCE)
- Move SDL_USE_IME definition into SDL_config.h.cmake
Since accessing Bluetooth prompts the user for permission on both Android and iOS, and we only need it for Steam Controller support, we'll leave it off by default. You can enable it by setting the hint SDL_HINT_JOYSTICK_HIDAPI_STEAM to "1" before calling SDL_Init()
Fixes https://github.com/libsdl-org/SDL/issues/4952
Case fallthrough warnings can be suppressed using the __fallthrough__
compiler attribute. Unfortunately, not all compilers have this
attribute, or even have __has_attribute to check if they have the
__fallthrough__ attribute. [[fallthrough]] is also available in C++17
and the next C2x, but not everyone uses C++17 or C2x.
So define the SDL_FALLTHROUGH macro to deal with those problems - if we
are using C++17 or C2x, it expands to [[fallthrough]]; else if the
compiler has __has_attribute and has the __fallthrough__ attribute, then
it expands to __attribute__((__fallthrough__)); else it expands to an
empty statement, with a /* fallthrough */ comment (it's a do {} while
(0) statement, because users of this macro need to use a semicolon,
because [[fallthrough]] and __attribute__((__fallthrough__)) require a
semicolon).
Clang before Clang 10 and GCC before GCC 7 have problems with using
__attribute__ as a sole statement and warn about a "declaration not
declaring anything", so fall back to using the /* fallthrough */ comment
if we are using those older compiler versions.
Applications using SDL are also free to use this macro (because it is
defined in begin_code.h).
All existing /* fallthrough */ comments have been replaced with this
macro. Some of them were unnecessary because they were the last case in
a switch; using SDL_FALLTHROUGH in those cases would result in a compile
error on compilers that support __fallthrough__, for having a
__attribute__((__fallthrough__)) statement that didn't immediately
precede a case label.
Case fallthrough warnings can be suppressed using the __fallthrough__
compiler attribute. Unfortunately, not all compilers have this
attribute, or even have __has_attribute to check if they have the
__fallthrough__ attribute. [[fallthrough]] is also available in C++17
and the next C2x, but not everyone uses C++17 or C2x.
So define the SDL_FALLTHROUGH macro to deal with those problems - if we
are using C++17 or C2x, it expands to [[fallthrough]]; else if the
compiler has __has_attribute and has the __fallthrough__ attribute, then
it expands to __attribute__((__fallthrough__)); else it expands to an
empty statement, with a /* fallthrough */ comment (it's a do {} while
(0) statement, because users of this macro need to use a semicolon,
because [[fallthrough]] and __attribute__((__fallthrough__)) require a
semicolon).
Applications using SDL are also free to use this macro (because it is
defined in begin_code.h).
All existing /* fallthrough */ comments have been replaced with this
macro. Some of them were unnecessary because they were the last case in
a switch; using SDL_FALLTHROUGH in those cases would result in a compile
error on compilers that support __fallthrough__, for having a
__attribute__((__fallthrough__)) statement that didn't immediately
precede a case label.
* SDLTest_CommonDrawWindowInfo: log SDL_RenderGetScale, SDL_RenderGetLogicalSize
* testwm2: fix video modes menu hit detection in High DPI cases
- also when logical size is specified, e.g.
`--logical 640x480 --resizable --allow-highdpi`
* add function to determine logical coordinates of renderer point when given window point
* change since to the targeted milestone
* fix typo
* rename for consistency
* Change logical coordinate type to float, since we can render with floating point precision.
* add function to convert logical to window coordinates
* testwm2: use new SDL_RenderWindowToLogical
* SDL_render.c: alternate SDL_RenderWindowToLogical/SDL_RenderLogicalToWindow
Co-authored-by: John Blat <johnblat64@protonmail.com>
Co-authored-by: John Blat <47202511+johnblat64@users.noreply.github.com>
This API and implementation comes from the Unreal Engine branch of SDL, which
originally called this "SDL_ConfineCursor".
Some minor cleanup and changes for consistency with the rest of SDL_video, but
there are two major changes:
1. The coordinate system has been changed so that `rect` is _window_ relative
and not _screen_ relative, making it easier to implement without having
global access to the display.
2. The UE version unset all rects when passing `NULL` as a parameter for
`window`, this has been removed as it was an unused feature anyhow.
Currently this is only implemented for X, but can be supported on Wayland and
Windows at minimum too.
This prevents conflicts with hidapi linked with applications, as well as allowing applications to make use of HIDAPI on Android and other platforms that might not normally have an implementation available.
__has_include() was added in VS 2017 15.3, so this works out to essentially
the same _MSC_VER >= 1911 check we had before for MSVC but works for non-MSVC
compilers also.
The D3D11 renderer requires Direct3D 11.1 (d3d11_1.h), not Direct3D 11.0
(d3d11.h). In terms of SDKs, that's the Windows 8 SDK or later.
We should probably rename HAVE_D3D11_H...
It's marked as being a public symbol internally, however, it was missing from the header files and not visible in the shared library. This adds it to the necessary headers and to the DynAPI list to expose it for use by applications.
Co-authored-by: Frank Praznik <frank.praznik@oh.rr.com>
Note that this removes the timeGetTime() fallback on Windows; it is a
32-bit counter and SDL2 should never choose to use it, as it only is needed
if QueryPerformanceCounter() isn't available, and QPC is _always_ available
on Windows XP and later.
OS/2 has a similar situation, but since it isn't clear to me that similar
promises can be made about DosTmrQueryTime() even in modern times, I decided
to leave the fallback in, with some heroic measures added to try to provide a
true 64-bit tick counter despite the 49-day wraparound. That approach can
migrate to Windows too, if we discover some truly broken install that doesn't
have QPC and still depends on timeGetTime().
Fixes#4870.
SDL_config.h *can* define SDL_JOYSTICK_WGI. On builds with the Windows
10 SDK available, this allow implementing trigger rumbling on Xbox One
controllers. The files included in the Visual Studio Solution in
VisualC\SDL.sln *do* have this define set.
fix#4859
* Avoid unnecessary SDL_PumpEvents calls in SDL_WaitEventTimeout
* Add a sentinel event to avoid infinite poll loops
* Move SDL_POLLSENTINEL to new internal event category
* Tweak documentation to indicate SDL_PumpEvents isn't always called
* Avoid shadowing event variable
* Ignore poll sentinel if more (user) events have been added after
Co-authored-by: Sam Lantinga <slouken@libsdl.org>
SDL Wiki Bot
Sam Lantinga
David Carlier
Simon McVittie
Cameron Cawley
Ozkan Sezer
Ivan Epifanov
Sylvain
Michael Fitzmayer
Alex Szpakowski
atfrase
Susko3
Ryan C. Gordon
meyraud705
Eddy Jansson
Ethan Lee
David Gow
Connor Clark
Jaylon Gowie
Cameron Gutman
Zach Reedy
Phillip Stephens
Francisco Javier Trujillo Mata
pionere
ulatekh
Wouter Wijsman
hgs3
Misa
Eric Wasylishen
Patrick Hogan
Kevin Colour
Frank Praznik
Ybalrid (Arthur Brainville)
Cacodemon345
Brick