- SDL_JoystickGUID -> SDL_GUID (though we retain a type alias)
- Operations for GUID <-> String ops are now in
src/SDL_guid.c and include/SDL_guid.h
- The corresponding Joystick operations delegate to SDL_guid.c
- Added test/testguid.c
As of #5703, we call libdecor_dispatch() in Wayland_WaitEventTimeout(),
but this will crash if we don't load libdecor, as
SDL_VideoData::shell.libdecor will be NULL.
Since we don't load libdecor if we don't intend to use it (i.e., if
should_use_libdecor returns false), this results in a crash under KDE in
almost all circumstances.
The MinGW-64 header defines the parameters as ABI::Windows::Foundation::IReference<INT32 > **, but the Windows header defines the parameters as __FIReference_1_int**
Since #5602, SDL is intended to have the same ABI across the whole
major-version 2 cycle, so we should not check that the minor version
matches the one that was used to compile an application.
There are two checks that could make sense here.
The first check is that the major version matches the expected major
version. This is usually unnecessary and is not usually done (if we're
calling into the wrong library we'll likely crash anyway), but since we
have the information, we might as well continue to use it.
The second check is whether the version provided by the caller is
equal to or greater than a threshold version at which additional fields
were added to the struct. If it is, we should populate those fields;
if it is not, then we cannot. This is only useful on platforms where
additional fields have genuinely been added during the lifetime of
SDL 2, like Windows and DirectFB (but not X11).
This commit changes the first check to be consistent about only looking
at the minor version, while leaving the second check using SDL_VERSIONNUM
(which will be removed or widened in SDL 3, but it's fine for now).
Resolves: https://github.com/libsdl-org/SDL/issues/5711
Fixes: cd7c2f1 "Switch versioning scheme to be the same as GLib and Flatpak"
Signed-off-by: Simon McVittie <smcv@collabora.com>
Otherwise we ignore the Configure/etc events when they come in because
the window is already in an identical state as far as SDL is concerned.
Fixes#5593.
May also fix:
Issue #5572.
Issue #5595.
This reverts commit 3fcc2cb500.
Button4 and Button5 are for the scrollwheel, not the extended buttons.
I don't know of a way to query the state of the extended buttons using X11.
These try to pull from the .pdf files that are installed with
macOS, which fit our needs better, and fall back to the most
reasonable defaults available from NSCursor if we can't load
them.
Since these are installed under /System, they should be sandbox
accessible, and if this totally fails, it should still go on,
albeit with a less good cursor.
Reference Issue #2123.
On Gnome (and hopefully others!), this produces something that actually
matches SDL_SYSTEM_CURSOR_SIZENWSE/SDL_SYSTEM_CURSOR_SIZENESW. On
other desktop enviroments, it probably fits the spirit better than
XC_fleur in any case.
Reference Issue #2123.
Added the ability to specify a name and the product VID/PID for a virtual controller
Also added a test case to testgamecontroller, if you pass --virtual as a parameter
Don't be fooled by the diff size - this ended up being a big refactor of the
shell surface management, masked only by some helper macros I wrote for the
popup support.
This change makes it so when xdg_decoration is supported, but CSD is requested,
the system bails on xdg support entirely and resets all the windows to use
libdecor instead. This transition isn't pretty, but once it's done it will be
smooth if decorations are an OS toggle since libdecor will take things from
there.
In hindsight, we really should have designed libdecor to be passed a toplevel,
having it manage that for us keeps causing major refactors for _every_ change.
Move rendering of the assert message into a separate
function so we can remove the ugly loop construction.
Changes the logic such that allocation failure no longer
immediately returns SDL_ASSERTION_ABORT, instead we
fall back to the truncated message.
If an error is indicated from SDL_snprintf, then we do
abort with SDL_ASSERTION_ABORT.
* Add changes from code review by @ccawley2011, #5597, overall cleanup
* Update N-Gage README, minor cleanup and rephrasing
* Call SDL_SetMainReady() before calling SDL_main, return SDL_main instead of main
Change Cocoa SDL_VideoData and SDL_WindowData implementations from C structs to Objective-C objects, since bridging between C and ObjC is easier that way.
If the size to be allocated is very large and untrusted, then adding
the padding etc. might be enough to cause unsigned overflow, after
which a very small amount of memory will be allocated.
Signed-off-by: Simon McVittie <smcv@collabora.com>
If we're strict about applying something resembling semantic versioning
to the "marketing" version number, then we can mechanically generate
the ABI version from it.
This limits the range of valid micro versions (patchlevels) to 0-99.
Signed-off-by: Simon McVittie <smcv@collabora.com>
For stable releases, this gives us the ability to make bugfix-only point
releases such as 2.24.1 if we want to, and distinguish between them
programmatically. For example, this ability could have been useful after
2.0.16 to fix Xwayland regressions, and after 2.0.18 to fix event loop
regressions.
For development releases, this gives us the ability to make multiple
prereleases during the same feature cycle, and distinguish between them
programmatically. For example, this would have been useful during 2.0.22
development, which went through three prereleases before reaching the
final release.
Signed-off-by: Simon McVittie <smcv@collabora.com>
* Add initial support for the Nokia N-Gage
* N-Gage: disable clipping for the time being, issue needs to be resolved later
* Move va_copy definition to SDL_internal.h
* Move stdlib.h include to SDL_config_ngage.h, much cleaner this way
* Remove redundant include, add HAVE_STDLIB_H
* Revert "N-Gage: disable clipping for the time being, issue needs to be resolved later"
This reverts commit 4f5f0fc36cc7f34fad05e45671dfa7b8dc32fd51.
* N-Gage: fix clipping issue by providing proper math functions
Enabling GCController.shouldMonitorBackgroundEvents to read background events
for MFi controllers before receiving the first GCControllerDidConnectNotification
is apparently a no-go on macOS (12.3.1 for me), and would crash on attempt.
Apple's documentation is... not great, and doesn't point this out.
This waits for IOS_AddMFIJoystickDevice() to get called down the chain from GCControllerDidConnectNotification, and enables GCController.shouldMonitorBackgroundEvents
if it hadn't been already.
On iOS and tvOS, GCController.shouldMonitorBackgroundEvents is ignored, so
there's no need to check their versions.
Ensure that we're not trying to call SDL_small_alloc()
with a count of zero.
Transforming the code like this fixes a
-Wmaybe-uninitialized warning from GCC 12.0.1
For short messages, use a stack buffer that is
significantly smaller than SDL_MAX_LOG_MESSAGE.
The rationale for this is that we don't want to risk
blowing the stack, while at the same time we would
like to not put pressure on the memory allocator unless
absolutely necessary.
This is the one that splits the "left wing" into two for loops to
bubble out the conditional that decides if it should read from the
left padding or the input buffer.
I still believe the optimization is good, but the basic logic of it
was incorrect, and needs to be reexamined and fixed before going
back into revision control.
We can get _some_ of the info we need out of standard Xlib and report a
single display (which might actually be multiple physical displays mushed
into a single desktop). This is better than nothing, but you should really
just build with XRandR support and get a better X server. :)
- Calculate `j * RESAMPLER_SAMPLES_PER_ZERO_CROSSING` once per loop
iteration since we use it multiple times.
- Do the left-wing loop in two sections: while `srcframe < 0` and then
the remaining calculations when `srcframe >= 0`. This bubbles a conditional
out of every iteration of a tight loop, giving us a boost. We could
_probably_ do this to the right-wing loop too, but it's less straightforward
there.
- The real win: Use floats instead of doubles. This almost doubles the speed
of the entire function on Intel CPUs, and for embedded things without
hardware-level support for doubles, the speedup is enormous. This in
theory might reduce audio quality, though, and I had to put a check in
place to avoid a division-by-zero that we avoided at higher precision, but
this is likely to be worth keeping for at least the Sony PSP and other
smaller platforms, if not everyone.
Instead of waiting until the entire buffer from the SDL callback is ready
to be accepted by PulseAudio, we use pa_stream_set_write_callback and
feed some portion of the buffer as callbacks come in asking for more.
This lets us remove the halving of the buffer size during device open,
and also (hopefully) solves several strange hangs that happen in unusual
circumstances.
Fixes#4387Fixes#2262
* Read IMU scale data from Switch controllers. Up until now, SDL has used hard-coded scaling which isn't correct with some supported controllers.
* Moved declarations to beginning of code blocks to better fit with SDL style requirements
Ryan C. Gordon
Christoph Reichenbach
Sam Lantinga
David Gow
Ethan Lee
Guldoman
Cameron Cawley
Ozkan Sezer
Simon McVittie
Mathieu Eyraud
Ivan Le Lann
Christian Rauch
Pierre Wendling
Ivan Epifanov
Alex Szpakowski
Eddy Jansson
Michael Fitzmayer
Frank Richter
Alexander Kanavin
atfrase
emily
Susko3
Daniel Brookman
Jan200101
Carl Friess
Mirko Galimberti
FriendlyAI
Jibb Smart
Dimitriy Ryazantcev
meyraud705