libdecor_dispatch() needs to be called, as libdecor plugins might do some required internal processing within, however care must be taken to avoid double-blocking in the case of a timeout, which can occur if libdecor_dispatch() and the SDL event processing both work on the main Wayland queue. Additionally, assumptions that libdecor will always dispatch the main queue or not process zero-length queues (can occur if a wait is interrupted by the application queueing an event) should not be made, as this behavior is outside the control of SDL and can change.
SDL handles polling for Wayland events and then calls libdecor to do its internal processing and dispatch. If libdecor operates on the main queue, it will dispatch the queued events and the additional wl_display_dispatch_pending() call will be a NOP. If a libdecor plugin uses its own, separate queue, then the wl_display_dispatch_pending() call will ensure that the main queue is always dispatched.
Fixes battery level dropping to empty with the Qanba Drone Arcade Stick.
It looks like we might also be able to skip the check for all third party controllers, but I think this is the right thing to do for Sony controllers as well.
In all cases they were using SDL_SCANCODE_TABLE_XFREE86_2 with some keycodes remapped or fewer than expected keycodes. This adds a sanity check that catches all of them and gives them the right scancode table.
If we can't find the X11 keysym, it's likely that either the keysym is NoSymbol, in which case we won't hit it anyway, or it's been mapped to a character, in which case the existing mapping is correct for the scancode and the character will be reflected in the keycode mapping.
* Consolidated scancode mapping tables into a single location for all backends
* Verified that the xfree86_scancode_table2 is largely identical to the Linux scancode table
* Updated the Linux scancode table with the latest kernel keycodes (still unmapped)
* Route X11 keysym -> scancode mapping through the linux scancode table (which a few hand-written exceptions), which will allow mappings to automatically get picked up as they are added in the Linux scancode table
* Disabled verbose reporting of missing keysym mappings, we have enough data for now
The original code mapped incorrectly from [min, max] to [-32768, 32512], the upper bound being SDL_JOYSTICK_AXIS_MAX - 255 instead of SDL_JOYSTICK_AXIS_MAX.
This will only log things going through dynapi, which means it won't
do anything if dynapi is disabled for a given build, but also things
that call the `*_REAL` version of an API won't log either (which is
to say, if an internal piece of SDL calls a public API, it won't log
it, but if an application calls that same entry point, it will).
Since this just inserts a different function pointer, unless you
explicitly request this at runtime, it won't add any overhead, and,
of course, the entire thing can be turned off with a single #define
so it doesn't even add extra unused code to the shared library if
the kill switch is flipped.
These were needed to fix some buggy behavior regarding committing old buffer sizes when entering fullscreen that has since been corrected. Remove them.
If the compositor is entering fullscreen and hasn't removed any constraints itself, it's already too late at this point. Remove the unnecessary call.
Restoring the limits when exiting fullscreen is still required, though, as they may have been removed when entering fullscreen via an SDL request.
Caches the SDL_HINT_VIDEO_EGL_ALLOW_TRANSPARENCY hint at init time and registers a callback, which is fired when the hint is changed during runtime and toggles the opaque region for existing surfaces.
The preferred method for setting the damage region on compositor protocol versions 4 and above is to use wl_surface.damage_buffer. Use this when available and only fall back to wl_surface.damage on older versions.
Bumps the highest supported version of wl_compositor to version 4.
Adds deduplication logic to ConfigureWindowGeometry() to avoid setting redundant backbuffer, viewport and surface opaque region dimensions. State is now only set when the window and/or backbuffer dimensions change.
This repurposes the viewport rect to always hold the actual size of the window, which can differ from the SDL size if things are being scaled. The SDL_Rect was removed in favor of two ints, as the x/y members of the struct were never used, so they just wasted space.
Since the internal variables always have the true window size, the width/height getter functions are no longer required and can be removed.
Several games (including Source and GoldSrc games, and Bioshock
Infinite) attempt to "fake" relative mouse mode by repeatedly warping
the cursor to the centre of the screen. Since mouse warping is not
supported under Wayland, the viewport ends up "stuck" in a rectangular
area.
Detect this case (mouse warp while the cursor is not visible), and
enable relative mouse mode, which tracks the cursor position
independently, and so can Warp successfully.
This is behind the SDL_HINT_VIDEO_WAYLAND_EMULATE_MOUSE_WARP hint, which
is enabled by default, unless the application enables relative mouse
mode itself using SDL_SetRelativeMouseMode(SDL_TRUE).
Note that there is a behavoural difference, in that relative mouse mode
typically doesn't take mouse accelleration into account, but the
repeated-warping technique does, so mouse movement can seem very slow
with this (unless the game has its own mouse accelleration option, such
as in Portal 2).
Make sure the SDL java and C code match when updating SDL in a game.
Right now we're assuming that we only have to make sure release versions match. We can extend the version string with an interface version if we need more fine grained sanity checking.
Fixes https://github.com/libsdl-org/SDL/issues/1540
This is the only case where the mapping differs between right and left Joy-Cons in mini-gamepad mode. The left Joy-Con will have the left paddles and the right Joy-Con will have the right paddles. This facilitates co-op gameplay with individual actions while still using the normal mini-gamepad mode.
The paddles are used for this because conceptually they are more awkward to hit than the normal controls and they are in roughly the correct hand position.
* Added support for vertical mode for Joy-Con controllers
* Added the hint SDL_HINT_JOYSTICK_HIDAPI_VERTICAL_JOY_CONS for switching to this mode
* Added support for SL/SR buttons in combined/vertical mode and L/ZL/R/ZR buttons in mini-gamepad mode
Calling SDL_HideWindow() to destroy the window is a NOP if the SDL_WINDOW_SHOWN flag was never set. Bypass it and call the Wayland-specific function directly to ensure that the window is always destroyed before switching from server-side to client-side decorations, even if it hasn't been shown yet.
Likewise, call Wayland_ShowWindow() directly when the window isn't explicitly hidden to ensure that it is always recreated since the SDL_WINDOW_SHOWN flag won't be cleared, which, when set, renders SDL_ShowWindow() a NOP.
Before calling any D-Bus related methods we should first ensure that
they
were correctly loaded.
In the event where `LoadDBUSLibrary()` was not able to load the D-Bus
library, we should just return early, signalling with SDL_FALSE that we
were unable to inhibit the Screensaver.
Helps: https://github.com/ValveSoftware/steam-for-linux/issues/8815
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
ad874536 removed an unnecessary limit as we *can* have a devindex
greater than 99, this error message does not reflect the support for
values greater than 99.
If a Nintendo Switch Pro controller is turned off, it will leave the controller connected in Windows, but not responding to reports. Don't wait a really long time trying to get information from a controller in this state.
On Windows, the Bluetooth device can remain in a connected state if the controller just shut down. It won't return any errors, but it also won't generate any input reports in this state, so wait until we know for sure that the Bluetooth controller is sending data before letting the application know it's available.
Nintendo Switch controllers will automatically turn off Bluetooth when connected over USB, but this takes care of that a little more quickly.
PS4 and PS5 controllers will happily send reports over both Bluetooth and USB, so we'll prefer USB if connected and switch back to Bluetooth if USB is disconnected.
The text component of a repeated keystroke is initially set when a key is first pressed and the cached value remains static until the repeated key is released and another repeatable key is pressed. If the state of a modifier such as shift or capslock is changed while a key is being repeated, the text emitted will not have the modifier applied to it until the repeated key is released and pressed again.
Update the text to be repeated by a key if a modifier is changed while a key is actively being repeated.
The XKB keysym to SDL keycode mappings were missing for the Escape and NumLock keys, which prevented them from being remapped. Add them to the table so that the remapping of these keys will work.
Note that returning SDL_PIXELFORMAT_BGR24 instead of SDL_PIXELFORMAT_RGB24 seems necessary, otherwise when running with SDL_ACCELERATION=0, the red and blue channels of the window appeared swapped.
Note that when running with acceleration enabled, red and blue channel swapping does not happen regardless of whether SDL_PIXEL_FORMAT_RGB24 or SDL_PIXEL_FORMAT_BGR24 is returned.
For good measure, I also tested running with acceleration disabled in both 15 and 16 bit color depths, but red and blue channel swapping did not occur
This prevents a number of issues where devices are enumerated but not actually able to be opened, like https://github.com/libsdl-org/SDL/issues/5781.
We currently leave the devices open, allowing us to more easily do controller feature detection, protocol negotiation, detect dropped Bluetooth connections, etc. with the expectation that the application is likely to open the controllers shortly.
If multiple keys were simultaneously depressed and one was being repeated, the repeat flag was being cleared when any of the pressed keys were released, even if the released key wasn't the one being repeated.
This tracks the key currently being repeated and only clears the repeat flag when the particular key being repeated is released.
Silences clang -Wpragma warnings:
D:/a/SDL/SDL/src/video/windows/SDL_windowstaskdialog.h:21:10: warning: the current #pragma pack alignment value is modified in the included file [-Wpragma-pack]
#include <pshpack1.h>
^
D:/a/_temp/msys64/clang64/include/pshpack1.h:7:9: note: previous '#pragma pack' directive that modifies alignment is here
#pragma pack(push,1)
^
In file included from D:/a/SDL/SDL/src/video/windows/SDL_windowsmessagebox.c:35:
D:/a/SDL/SDL/src/video/windows/SDL_windowstaskdialog.h:156:10: warning: the current #pragma pack alignment value is modified in the included file [-Wpragma-pack]
#include <poppack.h>
^
note: previous '#pragma pack' directive that modifies alignment is here
2 warnings generated.
Closes: https://github.com/libsdl-org/SDL/issues/6240
Unfortunately the only way to detect this is to actually try opening a device, so we wait until the application tries, and then stop enumerating afterwards.
Fixes https://github.com/libsdl-org/SDL/issues/5781
This kicks in if the platform doesn't support vsync directly, or if the present fails for some reason (e.g. minimized on some platforms)
Fixes https://github.com/libsdl-org/SDL/issues/5134
X11 has a so-called primary selection, which you can use by marking text and middle-clicking elsewhere to copy the marked text.
There are 3 new API functions in `SDL_clipboard.h`, which work exactly like their clipboard equivalents.
## Test Instructions
* Run the tests (just a copy of the clipboard tests): `$ ./test/testautomation --filter Clipboard`
* Build and run this small application:
<details>
```C
#include <SDL.h>
#include <unistd.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
void print_error(const char *where)
{
const char *errstr = SDL_GetError();
if (errstr == NULL || errstr[0] == '\0')
return;
fprintf(stderr, "SDL Error after '%s': %s\n", where, errstr);
SDL_ClearError();
}
int main()
{
char text_buf[256];
srand(time(NULL));
SDL_Init(SDL_INIT_VIDEO);
print_error("SDL_INIT()");
SDL_Window *window = SDL_CreateWindow("Primary Selection Test", SDL_WINDOWPOS_UNDEFINED,
SDL_WINDOWPOS_UNDEFINED, 400, 400, SDL_WINDOW_SHOWN);
print_error("SDL_CreateWindow()");
SDL_Renderer *renderer = SDL_CreateRenderer(window, -1, SDL_RENDERER_ACCELERATED);
print_error("SDL_CreateRenderer()");
bool quit = false;
unsigned int do_render = 0;
while (!quit) {
SDL_Event event;
while (SDL_PollEvent(&event)) {
print_error("SDL_PollEvent()");
switch (event.type) {
case SDL_QUIT: {
quit = true;
break;
} case SDL_KEYDOWN: {
switch (event.key.keysym.sym) {
case SDLK_ESCAPE:
case SDLK_q:
quit = true;
break;
case SDLK_c:
snprintf(text_buf, sizeof(text_buf), "foo%d", rand());
SDL_SetClipboardText(text_buf);
print_error("SDL_SetClipboardText()");
printf("clipboard: set_to=\"%s\"\n", text_buf);
break;
case SDLK_v: {
printf("clipboard: has=%d, ", SDL_HasClipboardText());
print_error("SDL_HasClipboardText()");
char *text = SDL_GetClipboardText();
print_error("SDL_GetClipboardText()");
printf("text=\"%s\"\n", text);
SDL_free(text);
break;
} case SDLK_d:
snprintf(text_buf, sizeof(text_buf), "bar%d", rand());
SDL_SetPrimarySelectionText(text_buf);
print_error("SDL_SetPrimarySelectionText()");
printf("primselec: set_to=\"%s\"\n", text_buf);
break;
case SDLK_f: {
printf("primselec: has=%d, ", SDL_HasPrimarySelectionText());
print_error("SDL_HasPrimarySelectionText()");
char *text = SDL_GetPrimarySelectionText();
print_error("SDL_GetPrimarySelectionText()");
printf("text=\"%s\"\n", text);
SDL_free(text);
break;
} default:
break;
}
break;
} default: {
break;
}}
}
// create less noise with WAYLAND_DEBUG=1
if (do_render == 0) {
SDL_RenderPresent(renderer);
print_error("SDL_RenderPresent()");
}
do_render += 1;
usleep(12000);
}
SDL_DestroyRenderer(renderer);
SDL_DestroyWindow(window);
SDL_Quit();
print_error("quit");
return 0;
}
```
</details>
* Use c,v,d,f to get and set the clipboard and primary selection.
* Mark text and middle-click also in other applications.
* For wayland under x:
* `$ mutter --wayland --no-x11 --nested`
* `$ XDG_SESSION_TYPE=wayland SDL_VIDEODRIVER=wayland ./<path_to_test_appl_binary>`
Clip rectangle set to int(left+width/2) , int(top+height/2) , int(left+width/2)+1 , int(top+height/2)+1
a 1x1 box
On even-valued resolution, cursor is stable at bottom-right central pixel
On odd-valued resolution, cursor is stable at exact central pixel.
this is the desired behaviour
In some cases, a backbuffer size update may not be accompanied by a resize event if the window size and/or scale were updated before the new backbuffer size was recomputed. Instead of the scale, use the old/new backbuffer sizes to determine if a resize event is required so that a backbuffer size change will always be followed by a resize event.
Sam Lantinga
happyharryh
Frank Praznik
Cameron Gutman
Pierre Wendling
Ryan C. Gordon
Sylvain
Desour
Ethan Lee
zhailiangliang
Guldoman
Anonymous Maarten
Nicolas Cian
slime
Andrey Filipenkov
daniel
David Gow
Happy Harry
Aaron Barany
Sam Clegg
Jarod Hillman
zll
Ozkan Sezer
Ludovico de Nittis
Eric Curtin
UnknownShadow200
past-due
Ivan Epifanov
Cameron Cawley
xeonmc