PipelineLayout was re-entering in NXT to create the default empty BGLs,
but forgot to remove the initial external refcount for them.
Fixing this showed an issue where it was impossible to externally
reference a RefCounted that had only internal references, fix this as
well and add a test.
When a BGL was first created in the cache, it started with an external
refcount of 1 and we then referenced again in
BindGroupLayoutBuilder::GetResultImpl, causing a leak.
Fix this by referencing in the cache lookup only if the BGL already
exists.
Don't assert on color formats which can be cleared with a
floating-point clear value.
So far, these are { unorm } x { r, rg, rgba, bgra }.
Fix linter error when no files to check.
The indexOffset of the draw was not being used. It must be
included in the indexBufferOffset.
Renamed indexBufferOffset -> indexBufferBaseOffset.
Add a DrawElements test which exercises zero and non-zero index offsets.
Backend support implemented in GL, Metal and D3D12.
Support for unorm values in the GL backend requires a
utility function to indicate if the format's components
are normalized.
Note that unorm_r8 is only supported on more recent MacOS SDKs (10.13),
so it's omitted for now.
When calling unmap on a mapped buffer for which the callback hasn't
fired yet, the callback should be called with UNKNOWN. The code marked
the callback as called only after calling it, causing problems with
re-entrancy where the callback would be called twice.
This could also get triggered by destroying the buffer inside the
callback.
Fix this in backend::Buffer and the WireClient and add test for both.
Previously we would remove the reference to pipelines in the destructor
of the d3d12::*Pipeline objects which could cause the D3D12 pipeline
state to be destroyed while still used by in-flight commands. Add a
global queue of ComPtrs to keep alive in the d3d12::Device to fix this.
We want all of NXT to have the origin in the top left. OpenGL's origin
is the bottom left instead. We are doing a blit already to decouple
the NXT render targets from the OpenGL default framebuffer. Take
advantage of this and invert the blit to make the OpenGL's backend
origin be top left.
PRESENT is an exclusive flag in NXT and can't be combined with other flags. The existing implementation treats the D3D12_RESOURCE_STATE_PRESENT as flag which is confusing due to being 0.
The Swapchain::Configure was changed to not require an initial usage
anymore. Previously the code was doing a transition to this usage
causing the code to now transition to <uninitialized data> usage.
Fix this by deleting code. Also make TextureD3D12 responsible for the
transition to PRESENT.
Making all textures represented by pointers is a problem for Vulkan
where VkImage is a 64bit type and wouldn't fit in a pointer on 32bit
builds. Make texture contain on of each useful type so that each backend
can choose which one it wants to receive.
This file changes the non-dispatchable Vulkan handle types. We want to
use some of these handles in utils/VulkanSwapChain.cpp so it needs to
have access to it. The file could include
backend/vulkan/vulkan_platform.h but it seems a bit cleaner to move the
header in common/ instead with a warning if the Vulkan backend isn't
enabled.
For the Vulkan backend it will make sense to have the SwapChain be
implemented inside the backend as it will need to interact with a lot of
things there. It will need SwapChainImpl and cannot see utils/ so
SwapChainImpl has to be moved in common/
Also makes SwapChainImpl a function called CreateSwapChainImplementation
as the inheritance was only used to share a static method.
In Vulkan images are created in no particular layout and must be
transitioned before they can be used. This didn't appear before because
the test were creating the textures with not initial usage and then
transitioned them. This isn't the case with InputStateTest, which is
what uncovered this issue.
There was a lot of missing around with viewports and flip the Y
coordinate in vertex shaders before. Turns out things are simpler than
we thought: *all* APIs have gl_Position(-1, -1) map to texel (0, 0). It
is just the present coordinate system that changes.
Remove some of the hacks we had to work around non-existent viewport
issues and fix tests.
Sometimes NXT provides default objects for parts of the pipelines, for
example a default pipeline layout. This objects were create with code
like: device->CreateFooBuilder()->GetResult(); and stored in a Ref<>.
This caused the object to have on external reference and two internal
references and not get destroyed when the Ref<> goes out. Call Release
on these objects to remove the external reference and fix the leak.
Was found via the Vulkan validation layers that were complaining that a
VkPipelineLayout was leaked.
This as this is the first command handled by the Vulkan backend, this
commit also introduces the b:✌️:CommandBUffer class and implements
b:✌️:Queue::Submit.
Also enables the BufferSetSubData tests that are now passing on Vulkan
even though the buffer transitions are unimplemented.
This introduce a new FencedDeleter service as part of the Device
objects that tracks when resources are no longer used and deletes them.
BufferVk takes advantage of this to defer the deletion of its handle
that was previously incorrectly delete directly in ~BufferVk.
On 32 bit Vulkan typedefs these handles to uint64_t which breaks
function overload resolution. Replace the
VK_DEFINE_NON_DISPATCHABLE_HANDLE and VK_NULL_HANDLE defines to be
opaque C++ types with the same capabilities.
Previously we would modify the GL state as soon as we saw
SetIndex/VertexBuffers. This GL state is owned by the VAOs in the
InputState and was disappearing on a Pipeline change. Fix this by
applying the index / vertex buffers lazily.
This was because the clip space of OpenGL has an inverted Y compared to
other APIs. This commit:
- Updates SPIRV-Cross to the latest version
- Uses the new vertex.flip_vert_y option in ShaderModuleGL
- Enables tests that are now passing in GL.
Explicitly configure swap chain usage in bindings and examples
Fix missing case in switch
Make swap chain Present usage implicit
Author: Austin Eng <enga@google.com>
This is to avoid a potential future problem if SetPipelineCommon were to
ever return false (which is currently not possible), some state might
have been modified incorrectly.
Previously didn't tell SPIRV-Cross at which MSL resource indices the
different SPIRV binding should be, and were lucky that it's giving
indices in increasing order matched the PipelineLayout in all our
samples.
Fix this by making SPIRV->MSL compilation depend on the PipelineLayout
so we can tell SPIRV-Cross which binding goes where.
We should do the same for vertex attributes eventually as they are
hardcoded to start at kMaxBindingsPerGroup currently.
Also a couple unrelated cleanups (unused function, usage of
IterateBitSet).
* clang/gcc: enable -pedantic warnings
* suppress a GCC-specific warning in stb_image
* And some clang-specific warnings
* -Wconversion (clang) -Wold-style-cast (clang+gcc)
and fix a few warnings that show up with these (and a few more with
-Wconversion on gcc, even though that's not enabled by default)
* bunch more warnings
* fixes
* remove merge error
Adds the swap chain interfaces to the API without changing the behavior
of anything else. This includes the C APIs for applications to provide
swap chain implementations. Also adds stub implementations on every
backend.
The test doing many small SetSubData freezes the Metal driver on a
MTLBuffer allocation. This is because we don't use a ringbuffer for
SetSubData and instead create one small upload buffer per call.
The same test is skipped on D3D12 as it is bound to have the same issue.
Also adds comments that were forgotten before every MapReadAsync test.
RenderDoc uses presents as the points to start and end a capture, so to
debug test we have to do the following:
TEST_F(...)
while(true) {
// All the test code
SwapBuffers();
}
}
Implements BeginRenderSubpass on the D3D12 backend. Descriptors for render target and depth stencil views are recorded in a descriptor heap for each framebuffer. For now, we still have the hack where no attachment renders to the backbuffer, so the CommandBuffer records those when necessary when it is submitted.
This PR also enables input states for D3D12 which are mostly working. One failure seems to be happening because our texture copies are not yet correct.
Probably not the most efficient implementation, but works.
Issues:
* Doesn't seem to render until the second frame. No clue why, yet.
* Hardcoded 640x480 in more places.
* Creates new FBOs for every subpass every frame. Should be done at Framebuffer build or CommandBuffer build time.
This helps Visual Studio users have less clutter in their solution
explorer. This also updates spirv-tools to a newer version that folders
itself. This also updates spirv-headers so that spirv-tools compiles.
This macro has some advantages over the standard library one:
- It prints the place where the macro was triggered
- It "references" the condition even in Release to avoid warnings
- In release, if possible, it gives compiler hints
It is basically is stripped down version of the ASSERT macros I wrote
for the Daemon engine in src/common/Assert.h
This commit also removes the stray "backend" namespaces for common/
code.
This directory used to contain both the state tracking code for the
backends, and the common utilities that could be used both by the
backends and the rest of the code. Things are now:
- src/common is utility code for the whole repo
- src/backend contains libNXT's code
- src/utils is utility code that we don't want in libNXT
This commit also changes all includes to use global paths from src/
bacause it had to touch a bunch of #include statements anyway.
Buffers with MapRead allowed are created on the READBACK heap and always
add the D3D12_RESOURCE_STATE_COPY_DEST state (required by D3D12).
Likewise MapWrite adds the D3D12_RESOURCE_STATE_GENERIC_READ state and
places resources on the UPLOAD heap. Because these states are
required, transitions for mapped buffers do nothing.
This makes rendering of the samples have the wrong colors on the Metal
backend, but using BGRA made end2end tests fail. The rendering color
will be fixed when the WSI is introduced.
Extract descriptor offset computation and CPU descriptor recording to
BindGroupLayout and BindGroup. Refactor descriptor heap allocation to
copy from a large CPU heap to a GPU heap.
Previously the Metal backend used a manual mutex system to make sure the
BufferSetSubData didn't have data races with reads from the GPU. Replace
this with a non-hacky version
- Make the Buffer objects allocated on the GPU
- Make SetSubData use a ResourceUploader that allocates a CPU buffer
and schedules a CPU->GPU copy.
- Have a list of pending commands and a finished command serial to
order operations and track when resource become unused.
No functional changes intended, but there are a couple additional
cleanups:
- Use anonymous namespaces instead of static functions
- Don't store an extra Device pointer in objects
Unfortunately you can't template on const-ness in C++ so we have to
duplicate all the iterator code for SerialQueue (that, or introduce very
heavy templating).
This also expands the Buffer validation tests to cover more creation
code paths and SetSubData. It also introduces a mechanism for
ValidationTests to check for device errors.
We want to test BufferMapRead validation using the null backend. To get
closer to conditions on a real backend, we call the callback only on the
next Queue::Submit. This is because on real backends, we would have to
wait for the GPU to be finished with the buffer, to be sure the correct
data is read.
- defaults to depth and stencil tests off
- whether or not depth and stencil tests are enabled is inferred from the comparison functions and stencil operations
- only one stencil reference. D3D12 does not support separate references
- change SetDepthWriteMode to SetDepthWriteEnabled and use a bool instead of enum
- Create PersistentPipelineState class for OpenGL backend with simple state tracking
- Add validation so DepthStencilState properties are only set once
- Update API usage in HelloDepthStencil
- refactor tracking of the DepthStencilState in the Metal backend
- validate that compute pipeline does not have a depth stencil state
Add depth and stencil tests. This is currently only implemented for the
OpenGL API. HelloDepthStencil is a test using the depth and stencil
buffers to do reflections. Currently clearing / stencil clearing is not
working properly.
Previously WireCmd.h/cpp that is used in wire_autogen wasn't included in
the sources, causing a link error on some platforms.
With WireCmd.* moved in the EXTRA_SOURCES, the nxt_wire target didn't
contain any non-header file and caused a link error on OSX. Fix it by
properly splitting the declaration and implementation of
TerribleCommandBuffer in a .h and .cpp file.
This makes sure it works correctly with the ScanForward Math type.
However this isn't a very good fix, the right solution would be to
detect whether we are compiling in 32bit or 64bit and use one of
ScanForward32 or ScanForward64.
For shared library to work on Windows to work, we need to add
declspec(export) and declspec(import) annotations to the symbols to
export. This fixes the problem by making all libraries static on
Windows, but we'll need to revisit and do proper symbol exports.
Validation tests are tests of the backend state-tracking and validation
code that don't require a GPU as they are running on the null backend.
This commit adds a very simple (and almost useless) BufferValidationTest
as an example of a validation test.
* First API design (many features missing, including input attachments)
* Metal implementation (no OpenGL yet)
* Render-to-texture demo (a little broken until we have depth buffers)
* Update examples to use render passes
- Add test for passing value arguments as well as aarrays of them
- Add test for passing C string
- Rework Object array argument test to pass multiple objects
This adds support for "natively defined" API types like callbacks that
will have to be implemented manually for each target language. Also this
splits the concept of "native method" into a set of native methods per
language.
Removes the "Synchronous error" concept that was used to make builders
work in the maybe Monad, this will have to be reinroduced with builder
callbacks.
Corentin Wallez
Stephen White
Corentin Wallez
Stephen White
msiglreith
Kai Ninomiya
Kai Ninomiya
Austin Eng
Ben Constable
Austin Eng